Simtel MSDOS 1992 June

home *** CD-ROM | disk | FTP | other *** search

/ Simtel MSDOS 1992 June / SIMTEL_0692.cdr / msdos / zmodem / hotk_z60.arc / HOTKEY-Z.DOC next >

Wrap

Text File | 1989-03-29 | 37.2 KB | 718 lines

╔═════════════════════════════════╗ ║ HotKey-Z v6.0 ║ ║ Documentation ║ ║ 04-01-89 ║ ║ Copyright 1989 Mark A. Albrecht ║ ║ All Rights Reserved ║ ╚═════════════════════════════════╝ Prior to running this application, please read the section titled SHAREWARE at the conclusion of this document. Also, read the section titled HISTORY, as it may describe recently added features undocumented elsewhere. D I S C L A I M E R The author, Mark A. Albrecht, makes no warranties expressed or implied as to the quality or performance of this program, nor its fitness for a particular purpose. The author will not be held liable for any direct, indirect, incidental, or consequential damages resulting from the use of this program and *YOUR USE OF THIS PROGRAM CONSTITUTES YOUR AGREEMENT TO THIS DISCLAIMER* as well as your release of the author from any form of liability or litigation. ╔══════════════╗ ═════╣ DESCRIPTION: ╠══════════════════════════════════════════════════ ╚══════════════╝ HotKey-Z is a menu-driven interface for the popular file transfer protocols of Chuck Forsberg's DSZ module. (DSZ is a spectacular program. If you use DSZ beyond a trial period, please register with Mr. Forsberg.) PROTOCOLS SUPPORTED: Support is provided for DSZ's X/Y/Zmodem protocols as well as two additional user-defined external protocols. Jmodem is included in the archive and HotKey-Z's menu provides default settings for using it. CONFIGURABLE: All arguments/parameters to be passed to DSZ, cluding default download directories, may be specified and saved in HotKey-Z's internal config- uration utility. FILE SELECTION MENU: Files to be uploaded are selected via a point-and- shoot style menu. Up to 100 filespecs may be "tagged" for Zmodem and Ymodem batch uploads. Any drive and/or directory is accessible, and a default upload directory (where the file selection window will first open) may be specified and saved in the configuration utility. MOUSE SUPPORT: All menus feature built-in mouse drivers and are operated using standard mouse commands. FAST AND EFFICIENT: HotKey-Z is written in Turbo Pascal 5.0 (tm), with much of the code (including ALL screen writes) written in assembler language. Every function of HotKey-Z has been coded to provide lightning-fast execution, while reducing disk and RAM overhead to a minimum. ╔══════════════════════╗ ═════╣ SYSTEM REQUIREMENTS: ╠══════════════════════════════════════════ ╚══════════════════════╝ 1 - IBM PC or compatible. 2 - PC/MS DOS 3.0 or later. 3 - Approximately 59K planar RAM in addition to that required by DSZ. 4 - Efficiency is enhanced by using HotKey-Z on a hard disk but performance is acceptable on a floppy. 5 - Color or monochrome monitor. 6 - A communication program supporting access to HotKey-Z via a hotkey or DOS gateway. ╔═══════════════╗ ═════╣ INSTALLATION: ╠═════════════════════════════════════════════════ ╚═══════════════╝ Follow these instructions step-by-step and HotKey-Z should be ready to run. 1. copy HotKey-Z to any directory in your DOS path; 2. Add DSZ's pathspec to your "PATH=" command in your AUTOEXEC.BAT file of your root directory; 3. Add the lines "FILES=20" and "BUFFERS=20" to your CONFIG.SYS file. 4. Run your communications program and attach HotKey-Z to a hotkey of the communications program. For example, Procomm Plus (R) has two hotkeys as of this writing: "ALT-J" and "ALT-U". 5. Run HotKey-Z and select it's main menu option "CONFIGURE". The CONFIGURE option is comprised of three sub-options: "UPLOADS", "DOWNLOADS", and "OTHER". When submenu option "UPLOADS" is selected, an input menu pops up which contains edit fields in which you will enter commandline parameters corresponding to the five upload protocols of HotKey-Z. When submenu option "DOWNLOADS" is selected, an input menu pops up which contains fields corresponding to the download protocols. Submenu option "OTHER" contains various other configurable parameters. A summary of input menu editing commands is listed on the status line. A detailed description