home *** CD-ROM | disk | FTP | other *** search
/ The CDPD Public Domain Collection for CDTV 3 / CDPDIII.bin / pd / utilities / dirutils / megad / megad.doc < prev    next >
Encoding:
Text File  |  1992-09-13  |  153.3 KB  |  3,304 lines

  1.  
  2.  
  3.  
  4.  
  5.  
  6.  
  7.  
  8.  
  9.  
  10.  
  11.  
  12.  
  13.  
  14.  
  15.  
  16.  
  17.  
  18.  
  19.  
  20.                 MegaD 2.00 Copyright © 1990, 1991, 1992 John L. Jones
  21.                                 All Rights Reserved.
  22.  
  23.                        My appreciation to the below mentioned
  24.  
  25.           Through the years of my obsession with this beast (MegaD), there
  26.           are three who have always been by my side.
  27.  
  28.                Kathy
  29.                My loving wife for 17 years
  30.                     Who, still is not quite sure what MegaD does.  Yet she
  31.                     will give it a chance.  I know this because, she has
  32.                     not taken a sludge hammer to the two Amiga Computers we
  33.                     have.
  34.  
  35.                Christina
  36.                My daughter, 15
  37.                     Who, simply accepts me for what I am.  Who, gives me
  38.                     many reasons to be proud of her.
  39.  
  40.                Benjamin
  41.                My son, 13
  42.                     Who, is my little buddy.  Who, will be taller than me
  43.                     by the time I finish this program.  Who, will pay me
  44.                     back, for all the things I did to my parents as I grew
  45.                     up.
  46.  
  47.           All three have bared with me through the years, I love each of
  48.           them with all of my heart.
  49.  
  50.  
  51.  
  52.  
  53.  
  54.                         Acknowledgments to the beta testers.
  55.  
  56.           Richard Brady                    Andrew Porter
  57.           Salt Lake City, Utah, USA        Etobicode, Ontario, Canada
  58.  
  59.           David Cole                       Scott Reynolds
  60.           Albuquerque, New Mexico, USA     West Valley City, Utah, USA
  61.  
  62.           Blaine Gardner                   Micheal Salls
  63.           Bountiful, Utah, USA             Salt Lake City, Utah, USA
  64.  
  65.           Terry Fisher                     Ron Sudweeks
  66.           West Jordan, Utah, USA           Salt Lake City, Utah, USA
  67.  
  68.           Bob Krusinski                    Rodney Volkmar
  69.           Littelon, Colorado, USA          State Line, Nevada, USA
  70.  
  71.           Tim Madden                       Jeff Wagg
  72.           Bountiful, Utah, USA             Salt Lake City, Utah, USA
  73.  
  74.           Doug Nakakihara
  75.           Simi Valley, California, USA   
  76.  
  77.           A very special thanks goes to the below mentioned.
  78.  
  79.           Chris Hopps
  80.           Roayal Oak, Michigan
  81.                Who wrote the compile time library, "MemLib".  This library
  82.                does two things for the user, One: prevent memory
  83.                fragmentation.  Two: guarantees that when you quit MegaD,
  84.                All memory used by MegaD will be returned to the system.
  85.  
  86.           Sebastiano Vigna
  87.           Milano, Italy
  88.                A programer, whom I admire.  He is the author of Leggi,
  89.                SuperDuper, Mostra and many others.  If you like the fact
  90.                the MegaD supports screen fonts and text fonts in the menus
  91.                and windows,  you can thank him for pushing for it.  If you
  92.                like the way MegaD can copies large files from one floppy
  93.                disk drive to another, at great speeds, you can thank him
  94.                for supplying me the example code of how it can be done. 
  95.                Along with this, he has given me many suggestions to think
  96.                about, work on, and include with MegaD.
  97.  
  98.           Steve Tibbett
  99.                Another noted programer on the Amiga.  Steve, was willing
  100.                to take time from his busy schedule to look over MegaD.  He
  101.                offered, comments, complaints and suggestions.  Though I
  102.                doubt I have won him over from DiskMaster II, he was still
  103.                very helpful.
  104.  
  105.           I am sure that I have overlooked some, who have helped me in one
  106.           way or another with this project.  If I have, please forgive me,
  107.           and accept this as that thanks.
  108.  
  109.  
  110.  
  111.  
  112.  
  113.  
  114.  
  115.  
  116.  
  117.                                      DISCLAIMER
  118.                                ----------------------
  119.           No warranties are implied or expressed with regard to the fitness
  120.           or merchantability of MegaD for any particular purpose.  All
  121.           risks and damages, incidental or otherwise, arising through  the
  122.           use or misuse of MegaD are entirely at the responsibility of the
  123.           user.
  124.  
  125.           While considerable effort has been made to provide you with a
  126.           reliable product, there is no guarantee that this program is 100%
  127.           "bug-free".  Any problems that do arise will be corrected when
  128.           and if feasible.  Maintenance releases will be made available in
  129.           order to correct potentially hazardous malfunctions within the
  130.           program.  Fixes for benign problems, usually cosmetic in nature,
  131.           will most likely be deferred until the next major release of
  132.           MegaD.  This disclaimer does not guarantee future versions of
  133.           this product, only a prescribed method of dealing with possible
  134.           errors, and their corrections, to this program.
  135.  
  136.                                   More Legal Stuff
  137.                           ---------------------------------
  138.  
  139.           MegaD Shareware version is freely distributable as long as all
  140.           of the following conditions  are met:
  141.  
  142.                1.   All copyright notices must remain unaltered.
  143.  
  144.                2.   MegaD may not appear on shareware or public domain
  145.                     disks for which the consumers are charged more than a
  146.                     reasonable disk copying fee of seven dollars per disk.
  147.  
  148.                3.   MegaD may not appear on any electronic agency which
  149.                     charges more than the basic access fee to down-load
  150.                     MegaD.
  151.  
  152.                4.   MegaD may not appear on any electronic agency that
  153.                     claims copyrights to uploaded programs, either alone or
  154.                     as part of a collection.
  155.  
  156.                5.   MegaD may not be sold commercially alone or as a
  157.                     element in another product.
  158.  
  159.                6.   All of the files must be included in their original
  160.                     form without additions, deletions, or modifications of
  161.                     any kind.  Any such modifications must appear in
  162.                     separate files.
  163.  
  164.           If you would like a variance to any of the above conditions,
  165.           please contact me.
  166.  
  167.  
  168.  
  169.  
  170.  
  171.  
  172.  
  173.  
  174.  
  175.  
  176.  
  177.  
  178.  
  179.  
  180.  
  181.  
  182.  
  183.  
  184.  
  185.  
  186.  
  187.  
  188.  
  189.  
  190.  
  191.  
  192.  
  193.  
  194.  
  195.                        A special thank you to Timothy Madden.
  196.  
  197.                   He offered to put this document together for me.
  198.  
  199.               What he had to work with, were very simple and incomplete
  200.           descriptions that I had prepared as a Beta Document.  During his
  201.           attempt to prepare this document, I kept changing MegaD, making a
  202.                                  tough task, harder.
  203.  
  204.  
  205.  
  206.  
  207.  
  208.  
  209.  
  210.  
  211.  
  212.  
  213.  
  214.  
  215.  
  216.  
  217.  
  218.  
  219.  
  220.  
  221.  
  222.  
  223.  
  224.  
  225.  
  226.  
  227.  
  228.  
  229.                                       MegaD 2.0
  230.                                   By John L. Jones
  231.  
  232.  
  233.  
  234.                            The Best Directory Utility Ever
  235.                              Made for the Amiga Computer
  236.  
  237.  
  238.                             User Guide and Documentation
  239.  
  240.  
  241.  
  242.                              Prepared By Timothy Madden
  243.  
  244.  
  245.  
  246.  
  247.  
  248.  
  249.                                                             Introduction  1
  250.  
  251.  
  252.  
  253.                               INTRODUCTION
  254.                               ============
  255.  
  256.                               Welcome to MegaD, the best directory utility
  257.                               ever written for the Amiga computer. 
  258.                               Although there are many programs to
  259.                               manipulate files and directories, none of
  260.                               them incorporates the versatility and power
  261.                               of MegaD.  Unlike other services of this
  262.                               nature, MegaD is not restricted to only two
  263.                               disk directories at one time.  You can now
  264.                               have as many as the memory on your computer
  265.                               will allow.  You can copy files from one
  266.                               source to multiple targets.  It can be
  267.                               configured to run external programs such as
  268.                               picture viewer with the click of a button.
  269.  
  270.                               This manual and the MegaD.Tutorial manual
  271.                               will explain to you how to do it all.  It
  272.                               will get you into the program and guide you
  273.                               through all the features.  It will comment on
  274.                               the advantages and disadvantages of each of
  275.                               these features.  Explanations as to why the
  276.                               feature was added will be given.  Examples on
  277.                               topics that may confuse you abound.
  278.  
  279.      Two Manuals              This manual is too the point.  It offers
  280.                               short descriptions for both the commands and
  281.                               settings of MegaD.  The MegaD.Tutorial file
  282.                               was designed to take you step by step through
  283.                               the all of the functions and preferences
  284.                               settings of MegaD.  If this is the your first
  285.                               time behind the wheel of MegaD, I suggest
  286.                               that you start with the MegaD.Tutorial file. 
  287.                               If you like to jump into a program, get lost
  288.                               somewhere (as I do), and then read the
  289.                               manual, this is your best choice.
  290.  
  291.                               Read on and prepare to be taken into new
  292.                               realms of imagination.
  293.  
  294.  
  295.  
  296.  
  297.  
  298.  
  299.  
  300.  
  301.  
  302.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  303.                                        Document Prepared by  Timothy Madden
  304.  
  305.  
  306.  
  307.  
  308.  
  309.                                                             Introduction  2
  310.  
  311.  
  312.      Starting MegaD           MegaD can be started from either the Command
  313.                               Line Interface (CLI), or from Workbench.  To
  314.                               start it from the CLI, change the current
  315.                               directory to the directory MegaD is installed. 
  316.                               Type:
  317.                                    run MegaD <return>
  318.                               Workbench users should open the drawer to the
  319.                               MegaD icon.  Double click the icon with the left
  320.                               mouse button.
  321.  
  322.                               Once MegaD is started, a window titled 'MegaD'
  323.                               will open (See Figure 1-1).  This is the command
  324.                               window and it is the control center for the
  325.                               program.  All program functions can be accessed
  326.                               through this window.
  327.      -----------------------------------------------------------------
  328.      |MegaD 2.0 Control Window                                       |
  329.      |---------------------------------------------------------------|
  330.      | Free Volumes    |()   Volumes In Memory                    |  |
  331.      |------------------------------------------------------------|  |
  332.      | First  Buffered Volume           DF0:           648,324    |  |--1
  333.      | Second Buffered Volume           DF1:           232,987    |/\|
  334.      | Third  Buffered Volume          WORK:        22,343,548    |\/|
  335.      |---------------------------------------------------------------|
  336.      |**|   Device Gadget 1 |  Device Gadget 4    |  Device Gadget 7 |
  337.      |**|-------------------+---------------------+------------------|
  338.      |  |   Device Gadget 2 |  Device Gadget 5    |  Device Gadget 8 |
  339.      |  |-------------------+---------------------+------------------|--2
  340.      |  |   Device Gadget 3 |  Device Gadget 6    |  Device Gadget 9 |
  341.      |  |-------------------+----------------------------------------|
  342.      |  |      Device Name: |                                        |
  343.      |  |------------------------------------------------------------|
  344.      |**| Files Selected                       Chip                  |
  345.      |**| Dir.  Selected                       Fast                  |
  346.      |  | Bytes Selected                       Large                 |--3
  347.      |**| Free Disk space                      Total                 |
  348.      |**| Active Directory                                           |
  349.      |---------------------------------------------------------------|
  350.      | Keypad '('   | Keypad ')'   | Keypad '/'   | Keypad '*'   |   |
  351.      |--------------+--------------+--------------+--------------| C |
  352.      | Keypad '7'   | Keypad '8'   | Keypad '9'   | Keypad '-'   | - |
  353.      |--------------+--------------+--------------|--------------|   |
  354.      | Keypad '4'   | Keypad '5'   | Keypad '6'   | Keypad '+'   | S |--4
  355.      |--------------+--------------+--------------+--------------| - |
  356.      | Keypad '1'   | Keypad '2'   | Keypad '3'   |              |   |
  357.      |-----------------------------+--------------|    ENTER     | A |
  358.      |          Keypad '0'         | Keypad '.'   |              |   |
  359.      ----------------------------------------------------------------- 
  360.                                   Figure 1-1
  361.  
  362.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  363.                                        Document Prepared by  Timothy Madden
  364.  
  365.  
  366.  
  367.  
  368.  
  369.                                                             Introduction  3
  370.  
  371.  
  372.  
  373.  
  374.      Using MegaD              MegaD is different from most other Amiga
  375.                               directory utilities in that it can display
  376.                               more than two directories at a time.  In
  377.                               fact, it can display as many directories as
  378.                               desired within the limits of available
  379.                               memory.  Once a directory had been read, it
  380.                               remains in memory.  This saves time as you
  381.                               move in and out of directories on different
  382.                               volumes.  It is possible to select files and
  383.                               directories on disks that are not in any disk
  384.                               drive.
  385.  
  386.      The Main Window          There are 18 command gadgets in the main
  387.                               window (See figure 2-1).  These do common
  388.                               functions such as copy, delete, or rename
  389.                               files.  They also let you create new
  390.                               directories,  view text files, set protection
  391.                               bits, and find files.  On the right hand side
  392.                               are three special gadgets labeled C, S, and
  393.                               A.  The letters correspond to the Control,
  394.                               Shift, and Amiga keys.  When you click once
  395.                               on one of these gadgets or holds down the
  396.                               respective key, a new set of 18 command
  397.                               gadgets can be selected.  Therefore, there
  398.                               are 72 possible command gadgets to chose
  399.                               from.
  400.      |---------------------------------------------------------------|
  401.      | Keypad '('   | Keypad ')'   | Keypad '/'   | Keypad '*'   |   |
  402.      |--------------+--------------+--------------+--------------| C |
  403.      | Keypad '7'   | Keypad '8'   | Keypad '9'   | Keypad '-'   | - |
  404.      |--------------+--------------+--------------|--------------|   |
  405.      | Keypad '4'   | Keypad '5'   | Keypad '6'   | Keypad '+'   | S |--4
  406.      |--------------+--------------+--------------+--------------| - |
  407.      | Keypad '1'   | Keypad '2'   | Keypad '3'   |              |   |
  408.      |-----------------------------+--------------|    ENTER     | A |
  409.      |          Keypad '0'         | Keypad '.'   |              |   |
  410.      -----------------------------------------------------------------
  411.                               Figure 2-1
  412.  
  413.                               The main window includes a list area
  414.                               controlled by a cycle gadget in the upper
  415.                               right hand corner (See figure 2-2).  Clicking
  416.                               once on this gadget with the left mouse
  417.                               button toggles it between 'Volumes in Memory'
  418.                               and 'Devices, Assigns, and Includes'.  This
  419.                               gadget controls the display below it.  The
  420.                               first option lists any directory or volume
  421.  
  422.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  423.                                        Document Prepared by  Timothy Madden
  424.  
  425.  
  426.  
  427.  
  428.  
  429.                                                             Introduction  4
  430.  
  431.  
