Freelog Special Edition 1: Linux

home *** CD-ROM | disk | FTP | other *** search

/ Freelog Special Edition 1: Linux / CD1.iso / doc / HOWTO / NFS-HOWTO < prev next >

Wrap

Text File | 1998-10-14 | 39KB | 842 lines

NFS HOWTO Nicolai Langfeldt janl@math.uio.no v0.7, 3 November 1997 HOWTO set up NFS clients and servers. 1. Preamble 1.1. Legal stuff (C)opyright 1997 Nicolai Langfeldt. Do not modify without amending copyright, distribute freely but retain this paragraph. The FAQ section is based on a NFS FAQ compiled by Alan Cox. The Checklist section is based on a mount problem checklist compiled by the IBM Corporation. 1.2. Other stuff This will never be a finished document, please send me mail about your problems and successes, it can make this a better HOWTO. Please send money, comments and/or questions to janl@math.uio.no. If you send E- mail please make sure that the return address is correct and working, I get a lot of E-mail and figuring out your e-mail address can be a lot of work. Please. If you want to translate this HOWTO please notify me so I can keep track of what languages I have been published in :-). Curses and Thanks to Olaf Kirch who got me to write this and then gave good suggestions for it :-) This HOWTO covers NFS in the 2.0 versions of the kernel. There are significant enhancements, and changes, of NFS in the 2.1 versions of the kernel. 1.3. Dedication This HOWTO is dedicated to Anne Line Norheim Langfeldt. Though she will probably never read it since she's not that kind of girl. 2. README.first NFS, the Network File System has three important characteristics: ╖ It makes sharing of files over a network possible. ╖ It mostly works well enough. ╖ It opens a can of security risks that are well understood by crackers, and easily exploited to get access (read, write and delete) to all your files. I'll say something on both issues in this HOWTO. Please make sure you read the security section of this HOWTO, and you will be vulnerable to fewer silly security risks. The passages about security will at times be pretty technical and require some knowledge about IP networking and the terms used. If you don't recognize the terms you can either go back and check the networking HOWTO, wing it, or get a book about TCP/IP network administration to familiarize yourself with TCP/IP. That's a good idea anyway if you're administrating UNIX/Linux machines. A very good book on the subject is TCP/IP Network Administration by Craig Hunt, published by O'Reilly & Associates, Inc. And after you've read it and understood it you'll have higher value on the job market, you can't loose ;-) There are two sections to help you troubleshoot NFS, called Mount Checklist and FAQs. Please refer to them if something dosn't work as advertized. 3. Setting up a NFS server 3.1. Prerequisites Before you continue reading this HOWTO you will need to be able to telnet back and forth between the machine you're using as server and the client. If that does not work you need to check the networking/NET-2 HOWTO and set up networking properly. 3.2. First step Before we can do anything else we need a NFS server set up. If you're part of a department or university network there are likely numerous NFS servers already set up. If they will let you get access to them, or indeed, if you're reading this HOWTO to get access to one of them you obviously don't need to read this section and can just skip ahead to the section on ``setting up a NFS client'' If you need to set up a non-Linux box as server you will have to read the system manual(s) to discover how to enable NFS serving and export of file systems through NFS. There is a separate section in this HOWTO on how to do it on many different systems. After you have figured all that out you can continue reading the next section of this HOWTO. Or read more of this section since some of the things I will say are relevant no matter what kind of machine you use as server. Those of you still reading will need to set up a number of programs. 3.3. The portmapper The portmapper on Linux is called either portmap or rpc.portmap. The man page on my system says it is a "DARPA port to RPC program number mapper". It is the first security holes you'll open reading this HOWTO. Description of how to close one of the holes is in the ``security section''. Which I, again, urge you to read. Start the portmapper. It's either called portmap or rpc.portmap and it should live in the /usr/sbin directory (on some machines it's called rpcbind). You can start it by hand now, but it will need to be started every time you boot your machine so you need to make/edit the rc scripts. Your rc scripts are explained more closely in the init man page, they usually reside in /etc/rc.d, /etc/init.d or /etc/rc.d/init.d. If there is a script called something like inet it's probably the right script to edit. But, what to write or do is outside the scope of this HOWTO. Start portmap, and check that it lives by running ps aux. It does? Good. 3.4. Mountd and nfsd The next programs we need running are mountd and nfsd. But first we'll edit another file. /etc/exports this time. Say I want the file system /mn/eris/local which lives on the machine eris to be available to the machine called apollon. Then I'd put this in /etc/exports on eris: ______________________________________________________________________ /mn/eris/local apollon(rw) ______________________________________________________________________ The above line gives apollon read/write access to /mn/eris/local. Instead of rw it could say ro which means read only (if you put nothing it defaults to read only). There are other options you can give it, and I will discuss some security related ones later. They are all enumerated in the exports man page which you should have read at least once in your life. There are also better ways than listing all the hosts in the exports file. You can for example use net groups if you are running NIS (or NYS) (NIS was known as YP), and always specify domain wild cards and IP-subnets as hosts that are allowed to mount something. But you should consider who can get access to the server in unauthorized ways if you use such blanket authorizations. Note: This exports file is not the same syntax that other Unixes use. There is a separate section in this HOWTO about other Unixes exports files. Now we're set to start mountd (or maybe it's called rpc.mountd and then nfsd (which could be called rpc.nfsd). They will both read the exports file. If you edit /etc/exports you will have to make sure nfsd and mountd knows that the files have changed. The traditonal way is to run exportfs. Many Linux distributions lack a exportfs program. If you're exportfs-less you can install this script on your machine: ______________________________________________________________________ #!/bin/sh killall -HUP /usr/sbin/rpc.mountd killall -HUP /usr/sbin/rpc.nfsd echo re-exported file systems ______________________________________________________________________ Save it in, say, /usr/sbin/exportfs, and don't forget to chmod a+rx it. Now, whenever you change your exports file, you run exportfs after, as root. Now you should check that mountd and nfsd are running properly. First with rpcinfo -p. It should show something like this: ______________________________________________________________________ program vers proto port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100005 1 udp 745 mountd 100005 1 tcp 747 mountd 100003 2 udp 2049 nfs 100003 2 tcp 2049 nfs ______________________________________________________________________ As you see the portmapper has announced it's services, and so has mountd and nfsd. If you get rpcinfo: can't contact portmapper: RPC: Remote system error - Connection refused or something similar instead then the portmapper isn't running. Fix it. If you get No remote programs registered. then either the portmapper doesn't want to talk to you, or something is broken. Kill nfsd, mountd, and the portmapper and try the ignition sequence again. After checking that the portmapper reports the services you can check with ps too. The portmapper will continue to report the services even after the programs that extend them have crashed. So a ps check can be smart if something seems broken. Of course, you will need to modify your system rc files to start mountd and nfsd as well as the portmapper when you boot. It is very likely that the scripts already exist on your machine, you just have to uncomment the critical section or activate it for the correct init run levels. Man pages you should be familiar with now: portmap, mountd, nfsd, and exports. Well, if you did everything exactly like I said you should you're all set to start on the NFS client. 4. Setting up a NFS client First you will need a kernel with the NFS file system either compiled in or available as a module. This is configured before you compile the kernel. If you have never compiled a kernel before you might need to check the kernel HOWTO and figure it out. If you're using a very cool distribution (like Red Hat) and you've never fiddled with the kernel or modules on it (and thus ruined it ;-), nfs is likely automagicaly available to you. You can now, at a root prompt, enter a appropriate mount command and the file system will appear. Continuing the example in the previous section we want to mount /mn/eris/local from eris. This is done with this command: ______________________________________________________________________ mount -o rsize=1024,wsize=1024 eris:/mn/eris/local /mnt ______________________________________________________________________ (We'll get back to the rsize and wsize options.) The file system is now available under /mnt and you can cd there, and ls in it, and look at the individual files. You will notice that it's not as fast as a local file system, but a lot more convenient than ftp. If, instead of mounting the file system, mount produces a error message like mount: eris:/mn/eris/local failed, reason given by server: Permission denied then the exports file is wrong, or you forgot to run exportfs after editing the exports file. If it says mount clntudp_create: RPC: Program not registered it means that nfsd or mountd is not running on the server. To get rid of the file system you can say ______________________________________________________________________ umount /mnt ______________________________________________________________________ To make the system mount a nfs file system upon boot you edit /etc/fstab in the normal manner. For our example a line such as this is required: ______________________________________________________________________ # device mountpoint fs-type options dump fsckorder eris:/mn/eris/local /mnt nfs rsize=1024,wsize=1024 0 0 ______________________________________________________________________ That's all there is too it, almost. Read on please. 