for each of the three "CONFIGURE" submenu options ("UPLOADS", "DOWNLOADS", "OTHER") follows. Each menu option's description follows an illustration of the menu option being described and subdivided according to the edit fields being described. Main option CONFIGURE, sub option UPLOADS: ┌─────────────────────────────────────────────────────────────────────┐ │ Upload Download █Configure█ Information System Quit │ └───────────────────────┬───────────┬─────────────────────────────────┘ │█Uploads███│ │ Downloads │ │ Other │ └───────────┘ Zmodem Upload Commandline: ┌──────────────────────────────────────────────────────┐ │ dsz sz -r ^ │ └──────────────────────────────────────────────────────┘ This input field holds the entire commandline that will be passed to DOS to call DSZ and initiate a Zmodem upload. A caret symbol ("^") MUST be placed as the last parameter in this commandline, as it symbolizes the exact position HotKey-Z will insert the name of the file chosen from the directory display window to be uploaded. The default commandline provided will work as-is provided you have your modem connected through COM1. Ymodem Upload Commandline: ┌──────────────────────────────────────────────────────┐ │ dsz sb -k ^ │ └──────────────────────────────────────────────────────┘ This input field holds the entire commandline that will be passed to DOS to call DSZ and initiate a Ymodem upload. A caret symbol ("^") MUST be placed as the last parameter in this commandline, as it symbolizes the exact position HotKey-Z will insert the name of the file chosen from the directory display window to be uploaded. The default commandline provided will work as-is provided you have your modem connected through COM1 (note that the default contains the "-k" argument, which instructs DSZ to use 1k data blocks. Xmodem Upload Commandline: ┌──────────────────────────────────────────────────────┐ │ dsz sx ^ │ └──────────────────────────────────────────────────────┘ This input field holds the entire commandline that will be passed to DOS to call DSZ and initiate an Xmodem upload. A caret symbol ("^") MUST be placed as the last parameter in this commandline, as it symbolizes the exact position HotKey-Z will insert the name of the file chosen from the directory display window to be uploaded. The default commandline provided will work as-is provided you have your modem connected through COM1. Name 1: User Defined Protocol 1 Upload Commandline: ┌──────┐ ┌─────────────────────────────────────────────┐ │Jmodem│ │jmodem S1 ^ │ └──────┘ └─────────────────────────────────────────────┘ | | | | | This input field holds the entire commandline that will | be passed to DOS to call your 1st user-defined protocol, | (the default will execute JMODEM.COM and instruct it to | send a file through COM1. A caret ("^") MUST be placed at | that position in the commandline where HotKey-Z should | insert the filename chosen from the directory display. | Enter the MENU name you wish to give the first of two user-defined upload protocols. One of the characters in the menu name MUST be capitalized, and the capitalized character MUST NOT be the same as any capitalized character in one of the other four upload protocol menu names (i.e., cannot be "Z", "Y", "X" or the capitalized char- acter of the other user-defined upload protocol menu name). Name 2: User Defined Protocol 2 Upload Commandline: ┌──────┐ ┌─────────────────────────────────────────────┐ │Kmodem│ │dsz sx -k ^ │ └──────┘ └─────────────────────────────────────────────┘ | | | | | This input field holds the entire commandline that will | be passed to DOS to call your 2nd user-defined protocol, | (the default will execute DSZ [.COM or .EXE] and instruct | it to send a file via "1k Xmodem" through COM1. A caret | ("^") MUST be placed at that position in the commandline | where HotKey-Z should insert the filename chosen from the | directory display. | Enter the MENU name you wish to give the second user-defined up- upload protocol. One of the characters in the menu name MUST be capitalized, and the capitalized character MUST NOT be the same as any capitalized character in one of the other four upload protocol menu names (i.e., cannot be "Z", "Y", "X" or the capitalized