home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
hobbes.nmsu.edu
/
2008-06-02_hobbes.nmsu.edu.zip
/
dos
/
xgaibm.zip
/
xgademo.rme
next >
Wrap
Text File
|
1993-05-22
|
2KB
|
72 lines
IBM XGA-2 Butterfly Demo with New Graphic Images
------------------------------------------------
This package contains 10 zip files:
XGAIBM1.zipbin
XGAIBM2.zipbin
XGAIBM3.zipbin
XGAIBM4.zipbin
XGAIBM5.zipbin
XGAIBM6.zipbin
XGAIBM7.zipbin
XGAIBM8.zipbin
XGAIBM9.zipbin
XGAIBM10.zipbin
Procedure to set up demo:
1. Download each file in binary to your PC
2. Use PKUNZIP to decompress each file to diskette
Note: PKUNZIP is available from the PCTOOLS disk in package PKZIBM.
3. At the a:> type in install and follow directions
Prerequisites needed prior to installing demo:
Running under a DOS operating system
------------------------------------
Steps:
1. XGA or XGA-2 must be installed on your PS/2 system
2. the XGA DOS Adapter Interface (AI) driver must be installed;
this driver is available from the DISPLAY tools disk or
comes with the driver diskettes available with the XGA or
XGA-2 card
3. A 3MB RAMDRIVE (logical disk) must be set up;
add the following line to config.sys....
device=c:\dos\ramdrive.sys 3072 /e
Running under OS/2 2.0 operating system
-----------------------------------------
Steps:
- Follow step 1 and 2 as described under DOS procedure above
(demo runs from the DOS compatibility box in full screen)
- A 3MB logical disk needs to be set up;
add the following line to config.sys,
device=c:\OS2\vdisk 3072
------------------------------------------------------------------
Notes: 1. When running with XGA-2 ensure the DMQS files have been
properly installed. These are on the XGA-2
driver diskette and available from the DISPLAY tools disk.
2. To exit from demo, do the following:
hit: ctrl, then break key
type: y
hit: Enter
type mode co80
(should return to the c prompt screen)