4.1. Mount options There are some options you should consider adding at once. They govern the way the NFS client handles a server crash or network outage. One of the cool things about NFS is that it can handle this gracefully. If you set up the clients right. There are two distinct failure modes: soft The NFS client will report and error to the process accessing a file on a NFS mounted file system. Some programs can handle this with composure, most won't. I cannot recommend using this setting. hard The program accessing a file on a NFS mounted file system will hang when the server crashes. The process cannot be interrupted or killed unless you also specify intr. When the NFS server is back online the program will continue undisturbed from where it were. This is probably what you want. I recommend using hard,intr on all NFS mounted file systems. Picking up the previous example, this is now your fstab entry: ______________________________________________________________________ # device mountpoint fs-type options dump fsckorder eris:/mn/eris/local /mnt nfs rsize=1024,wsize=1024,hard,intr 0 0 ______________________________________________________________________ 4.2. Optimizing NFS Normally, if no rsize and wsize options are specified NFS will read and write in chunks of 4096 or 8192 bytes. Some combinations of Linux kernels and network cards cannot handle that large blocks, and it might not be optimal, anyway. So we'll want to experiment and find a rsize and wsize that works and is as fast as possible. You can test the speed of your options with some simple commands. Given the mount command above and that you have write access to the disk you can do this to test the sequential write performance: ______________________________________________________________________ time dd if=/dev/zero of=/mnt/testfile bs=16k count=4096 ______________________________________________________________________ This creates a 64Mb file of zeroed bytes (which should be large enough that caching is no significant part of any performance perceived, use a larger file if you have a lot of memory). Do it a couple (5-10?) of times and average the times. It is the `elapsed' or `wall clock' time that's most interesting in this connection. Then you can test the read performance by reading back the file: ______________________________________________________________________ time dd if=/mnt/testfile of=/dev/null bs=16k ______________________________________________________________________ do that a couple of times and average. Then umount, and mount again with a larger rsize and wsize. They should probably be multiples of 1024, and not larger than 16384 bytes since that's the maximum size in NFS version 2. Directly after mounting with a larger size cd into the mounted file system and do things like ls, explore the fs a bit to make sure everything is as it should. If the rsize/wsize is too large the symptoms are very odd and not 100% obvious. A typical symptom is incomplete file lists when doing 'ls', and no error messages. Or reading files failing mysteriously with no error messages. After establishing that the given rsize/wsize works you can do the speed tests again. Different server platforms are likely to have different optimal sizes. SunOS and Solaris is reputedly a lot faster with 4096 byte blocks than with anything else. Newer Linux kernels (since 1.3 sometime) perform read-ahead for rsizes larger or equal to the machine page size. On Intel CPUs the page size is 4096 bytes. Read ahead will significantly increase the NFS read performance. So on a Intel machine you will want 4096 byte rsize if at all possible. Remember to edit /etc/fstab to reflect the rsize/wsize you found. A trick to increase NFS write performance is to disable synchronous writes on the server. The NFS specification states that NFS write requests shall not be considered finished before the data written is on a non-volatile medium (normally the disk). This restricts the write performance somewhat, asynchronous writes will speed NFS writes up. The Linux nfsd has never done synchronous writes since the Linux file system implementation does not lend itself to this, but on non- Linux servers you can increase the performance this way with this in your exports file: ______________________________________________________________________ /dir -async,access=linuxbox ______________________________________________________________________ or something similar. Please refer to the exports man page on the machine in question. Please note that this increases the risk of data loss. 5. NFS