char- acter of the other user-defined upload protocol menu name). Main option CONFIGURE, sub option DOWNLOADS: ┌─────────────────────────────────────────────────────────────────────┐ │ Upload Download █Configure█ Information System Quit │ └───────────────────────┬───────────┬─────────────────────────────────┘ │ Uploads │ │█Downloads█│ │ Other │ └───────────┘ Zmodem Download Commandline: ┌──────────────────────────────────────────────────────┐ │ dsz rz -r │ └──────────────────────────────────────────────────────┘ This input field holds the entire commandline that will be passed to DOS to call DSZ and initiate a Zmodem download. A caret symbol ("^") NEED NOT be placed in this commandline. (Since Zmodem is a batch protocol, the name is passed by the sender during transfer.) The default commandline provided will work as-is provided you have your modem connected through COM1. If you wish to have the file written to a specific directory, enter the directory's pathspec as the last argument. Ymodem Download Commandline: ┌──────────────────────────────────────────────────────┐ │ dsz rb │ └──────────────────────────────────────────────────────┘ This input field holds the entire commandline that will be passed to DOS to call DSZ and initiate a Ymodem download. A caret symbol ("^") NEED NOT be placed in this commandline. (Since Ymodem is a batch protocol, the name is passed by the sender during transfer.) The default commandline provided will work as-is provided you have your modem connected through COM1. If you wish to have the file written to a specific directory, enter the directory's pathspec as the last argument. Xmodem Download Commandline: ┌──────────────────────────────────────────────────────┐ │ dsz rx ^ │ └──────────────────────────────────────────────────────┘ This input field holds the entire commandline that will be passed to DOS to call DSZ and initiate a Ymodem download. A caret symbol ("^") MUST be placed in this commandline, separated from the pre- ceding commandline argument by one whitespace. The caret instructs HotKey-Z to prompt you for the name of the file to be downloaded, then inserts this name in the commandline at the position it finds the caret symbol. The default commandline provided will work as-is provided you have your modem connected through COM1. If you wish to have the file written to a specific directory, then precede the caret with the pathspec of the directory, e.g., "C:\DIR\^". Name 1: User Defined Protocol 1 Download Commandline: ┌──────┐ ┌─────────────────────────────────────────────┐ │Jmodem│ │jmodem R1 ^ │ └──────┘ └─────────────────────────────────────────────┘ | | | | | This input field holds the entire commandline that will | be passed to DOS to call your first user-defined down- | load protocol. A caret symbol MUST be placed in this | commandline, separated from the preceding argument by one | whitespace. The caret instructs HotKey-Z to prompt you | for the name of the file to be downloaded, then inserts | this name in the commandline at the position it finds the | caret symbol. The default commandline provided will work | provided you have your modem connected through COM1 and | JMODEM.COM can be found. If you wish to have the file | written to a specific directory, precede the caret with a | pathspec, e.g., "C:\DIR\^". | Enter the MENU name you wish to give the first of two user-defined download protocols. One of the characters in the menu name MUST be capitalized, and the capitalized character MUST NOT be the same as any capitalized character in one of the other four download proto- col menu names (i.e., cannot be "Z", "Y", "X", or the capitalized character of the other user-defined upload protocol menu name). Name 2: User Defined Protocol 2 Download Commandline: ┌──────┐ ┌─────────────────────────────────────────────┐ │Kmodem│ │dsz rx -c ^ │ └──────┘ └─────────────────────────────────────────────┘ | | | | | This input field holds the entire commandline that will | be passed to DOS to call your second user-defined down- | load protocol. A caret symbol MUST be placed in this | commandline, separated from the preceding argument by one | whitespace. The caret instructs HotKey-Z to prompt you | for the name of the file to be