  432.                               that has been previously read into a buffer
  433.                               in memory.  The second option  lists all
  434.                               logical and physical devices as well as
  435.                               assigns available to the computer.
  436.      |---------------------------------------------------------------|
  437.      | Free Volumes    |()  Volumes In Memory                     |  |
  438.      |------------------------------------------------------------|  |
  439.      | First  Buffered Volume           DF0:           648,324    |  |--1
  440.      | Second Buffered Volume           DF1:           232,987    |/\|
  441.      | Third  Buffered Volume          WORK:        22,343,548    |\/|
  442.      |---------------------------------------------------------------|
  443.                               Figure 2-2
  444.                                 
  445.                               Depending on the state of the cycle gadget,
  446.                               the display window shows either the volumes
  447.                               in memory or the devices that can be
  448.                               accessed.  The scroll bar to the right can be
  449.                               moved with the left mouse button to show more
  450.                               items above or below.  Double clicking with
  451.                               the left mouse button on one or more of these
  452.                               items opens a window with the files and
  453.                               subdirectories for that device.  If the files
  454.                               on that device has already been read into a
  455.                               buffer, the contents of the buffer will be
  456.                               displayed.  Because of the multitasking
  457.                               nature of the Amiga computer and the fact
  458.                               that other programs can alter the files on a
  459.                               device, the buffer may not reflect the
  460.                               current status of the device.  MegaD has ways
  461.                               to solve this problem which will be explained
  462.                               below.
  463.  
  464.                               In the upper left hand corner of the main
  465.                               window is a gadget labeled 'Free Volumes'. 
  466.                               Clicking on it with the left mouse button
  467.                               will empty all buffers for the volumes in
  468.                               memory.  This is one way of updating the
  469.                               status of a volume or device.  This will also
  470.                               free memory for other applications.
  471.  
  472.  
  473.  
  474.  
  475.  
  476.  
  477.  
  478.  
  479.  
  480.  
  481.  
  482.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  483.                                        Document Prepared by  Timothy Madden
  484.  
  485.  
  486.  
  487.  
  488.  
  489.                                                             Introduction  5
  490.  
  491.  
  492.      |---------------------------------------------------------------|
  493.      |**|   Device Gadget 1 |  Device Gadget 4    |  Device Gadget 7 |
  494.      |**|-------------------+---------------------+------------------|
  495.      |  |   Device Gadget 2 |  Device Gadget 5    |  Device Gadget 8 |
  496.      |  |-------------------+---------------------+------------------|--2
  497.      |  |   Device Gadget 3 |  Device Gadget 6    |  Device Gadget 9 |
  498.      |  |-------------------+----------------------------------------|
  499.      |  |      Device Name: |                                        |
  500.      |  |------------------------------------------------------------|
  501.                               Figure 2-3
  502.  
  503.                               In the middle of the main window is a string
  504.                               gadget labeled "Device Name:".  When the box
  505.                               to the right of the label is clicked with the
  506.                               left mouse button, a logical or physical
  507.                               device can be typed into it.  For example, to
  508.                               open a window to the Amiga C: directory, the
  509.                               box is clicked and 'C:' is typed followed by
  510.                               a return.  A window to that directory is then
  511.                               opened.  If the device is already in a
  512.                               buffer, the contents of the buffer are
  513.                               displayed.
  514.  
  515.                               Above the string gadget is a collection of
  516.                               User-Specified gadgets (See figure 2-3).  The
  517.                               function of these gadgets can be toggled
  518.                               between command and device gadgets with the
  519.                               Utilities in Window menu option.  Device
  520.                               gadgets act as quick access buttons for
  521.                               loading directory windows with logical and
  522.                               physical devices.
  523.  
  524.                               Command gadgets can be set up to run
  525.                               virtually any sort of external program.  The
  526.                               implementation of a user function with these
  527.                               gadgets is explained in the tutorial.  The
  528.                               default setting are the commonly used archive
  529.                               and compression programs.
  530.  
  531.  
  532.  
  533.  
  534.  
  535.  
  536.  
  537.  
  538.  
  539.  
  540.  
  541.  
  542.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  543.                                        Document Prepared by  Timothy Madden
  544.  
  545.  
  546.  
  547.  
  548.  
  549.                                                             Introduction  6
  550.  
  551.  
  552.  
  553.      |  |------------------------------------------------------------|
  554.      |**| Files Selected                       Chip                  |
  555.      |**| Dir.  Selected                       Fast                  |
  556.      |  | Bytes Selected                       Large                 |--3
  557.      |**| Free Disk space                      Total                 |
  558.      |---------------------------------------------------------------|
  559.                               Figure 2-4
  560.  
  561.                               Below the string gadget is selected
  562.                               files/directory and  memory information (See
  563.                               Figure 2-4).  Selected files and directories,
  564.                               total bytes selected and the active directory is
  565.                               displayed on the left-hand column of the text
  566.                               area.  The right-hand column displays the current
  567.                               memory available on the system.
  568.  
  569.                               Files Selected and Dir. Selected tells you how
  570.                               many files and directories have been selected in
  571.                               all open windows.  Bytes Selected totals the size
  572.                               of these items.  The Free Disk space denotes the
  573.                               unused space for the destination.  On the line
  574.                               beneath this one is the current selected window
  575.                               indicator.  This reflects the active window the
  576.                               mouse is on or was last active.  It usually
  577.                               denotes the destination or target directory for
  578.                               most command operations.  This information is
  579.                               very important if you are copying, moving, or
  580.                               creating a new directory.  Using all of these
  581.                               elements you can decide whether the selected
  582.                               files will fit on the destination floppy or
  583.                               other device.
  584.  
  585.                               Clicking with the left mouse button anywhere on
  586.                               these indicators will toggle them between Items
  587.                               selected and Source Items.  Source items show how
  588.                               many files and directories will be copied to the
  589.                               destination window.
  590.  
  591.                               Several small box gadgets with horizontal lines
  592.                               through them appear next to the User-Specified,
  593.                               command, and string gadgets.  Clicking once with
  594.                               the left mouse button on one of these boxes with
  595.                               hide or reveal the gadget next to it.  You can
  596.                               make the main window as simple or complex as
  597.                               desired.  The settings of the hide gadgets are
  598.                               saved so that the next time you run the program,
  599.                               the main window reflects the conditions of the
  600.                               last session.
  601.  
  602.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  603.                                        Document Prepared by  Timothy Madden
  604.  
  605.  
  606.  
  607.  
  608.  
  609.                                                             Introduction  7
  610.  
  611.  
  612.  
  613.      Directory Windows         This is a character representation of the
  614.                               directory window.
  615.                                                           
  616.           ------------------------
  617.           | Workbench2.0:     |#|@|<- Top window drag bar, close and
  618.           |-----------------------|   Zoom Gadgets
  619.           | Parent / |Dest|Lock|  |<- Parent, Destination, Lock gadgets
  620.           |--------------------|  |
  621.           | C                  |  |
  622.           | Devs               |  |
  623.           | Expansion          |  |
  624.           | Fonts              |  |
  625.           | L                  |  |
  626.           | Libs          <---------- Scrolling list area.
  627.           | monitors           |  |
  628.           | Prefs              |  |
  629.           | Rexxc              |  |
  630.           | S                  |  |
  631.           | System             |  |
  632.           | Trashcan           |  |
  633.           | Utilities          |  |
  634.           | WBStartup          |  |
  635.           | disk.info          |  |
  636.           | Expansion.info     |  |
  637.           | Monitors.info      |  |
  638.           | Prefs.info         |  |
  639.           | Shell.info         |  |
  640.           | System.info        |  <- Vertical scrolling gadget
  641.           | Trashcan.info      |  |
  642.           | Utilities.info     |  |
  643.           | WBstartup.info     |  |
  644.           |                    |  |
  645.           ----------------------/\|<- Up arrow
  646.           |               |<|>| \/|<- Left, Right, Down arrow
  647.           ------------------------    and horizonal scrolling gadget
  648.  
  649.      Directory Windows        Clicking on either a user gadget or an entry
  650.                               in the device list will open a window listing
  651.                               files and directories.  Any file or directory
  652.                               can be selected by clicking on it with the
  653.                               left mouse button.  Directories can be opened
  654.                               to a new window if available (see Use  Limits
  655.                               menu option below) or replacing the current
  656.                               directory.
  657.  
  658.                               Directory windows are of two types: source
  659.                               and destination.  Source windows are origin
  660.                               of an action and destination windows are the
  661.  
  662.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  663.                                        Document Prepared by  Timothy Madden
  664.  
  665.  
  666.  
  667.  
  668.  
  669.                                                             Introduction  8
  670.  
  671.  
  672.                               target.  For example, selected files are in
  673.                               the source window, and the destination window
  674.                               is where they are to be copied.
  675.  
  676.                               Destination windows have the DEST gadget at
  677.                               the top of the window selected.  This is
  678.                               generally the last active window.  Clicking
  679.                               once with the left mouse button on the DEST
  680.                               gadget will cause an outline to appear around
  681.                               the gadget.
  682.                               The window is now set as a destination, and
  683.                               will remain so until the gadget is clicking
  684.                               again.  In this way multiple targets can be
  685.                               set.
  686.  
  687.                               The LOCK gadget to right of the DEST gadget
  688.                               keeps the window open.  Clicking once with
  689.                               the left mouse button will set it.  Once set,
  690.                               MegaD cannot replace the current directory in
  691.                               this window and is forced to use another
  692.                               window.
  693.  
  694.                               On the left of the DEST gadget is the PARENT
  695.                               gadget.  Clicking on this with the left mouse
  696.                               button will open a new window with the
  697.                               directory above, if it exists.  Clicking on
  698.                               this gadget in the root directory of a device
  699.                               has no effect.
  700.  
  701.  
  702.  
  703.  
  704.  
  705.  
  706.  
  707.  
  708.  
  709.  
  710.  
  711.  
  712.  
  713.  
  714.  
  715.  
  716.  
  717.  
  718.  
  719.  
  720.  
  721.  
  722.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  723.                                        Document Prepared by  Timothy Madden
  724.  
  725.  
  726.  
  727.  
  728.  
  729.                                              Main Window Default Gadgets  9
  730.  
  731.                               Main Window Default Gadgets
  732.                               ===========================
  733.  
  734.      ABoot Add  
  735.      (Add to Autoboot)        ABoot Add requires one executable and at
  736.                               least two data files to be selected before it
  737.                               will create an AutoBoot.  After the autoboot
  738.                               has been created any file matching either the
  739.                               extension or data within will automatically
  740.                               start the appropriate program by double
  741.                               clicking that file type.  Multiple selections
  742.                               are now allowed.
  743.  
  744.                               A very powerfully requestor is used for Add
  745.                               to Autoboot, User Gadgets and Menu sets.  And
  746.                               extensive discussion of that requestor can be
  747.                               found in the MegaD.Tutorial file by searching
  748.                               for the string:
  749.  
  750.                                    "Program Control Window"
  751.  
  752.                               The reading of this section of the tutorial
  753.                               is a must if you want to harness the control
  754.                               of external programs through MegaD.
  755.  
  756.      ABoot Edit
  757.      (Edit Autoboot)          Allows you to change the parameters of an
  758.                               AutoBoot program.  It will actually take you
  759.                               to the preference Keypad window.  This window
  760.                               offers a great deal of editing power over
  761.                               many areas of MegaD.
  762.  
  763.      Clear  All               Unselects all items in open directory
  764.                               windows.
  765.      Clr ABoot                Clear Items in open directory windows by use
  766.                               of the AutoBoot parameters.  This command is
  767.                               very disk intensive.
  768.  
  769.      Clr Src                  Clears selected items in all windows  where
  770.                               the  'Dest'ination gadget is not set.
  771.  
  772.      ClrSrcDir                Clears source directory items in all open
  773.                               windows.
  774.                                  
  775.      ClrSrcFile               Clears source file items in all open windows.
  776.  
  777.      Clr Dir                  Clears directory items in all open windows.
  778.  
  779.      Clr Files                Clear marks on all files items in all open
  780.                               windows   
  781.  
  782.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  783.                                        Document Prepared by  Timothy Madden
  784.  
  785.  
  786.  
  787.  
  788.  
  789.                                        Auto Boot Program Control Window  10
  790.  
  791.                                  
  792.      Clr Pattern              Clear selected items by use of a pattern
  793.                               match. It will bring up a window for setting
  794.                               match by NAME, DATE, PROTECTION and SIZE. It
  795.                               will select from all windows if ALL gadget is
  796.                               selected or else only in the DEST directory.
  797.                               Remember, you must activate the filter you
  798.                               want with the gadget marked activate.  You
  799.                               can mix the filters so that a selection can
  800.                               be made from any set of criteria.
  801.                                 
  802.      Copy                     This will copy selected files and/or
  803.                               directories to the destination directory
  804.                               window or windows. The destination  windows
  805.                               will all have the DEST gadget pressed in.
  806.                               Note: while using this program it is a good
  807.                               idea to keep windows from covering the title
  808.                               bar.
  809.  
  810.                               Copy will check to see if the selected file
  811.                               or files will fit onto the destination disk. 
  812.                               If not it will inform you that insufficient
  813.                               space is available on the destination disk. 
  814.                               You will be able to force MegaD to continue
  815.                               with the copy or move if necessary. Before
  816.                               starting you will be requested with a window
  817.                               to be sure you want to do this. It will show
  818.                               the number of files and directories selected
  819.                               and the destination directories name that the
  820.                               files will be copied to.
  821.  
  822.      Copy As                  This is the same as copy except that you
  823.                               change the name of the file during the copy.
  824.  
  825.      Copy/Format              This calls the external disk copy and
  826.                               formatting program.
  827.                                 
  828.      Create Dir               This will create a new sub-directory in the
  829.                               active directory window.  A request window
  830.                               will open and ask to input the name of the
  831.                               sub-directory to add to the active directory.
  832.                               OK and ABORT gadgets are available here.
  833.                                 
  834.      Delete                   This will Delete all files and directories
  835.                               marked whether the directory window is active
  836.                               or not.  Before this action starts you will
  837.                               be given one last chances to stop files from
  838.                               being deleted.  A window will pop up and ask
  839.                               "Delete ## Files and Directories?" Select YES
  840.                               or NO to continue with what ever actions are
  841.  
  842.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  843.                                        Document Prepared by  Timothy Madden
  844.  
  845.  
  846.  
  847.  
  848.  
  849.                                        Auto Boot Program Control Window  11
  850.  
  851.                               desired. If items are selected in more than
  852.                               one window Extra information will be
  853.                               displayed in the window "Delete Will Remove
  854.                               Items From ## Windows. Continue?". Once a
  855.                               file is deleted there is little chance to
  856.                               retrieve it with conventional methods!
  857.  
  858.                               WATCH OUT!!!!!!!!!!!!!!!!!!!!!  
  859.                               MegaD delete works on all open directory
  860.                               windows NOT JUST DESTINATION windows.  If you
  861.                               are deleting out of more than one window it
  862.                               will tell you so in a requester.
  863.                                 
  864.      Duplicate                Duplicate file or directory when you supply a
  865.                               name. It will replace another file if it
  866.                               exists. If the option to warn if replacing
  867.                               newer file is set, you will get a requester
  868.                               stating so.
  869.                                 
  870.  
  871.      Export File              Creates a database export file for use with
  872.                               you favorite database.
  873.  