over slow lines Slow lines include Modems, ISDN and quite possibly other long distance connections. This section is based on knowledge about the used protocols but no actual experiments. My home computer has been down for 6 months (bad HD, low on cash) and so I have had no modem connection to test this with. Please let me hear from you if try this :-) The first thing to remember is that NFS is a slow protocol. It has high overhead. Using NFS is almost like using kermit to transfer files. It's slow. Almost anything is faster than NFS. FTP is faster. HTTP is faster. rcp is faster. ssh is faster. Still determined to try it out? Ok. NFS' default parameters are for quite fast, low latency, lines. If you use these default parameters over high latency lines it can cause NFS to report errors, abort operations, pretend that files are shorter than they really are, and act mysteriously in other ways. The first thing to do is not to use the soft mount option. This will cause timeouts to return errors to the software, which will, most likely not handle the situation at all well. This is a good way to get for mysterious failures. Instead use the hard mount option. When hard is active timeouts causes infinite retries instead of aborting whatever it was the software wanted to do. This is what you want. Really. The next thing to do is to tweak the timeo and retrans mount options. They are described in the nfs(5) man page, but here is a copy: ______________________________________________________________________ timeo=n The value in tenths of a second before sending the first retransmission after an RPC timeout. The default value is 7 tenths of a second. After the first timeout, the timeout is doubled after each successive timeout until a maximum timeout of 60 sec- onds is reached or the enough retransmis- sions have occured to cause a major time- out. Then, if the filesystem is hard mounted, each new timeout cascade restarts at twice the initial value of the previous cascade, again doubling at each retransmis- sion. The maximum timeout is always 60 seconds. Better overall performance may be achieved by increasing the timeout when mounting on a busy network, to a slow server, or through several routers or gate- ways. retrans=n The number of minor timeouts and retrans- missions that must occur before a major timeout occurs. The default is 3 timeouts. When a major timeout occurs, the file oper- ation is either aborted or a "server not responding" message is printed on the con- sole. ______________________________________________________________________ In other words: If a reply is not received within the 0.7 second (700ms) timeout the NFS client will repeat the request and double the timeout to 1.4 seconds. If the reply does not appear within the 1.4 seconds the request is repeated again and the timeout doubled again, to 2.8 seconds. A lines speed can be measured with ping with the same packet size as your rsize/wsize options. ______________________________________________________________________ $ ping -s 8192 lugulbanda PING lugulbanda.uio.no (129.240.222.99): 8192 data bytes 8200 bytes from 129.240.222.99: icmp_seq=0 ttl=64 time=15.2 ms 8200 bytes from 129.240.222.99: icmp_seq=1 ttl=64 time=15.9 ms 8200 bytes from 129.240.222.99: icmp_seq=2 ttl=64 time=14.9 ms 8200 bytes from 129.240.222.99: icmp_seq=3 ttl=64 time=14.9 ms 8200 bytes from 129.240.222.99: icmp_seq=4 ttl=64 time=15.0 ms --- lugulbanda.uio.no ping statistics --- 5 packets transmitted, 5 packets received, 0% packet loss round-trip min/avg/max = 14.9/15.1/15.9 ms ______________________________________________________________________ The time here is how long the ping packet took to get back and forth to lugulbanda. 15ms is quite fast. Over a 28.000 bps line you can expect something like 4000-5000ms, and if the line is otherwise loaded this time will be even higher, easily double. When this time is high we say that there is 'high latency'. Generally, for larger packets and for more loaded lines the latency will tend to increase. Increase timeo suitably for your line and load. And since the latency increases when you use the line for other things: If you ever want to use FTP and NFS at the same time you should try measuring ping times while using FTP to transfer files. 6. Security and NFS I am by no means a computer security expert. But I do have a little advice for the security conscious. But be warned: This is by no means a complete list of NFS related problems and if you think you're safe once you're read and implemented all this I have a bridge I want to sell you. This section is probably of no concern if you are on a closed network where you trust all the users, and no-one you don't trust can get access to machines on the network. I.e., there should be no way to dial into the network, and it should in no way be connected to other networks where you don't trust everyone using it as well as the security. Do you think I sound paranoid? I'm not at all paranoid. This is just basic security advice. And remember, the things I say here is just the start of it. A secure site needs a diligent and knowledgeable admin that knows where