home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The First Hungarian Family
/
The_First_Hungarian_Family_CD-ROM.bin
/
internet
/
offlread
/
1st200
/
a
/
readme.now
< prev
next >
Wrap
Text File
|
1995-07-19
|
3KB
|
87 lines
┌──═════════════════──┐
│ ▄▄▄ │
│ █ █ │
│ █▄▄▀ mail 1stReader │ Copyright 1995 by Mark Herring
│ ▀ 2.00 │ All Rights Reserved
└─────────────────────┘
These files comprise the full 1stReader 2.00 release. Note that
you only need to download 1ST-200A.ZIP and 1ST-200B.ZIP to make
up the "basic" 1stReader 2.00 release.
1ST-200A.ZIP 860k Part 1 of the 1stReader 2.00 system.
1ST-200B.ZIP 799k Manuals, database, RIP and other files
related to the general release.
1ST-200C.ZIP 495k 1stEdit and 1stSpell utilities.
1ST-200D.ZIP 955k Multimedia (MME) sound files.
1ST-200E.ZIP 244k Programmer's docs and utilities.
1ST-200F.ZIP 377k Special 1ST.EXE for 386 & higher systems
1ST-200C.ZIP, 1ST-200D.ZIP, 1ST-200E.ZIP and 1ST-200F.ZIP are
optional and can be added either when you first install 1stReader
or at any later time you wish.
Updating from an earlier 1stReader release
──────────────────────────────────────────
If you are a current user of 1stReader, you should ensure that your
1stReader system and files are backed-up before proceeding. At the
very least, ensure that your registration key (1ST.KEY) is copied
to a diskette.
The INSTALL process will present you with an "UPDATE" button. You
should select this option to update your 1stReader system to the
2.00 release.
Suggested steps to installing or updating 1stReader
───────────────────────────────────────────────────
The first step to installing 1stReader is to make a temporary work
subdirectory. All the distribution files MUST be placed in this one
work subdirectory. After installation is complete, 1stReader will
delete the original .ZIP files for you.
Type these commands from your DOS command prompt. Press the [ENTER]
after each command:
C:
CD \
MD \TEMP
CD \TEMP
Now copy the files 1ST-200A.ZIP and 1ST-200B.ZIP into C:\TEMP using
the DOS command:
COPY 1ST-200*.ZIP C:\TEMP
Then unpack (or 'unzip') the files into the C:\TEMP subdirectory
using the DOS command:
PKUNZIP -O *.ZIP
When all of then files have been unpacked type:
INSTALL
Then following the information presented to you on your computer's
screen. If you have any questions concerning this 1stReader release
you can reach us at:
Sparkware
Post Office Box 386
Hendersonville, TN 37077-0386
USA
BBS: (615) 230-8822
email: help@sparkware.com