  874.      File Comment             This works much the same as Rename mentioned
  875.                               above. It is used to alter the File Comment
  876.                               stored within the directory structure of the
  877.                               disk. If items are selected in open directory
  878.                               windows MegaD will open a requester to input
  879.                               or change the current File Comment on the
  880.                               selected file. If the Skip gadget is hit or a
  881.                               return is made on an unchanged string gadget
  882.                               MegaD will not changed the file comment.
  883.                               Blanking out the string and pressing return
  884.                               or hitting the OK gadgets will erase the file
  885.                               comment on that file or directory.  You will
  886.                               be able to tell all files that have a file
  887.                               comment by an '*' just after the column in
  888.                               the directory windows that contain the
  889.                               filename. The '*' is visible  file comment is
  890.                               attached to a file or directory unless the
  891.                               comment field is visible.  This way you are
  892.                               always aware that a comment has been place on
  893.                               any displayed file.
  894.                                
  895.      Filters +                See Sel Pattern below.
  896.                                
  897.      Filters -                Removes all current filters.   
  898.                                
  899.      Find                     This works different from the below mentioned
  900.                               Select From Pattern option in that does not
  901.  
  902.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  903.                                        Document Prepared by  Timothy Madden
  904.  
  905.  
  906.  
  907.  
  908.  
  909.                                        Auto Boot Program Control Window  12
  910.  
  911.                               look in the open directory windows to find a
  912.                               match and it will look though all directories
  913.                               even if it is hidden by the Hide menu
  914.                               options. Find will search though volumes
  915.                               selected in the Volumes in Memory List .  It
  916.                               will start from the first file in the volume
  917.                               and search though the volume until it ether
  918.                               find a match for the string entered in the
  919.                               string gadget or finds the last directory
  920.                               item on the volume.  If a match is found a
  921.                               message will be displayed and you will be
  922.                               asked if you want to continue.  If you answer
  923.                               no to the query  you will be able to use the
  924.                               information displayed in the message window
  925.                               to find the file. It will also create a very
  926.                               nice file of all found items on a volume (if
  927.                               volume is selected in the Volume in Memory
  928.                               list) or it will search selected directories. 
  929.                               This is accomplished by filling the 'Path and
  930.                               filename for items found' string gadget   A
  931.                               file will be created of all directory items
  932.                               matching the select criteria.  If matched
  933.                               items were found it will also open a text
  934.                               window to display that list.
  935.                                
  936.      Go Deep                  This will load all sub directories in a
  937.                               marked volume or directory. This is useful
  938.                               for finding the actual size of any directory
  939.                               as long as SIZE is being shown in the window.
  940.                                
  941.      Iconify                  This will create an AppIcon if you are
  942.                               running version 2.0 or higher of the Amiga
  943.                               operating system. Drop a volume or drawer
  944.                               from the Workbench on the MegaD icon and it
  945.                               will come to life with that volume loaded. If
  946.                               Activate AutoBoot is checked in the option
  947.                               menu it will load text files or check
  948.                               AutoBoot defined parameters to call another
  949.                               program.  There is also an option that will
  950.                               leave the icon out at all times whether you
  951.                               iconify the program or not.  If MegaD is on
  952.                               the Workbench the control window is an
  953.                               AppWindow so you can drag and drop icons on
  954.                               it.
  955.  
  956.      Label                    Print disk labels.  If items are selected it
  957.                               will create and print the label if no items
  958.                               are selected it will open a window for you to
  959.                               input the information to print.
  960.                                
  961.  
  962.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  963.                                        Document Prepared by  Timothy Madden
  964.  
  965.  
  966.  
  967.  
  968.  
  969.                                        Auto Boot Program Control Window  13
  970.  
  971.      Label Align              Print dots to the printer to help align the
  972.                               label.  The dots should be just above the
  973.                               label and the label should be centered
  974.                               between the dots.
  975.      Lab. Modify              Automatic labels with an option to modify the
  976.                               printed lines before it reaches the printers.
  977.                                
  978.      Label Times              Same as Label but give the option for
  979.                               duplicate labels.
  980.                                
  981.      Move                     Move works identical to copy except that it
  982.                               will remove the old files or directories once
  983.                               they have been placed successfully in the new
  984.                               directory.  If the file is to be moved from
  985.                               directory to directory on the same volume, it
  986.                               will simply rename the file or directory to
  987.                               the new place on the disk.  Before starting
  988.                               you will be requested with a window to be
  989.                               sure you want to do this.  It will show the
  990.                               number of files and directories selected and
  991.                               the destination directories name.
  992.                               NOTE:  Copy and Move will not move a
  993.                               directory to a sub-directory of itself.
  994.                                 
  995.      Move As                  Same as Move with new filename option.
  996.  
  997.      Output File              Creates a directory list of selected items
  998.                               and directories.  If a directory is selected
  999.                               it will list all items and sub-directories in
  1000.                               the list.  The current display information
  1001.                               will be include in this list.  (ie. Size and
  1002.                               date will be printed if they are displayed in
  1003.                               the directory windows.)
  1004.  
  1005.      Output Ptr               Same as Output, only to the printer
  1006.                                
  1007.      Prt Text                 Sends selected text files to the spooler.
  1008.                                
  1009.      Quit                     Exits MegaD.
  1010.                                
  1011.      Relabel                  Relabel a marked volume in the Volume in
  1012.                               Memory list.  (OS version 2.0 only)
  1013.                                
  1014.      Rename                   This will rename any file or directory name
  1015.                               to what ever valid filename you wish to
  1016.                               change it to.  A window will open with three
  1017.                               boolean Gadgets (OK, ABORT, and SKIP) and one
  1018.                               string gadget.  This string gadget will hold
  1019.                               the current name of the file that was found
  1020.                               selected in any open directory window.  At
  1021.  
  1022.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1023.                                        Document Prepared by  Timothy Madden
  1024.  
  1025.  
  1026.  
  1027.  
  1028.  
  1029.                                        Auto Boot Program Control Window  14
  1030.  
  1031.                               this point you will have three options:
  1032.                               Change the name of the file, Skip to the next
  1033.                               selected item, or Abort the rename option.
  1034.                                 
  1035.      Save Defaults            Write MegaD preference file as "megad2.pf". 
  1036.                                
  1037.      Set Defaults             Open MegaD prefs window for defining Menu
  1038.                               sets and device gadgets.  Includes gadgets to
  1039.                               go to other default windows for other
  1040.                               settings such as Colors, Displays, Defaults,
  1041.                               Keypad.
  1042.  
  1043.      Search Text              This will search selected text files for a
  1044.                               string.  It has an option to write all
  1045.                               information to a text file to create a list
  1046.                               of strings that have been found.
  1047.      Select All               This will select all directory items in all
  1048.                               open directory windows, excluding the Volumes
  1049.                               in Memory window or the device window.
  1050.                                 
  1051.      Sel ABoot                This option will open a window displaying all
  1052.                               of the MegaD Auto Boot parameters available. 
  1053.                               By selecting individual Auto Boot parameters
  1054.                               and then closing the window, MegaD will
  1055.                               search the header information of each file in
  1056.                               the open directory windows to see if they
  1057.                               match the Auto Boot definitions.  So if you
  1058.                               have an Auto Boot parameter that will
  1059.                               recognize sound samples and select that
  1060.                               parameter, MegaD will then select all sound
  1061.                               files in the open directory window.  Select
  1062.                               directory items by use of the AutoBoot
  1063.                               parameters.  This is very disk intensive.
  1064.                                 
  1065.      Sel Src                  Select all items in source windows.
  1066.  
  1067.      SelSrcDir                Select Directories in source windows.
  1068.  
  1069.      SelSrcFile               Select Files in source Windows.
  1070.                                  
  1071.      Sel Dir                  Select Directories in all open windows.
  1072.                                 
  1073.      Sel File                 Select Files in all open windows.
  1074.                                 
  1075.      Sel Pattern              This option will open a window with a string
  1076.                               input gadget.  You can select a directory
  1077.                               item by name by typing the name to search for
  1078.                               in the open directory windows.  If found it
  1079.                               will mark that item as selected.  Pattern
  1080.                               matching is supported.  AmigaDOS pattern
  1081.  
  1082.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1083.                                        Document Prepared by  Timothy Madden
  1084.  
  1085.  
  1086.  
  1087.  
  1088.  
  1089.                                        Auto Boot Program Control Window  15
  1090.  
  1091.                               matching is a combination of alphanumeric
  1092.                               characters and  a series of special token
  1093.                               characters.  These token characters denote
  1094.                               such things as wildcards, repetitions, and
  1095.                               negation.  Valid patterns under AmigaDos 2.0
  1096.                               are as follows:
  1097.  
  1098.                               ?    The question mark matches any single
  1099.                               character.  For example, "A?B" will match any
  1100.                               files with a three letter name that begins
  1101.                               with "A" and ends with "B".
  1102.  
  1103.                               #    The number sign matches strings
  1104.                               containing one or more repetitions of the
  1105.                               expression immediately following the # sign.
  1106.                                For example, "#A" will match any file name
  1107.                               consisting of one or more "A"'s. "#?" will
  1108.                               match any non-blank file name.
  1109.  
  1110.                               %    The percent sign matches a blank.
  1111.  
  1112.                               |    This is the OR symbol.  This matches
  1113.                               file names on either side of this symbol. 
  1114.                               The expressions and the OR symbol must be
  1115.                               enclosed in parentheses.  For example,
  1116.                               "(A|B)" will match "A" or "B".  "A(B|%|C)"
  1117.                               will match "AB", "A", or "AC".
  1118.  
  1119.                               ~    The tilde negates the expression
  1120.                               following it.  All file names that do not
  1121.                               match this expression are selected.  For
  1122.                               example, ~(A) will match all files that DO
  1123.                               NOT begin with "A".
  1124.  
  1125.                               []   Brackets are used to group a range of
  1126.                               characters.  For example, [A-D]#? will match
  1127.                               all file names beginning with the letters "A"
  1128.                               through "D".
  1129.  
  1130.                               All patterns can be used in combination with
  1131.                               each other, thus giving you the option of
  1132.                               selecting a group of files or directory with
  1133.                               similar characteristics.
  1134.  
  1135.      NOTE:                    An extensive discussion of the Filter
  1136.                               requestor window can be found in the
  1137.                               MegaD.Tutorial document by searching for this
  1138.                               string: 
  1139.  
  1140.                                    "Filters and Pattern Matching"
  1141.  
  1142.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1143.                                        Document Prepared by  Timothy Madden
  1144.  
  1145.  
  1146.  
  1147.  
  1148.  
  1149.                                        Auto Boot Program Control Window  16
  1150.  
  1151.  
  1152.                               To understand the functions
  1153.                               'Sel/Clr Pattern', 'Find' and 'Filter' the
  1154.                               reading of this section is a must.
  1155.                                 
  1156.      Set Protect              This works much the same as the Rename option
  1157.                               above except that it works with the
  1158.                               protection bits of the file.  There will be
  1159.                               eight small gadgets in the center of the
  1160.                               request window.  The gadgets will be marked ?
  1161.                               s p a r w e d.  When the window opens the
  1162.                               flag gadgets will reflect the way the flags
  1163.                               are at the moment for the current selected
  1164.                               file.  By turning these gadgets off and on
  1165.                               the bits can be changed on the file.  The
  1166.                               letters stand for:
  1167.  
  1168.                               d = Deletable
  1169.                               e = Execute
  1170.                               w = Writable
  1171.                               r = Readable
  1172.                               a = Archive
  1173.                               p = Pure
  1174.                               s = Script
  1175.                               ? = Were not sure
  1176.  
  1177.                               Commodore/Amiga at one time defined the ? bit
  1178.                               as 'h' for hidden.  This, now, is not
  1179.                               supported.  At the time the final bit is
  1180.                               defined, MegaD  will be modified correctly.
  1181.  
  1182.                               You will also find the gadget ALL in this
  1183.                               window.  If this gadget is used, all selected
  1184.                               items in open directory windows will have the
  1185.                               protection flags changes to way that the
  1186.                               flags are set in the window.  This saving the
  1187.                               time to set each directory item one at a
  1188.                               time.
  1189.  
  1190.      Set Protect Deep         Should you want to set the directory flag
  1191.                               deep within a selected directory you may do
  1192.                               so.  To accomplish this select the directory
  1193.                               that you wish to change all items and
  1194.                               sub-directories in.  Select the Use gadgets
  1195.                               for Set Protect.  A small request window will
  1196.                               open asking "Would you also like to set all
  1197.                               items in directory DIRECTORY-NAME"?  Answer
  1198.                               Yes to this request and MegaD will set all
  1199.                               flags deep within this directory.  Answer No
  1200.  
  1201.  
  1202.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1203.                                        Document Prepared by  Timothy Madden
  1204.  
  1205.  
  1206.  
  1207.  
  1208.  
  1209.                                        Auto Boot Program Control Window  17
  1210.  
  1211.                               and only the directory entry itself will be
  1212.                               changed.
  1213.                                 
  1214.      Update Dir               Due to the dynamic nature of the Amiga
  1215.                               computer a directory can be changed or even
  1216.                               deleted by any other program.  If the
  1217.                               validity of a directory is in question use
  1218.                               this to update the directory to the current
  1219.                               state.  If the directory that the window
  1220.                               displays has been removed, the directory
  1221.                               window will be removed from the screen. 
  1222.                               Those directory items that have been added or
  1223.                               deleted will be reflected.  If you want to
  1224.                               resort a directory by a different attribute,
  1225.                               set the sort flags in the Show menu and use
  1226.                               update.  If Sort on None is used no sorting
  1227.                               is done so little if any change will be
  1228.                               shown.
  1229.  
  1230.      View Text                This will open a new window to view any text
  1231.                               file marked in any open directory window or
  1232.                               windows.  It will first check to see if the
  1233.                               marked file is a text file.  If it is not
  1234.                               sure what type of a file it is it will open a
  1235.                               request window and ask, "Not True Text File.
  1236.                                Load Anyway?" Clicking on the yes gadget
  1237.                               will allow the program to load the file.  It
  1238.                               will be placed in HEX mode.  The text viewer
  1239.                               will only display the true ASCII characters
  1240.                               of the file.  A window will open with a
  1241.                               scroll bar on the right and bottom to
  1242.                               manipulate the position you would like to be
  1243.                               in the file.  This window will stay open
  1244.                               until the Close Window gadget of the window
  1245.                               is selected or the close window option is
  1246.                               selected.
  1247.  
  1248.                               If you wish to view more than one file at a
  1249.                               time, simply select more than one text file
  1250.                               from any of the open directory windows. 
  1251.                               MegaD View Text is designed just like the
  1252.                               directory windows to allow an unlimited
  1253.                               number of text files to be viewed at one
  1254.                               time.  The only limitation is available
  1255.                               memory in the machine at the time.
  1256.                                
  1257.                               All of the directory options and windows are
  1258.                               active even if a text window is open on the
  1259.                               screen.  So if you want to open another text
  1260.  
  1261.  
  1262.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1263.                                        Document Prepared by  Timothy Madden
  1264.  
  1265.  
  1266.  
  1267.  
  1268.  
  1269.                                        Auto Boot Program Control Window  18
  1270.  
  1271.                               window select that file in the directory
  1272.                               window and select View Text again.
  1273.  
  1274.                               There is a completely new menu to select from
  1275.                               within the text windows.  Text and background
  1276.                               color can be selected to suit your taste. 