to find information about current and potential security problems. NFS has a basic problem in that the client, if not told otherwise, will trust the NFS server and vice versa. This can be bad. It means that if the server's root account is broken into it can be quite easy to break into the client's root account as well. And vice versa. There are a couple of coping strategies for this, which we'll get back to. Something you should read is the CERT advisories on NFS, most of the text below deals with issues CERT has written advisories about. See ftp.cert.org/01-README for a up to date list of CERT advisories. Here are some NFS related advisories: ______________________________________________________________________ CA-91:21.SunOS.NFS.Jumbo.and.fsirand 12/06/91 Vulnerabilities concerning Sun Microsystems, Inc. (Sun) Network File System (NFS) and the fsirand program. These vulnerabilities affect SunOS versions 4.1.1, 4.1, and 4.0.3 on all architectures. Patches are available for SunOS 4.1.1. An initial patch for SunOS 4.1 NFS is also available. Sun will be providing complete patches for SunOS 4.1 and SunOS 4.0.3 at a later date. CA-94:15.NFS.Vulnerabilities 12/19/94 This advisory describes security measures to guard against several vulnerabilities in the Network File System (NFS). The advisory was prompted by an increase in root compromises by intruders using tools to exploit the vulnerabilities. CA-96.08.pcnfsd 04/18/96 This advisory describes a vulnerability in the pcnfsd program (also known as rpc.pcnfsd). A patch is included. ______________________________________________________________________ 6.1. Client Security On the client we can decide that we don't want to trust the server too much a couple of ways with options to mount. For example we can forbid suid programs to work off the NFS file system with the nosuid option. This is a good idea and you should consider using this with all NFS mounted disks. It means that the server's root user cannot make a suid-root program on the file system, log in to the client as a normal user and then use the suid-root program to become root on the client too. We could also forbid execution of files on the mounted file system altogether with the noexec option. But this is more likely to be impractical than nosuid since a file system is likely to at least contain some scripts or programs that needs to be executed. You enter these options in the options column, with the rsize and wsize, separated by commas. 6.2. Server security: nfsd On the server we can decide that we don't want to trust the client's root account. We can do that by using the root_squash option in exports: ______________________________________________________________________ /mn/eris/local apollon(rw,root_squash) ______________________________________________________________________ Now, if a user with UID 0 on the client attempts to access (read, write, delete) the file system the server substitutes the UID of the servers `nobody' account. Which means that the root user on the client can't access or change files that only root on the server can access or change. That's good, and you should probably use root_squash on all the file systems you export. "But the root user on the client can still use 'su' to become any other user and access and change that users files!" say you. To which the answer is: Yes, and that's the way it is, and has to be with Unix and NFS. This has one important implication: All important binaries and files should be owned by root, and not bin or other non-root account, since the only account the clients root user cannot access is the servers root account. In the NFSd man page there are several other squash options listed so that you can decide to mistrust whomever you (don't) like on the clients. You also have options to squash any UID and GID range you want to. This is described in the Linux NFSd man page. root_squash is in fact the default with the Linux NFSd, to grant root access to a filesystem use no_root_squash. Another important thing is to ensure that nfsd checks that all it's requests comes from a privileged port. If it accepts requests from any old port on the client a user with no special privileges can run a program that's is easy to obtain over the Internet. It talks nfs protocol and will claim that the user is anyone the user wants to be. Spooky. The Linux nfsd does this check by default, on other OSes you have to enable this check yourself. This should be described in the nfsd man page for the OS. Another thing. Never export a file system to 'localhost' or 127.0.0.1. Trust me. 6.3. Server security: the portmapper The basic portmapper, in combination with nfsd has a design problem that makes it possible to get to files on NFS servers without any privileges. Fortunately the portmapper Linux uses is relatively secure against this attack, and can be made more secure by configuring up access lists in two files. First we edit /etc/hosts.deny. It should contain the line ______________________________________________________________________ portmap: ALL ______________________________________________________________________ which will