downloaded, then inserts | this name in the commandline at the position it finds the | caret symbol. The default commandline provided will work | provided you have your modem connected through COM1. | (Note that we have defined "Kmodem" as DSZ's "Xmodem" but | by using the "-c" argument DSZ will use CRC checking and | if 1k data blocks are sent, DSZ will receive 1k blocks). | If you wish to have the file written to a specific dir- | ectory, precede the caret with a path, e.g., "C\DIR\^". | Enter the MENU name you wish to give the second of the two user- defined download protocols. One of the characters in the menu name MUST be capitalized, and the capitalized character MUST NOT be the same as any capitalized character in one of the other four down- load protocol menu names (i.e., cannot be "Z", "Y", "X", or the capitalized character of the other user-defined upload protocol menu name). Main option CONFIGURE, sub option OTHER: ┌─────────────────────────────────────────────────────────────────────┐ │ Upload Download █Configure█ Information System Quit │ └───────────────────────┬───────────┬─────────────────────────────────┘ │ Uploads │ │ Downloads │ │█Other█████│ └───────────┘ Default Upload Directory: ┌──────────────────────────────────────────────────────┐ │?:\????????\???????? │ └──────────────────────────────────────────────────────┘ This field holds the default disk directory where HotKey-Z will first open the directory display window for selecting file(s) to upload. The default is the currently logged directory. Change the default to any valid directory on any valid drive. ┌─┐ Sound alarm on transfer completions? [y/n] │Y│ └─┘ Change the default to "N" if you do not wish to have a beep sound upon completion of file transfers. ┌─┐ Should screen display in monochrome? [y/n] │N│ └─┘ This should default to "N" if a color display is present. If you want HotKey-Z to display in black and white, enter "Y". If you do have some type of color display and you want HotKey-Z to use your color capability, enter "N". ┌─┐ Should HotKey-Z use window whistles? [y/n] │Y│ └─┘ Leave the default if you want window whistles, or change to "N" if you can't stand them! HotKey-Z should now be fully configured to run. Browse through the op- erating instructions below, and then get to it! ╔══════════════════╗ ═════╣ MENU MECHANICS : ╠══════════════════════════════════════════════ ╚══════════════════╝ 1. Main menu and submenu items may be selected in one of two ways: * By using the arrow keys to move the cursor bar over the menu selection, then pressing the carriage return key. * By pressing the character key corresponding to the highlighted capitalized initial of the menu item. (On mono displays, the capitalized letter will not be highlighted.) 2. Pressing the ESCAPE key at any time will return the cursor back to the default main menu item. 3. The main menu consists of six items: UPLOAD, DOWNLOAD, CONFIGURE, INFORMATION, SYSTEM, and QUIT. A discussion of each follows. ╔═════════════════════╗ ═════╣ SPECIFIC FUNCTIONS: ╠═══════════════════════════════════════════ ╚═════════════════════╝ Major functions are listed below under illustrations of each of their associated menu commands. Main option UPLOAD, sub option ZMODEM: ┌─────────────────────────────────────────────────────────────────────┐ │ █Upload█ Download Configure Information System Quit │ └┬────────┬───────────────────────────────────────────────────────────┘ │█Zmodem█│ Choosing this menu item will pop up a directory display │ Ymodem │ where you may tag up to 100 filenames to send via DSZ's │ Xmodem │ Zmodem batch protocol. The tagged names will be written │ Jmodem │ to a text file and DSZ will be passed it's indirection │ Kmodem │ operator ("@") and the text file's name in place of the └────────┘ caret symbol found in the "ZMODEM UPLOAD COMMANDLINE". Main option UPLOAD, sub option YMODEM: ┌─────────────────────────────────────────────────────────────────────┐ │ █Upload█ Download Configure Information System Quit │ └┬────────┬───────────────────────────────────────────────────────────┘ │ Zmodem │ Choosing this menu item will pop up a directory display │█Ymodem█│ where you may tag up to 100 filenames to send via DSZ's │ Xmodem │ Ymodem