  1277.                               The whole file can be printed or just the
  1278.                               part visible in the window.  Page up, page
  1279.                               down, side to side and top to bottom of file
  1280.                               commands are here.  Search for a string with
  1281.                               or without a pattern match and repeat last
  1282.                               search.  The cursor keys will act on the file
  1283.                               in the direction you wish to move.
  1284.  
  1285.                               The Numeric Keypads Home(7), End(1), PgUp(9) 
  1286.                               and PgDn(3) will move you within the text
  1287.                               file.  Home will move you to the first of the
  1288.                               file.  End will move you to the end of the
  1289.                               file, PgUp will move you one page (Window
  1290.                               size) up and PgDn will move you one page
  1291.                               (Window size) down.  The '.' key on the
  1292.                               keypad will open a requestor to enter a
  1293.                               search string.  The '0' key will repeat the
  1294.                               last search.  By using the F7 function key
  1295.                               you will be able to bring any open text
  1296.                               window to the front of the screen.  If more
  1297.                               than one text window is open you can toggle
  1298.                               between the windows by using the F7 key to
  1299.                               cycle though the text windows.  Save Defaults
  1300.                               will save the  last Search String used.  If
  1301.                               non-text is selected it will load it and
  1302.                               display in HEX.
  1303.  
  1304.  
  1305.  
  1306.  
  1307.  
  1308.  
  1309.  
  1310.  
  1311.  
  1312.  
  1313.  
  1314.  
  1315.  
  1316.  
  1317.  
  1318.  
  1319.  
  1320.  
  1321.  
  1322.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1323.                                        Document Prepared by  Timothy Madden
  1324.  
  1325.  
  1326.  
  1327.  
  1328.  
  1329.                                                             MegaD Menus  19
  1330.  
  1331.                               MegaD Menus
  1332.                               ===========
  1333.  
  1334.                               MegaD has seven pull-down menus.  They are
  1335.                               Project, Windows, Utilities, Options, Show,
  1336.                               Output, and Panic.  They group together
  1337.                               related functions.  All menus can be accessed
  1338.                               by holding down the right mouse button and
  1339.                               moving the mouse pointer to the top of the
  1340.                               screen, and then over the desired item.  An
  1341.                               alternate method to accomplish this is with
  1342.                               keyboard shortcuts.  Thirty-four of the menu
  1343.                               items have equivalent keyboard shortcuts
  1344.                               listed on the right side.
  1345.  
  1346.      Project Menu             The Project menu contains functions that
  1347.                               apply to the overall operation of MegaD.  It
  1348.                               contains the Autoboot editing feature, which
  1349.                               is unique to this Amiga directory utility. 
  1350.                               It has elements for changing the look and
  1351.                               feel of the program.  You can get information
  1352.                               about the author of MegaD.  And finally, it
  1353.                               includes a way to exit the program.
  1354.  
  1355.      Project,
  1356.      Add to Autoboot          The Add to Autoboot brings up a window that
  1357.                               allows you to add calls to external programs
  1358.                               by selecting the program to be called and any
  1359.                               data files that may use it.  For example, you
  1360.                               may select three picture files and a viewer.
  1361.                                Adding  these to Autoboot will run the
  1362.                               viewer when any similar picture file is
  1363.                               double clicked with the left mouse button. 
  1364.                               Autoboot will be explained in greater detail
  1365.                               in its own section below.
  1366.  
  1367.      Project,
  1368.      Edit Autoboot            Edit Autoboot lets you reconfigure these
  1369.                               calls or change the way MegaD operates with
  1370.                               the program.  MegaD will remain active during
  1371.                               all external function calls.  You may want to
  1372.                               add flags to the program when MegaD calls it. 
  1373.                               As there is much to explain about Autoboot,
  1374.                               again, it has been left to another section.
  1375.  
  1376.      Project,
  1377.      Set Preferences          Set Preferences allows you to change the
  1378.                               User-Specified menus as well as alter colors,
  1379.                               display resolution, gadget text, and setting
  1380.                               for windows and messages.  If you wish MegaD
  1381.  
  1382.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1383.                                        Document Prepared by  Timothy Madden
  1384.  
  1385.  
  1386.  
  1387.  
  1388.  
  1389.                                                             MegaD Menus  20
  1390.  
  1391.                               to open its own screen instead of a window on
  1392.                               Workbench, here is where you set that up.  It
  1393.                               also has the User-Specified gadgets which are
  1394.                               set up similar to Autoboots.  As with
  1395.                               Autoboot, this is another feature to be
  1396.                               described in its own section.
  1397.  
  1398.      Project,
  1399.      Save Preferences         Save Preferences permanently stores the
  1400.                               settings to disk.  They are read in the next
  1401.                               time MegaD is started.  MegaD can be adjusted
  1402.                               to suit the individual user and made to stay
  1403.                               that way.  However, you may experiment with
  1404.                               MegaDs' settings before you find ones that
  1405.                               fit your preferences.  During this time it is
  1406.                               best to keep the special flag set "Save
  1407.                               Defaults at closing".  This forces the
  1408.                               current defaults to be save each time you
  1409.                               quit MegaD.  You can return to the previous
  1410.                               settings by exiting the program if you did
  1411.                               not use Save Defaults.
  1412.  
  1413.      Project,
  1414.      Color                    This opens a window that allows you to set
  1415.                               the colors used by MegaD.  It is best to have
  1416.                               the screen set to the color depth that you
  1417.                               want to run within.  MegaD supports 4/8/16
  1418.                               colors screens.  The depth of the screen is
  1419.                               changed within the Display menu item.
  1420.  
  1421.      Project,
  1422.      Display                  This opens a window that allows you to set
  1423.                               the screen type and depth.  It allows you to
  1424.                               set the date format to use within MegaD
  1425.                               directory windows.  It also allows you to set
  1426.                               the thousand separator for numerical figures
  1427.                               such as size.
  1428.  
  1429.      Project,
  1430.      Defaults                 This opens one of two windows that you may
  1431.                               access to set various default settings for
  1432.                               MegaD.  Settings such as "Iconify at start",
  1433.                               "Save Defaults at closing",  "Dictionary
  1434.                               filename"....
  1435.  
  1436.      Project,
  1437.      Keypads                  This opens a window for editing the Keypad
  1438.                               command gadgets and is also the place to edit
  1439.                               AutoBoots.  You can create and edit User
  1440.                               Gadgets.  It will also allow you to edit
  1441.  
  1442.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1443.                                        Document Prepared by  Timothy Madden
  1444.  
  1445.  
  1446.  
  1447.  
  1448.  
  1449.                                                             MegaD Menus  21
  1450.  
  1451.                               your Menu Sets and User gadgets.  You can set
  1452.                               colors for specific command gadgets.  This is
  1453.                               a very powerful window that allows setting
  1454.                               and editing many of the aspect of MegaD.
  1455.  
  1456.      Project,
  1457.      About                    About opens a window with information about
  1458.                               the program and author.  It displays the
  1459.                               version number of MegaD so that you can
  1460.                               determine whether or not certain features
  1461.                               exist.  It is also useful for identifying the
  1462.                               latest revision of the program.  The author's
  1463.                               name and address appear in case you would
  1464.                               like contact him with problems or
  1465.                               suggestions.
  1466.  
  1467.      Project,
  1468.      Quit                     Quit exits MegaD and frees all memory used by
  1469.                               it.  A small requester window appears asking
  1470.                               you to confirm this action.  Clicking once
  1471.                               with the left mouse button on the Yes gadget
  1472.                               will end MegaD.  The same click on the No
  1473.                               gadget will cancel the request to quit.
  1474.  
  1475.      Windows Menu             The Windows menu items control the location,
  1476.                               size, and number of the directory windows. 
  1477.                               Through this menu the windows can be made to
  1478.                               overlap one another or sit on an invisible
  1479.                               grid.  The grid can control the size of each
  1480.                               window.  Since many people find multiple
  1481.                               windows confusing at first, the number of
  1482.                               windows can be limited.
  1483.  
  1484.      Windows,
  1485.      Open Windows             Open Windows has two options.  The first
  1486.                               opens all windows that have been opened at
  1487.                               least once.  It will respect the Limit
  1488.                               settings if that is set on.
  1489.  
  1490.                               The second option opens windows only for
  1491.                               selected directories in the windows.
  1492.  
  1493.      Windows,
  1494.      Close Windows            Close Windows is the opposite of Open
  1495.                               Windows.  It has two options as well.
  1496.  
  1497.      Windows,
  1498.      Use Overlap Locations    Overlap Locations deals with where the
  1499.                               windows will appear.  This option opens a new
  1500.                               window on top of but offset the height of the
  1501.  
  1502.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1503.                                        Document Prepared by  Timothy Madden
  1504.  
  1505.  
  1506.  
  1507.  
  1508.  
  1509.                                                             MegaD Menus  22
  1510.  
  1511.                               top window border and to the right of the
  1512.                               last window.  Overlapping the windows allows
  1513.                               for more files to be shown in large
  1514.                               directories.
  1515.  
  1516.      Windows,
  1517.      Use Grid                 Use Grid Locations tells MegaD to open new
  1518.                               windows on an invisible grid.  Restricting
  1519.                               windows to a grid helps by not hiding titles
  1520.                               underneath other windows.  All titles are
  1521.                               visible so a desired directory can be found
  1522.                               without shuffling windows around the screen. 
  1523.                               The size of the grid is shown in the menu
  1524.                               item above this one.  Selecting this item
  1525.                               will let you change the values.
  1526.  
  1527.      Windows,
  1528.      Set Snapshot             Set Snapshot records the position of open
  1529.                               directory windows for use with the "Use
  1530.                               Snapshot" window positions.
  1531.  
  1532.      Windows,
  1533.      Use Snapshot             Use Snapshot, uses the fixed position the
  1534.                               directory windows were in when the Set
  1535.                               Snapshot menu items was selected.  The
  1536.                               Snapshot position are used on a first come
  1537.                               first serve basis.  Unlike the Overlap and
  1538.                               Grid options which keep volumes aligned in
  1539.                               columns.
  1540.  
  1541.      Windows,
  1542.      Use Limits               Use Limits allows you to restrict the number
  1543.                               of windows MegaD has open at any one time. 
  1544.                               The use of limits helps to avoid confusion
  1545.                               when there are many large windows overlapping
  1546.                               each other.  It will also help put off low
  1547.                               memory situations.  The menu item above this
  1548.                               one shows the present window limitations. 
  1549.                               You can modify these values by selecting it. 
  1550.                               The values entered here also define the size
  1551.                               of the grid for the "Use Grid" setting.
  1552.  
  1553.      Windows,
  1554.      Two Window Utility       Two Window Utility will change MegaD into the
  1555.                               more familiar directory program with two
  1556.                               windows.  The main window functions are moved
  1557.                               to the bottom of the screen.  The windows are
  1558.                               split by button gadgets for devices.  These
  1559.                               device gadgets have a right and left half. 
  1560.                               The right half affects the right window and
  1561.  
  1562.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1563.                                        Document Prepared by  Timothy Madden
  1564.  
  1565.  
  1566.  
  1567.  
  1568.  
  1569.                                                             MegaD Menus  23
  1570.  
  1571.                               the left half the left.  If one window shows
  1572.                               a directory and the opposite is empty, the
  1573.                               contents of the directory will be swapped to
  1574.                               the empty window when you select the side of
  1575.                               a button gadget coinciding with the non-empty
  1576.                               window.  If both window have valid directory
  1577.                               list in them and you request one of those
  1578.                               directories in the opposite window, both list
  1579.                               will be swapped to the opposite windows.
  1580.  
  1581.      Utilities Menu           The Utilities menu permits you to pick
  1582.                               User-Specified actions such as un-archiving a
  1583.                               file.  It holds five sets of definitions. 
  1584.                               There are menu items to shift between each
  1585.                               set.  They may be placed in the main window
  1586.                               for easier access.  In addition to the menu
  1587.                               sets, a disk copy and format program may be
  1588.                               called from this menu.
  1589.  
  1590.                               The menus are preset to the Zoo, Arc, and
  1591.                               LhArc.  Any of them can be modified to your
  1592.                               current favorite set of archiving programs. 
  1593.                               They need not even be set as archiving
  1594.                               functions.  The can be set to any type of
  1595.                               function you wish them to be.  The menus are
  1596.                               set up as groups of five functions.  You may
  1597.                               create as many sets of menu you want but only
  1598.                               one of the user defined menu will be
  1599.                               displayed and available at one time.
  1600.  
  1601.                               Since this menu may be customize to whatever
  1602.                               the you prefer, the default settings will be
  1603.                               discussed.  The utilities are not included
  1604.                               with MegaD, however, they may be found on any
  1605.                               public access bulletin board system (BBS).
  1606.  
  1607.                               The first menu set controls the Zoo archiving
  1608.                               program.  Zoo was commonly used for all files
  1609.                               on the Amiga a few years ago, but has since
  1610.                               lost out to faster programs that produce
  1611.                               smaller output files.  The top item in this
  1612.                               set will compress selected items in all
  1613.                               windows to the destination directory.  The
  1614.                               next object will unpack all marked files to
  1615.                               the destination window.  The third element
  1616.                               will list the files that make up an archive.
  1617.  
  1618.                               The next menu set is for the arc program. 
  1619.                               Arc is even older than zoo.  It suffers from
  1620.                               a number of problems such as the inability to
  1621.  
  1622.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1623.                                        Document Prepared by  Timothy Madden
  1624.  
  1625.  
  1626.  
  1627.  
  1628.  
  1629.                                                             MegaD Menus  24
  1630.  
  1631.                               handle file names longer than eight
  1632.                               characters.  Despite this, you may still find
  1633.                               a need for it.  The top component of this set
  1634.                               will add the highlighted files to an archive
  1635.                               in the destination window.  The next one down
  1636.                               will unarchive the selected files to the
  1637.                               destination directory.  The last item lists
  1638.                               the contents of the selected archive.
  1639.  
  1640.                               The third menu set has the most recent
  1641.                               compression program called LhArc.  This
  1642.                               utility is faster than zoo or arc, and does
  1643.                               not suffer the problems of either older
  1644.                               programs.  The highest in the list of this
  1645.                               set adds the marked files to an archive in
  1646.                               the destination window.  The middle item will
  1647.                               extract files from the highlighted archive to
  1648.                               the destination.  The lowest item displays
  1649.                               the files contained in the archive.
  1650.  
  1651.  
  1652.      Utilities,
  1653.      Utilities in Window      Utilities in Window, when a check mark is
  1654.                               visible to the left of the item will put the
  1655.                               desired menu set in the main window.  It
  1656.                               replaces the buttons with the devices.  If
  1657.                               you access a particular menu set or sets
  1658.                               frequently, this function may help speed the
  1659.                               results.  The check mark can be turn off and
  1660.                               on by reselecting this menu item.
  1661.  
  1662.      Utilities,
  1663.      Copy/Format              Copy/Format calls an external program to
  1664.                               duplicate or prepare a floppy for use.  MegaD
  1665.                               will use MDdisk by default.  This program is
  1666.                               included with MegaD.  If you would like to
  1667.                               use a different utility, you can specify it
  1668.                               in the MegaD Preference, Set Defaults window.
  1669.  
  1670.      Options Menu             The Options menu controls what common
  1671.                               information is to be displayed in a directory
  1672.                               window.  Only 'Dest'ination  windows are
  1673.                               immediately updated.  This can be used to
  1674.                               clean up windows and make them easier to
  1675.                               read.  Icon files may be removed from view. 