deny access to everyone. That's a bit drastic perhaps, so we open it again by editing /etc/hosts.allow. But first we need to figure out what to put in it. It should basically list all machines that should have access to your portmapper. On a run of the mill Linux system there are very few machines that need any access for any reason. The portmapper administrates nfsd, mountd, ypbind/ypserv, pcnfsd, and 'r' services like ruptime and rusers. Of these only nfsd, mountd, ypbind/ypserv and perhaps pcnfsd are of any consequence. All machines that needs to access services on your machine should be allowed to do that. Let's say that your machines address is 129.240.223.254 and that it lives on the subnet 129.240.223.0 should have access to it (those are terms introduced by the networking HOWTO, go back and refresh your memory if you need to). Then we write ______________________________________________________________________ portmap: 129.240.223.0/255.255.255.0 ______________________________________________________________________ in hosts.allow. This is the same as the network address you give to route and the subnet mask you give to ifconfig. For the device eth0 on this machine ifconfig should show ______________________________________________________________________ eth0 Link encap:10Mbps Ethernet HWaddr 00:60:8C:96:D5:56 inet addr:129.240.223.254 Bcast:129.240.223.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:360315 errors:0 dropped:0 overruns:0 TX packets:179274 errors:0 dropped:0 overruns:0 Interrupt:10 Base address:0x320 ______________________________________________________________________ and netstat -rn should show ______________________________________________________________________ Kernel routing table Destination Gateway Genmask Flags Metric Ref Use Iface 129.240.223.0 0.0.0.0 255.255.255.0 U 0 0 174412 eth0 ______________________________________________________________________ (Network address in first column). The hosts.deny and hosts.allow files are described in the manual pages of the same names. IMPORTANT: Do not put anything but IP NUMBERS in the portmap lines of these files. Host name lookups can indirectly cause portmap activity which will trigger host name lookups which can indirectly cause portmap activity which will trigger... The above things should make your server tighter. The only remaining problem (Yeah, right!) is someone breaking root (or boot MS-DOS) on a trusted machine and using that privilege to send requests from a secure port as any user they want to be. 6.4. NFS and firewalls It's a very good idea to firewall the nfs and portmap ports in your router or firewall. The nfsd operates at port 2049, both udp and tcp protocols. The portmapper at port 111, tcp and udp, and mountd at port 745 and and 747, tcp and udp. Normally. You should check the ports with the rpcinfo -p command. If on the other hand you want NFS to go through a firewall there are options for newer NFSds and mountds to make them use a specific (nonstandard) port which can be open in the firewall. 6.5. Summary If you use the hosts.allow/deny, root_squash, nosuid and privileged port features in the portmapper/nfs software you avoid many of the presently known bugs in nfs and can almost feel secure about that at least. But still, after all that: When an intruder has access to your network, s/he can make strange commands appear in your /var/spool/mail are mounted over NFS. For the same reason, you should never access your PGP private key over nfs. Or at least you should know the risk involved. And now you know a bit of it. NFS and the portmapper makes up a complex subsystem and therefore it's not totally unlikely that new bugs will be discovered, either in the basic design or the implementation we use. There might even be holes known now, which someone is abusing. But that's life. To keep abreast of things like this you should at least read the newsgroups comp.os.linux.announce and comp.security.announce at a absolute minimum. 7. Mount Checklist This section is based on IBM Corp. NFS mount problem checklist. My thanks to them for making it available for this HOWTO. If you experience a problem mounting a NFS filesystem please refer to this list before posting your problem. Each item describes a failure mode and the fix. 1. File system not exported, or not exported to the client in question. Fix: Export it 2. Name resolution doesn't jibe with the exports list. e.g.: export list says export to johnmad but johnmad's name is resolved as johnmad.austin.ibm.com. mount permission is denied. Fix: Export to both forms of the name. It can also happen if the client has 2 interfaces with different names for each of the two adapters and the export only specifies one. Fix: export both interfaces. This can also happen if the server can't do a lookuphostbyname or lookuphostbyaddr (these are library functions) on the client. Make sure the client can do host <name>; host <ip_addr>; and that both shows the same machine. Fix: straighten out name resolution. 