batch protocol. The tagged names will be written │ Jmodem │ to a text file and DSZ will be passed it's indirection │ Kmodem │ operator ("@") and the text file's name in place of the └────────┘ caret symbol found in the "YMODEM UPLOAD COMMANDLINE". Main option UPLOAD, sub option XMODEM: ┌─────────────────────────────────────────────────────────────────────┐ │ █Upload█ Download Configure Information System Quit │ └┬────────┬───────────────────────────────────────────────────────────┘ │ Zmodem │ Choosing this menu item will pop up a directory display │ Ymodem │ where you may select a file to send via DSZ's Xmodem │█Xmodem█│ protocol. The caret symbol found in the "XMODEM UPLOAD │ Jmodem │ COMMANDLINE" will be replaced by the filename selected. │ Kmodem │ The commandline will be passed to DOS for execution. └────────┘ Main option UPLOAD, sub option JMODEM: ┌─────────────────────────────────────────────────────────────────────┐ │ █Upload█ Download Configure Information System Quit │ └┬────────┬───────────────────────────────────────────────────────────┘ │ Zmodem │ Choosing this menu item will pop up a directory display │ Ymodem │ where you may select a file to send via the first of two │ Xmodem │ user-defined protocols (the default provided is Jmodem). │█Jmodem█│ The caret symbol in the "USER DEFINED PROTOCOL 1 UPLOAD │ Kmodem │ COMMANDLINE" will be replaced by the filename chosen and └────────┘ passed to DOS for execution. Main option UPLOAD, sub option KMODEM: ┌─────────────────────────────────────────────────────────────────────┐ │ █Upload█ Download Configure Information System Quit │ └┬────────┬───────────────────────────────────────────────────────────┘ │ Zmodem │ Choosing this menu item will pop up a directory display │ Ymodem │ where you may select a file to send via the second user- │ Xmodem │ defined protocol (the default provided is Jmodem). The │ Jmodem │ caret symbol found in "USER DEFINED PROTOCOL 2 UPLOAD │█Kmodem█│ COMMANDLINE" will be replaced by the filename chosen and └────────┘ passed to DOS for execution. Main option DOWNLOAD, sub option ZMODEM: ┌─────────────────────────────────────────────────────────────────────┐ │ Upload █Download█ Configure Information System Quit │ └────────────┬────────┬───────────────────────────────────────────────┘ │█Zmodem█│ Choosing this menu item will cause HotKey-Z to │ Ymodem │ pass the contents of the "ZMODEM DOWNLOAD │ Xmodem │ COMMANDLINE" to DOS for execution. │ Jmodem │ │ Kmodem │ └────────┘ Main option DOWNLOAD, sub option YMODEM: ┌─────────────────────────────────────────────────────────────────────┐ │ Upload █Download█ Configure Information System Quit │ └────────────┬────────┬───────────────────────────────────────────────┘ │ Zmodem │ Choosing this menu item will cause HotKey-Z to │█Ymodem█│ pass the contents of the "YMODEM DOWNLOAD │ Xmodem │ COMMANDLINE" to DOS for execution. │ Jmodem │ │ Kmodem │ └────────┘ Main option DOWNLOAD, sub option XMODEM: ┌─────────────────────────────────────────────────────────────────────┐ │ Upload █Download█ Configure Information System Quit │ └────────────┬────────┬───────────────────────────────────────────────┘ │ Zmodem │ Choosing this menu item will cause HotKey-Z to │ Ymodem │ pass the contents of the "XMODEM DOWNLOAD │█Xmodem█│ COMMANDLINE" to DOS for execution. │ Jmodem │ │ Kmodem │ └────────┘ Main option DOWNLOAD, sub option JMODEM: ┌─────────────────────────────────────────────────────────────────────┐ │ Upload █Download█ Configure Information System Quit │ └────────────┬────────┬───────────────────────────────────────────────┘ │ Zmodem │ Choosing this menu item will cause HotKey-Z to │ Ymodem │ pass the "USER DEFINED PROTOCOL 1 DOWNLOAD │ Xmodem │ COMMANDLINE" to DOS for execution. │█Jmodem█│ │ Kmodem │ └────────┘ Main option DOWNLOAD, sub option KMODEM: ┌─────────────────────────────────────────────────────────────────────┐ │ Upload █Download█ Configure Information System Quit │ └────────────┬────────┬───────────────────────────────────────────────┘ │ Zmodem │ Choosing this menu item will cause HotKey-Z to │ Ymodem │ pass the "USER DEFINED PROTOCOL 2 DOWNLOAD │ Xmodem │ COMMANDLINE" to DOS for execution. │ Jmodem │ │█Kmodem█│ └────────┘ Main option CONFIGURE: ┌─────────────────────────────────────────────────────────────────────┐ │ Upload Download █Configure█ Information System Quit │ └─────────────────────────────────────────────────────────────────────┘ The "CONFIGURE" option is discussed above, under the section header titled "INSTALLATION". Main option INFORMATION: ┌─────────────────────────────────────────────────────────────────────┐ │ Upload Download Configure █Information█ System Quit │ └─────────────────────────────────────────────────────────────────────┘ Choosing this menu item pops up a window displaying: -the current date and time; -the currently logged disk drive; -the total size in bytes of the currently logged disk drive; -the bytes used on the currently logged disk drive; -the bytes free on the currently logged disk drive. ┌─────────────────────────────────────────────────────────────────────┐ │ Upload Download Configure Information █System█ Quit │ └───────────────────────────────────────────────────┬─────────┬───────┘ Choosing this menu item causes HotKey-Z to drop the │█Shell███│ user to the DOS system for running any DOS command. │ Command │ To return to the program, enter "EXIT". └─────────┘ ┌─────────────────────────────────────────────────────────────────────┐ │ Upload Download Configure Information █System█ Quit │ └───────────────────────────────────────────────────┬─────────┬───────┘ Choosing this menu item causes HotKey-Z to pop up │█Shell███│ an input field in which a command may be entered │ Command │ and passed to DOS for execution. If you wish to └─────────┘ select a filename to embed in the command, place a caret symbol ("^") at the position in the command where the filename should be inserted. If a caret is found, HotKey-Z will pop up the directory display window, where you may select a filename to replace the commandline caret (much like the procedure for uploading files with HotKey-Z). ┌─────────────────────────────────────────────────────────────────────┐ │ Upload Download Configure Information System █Quit█ │ └─────────────────────────────────────────────────────────────────────┘ Exits the user from HotKey-Z. ╔══════════╗ ═════╣ HISTORY: ╠══════════════════════════════════════════════════════ ╚══════════╝ Version 1.0 - 4.8: * added support for batch uploads with Zmodem and Ymodem; * added support for two additional user-defined protocols; * added support for disk file manipulation functions; * added support for protocol commandline modification; * reduced executable code size by more than 40 percent; * reduced planar RAM requirement by more than 50 percent; * eliminated several non-fatal bugs reported by users; * numerous subtle enhancements to improve execution speed and program display. Version 5.0 - 5.4: * now compiled with Turbo Pascal 5.0 (R), providing faster invocation, smaller executable code, and greater speed; * added support for a default upload directory where HotKey-Z will first open its UPLOAD file display window; * split up the CONFIGURE main menu option into three submenu options: one for upload parameters, one for download parameters, and one for everything else. * gave several operations back to DOS in order to further reduce RAM and executable code overhead (HotKey-Z 5.0 is at least twice as powerful as 1.0, but half the size); * eliminated some of HotKey-Z's code modularity to reduce stack usage and provide improved execution efficiency; * directory display file limit has been changed: HotKey-Z is now capable of reading up to 350 files per directory; * added color/monochrome display adaptor auto-detection; * DOS EXEC functions rewritten to ensure proper hardware interrupt vector restoration; * utilized more assembly language for even faster display; * input prompt procedures were completely rewritten to resemble those used in other popular applications; * HotKey-Z may now reside in a directory other than the directory in which the communication program resides; * the HOME/END keys will now cause the cursorbar to jump to the top/bottom of the file directory display window; * you may now enter menu commands on the DOS commandline when invoking HotKey-Z in order to bypass the menus: HotKey-Z will read the commandline and interpret it as a string of menu initials. For