  1676.                               Standard Amiga directories such as C can be
  1677.                               made invisible so that the interesting files
  1678.                               are more apparent.  Filters for files with
  1679.                               common attributes like C language source code
  1680.                               '.c' are easy to build so that they will show
  1681.  
  1682.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1683.                                        Document Prepared by  Timothy Madden
  1684.  
  1685.  
  1686.  
  1687.  
  1688.  
  1689.                                                             MegaD Menus  25
  1690.  
  1691.                               up by themselves.  Icons files may be copied
  1692.                               with the file they represent.  Files may be
  1693.                               copied exactly as they appear in the source
  1694.                               directory.
  1695.  
  1696.      Options,
  1697.      Select All Hide          Select All Hide clears window displays of
  1698.                               icon .INFO files and Amiga default assigns. 
  1699.                               The check mark will appear on Hide .INFO,
  1700.                               Hide Amiga Directories, Hide C Directory menu
  1701.                               items below.  It acts as a fast global method
  1702.                               of removing standard files and directories.
  1703.  
  1704.      Options,
  1705.      Clear All Hide           Clear All Hide causes the .INFO icon files
  1706.                               and Amiga assigns to appear in the windows. 
  1707.                               The check mark will be removed from the menu
  1708.                               items below that correspond to these actions.
  1709.                                It is the opposite of Select All Hide and is
  1710.                               a quick way of undoing a global hide.
  1711.  
  1712.      Options,
  1713.      Hide .INFO               Hide .INFO eliminates all icon files from the
  1714.                               window displays.  Icon files are pictures
  1715.                               which relate to a data or program file with
  1716.                               the same name.  The Amiga operating system
  1717.                               adds a .info extension to the name of the
  1718.                               icon.  Removing icons wipes out duplicate
  1719.                               information.
  1720.  
  1721.      Options,
  1722.      Hide Amiga Directories   Hide Amiga directories seeks out all standard
  1723.                               Amiga directories, such as DEVS, FONT, and L,
  1724.                               LIB, and S.  The Amiga assigns these
  1725.                               directories automatically upon booting and
  1726.                               they appear on all bootable disks.  Taking
  1727.                               them off the display clears unnecessary data.
  1728.  
  1729.      Options,
  1730.      Hide C Directory         Hide C directory removes the Amiga C: (or any
  1731.                               directory named 'c') from the window display.
  1732.  
  1733.      Options,
  1734.      Filter Directory         Filter directory brings up a window with ten
  1735.                               cycle gadgets, five string gadgets, and five
  1736.                               button gadgets.  It allows you to display
  1737.                               only those files which match a pattern.  This
  1738.                               pattern can be applied to only the active
  1739.                               window or to all windows.  The five cycle
  1740.                               gadgets to the farthest left let you set the
  1741.  
  1742.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1743.                                        Document Prepared by  Timothy Madden
  1744.  
  1745.  
  1746.  
  1747.  
  1748.  
  1749.                                                             MegaD Menus  26
  1750.  
  1751.                               pattern to match a file name, date,
  1752.                               protection bits, or size.  You type the
  1753.                               pattern to match into the string gadgets.
  1754.  
  1755.      Options,
  1756.      Remove all filters       This removes both global filters and filters
  1757.                               defined for specific directories created by
  1758.                               the Filter Directory option.
  1759.  
  1760.      Options,
  1761.      Keep Info with file      This will the mark corresponding .info file
  1762.                               of any single selected file.  This will have
  1763.                               no effect if the a group of files that were
  1764.                               drag selected.  MegaD has no way to tell if
  1765.                               the .info file should be left unselected or
  1766.                               not.  There is a work-around to this.  If the
  1767.                               previous Hide .info was selected the .info
  1768.                               files will be copied, moved and deleted in
  1769.                               the background of the task.  This way you
  1770.                               will not need to worry if during a drag
  1771.                               select, that .info files were included.
  1772.  
  1773.      Options,
  1774.      Keep extension 
  1775.      with files               This will select files with extension of the
  1776.                               original name.  This select and unselects
  1777.                               those files much the same as .info.  Unlike
  1778.                               Hide .info, It does not include the
  1779.                               background copy of hidden extension files.
  1780.  
  1781.      Options,
  1782.      Activate AutoBoot        If this is checked, this tells MegaD to
  1783.                               attempt to do something with a double clicked
  1784.                               files.  Should it be a text file it will 
  1785.                               load it into a text window.  If an AutoBoot
  1786.                               has been created to work on the type of data
  1787.                               found in the double clicked file it will call
  1788.                               the Program Control of the AutoBoot to
  1789.                               perform the required action needed.
  1790.  
  1791.      Options,
  1792.      Clone Copy               If checked, this will retain any file comment
  1793.                               found on the source file with the newly
  1794.                               copied file.  It will also keep the date of
  1795.                               the destination file the same as the original
  1796.                               source file copied from.
  1797.  
  1798.      Options,
  1799.      Load on disk insert      If checked this will load any disk inserted
  1800.  
  1801.  
  1802.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1803.                                        Document Prepared by  Timothy Madden
  1804.  
  1805.  
  1806.  
  1807.  
  1808.  
  1809.                                                             MegaD Menus  27
  1810.  
  1811.                               into the standard floppy disk drives, DF0:,
  1812.                               DF1:, DF2: and DF3:
  1813.  
  1814.      Options,
  1815.      Free on disk remove      If checked this will free the loaded disk
  1816.                               from memory once it is removed from the disk
  1817.                               drive.  It works with the same drives as Load
  1818.                               on disk insert.
  1819.  
  1820.      Show Menu                This menu gives you the kind of information
  1821.                               you would like to see displayed in the
  1822.                               directory windows.  It lets you display all
  1823.                               of the possible file attributes.  It also
  1824.                               let you decide how they should be sorted in
  1825.                               the windows.
  1826.  
  1827.      Show,
  1828.      All                      This lets you select all possible display
  1829.                               attributes.  It will place a check by the
  1830.                               Size, Date, Protection, and comment menu
  1831.                               items of this menu.
  1832.  
  1833.      Show,
  1834.      None                     This will let you un-select all of the
  1835.                               display attributes in this menu at one time.
  1836.  
  1837.      Show,
  1838.      Size                     If this is checked it will display the size
  1839.                               of the listed files.  If a directory is in
  1840.                               the list it will display '(dir)' if the
  1841.                               directory is empty or if you have not loaded
  1842.                               all of the items in the directory.  Should
  1843.                               the full sub-directory be buffered MegaD will
  1844.                               replace the '(dir)' with the calculated size
  1845.                               of the directory.
  1846.  
  1847.      Show,
  1848.      Date                     If this is checked the date the directory
  1849.                               item was created or last modified will be
  1850.                               displayed.
  1851.  
  1852.      Show,
  1853.      Protection               If this is checked the protection bits of the
  1854.                               file will be displayed
  1855.  
  1856.      Show,
  1857.      Comment                  If this is checked the file comment, if any,
  1858.                               will be displayed.
  1859.  
  1860.      Show,
  1861.  
  1862.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1863.                                        Document Prepared by  Timothy Madden
  1864.  
  1865.  
  1866.  
  1867.  
  1868.  
  1869.                                                             MegaD Menus  28
  1870.  
  1871.      Sort On                  This is a sub-menu for Show.  It will let you
  1872.                               decide what file attribute you want MegaD to
  1873.                               sort the information in, if any.
  1874.  
  1875.      Show,
  1876.      Reset All                By changing any of the attributes for the
  1877.                               display of the directory window only
  1878.                               'Dest'ination windows will show the change. 
  1879.                               If you wish to reset all of open directory
  1880.                               window to reflect the current display options
  1881.                               Select this menu item.
  1882.  
  1883.      Output Menu              This menu is another reason MegaD stands out
  1884.                               from other directory utilities.  MegaD has
  1885.                               incorporated a number of the common output
  1886.                               function that can be done with selected items
  1887.                               in directories.  This menu gives you the
  1888.                               option to send the selected information out
  1889.                               in a number of ways.  To files, or directly
  1890.                               to the printer.  It is also the easiest disk
  1891.                               label maker known.
  1892.  
  1893.      Output,
  1894.      Printer                  This option will send the selected items as a
  1895.                               list to the printer.  Much like the Dir
  1896.                               command found in the C: directory.  Only it
  1897.                               will send the information in the sorted order
  1898.                               selected in the Show menu.
  1899.  
  1900.      Output,
  1901.      File                     This option work the same as the above
  1902.                               Printer option but will send the information
  1903.                               to a file.A 'Dest'ination directory needs to
  1904.                               be available before calling this function.
  1905.  
  1906.      Output,
  1907.      W/Tree Lines             The above two options indents each printed
  1908.                               sub-directory by four spaces.  If this menu
  1909.                               item is checked the four spaces will be
  1910.                               replaced by |-- creating tree lines to easily
  1911.                               trace the start and end of large
  1912.                               directories.
  1913.  
  1914.      Output,
  1915.      Disk Label               This is a sub menu.  It has four other menu
  1916.                               items to work the Disk label functions. 
  1917.                               MegaD come set to work with a standard pin
  1918.                               fed disk label.  The best source for this
  1919.                               buying this label is from a good office or
  1920.                               computer supply that sell Avery labels.  The
  1921.  
  1922.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1923.                                        Document Prepared by  Timothy Madden
  1924.  
  1925.  
  1926.  
  1927.  
  1928.  
  1929.                                                             MegaD Menus  29
  1930.  
  1931.                               number of the Avery label is 4241.  MegaD can
  1932.                               be set to work with any label though the use
  1933.                               of the Width and Height setting found in the
  1934.                               MegaD Preference, Set Defaults window.
  1935.  
  1936.      Output,
  1937.      Disk Label,
  1938.      Alignment                This prints two small dots to the printer. 
  1939.                               The dots are to help align the disk label for
  1940.                               the current settings.
  1941.  
  1942.      Output,
  1943.      Disk Label,
  1944.      Print                    This will print one label for each displayed
  1945.                               volume with directory information selected to
  1946.                               be printed.
  1947.  
  1948.      Output,
  1949.      Disk Label,
  1950.      Print W/Modify           This will place the information in a window
  1951.                               that would have been printed to the label. 
  1952.                               In this window you are  given the option to
  1953.                               change or just preview the information before
  1954.                               it is printed.
  1955.  
  1956.      Output,
  1957.      Disk Label,
  1958.      Print Times              This allows you to create duplicate labels
  1959.                               with the same printed information on each
  1960.                               one.
  1961.  
  1962.      Output,
  1963.      Database Export File     This is for sending the information out to a
  1964.                               file.  The information is formatted in such a
  1965.                               way that your Database programs may read the
  1966.                               information for creating records.  The below
  1967.                               Setup Export menu item should be called at
  1968.                               lease once before using it.
  1969.  
  1970.      Output,
  1971.      Setup Export...          This opens a window to set the kind of
  1972.                               information that you wish to send to a
  1973.                               database Export file.  It lets you decide the
  1974.                               filename to save it to.  The file can be
  1975.                               appended to each time the Database Export
  1976.                               File menu item is called or the file will be
  1977.                               over-written  each time the call is made.
  1978.  
  1979.      Panic Menu               This is menu is here to help with panic
  1980.                               situations, just as the name implies.  This
  1981.  
  1982.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  1983.                                        Document Prepared by  Timothy Madden
  1984.  
  1985.  
  1986.  
  1987.  
  1988.  
  1989.                                                             MegaD Menus  30
  1990.  
  1991.                               is your only link to the MegaD print spool. 
  1992.                               And it will let you cancel unwanted that 
  1993.                               were started in error.
  1994.  
  1995.      Panic,
  1996.      Stop Process             This will stop any current process MegaD is
  1997.                               working.  It is important that in this kind
  1998.                               of a program that you know how to stop a
  1999.                               process that was started in error.  MegaD can
  2000.                               easily delete Megabytes of information in
  2001.                               seconds.  This is one of them.  Another is
  2002.                               the Suspend/Cancel gadget found in the panic
  2003.                               window.  And the last yet the quickest to
  2004.                               access is the Esc key found at the top Left
  2005.                               hand corner of your keyboard.  Any of these
  2006.                               will stop the current process.  You may have
  2007.                               to wait for a long disk activity before the
  2008.                               action will be read.  But it will tell MegaD
  2009.                               to stop!
  2010.  
  2011.      Panic,
  2012.      Cancel print             This will cancel the current print task, if
  2013.                               any, that the print spool is working on.
  2014.  
  2015.      Panic,
  2016.      Cancel all print         This will cancel all of the print task, if
  2017.                               any, that have been sent to the print spool,
  2018.                               including the current task.
  2019.  
  2020.  
  2021.  
  2022.  
  2023.  
  2024.  
  2025.  
  2026.  
  2027.  
  2028.  
  2029.  
  2030.  
  2031.  
  2032.  
  2033.  
  2034.  
  2035.  
  2036.  
  2037.  
  2038.  
  2039.  
  2040.  
  2041.  
  2042.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2043.                                        Document Prepared by  Timothy Madden
  2044.  
  2045.  
  2046.  
  2047.  
  2048.  
  2049.                                                       MegaD Preferences  31
  2050.  
  2051.                               MegaD Preferences
  2052.                               =================
  2053.  
  2054.                               The MegaD preferences changes only the
  2055.                               internal preferences of MegaD.  It has
  2056.                               nothing to do with your system preferences
  2057.                               for the Amiga.  All mentions of preferences
  2058.                               from this point on refer to the internal
  2059.                               setting of MegaD.
  2060.                                
  2061.                               If you have taken even a quick look into what
  2062.                               the Set Defaults has to offer you will find
  2063.                               where MegaD has done a lot of changing from
  2064.                               the last public release.  The entrance window
  2065.                               into set preferences still looks somewhat
  2066.                               familiar to V1.10 and that is where it ends.
  2067.                               This window now offers gadgets that will move
  2068.                               you into five other windows or areas to help
  2069.                               better define just how MegaD works and
  2070.                               responds to the your wishes or preferences.
  2071.  
  2072.                               All areas have a Cancel gadget that will
  2073.                               cancel all changes to that area.  The Cancel
  2074.                               gadget found in the first window will cancel
  2075.                               everything that was changed in the
  2076.                               preferences.
  2077.                                
  2078.                               All areas have a Use gadget.  This gadget
  2079.                               accept the changes made so far.  The Use
  2080.                               gadget found in the first window will accept
  2081.                               all changes made and replace the internal
  2082.                               preferences of MegaD and close the preference
  2083.                               window.
  2084.                                
  2085.                               Only the first window has a Save Gadget. 
  2086.                               When this gadget is used the current changes
  2087.                               are accepted and saved to the Megad2.pf file
  2088.                               that will be save to the current directory
  2089.                               that MegaD was loaded from.
  2090.                                
  2091.      MegaD Preferences        This is the first area that you enter when
  2092.                               the Set Defaults command is issued.  This
  2093.                               command is available from both the Menu and
  2094.                               the Keypad gadgets.
  2095.  
  2096.                               There are two main purposes of this window
  2097.                               beside giving access to the other areas of
  2098.                               preferences.  One is the setting of the Menu
  2099.                               Sets.  Two the Setting of the Device Gadgets.
  2100.  
  2101.  
  2102.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2103.                                        Document Prepared by  Timothy Madden
  2104.  
  2105.  
  2106.  
  2107.  
  2108.  
  2109.                                                       MegaD Preferences  32
  2110.  