3. The file system was mounted after NFS was started (on that server). In that case the server is exporting underlying mount point, not the mounted filesystem. Fix: Shut down NFSd and then restart it. Note: The clients that had the underlying mount point mounted will get problems accessing it after the restart. 4. The date is wildly off on one or both machines (this can mess up make) Fix: Get the date set right. The HOWTO author recommends using NTP to synchronize clocks. Since there are export restrictions on NTP in the US you have to get NTP for debian, redhat or slackware from ftp://ftp.hacktic.nl/pub/replay/pub/linux or a mirror. 5. The server can not accept a mount from a user that is in more than 8 groups. Fix: decrease the number of groups the user is in or mount via a different user. 8. FAQs This is the FAQ section. Most of it was written by Alan Cox. 1. I get a lot of 'stale nfs handle' errors when using Linux as a nfs server. This is caused by a bug in some oldish nfsd versions. It is fixed in nfs-server2.2beta16 and later. 2. When I try to mount a file system I get can't register with portmap: system error on send You are probably using a Caldera system. There is a bug in the rc scripts. Please contact Caldera to obtain a fix. 3. Why can't I execute a file after copying it to the NFS server? The reason is that nfsd caches open file handles for performance reasons (remember, it runs in user space). While nfsd has a file open (as is the case after writing to it), the kernel won't allow you to execute it. Nfsds newer than spring 95 release open files after a few seconds, older ones would cling to them for days. 4. My NFS files are all read only The Linux NFS server defaults to read only. RTFM the ``exports'' and nfsd manual pages. You will need to alter /etc/exports. 5. I mount from a linux nfs server and while ls works I can't read or write files. On older versions of Linux you must mount a NFS servers with rsize=1024,wsize=1024. 6. I mount from a Linux NFS server with a block size of between 3500-4000 and it crashes the Linux box regularly Basically don't do it then. 7. Can Linux do NFS over TCP No, not at present. 8. I get loads of strange errors trying to mount a machine from a Linux box. Make sure your users are in 8 groups or less. Older servers require this. 9. When I reboot my machine it sometimes hangs when trying to unmount a hung NFS server. Do not unmount NFS servers when rebooting or halting, just ignore them, it will not hurt anything if you don't unmount them. The command is umount -avt nonfs. 10. Linux NFS clients are very slow when writing to Sun and BSD systems NFS writes are normally synchronous (you can disable this if you don't mind risking losing data). Worse still BSD derived kernels tend to be unable to work in small blocks. Thus when you write 4K of data from a Linux box in the 1K packets it uses BSD does this read 4K page alter 1K write 4K back to physical disk read 4K page alter 1K write 4K page back to physical disk etc.. 9. Exporting filesystems The way to export filesytems with NFS is not completely consistent across platforms of course. In this case Linux and Solaris 2 are the deviants. This section lists, superficially the way to do it on most systems. If the kind of system you have is not covered you must check your OS man-pages. Keywords are: nfsd, system administration tool, rc scripts, boot scripts, boot sequence, /etc/exports, exportfs. I'll use one example throughout this section: How to export /mn/eris/local to apollon read/write. 9.1. IRIX, HP-UX, Digital-UNIX, Ultrix, SunOS 4 (Solaris 1), AIX These OSes use the traditional Sun export format. In /etc/exports write: ______________________________________________________________________ /mn/eris/local -rw=apollon ______________________________________________________________________ The complete documentation is in the exports man page. After editing the file run exportfs -av to export the filesystems. How strict the exportfs command is about the syntax varies. On some OSes you will find that previously entered lines reads: ______________________________________________________________________ /mn/eris/local apollon ______________________________________________________________________ or even something degenerate like: ______________________________________________________________________ /mn/eris/local rw=apollon ______________________________________________________________________ I recommend being formal. You risk that the next version of exportfs if much stricter and then suddenly everything will stop working. 9.2. Solaris 2 Sun completely re-invented the wheel when they did Solaris 2. So this is completely different from all other OSes. What you do is edit the file /etc/dfs/dfstab. In it you place share commands as documented in the share(1M) man page. Like this: ______________________________________________________________________ share -o rw=apollon -d "Eris Local" /mn/eris/local ______________________________________________________________________ After editing run the program shareall to export the filesystems. 10. PC-NFS You should not run PC-NFS. You should run samba. Sorry: I don't know anything about PC-NFS. If someone feels like writing something about it please do and I'll include it here.