example: ZMODEM DOWNLOAD: if you called HotKey-Z from your communication program with the commandline "HOTKEY-Z.EXE dz" it will cause the program to begin a DOWNLOAD (d) using Zmodem (z); Any combination of main menu and submenu commands may be issued from the commandline by entering the menu item's initial in the order you would issue them once inside HotKey-Z. Commandline arguments are not case-sensitive. If, for example, you are using Procomm Plus, and you have HotKey-Z set up as an external protocol (i.e., called by pressing Page-Down or Page-Up), then you could type "dz" at Procomm Plus's commandline prompt and press Carriage Return and a Zmodem download would commence. * eliminated a bug that trashed the directory display when the file displayed was one megabyte or larger in size; * upon program termination, a null character is placed in the keyboard buffer to bypass your comm program's "PRESS ANY KEY..." prompt. * fixed a bug that prevented changing to some directories having names comprised of both letters and digits (this one was a dandy to track down... %$#@*&!); * modified directory display to resemble DOS's "DIR"; * rewrote directory reading procedure to enhance speed; * added file creation date display for directory entries; * eliminated bug when changing display from color to mono; * COMPLETELY rewrote this .DOC file (improved, hopefully); Version 6.0: * eliminated use-counter (I suspect registrations will now drop to zero but I've grown tired of listening to the lowlifes complain that use-counters/delays and such make it difficult for them to be dishonest and dishonorable); * no more FILES functions per se, instead, the SYSTEM commands now handle those tasks; * reduced code size; * with the elimination of the use-counter, registrants no longer receive the latest version in the mail (i.e., the registration allows LEGITIMATE use of the publicly dis- tributed copy; ╔════════════╗ ═════╣ SHAREWARE: ╠════════════════════════════════════════════════════ ╚════════════╝ HotKey-Z is the culmination of hundreds of hours of work. It has matured into the most powerful DSZ interface on the market. To assist in the continued development of HotKey-Z, the author is distributing the publicly released version under the ShareWare concept. Use of this application beyond a trial period (typically two weeks) requires regis- tration. Unfortunately, I have discovered hundreds of instances where the program has been used beyond what any reasonable person would define as a trial period. I think this is unfair, particularly given the nominal registration fee requested. Please support Shareware by reimbursing authors for their time, effort, and distribution expenses. Enclosed in this archive is the registration form for HotKey-Z, titled "REGISTER.ME". Just print it out and fill in the lines. Mail to: Mark Albrecht PO Box 2064 Sioux City, IA 51104 ╔══════════════════════════╗ ═════╣ UPDATES AND INFORMATION: ╠══════════════════════════════════════ ╚══════════════════════════╝ Updates to and new releases of HotKey-Z may be found on this BBS operated by Andy Flatt: The NightHawk BBS (319) 338-2961 Iowa City, IA A well-maintained and active board that is free and open to all users from their very first call. Callers may leave messages to me (Mark Albrecht) and I will usually respond within 24 hours. New releases may be found in the COMM file directory. Just read or leave a message and you may download the latest release on your very first call. Thank you for using and supporting HotKey-Z. I hope it fulfills a need. ╔══════════════════╗ ═════╣ ACKNOWLEDGEMENT: ╠══════════════════════════════════════════════ ╚══════════════════╝ NOTE: the following acknowledgements reflect the respective copyrights and/or trademarks known to be in existence as of this writing. -Thanks go to Dr. Alex Deluca for beta testing various releases of the program, and to Andy Flatt for graciously allowing me to field user questions and distribute HotKey-Z via his bulletin board system. -DSZ Copyright 1989 Omen Technology, Incorporated. All rights reserved. -Turbo Pascal 5.0 is a registered trademark of Borland International, Incorporated. -Procomm Plus is a registered trademark of Datastorm Technologies, Inc.