  2111.      Setting Menu Sets        Menu Sets offer a way for the user to define
  2112.                               sets of five Menus each to do specific
  2113.                               functions by the use of Program Controls. 
  2114.                               Program controls are better explained later
  2115.                               on in  the documentation.  But in short
  2116.                               Program Controls allow you to tell MegaD to
  2117.                               call a specific program to do a specific 
  2118.                               task on possible selected files in the
  2119.                               directory windows.  They originally started
  2120.                               out as ZOO, ARC, and LHARC for the  default
  2121.                               Sets, but these can be change and modified to
  2122.                               any type that you desire.
  2123.                                 
  2124.                               If the first three sets are not enough for
  2125.                               your needs extra set of five can be defined
  2126.                               by the use of the Add Gadget found in this
  2127.                               window.  The only limit to the number that
  2128.                               you  can define is the restriction of your
  2129.                               current memory in your Amiga.  The Delete
  2130.                               gadget will delete a group of five menu sets
  2131.                               as long as it is not one of the first three
  2132.                               defaults sets, ZOO, ARC, and LHARC.
  2133.  
  2134.                               The four string gadgets assign to each Menu
  2135.                               Sets are the same string gadgets found in the
  2136.                               program control window that would open if you
  2137.                               were to hit the Control... gadget to the left
  2138.                               of the string gadgets.  It is best to
  2139.                               actually go to the Program Control by the use
  2140.                               of the Control.. gadget, being this offers
  2141.                               the full range of settings available to the
  2142.                               menu set.  Once again it will helpful to read
  2143.                               the section of the MegaD.Tutorial 
  2144.                               documentation about the program controls and
  2145.                               how they operate.
  2146.  
  2147.                               When typing in the Path and filename for each
  2148.                               program control that you want to use you will
  2149.                               need to enter the full path to that file or
  2150.                               the assign name for the path.
  2151.  
  2152.  
  2153.  
  2154.      Setting Device Gadget    The device gadget are where you would put
  2155.                               your most used  devices or volume names.  If
  2156.                               you name the device gadgets the hardware name
  2157.                               such as DF0: the name will be expanded to the
  2158.                               actual volume name for display.
  2159.  
  2160.  
  2161.  
  2162.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2163.                                        Document Prepared by  Timothy Madden
  2164.  
  2165.  
  2166.  
  2167.  
  2168.  
  2169.                                                       MegaD Preferences  33
  2170.  
  2171.                               There are times that you would wish to load
  2172.                               the directory as DF0: and DF1: so that files
  2173.                               can be moved on identical named disk.  This
  2174.                               is accommodated from the bottom of the device
  2175.                               list found in the main control window. 
  2176.                               Should you load a directory by double
  2177.                               clicking the DF0: entry from this list the
  2178.                               directory window title will stay DF0:.
  2179.  
  2180.                               Your best bet in dealing with identical names
  2181.                               is to rename one of the volumes to a
  2182.                               different name and load the volumes  by the
  2183.                               volume names and not the drive names.  But if
  2184.                               you must use identical volume names, BE
  2185.                               CAREFUL! 
  2186.                                
  2187.                               If the preference file can not be found at
  2188.                               startup MegaD will set the device gadgets to
  2189.                               the first nine volumes/assign/drives in the
  2190.                               device list.  You may modify them to any
  2191.                               valid volume or device names that  you wish.
  2192.                                
  2193.                               You may also set certain volumes to load at
  2194.                               start by adding  special load flags at the
  2195.                               end of the volume name.  The flags that can
  2196.                               be added are L and D.  The flags can be upper
  2197.                               or   lower case but must be preceded with one
  2198.                               dash '-'. Examples:
  2199.                               Ram Disk:-L
  2200.                                    Will load the Ram Disk: Directory at
  2201.                                    start.
  2202.                               Ram Disk:-LD   
  2203.                                    Will load the Ram Disk: Directory at
  2204.                                    start and Select the Dest gadget as a
  2205.                                    user defined destination.
  2206.                               Ram Disk:-LLD  
  2207.                                    Will load the Ram Disk: directory and
  2208.                                    start and Select the Dest gadget as a
  2209.                                    user defined destination and the Lock
  2210.                                    gadget for that directory.
  2211.                                
  2212.      MegaD Preferences,
  2213.      Set Colors               This area of Preferences is dedicated to the
  2214.                               colors available for the display of
  2215.                               information within MegaD windows.
  2216.                                
  2217.                               In the very center of this window is a single
  2218.                               check type gadget which by default is set. 
  2219.                               The title of this gadgets is "1.3 / 2.0
  2220.                               Colors Switch"  One of the many changes that
  2221.  
  2222.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2223.                                        Document Prepared by  Timothy Madden
  2224.  
  2225.  
  2226.  
  2227.  
  2228.  
  2229.                                                       MegaD Preferences  34
  2230.  
  2231.                               happened with the new 2.0 OS for the Amiga
  2232.                               was the change of the default colors.  With
  2233.                               this gadget checked the system will be check
  2234.                               for 1.3 or 2.0 and the colors will be set
  2235.                               accordingly.
  2236.  
  2237.                               All colors can be set to your liking.  MegaD
  2238.                               will check for conflict of colors, if needed,
  2239.                               and will warn you if you try to use the
  2240.                               conflicting colors.  An example of this
  2241.                               would be the Directory and the File colors
  2242.                               are the same.  Since this would render the
  2243.                               names of directories and files the same
  2244.                               color,  these colors conflict.
  2245.  
  2246.                               MegaD will display the resulting selected
  2247.                               colors in small boxes to the right of the
  2248.                               gadgets to show the effect of the selections.
  2249.                                
  2250.      MegaD Preferences,
  2251.      Set Display              Screen type is a cycle gadgets that can be
  2252.                               set to five setting for type of screens to
  2253.                               create.  The screens created are where all of
  2254.                               MegaD windows will be placed.
  2255.                                 
  2256.                               Workbench
  2257.                                    Places MegaD on the Workbench screen.
  2258.                                 
  2259.                               Hires   
  2260.                                    Creates a hires screen (640 X 200
  2261.                                    lines)
  2262.                                 
  2263.                               Hires-Interlace  
  2264.                                    Creates a hires-interlace screen (640 X
  2265.                                    400 lines)
  2266.                                 
  2267.                               SuperHires  
  2268.                                    Creates a SuperHires screen (1280 X 200
  2269.                                    lines)
  2270.                                 
  2271.                               SuperHires-Lace
  2272.                                    Creates a SuperHires-Interlace screen
  2273.                                    (1280 X 400 lines)
  2274.  
  2275.                               The last two modes are only available if your
  2276.                               system has the new Enhanced Chip Set (ECS).
  2277.  
  2278.                               Below the first screen type gadget is the
  2279.                               screen color dept gadget this cycles though 4
  2280.                               color, 8 color and 16 color modes.  This
  2281.  
  2282.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2283.                                        Document Prepared by  Timothy Madden
  2284.  
  2285.  
  2286.  
  2287.  
  2288.  
  2289.                                                       MegaD Preferences  35
  2290.  
  2291.                               will only effect the screen MegaD creates. it
  2292.                               will not effect the Workbench screen.
  2293.                                 
  2294.      Date Format              Cycles though dd/mmm/yy, mm/dd/yy, dd/mm/yy
  2295.                               or yy/mmm/dd.  This defines how MegaD will
  2296.                               display the dates for your directory items.
  2297.  
  2298.      Use Today / Yesterday    This is a check gadgets that will tell MegaD
  2299.                               to display  files created today to be marked
  2300.                               with the Today and files created yesterday to
  2301.                               be marked with the Yesterday instead of using
  2302.                               the date for that directory item.
  2303.                                 
  2304.      12 Hour Clock            Changes the 24 hour date to a 12 hour time
  2305.                               with am, or pm behind the date.
  2306.                                 
  2307.      1000 Separator           Set the separator to a comma, period, space
  2308.                               or no separator for thousands.
  2309.  
  2310.      Decimal is comma         This is a do nothing gadget at the moment but
  2311.                               should MegaD ever need to display floating
  2312.                               point information, Its ready!  
  2313.                                 
  2314.  
  2315.  
  2316.  
  2317.  
  2318.  
  2319.  
  2320.  
  2321.  
  2322.  
  2323.  
  2324.  
  2325.  
  2326.  
  2327.  
  2328.  
  2329.  
  2330.  
  2331.  
  2332.  
  2333.  
  2334.  
  2335.  
  2336.  
  2337.  
  2338.  
  2339.  
  2340.  
  2341.  
  2342.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2343.                                        Document Prepared by  Timothy Madden
  2344.  
  2345.  
  2346.  
  2347.  
  2348.  
  2349.                                                       MegaD Preferences  36
  2350.  
  2351.                               MegaD Preferences, Set Defaults (Area 1)
  2352.                               ========================================
  2353.  
  2354.                               Many settings are performed here, it takes
  2355.                               two areas to display all of the possible
  2356.                               settings and the different areas are access
  2357.                               by the use of the More/OK gadget.  The first
  2358.                               area here is controlled by the use of check
  2359.                               gadgets.  If the gadget is checked, the
  2360.                               following information following the title
  2361.                               will be the results.
  2362.  
  2363.      Auto resize windows      This only works when window overlap mode set
  2364.                               in the menu "Windows/Overlap Locations".  It
  2365.                               will attempt to resize the directory windows
  2366.                               larger or smaller to display as much as 
  2367.                               needed.
  2368.  
  2369.      Auto update windows      Each time the directory window is opened it
  2370.                               will test to see if it needs to update MegaD
  2371.                               buffers.  It tests to see if the parent
  2372.                               directory entry date has changed.  If the
  2373.                               date conflicts with the date the directory
  2374.                               was loaded, it will re-read that directory. 
  2375.                               If that information has been changed by some
  2376.                               other program MegaD will not know about it. 
  2377.                               This forces the reload of the directory so
  2378.                               that it will be current.  This becomes
  2379.                               bothersome when multiple floppy disk are
  2380.                               buffered, yet not in the drives, you will
  2381.                               have to re-insert the floppy disk as you
  2382.                               reopen the windows to the buffered
  2383.                               directories.
  2384.                                
  2385.      Confirm quit             Gives you a chance not to quit MegaD if an
  2386.                               accidental quit was issued.
  2387.                                 
  2388.      Iconify at start         MegaD will iconify it's self at startup. 
  2389.                               This is very useful if you place MegaD in
  2390.                               your startup sequence, or you WBStartup
  2391.                               drawer to be pre-loaded and ready for use
  2392.                               when you want it.
  2393.  
  2394.      Keep active window to front
  2395.                               This will force the active window on in MegaD
  2396.                               to the front of the screen.  It will not work
  2397.                               on the Main control window.  F10, F9 and the
  2398.                               F8 key will move that window to the front and
  2399.                               back if needed.
  2400.                                 
  2401.  
  2402.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2403.                                        Document Prepared by  Timothy Madden
  2404.  
  2405.  
  2406.  
  2407.  
  2408.  
  2409.                               MegaD Preferences, Set Defaults (Area 1)  37
  2410.  
  2411.      Last active window is destination
  2412.                               The last active directory window will become
  2413.                               the destination window if no user defined
  2414.                               destination windows are on the screen.  The
  2415.                               default is the active window is destination. 
  2416.                               At any time a user defined 'Dest'ination
  2417.                               gadget is found the auto select of the
  2418.                               destination gadget by MegaD is disabled.
  2419.  
  2420.      Place tool icon & menu on Workbench
  2421.                               This only works if you are using the new 2.0
  2422.                               operating system.  MegaD uses Application
  2423.                               Icons and Application Windows on the
  2424.                               Workbench.  This way you can drop any icon on
  2425.                               to MegaD and it will attempt to do something
  2426.                               with it.  At the least, the MegaD screen will
  2427.                               be opened if it is closed or the screen will
  2428.                               be moved to the front of all of the screens.
  2429.  
  2430.                               If a disk icon or a directory icon is dropped
  2431.                               onto the MegaD Icon or main control window
  2432.                               MegaD will load that directory and place it
  2433.                               into a directory window.  Should a data file
  2434.                               be dropped, and an AutoBoot is available that
  2435.                               knows how to work it, MegaD will use the
  2436.                               program control of the AutoBoot to work the
  2437.                               file.  You may drop up to 10 Workbench
  2438.                               objects onto the Icon and MegaD will work
  2439.                               each one in sequence.
  2440.  
  2441.      Messages off             This will cancel all simple information
  2442.                               messages that only use the Continue gadget to
  2443.                               get an answer to the request.  The
  2444.                               information usually tells you why a function
  2445.                               or task did not failed.
  2446.  
  2447.      Panic button window      While task are working such as Delete, Copy,
  2448.                               or Move a window will open.  It will have an
  2449.                               area that information  will be printed and
  2450.                               scroll up making room for more information. 
  2451.                               There are two gadgets at the bottom, Suspend,
  2452.                               which gives you a chance to stop the action,
  2453.                               to see if you really want to cancel the
  2454.                               process, and Cancel which ends the task. 
  2455.                               Both gadget are hard to hit in a time of
  2456.                               panic, so the Esc key at the upper left
  2457.                               corner of your keyboard is dedicated to
  2458.                               stopping the task also.
  2459.  
  2460.  
  2461.  
  2462.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2463.                                        Document Prepared by  Timothy Madden
  2464.  
  2465.  
  2466.  
  2467.  
  2468.  
  2469.                               MegaD Preferences, Set Defaults (Area 1)  38
  2470.  
  2471.                                 
  2472.      Save defaults at closing
  2473.                               MegaD will save the current preferences
  2474.                               before quitting.  This is very useful at
  2475.                               first while getting MegaD set up.  This way
  2476.                               all of the preferences will be updated after
  2477.                               each run.
  2478.  
  2479.      Save window positions    MegaD will remember the locations of
  2480.                               requester and special windows and reopen them
  2481.                               in the same locations.  The default is to
  2482.                               open the windows with the gadget under the
  2483.                               mouse pointer if possible or to center the
  2484.                               window under the mouse.
  2485.                                
  2486.      Simple refresh windows   Saves memory by opening windows that must be
  2487.                               refresh if uncovered by another window.
  2488.                                  
  2489.      Warn before copy         Gives you a chance to cancel a call to copy.
  2490.                                
  2491.      Warn before delete       Gives you a chance to cancel a call to
  2492.                               delete.  (Your a gutsy person if you un-check
  2493.                               this item.)
  2494.  
  2495.      Warn before move         Gives you a chance to cancel a call to move.
  2496.  
  2497.      Warn if deleting protected file
  2498.                               If the file is protected MegaD will warn you
  2499.                               so and give you the option to cancel the
  2500.                               delete or delete anyway.
  2501.  
  2502.      Warn if replacing larger file
  2503.                               During copy/move you will be warned if you
  2504.                               try to copy over a larger file.
  2505.  
  2506.      Warn if replacing newer file
  2507.                               During copy/move you will be warned if you
  2508.                               try to copy over a newer file.
  2509.  
  2510.      Warn if replacing file   During copy/move you will be warned if you
  2511.                               try to copy over any file.
  2512.  
  2513.      F10 Closes control window
  2514.                               The F10 key normally moves the MegaD control
  2515.                               window to the front and rear position on the
  2516.                               screen.  This only works if MegaD is
  2517.                               operating on its own screen.  Instead of the
  2518.                               window moving to the rear position, the
  2519.                               window is actual closed.  You will find that
  2520.                               there are keyboard equivalents for most
  2521.  
  2522.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2523.                                        Document Prepared by  Timothy Madden
  2524.  
  2525.  
  2526.  
  2527.  
  2528.  
  2529.                               MegaD Preferences, Set Defaults (Area 1)  39
  2530.  
  2531.                               functions that the control window provides. 
  2532.                               Thus getting the rid of the control window
  2533.                               will provide a little less crowded screen.
  2534.  
  2535.  
  2536.  
  2537.  
  2538.  
  2539.  
  2540.  
  2541.  
  2542.  
  2543.  
  2544.  
  2545.  
  2546.  
  2547.  
  2548.  
  2549.  
  2550.  
  2551.  
  2552.  
  2553.  
  2554.  
  2555.  
  2556.  
  2557.  
  2558.  
  2559.  
  2560.  
  2561.  
  2562.  
  2563.  
  2564.  
  2565.  
  2566.  
  2567.  
  2568.  
  2569.  
  2570.  
  2571.  
  2572.  
  2573.  
  2574.  
  2575.  
  2576.  
  2577.  
  2578.  
  2579.  
  2580.  
  2581.  
  2582.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2583.                                        Document Prepared by  Timothy Madden
  2584.  
  2585.  
  2586.  
  2587.  
  2588.  
  2589.                                MegaD Preferences, Set Defaults (Area 1)  40
  2590.  
  2591.                               MegaD Preferences, Set Defaults (Area 2)
  2592.                               ========================================
  2593.  
  2594.                               The second area in the Set Defaults has a few
  2595.                               string gadgets and some cycle gadgets to set
  2596.                               the order that information is displayed in
  2597.                               the directory window.
  2598.                                  
  2599.      Copy/Format              MegaD will call any stand alone copy/format
  2600.                               program.  This program must be compatible
  2601.                               with the Workbench.  The best clue for this
  2602.                               compatibility is the present of an Icon file. 
  2603.                               This hold the image for the icon you double
  2604.                               click to start a program from the Workbench. 
  2605.                               This sting must contain the full path and
  2606.                               file name to reach this program.  A Program
  2607.                               Control is available to set the exact action
  2608.                               that MegaD should take when executing this
  2609.                               program.
  2610.  
  2611.      View Text                MegaD has one of the most versatile text
  2612.                               viewers around.  But if you feel that another
  2613.                               program should be called, if a text file is
  2614.                               double clicked in a directory window, you may
  2615.                               enter the path and filename here.  A Program
  2616.                               Control is available to set the exact action
  2617.                               that MegaD should take when executing this
  2618.                               program.
  2619.  
  2620.      Label height             How many printed lines are the labels that
  2621.                               you wish to use with MegaD Label.
  2622.                                 
  2623.      Label width              How wide in characters are the labels that
  2624.                               you wish to use with MegaD label.
  2625.  
  2626.      Source icon for directories
  2627.                               If you supply a name here for the an icon
  2628.                               MegaD will use a copy of it to give newly
  2629.                               created directories an icon.  It defaults to
  2630.                               SYS:system which usually exist.  There is
  2631.                               also a check gadget to the right of this
  2632.                               string gadget that may be selected under the
  2633.                               2.0 OS system.  If you check this gadget the
  2634.                               system default icon will be used instead of
  2635.                               loading the Icon from the filename.  If you
  2636.                               do not want Icons created with directory
  2637.                               delete all of the characters from this string
  2638.                               and leave the 2.0 Default gadget unchecked.
  2639.  
  2640.  
  2641.  
  2642.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2643.                                        Document Prepared by  Timothy Madden
  2644.  
  2645.  
  2646.  
  2647.  
  2648.  
  2649.                                MegaD Preferences, Set Defaults (Area 1)  41
  2650.  
  2651.      Dictionary filename      This must be the name without the path
  2652.                               attribute of the dictionary file that you
  2653.                               wish MegaD to use.  The dictionary file must
  2654.                               be in the same directory that the program
  2655.                               MegaD resides in.
  2656.  
  2657.      Create Master Dictionary
  2658.                               By hitting this gadget MegaD will create the
  2659.                               master  dictionary.  The main purpose of this
  2660.                               file is for easy translation of MegaD to
  2661.                               other languages.  But this can be used to
  2662.                               change any display line that you wish. 
  2663.                               Please read the Dictionary section for more
  2664.                               information.
  2665.                                
  2666.      Directory listing order  This is a cycle gadget that will cycle
  2667.                               though 
  2668.                                    List directories first 
  2669.                                    List files first   
  2670.                                    List items mixed   
  2671.                                
  2672.      Order of file information
  2673.                               There are five small cycle gadgets for this
  2674.                               setting.  The higher the number the later the
  2675.                               information will appear in the window.  By
  2676.                               setting the cycle gadgets to other values the
  2677.                               information can be displayed in all possible
  2678.                               orders.
  2679.  
  2680.  
  2681.  
  2682.  
  2683.  
  2684.  
  2685.  
  2686.  
  2687.  
  2688.  
  2689.  
  2690.  
  2691.  
  2692.  
  2693.  
  2694.  
  2695.  
  2696.  
  2697.  
  2698.  
  2699.  
  2700.  
  2701.  
  2702.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2703.                                        Document Prepared by  Timothy Madden
  2704.  
  2705.  
  2706.  
  2707.  
  2708.  
  2709.                                          MegaD Preferences, Set Keypads  42
  2710.  
  2711.                               MegaD Preferences, Set Keypads
  2712.                               ==============================
  2713.  
  2714.                               This is a very powerful area of MegaD
  2715.                               Preferences.  You can actually modify Menu
  2716.                               Sets, AutoBoots, User Gadgets though here. 
  2717.                               You can rearrange, remove, duplicate
  2718.                               functions on the keypad.  Change the color of
  2719.                               the keypad gadgets.
  2720.                                  
  2721.                               There are two major areas of gadgets.  The
  2722.                               upper area can be considered as source
  2723.                               gadgets that information can be copied from. 
  2724.                               The lower area of gadget that are arranged in
  2725.                               the order of a keypad at the side of most
  2726.                               Amigas.  Shift keys to the Left of the keypad
  2727.                               represent the shifted mode of the keypad,
  2728.                               Ctrl, Shift, Alt.  This can be considered the
  2729.                               destination gadgets.  Any one single item can
  2730.                               be selected in one of the two areas.  As soon
  2731.                               as an one item is selected in both areas the
  2732.                               information is copied to the keypad gadgets. 
  2733.                               A blank source will create a blank
  2734.                               do-nothing keypad gadget.
  2735.                                  
  2736.                               You will find two cycle gadgets, One is for
  2737.                               pages of source information, the other is to
  2738.                               select the type of source information to
  2739.                               transfer or to work on.  The types to work on
  2740.                               are Built-in (you can not modify a built-in
  2741.                               command), Menu Sets, AutoBoots and User
  2742.                               Gadgets.
  2743.  
  2744.                               Below this set of cycle gadgets are gadgets
  2745.                               labeled Add, Delete, Modify.  By selecting a
  2746.                               Menu Set, AutoBoot, or User Gadget and then
  2747.                               selecting the Modify gadget you can edit how
  2748.                               a program control will function.  By
  2749.                               selecting a keypad gadget and then modify,
  2750.                               you can change the title and color of the
  2751.                               keypad gadget.
  2752.  
  2753.                               Should you set MegaD to Two Window mode the
  2754.                               keypad gadget will be arrange in the two
  2755.                               window style so that you will be able to see
  2756.                               just how they will look in that mode.  The
  2757.                               disadvantage of this is the keyboard
  2758.                               equivalent of the gadgets are not represented
  2759.                               very well.
  2760.  
  2761.  
  2762.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2763.                                        Document Prepared by  Timothy Madden
  2764.  
  2765.  
  2766.  
  2767.  
  2768.  
  2769.                                                        MegaD Dictionary  43
  2770.  
  2771.                               MegaD Dictionary
  2772.                               ================
  2773.  
  2774.                               Megad has the ability to read a specialty
  2775.                               formatted text file, and to use the
  2776.                               information in that text file to change the
  2777.                               displayed text used within MegaD windows and
  2778.                               requestors.  The main purpose of this file is
  2779.                               to allow the complete translation of MegaD to
  2780.                               other languages.  The Dictionary facility of
  2781.                               MegaD will accept a partial dictionary file,
  2782.                               or even one single line to be translated.
  2783.  
  2784.                               The format of the dictionary file is simple,
  2785.                               the text is followed by a number (or
  2786.                               subscript if you are familiar with
  2787.                               programing.)  A dictionary line in the
  2788.                               dictionary takes this format:
  2789.  
  2790.                               Close Windows; 78
  2791.  
  2792.                               Notice that the end of the text is signified
  2793.                               by the semi-colon.  The number that follows
  2794.                               the semi-colon is the position MegaD will
  2795.                               place the information in to the program.  78
  2796.                               is the position that MegaD uses to create the
  2797.                               text for the menu item "Windows, Close
  2798.                               Windows".  By changing this line to read:
  2799.  
  2800.                               Shut Windows; 78
  2801.  
  2802.                               MegaD will create the menu to read "Windows,
  2803.                               Shut Windows".
  2804.  
  2805.                               The lines in the dictionary file are not
  2806.                               required to be sorted in the same order as
  2807.                               the position number at the end of the line. 
  2808.                               You may place the dictionary lines in your
  2809.                               dictionary file in any order you wish.  you
  2810.                               can even duplicate them if you wish, you may
  2811.                               want to do this to keep track of what the
  2812.                               original line read as.  You could save the
  2813.                               above change in your dictionary file like
  2814.                               this:
  2815.  
  2816.                               Close Windows; 78
  2817.                               Shut Windows; 78
  2818.  
  2819.                               Due to the fact that "Shut Windows" follows
  2820.                               "Close Windows", and "Shut Windows" is the
  2821.  
  2822.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2823.                                        Document Prepared by  Timothy Madden
  2824.  
  2825.  
  2826.  
  2827.  
  2828.  
  2829.                                                        MegaD Dictionary  44
  2830.  
  2831.                               last occurrence of dictionary line 78, "Shut
  2832.                               Windows" will be used to create the menu
  2833.                               item.
  2834.  
  2835.                               MegaDs' native language is English.  The
  2836.                               English dictionary is built into MegaD. 
  2837.                               MegaD will write the dictionary out to it's
  2838.                               Home directory as "MDMaster.dic".  Currently
  2839.                               MegaD has 679 dictionary lines.  You can
  2840.                               write this dictionary file by first selecting
  2841.                               the "Project, Defaults" menu item.  This will
  2842.                               open a window that will have a "More"
  2843.                               gadgets, select this gadget to move to the
  2844.                               second Defaults window.  At the bottom of the
  2845.                               window you will find a gadget titled, "Create
  2846.                               master dictionary", Select this gadget once. 
  2847.                               You will be greeted by a request window that
  2848.                               reads:
  2849.                                             Master Dictionary
  2850.                                will take about 16,000 bytes of disk space
  2851.                                                 Continue 
  2852.  
  2853.                               Select "Yes" and the dictionary file,
  2854.                               "MDMaster.dic", will be created in MegaD's
  2855.                               Home directory (the directory that the
  2856.                               program MegaD is stored in.)
  2857.  
  2858.                               The string gadget just above "Create master
  2859.                               dictionary", titled "Dictionary filename", is
  2860.                               to define which dictionary file to used at
  2861.                               start up.  The information in this string
  2862.                               gadget defaults to "MegaD.dic".  This can be
  2863.                               changed to any filename you wish, but it must
  2864.                               be the filename only.  It cannot have a Path
  2865.                               appended to the front of it.  Your dictionary
  2866.                               files must reside in the same directory as
  2867.                               the program MegaD is in and run from.  To use
  2868.                               the dictionary file you must first save the
  2869.                               MegaD preferences file by using the "Project,
  2870.                               Save Preferences" menu item.  Quit MegaD,
  2871.                               and then restarting it.  MegaD will use the
  2872.                               file you defined from the previous run, for
  2873.                               the dictionary.  Due to the complex nature of
  2874.                               how the strings are stored within MegaD, the
  2875.                               dictionary file can only be read and used
  2876.                               once for each run.
  2877.  
  2878.                               If you took the above steps to create the
  2879.                               "MDMaster.dic" file you will be able to see
  2880.                               how the dictionary lines are set up.  This
  2881.  
  2882.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2883.                                        Document Prepared by  Timothy Madden
  2884.  
  2885.  
  2886.  
  2887.  
  2888.  
  2889.                                                        MegaD Dictionary  45
  2890.  
  2891.                               will offer a good example of how you should
  2892.                               do your file.  When creating your dictionary
  2893.                               file remember these simple rules.
  2894.  
  2895.                               1.   Text first, followed by a semi-collins,
  2896.                                    followed by the position number.
  2897.  
  2898.                               2.   You need to include only the dictionary
  2899.                                    lines that you wish to translate.
  2900.  
  2901.                               3.   You may have the dictionary lines in any
  2902.                                    order you wish.  (The dictionary file is
  2903.                                    not dependent on the order that the
  2904.                                    information is found, only by the number
  2905.                                    that is at the end of the dictionary
  2906.                                    line.)
  2907.  
  2908.                               4.   Duplicates dictionary lines are allowed, 
  2909.                                    Only the last occurrence will be used.
  2910.  
  2911.                               You will find an example of a simple
  2912.                               dictionary file with MegaD.  It is titled
  2913.                               "Example.dic".  It will show the free style
  2914.                               nature of the format of a dictionary file.
  2915.  
  2916.                               An offer from the Author.
  2917.                               I do not have the talent to translate MegaD. 
  2918.                               I am willing to give a "Lifetime
  2919.                               registration" to users who wishes to create a
  2920.                               dictionary file to translate MegaD to other
  2921.                               languages.  The requirements for this offer
  2922.                               are:
  2923.  
  2924.                               1.   You must first contact me by using the
  2925.                                    address found in the About window found
  2926.                                    by use of the Project menu.
  2927.  
  2928.                               2.   In the letter you must inform me of what
  2929.                                    language you plan on translating MegaD
  2930.                                    to.  And you must include your address.
  2931.  
  2932.                               3.   If you are the first to make the offer
  2933.                                    to translate MegaD to that language and
  2934.                                    no others are trying to create the
  2935.                                    translated version for that language, I
  2936.                                    will mail to you a Registered version of
  2937.                                    MegaD.
  2938.  
  2939.                               4.   Once you have finished the dictionary
  2940.                                    file and mailed it back to me (on disk.)
  2941.  
  2942.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  2943.                                        Document Prepared by  Timothy Madden
  2944.  
  2945.  
  2946.  
  2947.  
  2948.  
  2949.                                                        MegaD Dictionary  46
  2950.  
  2951.                                    and I can verify the validity of the
  2952.                                    translation.  I will mail to you a
  2953.                                    contract that will sign the rights of
  2954.                                    the work (dictionary file) to me (John
  2955.                                    L. Jones), in leu of a "Lifetime
  2956.                                    registration" for you, from me (John L.
  2957.                                    Jones.)
  2958.  
  2959.  
  2960.                               Being MegaD is a Tryware offering, it will
  2961.                               not read, nor write the MegaD preference
  2962.                               file.  MegaD defaults to "MegaD.dic" as the
  2963.                               current dictionary file.  So by naming your
  2964.                               dictionary file to "MegaD.dic", and storing
  2965.                               it in the Home directory of MegaD, you will
  2966.                               be able to test the dictionary file out while
  2967.                               it is being created.  This also means that
  2968.                               dictionary files can be released to public
  2969.                               domain and made available to other users. 
  2970.                               They must be kept separate from the official
  2971.                               archive that I, the author of MegaD, create. 
  2972.                               Releasing it this way will not get you a
  2973.                               "Lifetime Registration" though.
  2974.  
  2975.  
  2976.  
  2977.  
  2978.  
  2979.  
  2980.  
  2981.  
  2982.  
  2983.  
  2984.  
  2985.  
  2986.  
  2987.  
  2988.  
  2989.  
  2990.  
  2991.  
  2992.  
  2993.  
  2994.  
  2995.  
  2996.  
  2997.  
  2998.  
  2999.  
  3000.  
  3001.  
  3002.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  3003.                                        Document Prepared by  Timothy Madden
  3004.  
  3005.  
  3006.  
  3007.  
  3008.  
  3009.                                                                 Summary  47
  3010.  
  3011.                               Summary
  3012.                               =======
  3013.  
  3014.                               MegaD is one of the highest quality utilities
  3015.                               for the Amiga computer.  Its ability to
  3016.                               display more than two directory lists at the
  3017.                               same time puts it into a class by itself. 
  3018.                               With this feature, files can be copied to
  3019.                               multiple destinations with ease.  Multiple
  3020.                               directories can be copied to a single one
  3021.                               with equal deftness.
  3022.  
  3023.                               The ease at which MegaD can 'learn' to
  3024.                               manipulate external programs is amazing. 
  3025.                               Some simple mouse clicks and the program
  3026.                               understands how to deal with data files from
  3027.                               external programs.  This ability is unique
  3028.                               among any program like it.
  3029.  
  3030.  
  3031.  
  3032.  
  3033.  
  3034.  
  3035.  
  3036.  
  3037.  
  3038.  
  3039.  
  3040.  
  3041.  
  3042.  
  3043.  
  3044.  
  3045.  
  3046.  
  3047.  
  3048.  
  3049.  
  3050.  
  3051.  
  3052.  
  3053.  
  3054.  
  3055.  
  3056.  
  3057.  
  3058.  
  3059.  
  3060.  
  3061.  
  3062.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  3063.                                        Document Prepared by  Timothy Madden
  3064.  
  3065.  
  3066.  
  3067.  
  3068.  
  3069.                                                                    Index  i
  3070.  
  3071.  
  3072.                               1000 Separator . . . . . . . . . . . . . . 35
  3073.                               12 Hour Clock  . . . . . . . . . . . . . . 35
  3074.                               ABoot Add   (Add to Autoboot)  . . . . . .  9
  3075.                               ABoot Edit (Edit Autoboot) . . . . . . . .  9
  3076.                               Auto resize windows  . . . . . . . . . . . 36
  3077.                               Auto update windows  . . . . . . . . . . . 36
  3078.                               Clear  All . . . . . . . . . . . . . . . .  9
  3079.                               Clr ABoot  . . . . . . . . . . . . . . . .  9
  3080.                               Clr Dir  . . . . . . . . . . . . . . . . .  9
  3081.                               Clr Files  . . . . . . . . . . . . . . . .  9
  3082.                               Clr Pattern  . . . . . . . . . . . . . . . 10
  3083.                               Clr Src  . . . . . . . . . . . . . . . . .  9
  3084.                               ClrSrcDir  . . . . . . . . . . . . . . . .  9
  3085.                               ClrSrcFile . . . . . . . . . . . . . . . .  9
  3086.                               Confirm quit . . . . . . . . . . . . . . . 36
  3087.                               Copy . . . . . . . . . . . . . . . . . . . 10
  3088.                               Copy As  . . . . . . . . . . . . . . . . . 10
  3089.                               Copy/Format  . . . . . . . . . . . . . 10, 40
  3090.                               Create Dir . . . . . . . . . . . . . . . . 10
  3091.                               Create Master Dictionary . . . . . . . . . 41
  3092.                               Date Format  . . . . . . . . . . . . . . . 35
  3093.                               Decimal is comma . . . . . . . . . . . . . 35
  3094.                               Delete . . . . . . . . . . . . . . . . . . 10
  3095.                               Dictionary filename  . . . . . . . . . . . 41
  3096.                               Directory listing order  . . . . . . . . . 41
  3097.                               Directory Windows  . . . . . . . . . . . .  7
  3098.                               DISCLAIMER . . . . . . . . . . . . . . . .  3
  3099.                               Duplicate  . . . . . . . . . . . . . . . . 11
  3100.                               Export File  . . . . . . . . . . . . . . . 11
  3101.                               F10 Closes control window  . . . . . . . . 38
  3102.                               File Comment . . . . . . . . . . . . . . . 11
  3103.                               Filters +  . . . . . . . . . . . . . . . . 11
  3104.                               Filters -  . . . . . . . . . . . . . . . . 11
  3105.                               Find . . . . . . . . . . . . . . . . . . . 11
  3106.                               Go Deep  . . . . . . . . . . . . . . . . . 12
  3107.                               Iconify  . . . . . . . . . . . . . . . . . 12
  3108.                               Iconify at start . . . . . . . . . . . . . 36
  3109.                               INTRODUCTION . . . . . . . . . . . . . . .  1
  3110.                               Keep active window to front  . . . . . . . 36
  3111.                               Lab. Modify  . . . . . . . . . . . . . . . 13
  3112.                               Label  . . . . . . . . . . . . . . . . . . 12
  3113.                               Label Align  . . . . . . . . . . . . . . . 13
  3114.                               Label height . . . . . . . . . . . . . . . 40
  3115.                               Label Times  . . . . . . . . . . . . . . . 13
  3116.                               Label width  . . . . . . . . . . . . . . . 40
  3117.                               Last active window is destination  . . . . 37
  3118.                               Main Window Default Gadgets  . . . . . . .  9
  3119.                               MegaD Dictionary . . . . . . . . . . . . . 43
  3120.                               MegaD Menus  . . . . . . . . . . . . . . . 19
  3121.  
  3122.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  3123.                                        Document Prepared by  Timothy Madden
  3124.  
  3125.  
  3126.  
  3127.  
  3128.  
  3129.                                                                   Index  ii
  3130.  
  3131.                               MegaD Preferences  . . . . . . . . . . . . 31
  3132.                               MegaD Preferences, Set Colors  . . . . . . 33
  3133.                               MegaD Preferences, Set Defaults (Area 1) . 36
  3134.                               MegaD Preferences, Set Defaults (Area 2) . 40
  3135.                               MegaD Preferences, Set Display . . . . . . 34
  3136.                               MegaD Preferences, Set Keypads . . . . . . 42
  3137.                               Messages off . . . . . . . . . . . . . . . 37
  3138.                               Move . . . . . . . . . . . . . . . . . . . 13
  3139.                               Move As  . . . . . . . . . . . . . . . . . 13
  3140.                               NOTE:  . . . . . . . . . . . . . . . . . . 15
  3141.                               Options Menu . . . . . . . . . . . . . . . 24
  3142.                               Options, Activate AutoBoot . . . . . . . . 26
  3143.                               Options, Clear All Hide  . . . . . . . . . 25
  3144.                               Options, Clone Copy  . . . . . . . . . . . 26
  3145.                               Options, Filter Directory  . . . . . . . . 25
  3146.                               Options, Free on disk remove . . . . . . . 27
  3147.                               Options, Hide .INFO  . . . . . . . . . . . 25
  3148.                               Options, Hide Amiga Directories  . . . . . 25
  3149.                               Options, Hide C Directory  . . . . . . . . 25
  3150.                               Options, Keep extension  with files  . . . 26
  3151.                               Options, Keep Info with file . . . . . . . 26
  3152.                               Options, Load on disk insert . . . . . . . 26
  3153.                               Options, Remove all filters  . . . . . . . 26
  3154.                               Options, Select All Hide . . . . . . . . . 25
  3155.                               Order of file information  . . . . . . . . 41
  3156.                               Output File  . . . . . . . . . . . . . . . 13
  3157.                               Output Menu  . . . . . . . . . . . . . . . 28
  3158.                               Output Ptr . . . . . . . . . . . . . . . . 13
  3159.                               Output, Database Export File . . . . . . . 29
  3160.                               Output, Disk Label . . . . . . . . . . . . 28
  3161.                               Output, Disk Label, Alignment  . . . . . . 29
  3162.                               Output, Disk Label, Print  . . . . . . . . 29
  3163.                               Output, Disk Label, Print Times  . . . . . 29
  3164.                               Output, Disk Label, Print W/Modify . . . . 29
  3165.                               Output, File . . . . . . . . . . . . . . . 28
  3166.                               Output, Printer  . . . . . . . . . . . . . 28
  3167.                               Output, Setup Export...  . . . . . . . . . 29
  3168.                               Output, W/Tree Lines . . . . . . . . . . . 28
  3169.                               Panic button window  . . . . . . . . . . . 37
  3170.                               Panic Menu . . . . . . . . . . . . . . . . 29
  3171.                               Panic, Cancel all print  . . . . . . . . . 30
  3172.                               Panic, Cancel print  . . . . . . . . . . . 30
  3173.                               Panic, Stop Process  . . . . . . . . . . . 30
  3174.                               Place tool icon & menu on Workbench  . . . 37
  3175.                               Project Menu . . . . . . . . . . . . . . . 19
  3176.                               Project, About . . . . . . . . . . . . . . 21
  3177.                               Project, Add to Autoboot . . . . . . . . . 19
  3178.                               Project, Color . . . . . . . . . . . . . . 20
  3179.                               Project, Defaults  . . . . . . . . . . . . 20
  3180.                               Project, Display . . . . . . . . . . . . . 20
  3181.  
  3182.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  3183.                                        Document Prepared by  Timothy Madden
  3184.  
  3185.  
  3186.  
  3187.  
  3188.  
  3189.                                                                  Index  iii
  3190.  
  3191.                               Project, Edit Autoboot . . . . . . . . . . 19
  3192.                               Project, Keypads . . . . . . . . . . . . . 20
  3193.                               Project, Quit  . . . . . . . . . . . . . . 21
  3194.                               Project, Save Preferences  . . . . . . . . 20
  3195.                               Project, Set Preferences . . . . . . . . . 19
  3196.                               Prt Text . . . . . . . . . . . . . . . . . 13
  3197.                               Quit . . . . . . . . . . . . . . . . . . . 13
  3198.                               Relabel  . . . . . . . . . . . . . . . . . 13
  3199.                               Rename . . . . . . . . . . . . . . . . . . 13
  3200.                               Save Defaults  . . . . . . . . . . . . . . 14
  3201.                               Save defaults at closing . . . . . . . . . 38
  3202.                               Save window positions  . . . . . . . . . . 38
  3203.                               Search Text  . . . . . . . . . . . . . . . 14
  3204.                               Sel ABoot  . . . . . . . . . . . . . . . . 14
  3205.                               Sel Dir  . . . . . . . . . . . . . . . . . 14
  3206.                               Sel File . . . . . . . . . . . . . . . . . 14
  3207.                               Sel Pattern  . . . . . . . . . . . . . . . 14
  3208.                               Sel Src  . . . . . . . . . . . . . . . . . 14
  3209.                               Select All . . . . . . . . . . . . . . . . 14
  3210.                               SelSrcDir  . . . . . . . . . . . . . . . . 14
  3211.                               SelSrcFile . . . . . . . . . . . . . . . . 14
  3212.                               Set Defaults . . . . . . . . . . . . . . . 14
  3213.                               Set Protect  . . . . . . . . . . . . . . . 16
  3214.                               Set Protect Deep . . . . . . . . . . . . . 16
  3215.                               Setting Device Gadget  . . . . . . . . . . 32
  3216.                               Setting Menu Sets  . . . . . . . . . . . . 32
  3217.                               Show Menu  . . . . . . . . . . . . . . . . 27
  3218.                               Show, All  . . . . . . . . . . . . . . . . 27
  3219.                               Show, Comment  . . . . . . . . . . . . . . 27
  3220.                               Show, Date . . . . . . . . . . . . . . . . 27
  3221.                               Show, None . . . . . . . . . . . . . . . . 27
  3222.                               Show, Protection . . . . . . . . . . . . . 27
  3223.                               Show, Reset All  . . . . . . . . . . . . . 28
  3224.                               Show, Size . . . . . . . . . . . . . . . . 27
  3225.                               Show, Sort O . . . . . . . . . . . . . . . 28
  3226.                               Simple refresh windows . . . . . . . . . . 38
  3227.                               Source icon for directories  . . . . . . . 40
  3228.                               Starting MegaD . . . . . . . . . . . . . .  2
  3229.                               Summary  . . . . . . . . . . . . . . . . . 47
  3230.                               The Main Window  . . . . . . . . . . . . .  3
  3231.                               Two Manuals  . . . . . . . . . . . . . . .  1
  3232.                               Update Dir . . . . . . . . . . . . . . . . 17
  3233.                               Use Today / Yesterday  . . . . . . . . . . 35
  3234.                               Using MegaD  . . . . . . . . . . . . . . .  3
  3235.                               Utilities Menu . . . . . . . . . . . . . . 23
  3236.                               Utilities, Copy/Format . . . . . . . . . . 24
  3237.                               Utilities, Utilities in Window . . . . . . 24
  3238.                               View Text  . . . . . . . . . . . . . . 17, 40
  3239.                               Warn before copy . . . . . . . . . . . . . 38
  3240.                               Warn before delete . . . . . . . . . . . . 38
  3241.  
  3242.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  3243.                                        Document Prepared by  Timothy Madden
  3244.  
  3245.  
  3246.  
  3247.  
  3248.  
  3249.                                                                   Index  iv
  3250.  
  3251.                               Warn before move . . . . . . . . . . . . . 38
  3252.                               Warn if deleting protected file  . . . . . 38
  3253.                               Warn if replacing file . . . . . . . . . . 38
  3254.                               Warn if replacing larger file  . . . . . . 38
  3255.                               Warn if replacing newer file . . . . . . . 38
  3256.                               Windows Menu . . . . . . . . . . . . . . . 21
  3257.                               Windows, Close Windows . . . . . . . . . . 21
  3258.                               Windows, Open Windows  . . . . . . . . . . 21
  3259.                               Windows, Set Snapshot  . . . . . . . . . . 22
  3260.                               Windows, Two Window Utility  . . . . . . . 22
  3261.                               Windows, Use Grid  . . . . . . . . . . . . 22
  3262.                               Windows, Use Limits  . . . . . . . . . . . 22
  3263.                               Windows, Use Overlap Locations . . . . . . 21
  3264.                               Windows, Use Snapshot  . . . . . . . . . . 22
  3265.  
  3266.  
  3267.  
  3268.  
  3269.  
  3270.  
  3271.  
  3272.  
  3273.  
  3274.  
  3275.  
  3276.  
  3277.  
  3278.  
  3279.  
  3280.  
  3281.  
  3282.  
  3283.  
  3284.  
  3285.  
  3286.  
  3287.  
  3288.  
  3289.  
  3290.  
  3291.  
  3292.  
  3293.  
  3294.  
  3295.  
  3296.  
  3297.  
  3298.  
  3299.  
  3300.  
  3301.  
  3302.                      MegaD 2.00  Copyright © 1990, 1991, 1992 John L. Jones
  3303.                                        Document Prepared by  Timothy Madden
  3304.