home *** CD-ROM | disk | FTP | other *** search
-
-
-
- == External Protocols for QMODEM ==
- *** TMS Micro - (602)955-3465 ***
- Ocean Breeze-BBS (602)nnn-nnnn 24 Hours a day Phoenix, AZ.
- ^
- |
- +----- Not available at this time!
-
- BIMODR - Bimodem (Recv) Batch File
- BIMODS - Bimodem (Xmit) Batch File
-
- CLINKR - Sea-Link (Recv) Batch File
- CLINKRO - Sea-Link (Recv) Batch File with OverDrive
- CLINKS - Sea-Link (Xmit) Batch File
- CLINKSO - Sea-Link (Xmit) Batch File with OverDrive
-
- CMODR - CMODEM (Recv) Batch File
- CMODS - CMODEM (Xmit) Batch File
-
- JMODR - Jmodem (Recv) Batch File *
- JMODS - Jmodem (Xmit) Batch File
-
- KERMITR - PC-Kermit (Recv) Batch File
- KERMITS - PC-Kermit (Xmit) Batch File
-
- LYNXR - Lynx (Recv) Batch File
- LYNXS - Lynx (Xmit) Batch File
-
- MLINKR - Mlink (Recv) Batch File
- MLINKS - Mlink (Xmit) Batch File
-
- PUMAR - PUMA (Recv) Batch File
- PUMAS - PUMA (Xmit) Batch File
-
- SUPR8K-R - SuperK (Recv) Batch File
- SUPR8K-S - SuperK (Xmit) Batch File
-
- WXR - WXmodem (Recv) Batch File *
- WXS - WXmodem (Xmit) Batch File
-
- ZMODR - Zmodem (Recv) Batch File
- ZMODS - Zmodem (Xmit) Batch File
-
- ZMODRC - Zmodem (Recv) Batch File with ANSI Color
- ZMODSC - Zmodem (Xmit) Batch File with ANSI Color
-
- * means that "Y" MUST be answered for: 'Download File Prompt'
- in QMODEM'S install for External Protocols.
-
-
- ---------------------- SPECIAL NOTES ! ----------------------
-
- ENDSND - Handy if your not watching your PC, This
- will send an Alarm when Xfer. is finished...
- (You will find this in some of these BATCH Files)
-
- Z_SIG - Another type of sound to add to your .BAT files
- if you want noise to get your attention!
- === CAUTION === It has been reported that some TSRs
- screw this thing up, with unpre-
- dictable results!! YOU HAVE BEEN
- WARNED...
-
- BIMODEM - When using BIMODEM with QMODEM 4.x, I choose "B"
- for the character to hit. But with QMODEM 3.x, this
- was already used for Batch Ymodem Downloads, so I
- choose "E" (use whatever at your discretion)!
- NOTE: These .BAT files are for version BIMOD114
- or older. *NOT* working with Bimodem 1.20 yet!
-
- Also, the .BAT files for BIMODEM are for single
- file transfers! If you want to do Batch-UP/DOWN
- loads, then you might consider replacing BMODx.BAT
- with BIMENU91 or later. This way you can choose
- which files to transfer from this menu system.
-
-
- CMODEM - The "Command Line String" *MUST* be followed to the
- letter, or this Protocol 'WILL-NOT' work! I know;
- it took me 15 minutes to make this work, do to
- incorrect information in the Documentation...
-
-
-
- PUMA - This has got to be the greatest External Protocol
- since 'DIRT'! Its speed is *GOOD* and if nothing
- else, It's the prettiest thing to see running!!!
- There is a Configuration Program with it (PUMASET)
- And it is all you need to do to make it run. Switchs
- may be set on the command line, but *NOT* necessary
- with the CONFIG. Program. It seems to work best as
- follows for RTS/CTS type Modems.
-
- PUMA 1.00 Setup Program --
-
- ┌────────────────────────────────────────────────────────┐
- │ COM port : 1 Beep when finished : Yes │
- │ UART baud : Current Use 16550A FIFOs : No │
- │ Eff. baud : UART CTS/RTS handshake : Fast │
- │ COM 1 base : 3F8 DCD monitoring : Yes │
- │ COM 1 irq : 4 Modem hangup : No │
- │ COM 2 base : 2F8 Wait for key : No │
- │ COM 2 irq : 3 RLE compression : Yes │
- │ COM 3 base : 3E8 Kill aborted files : No │
- │ COM 3 irq : 4 Current date stamp : No │
- │ COM 4 base : 2E8 Overwriting files : Yes │
- │ COM 4 irq : 3 Resuming transfers : Yes │
- └────────────────────────────────────────────────────────┘
-
- ┌────────────────────────────────────────────────────────┐
- │ CDS log file = D:\QMDM\PUMA.LOG │
- │ DSZ log file = │
- └────────────────────────────────────────────────────────┘
- The above is your choice as far as logging.
-
-
-
- SUPERK -
-
- SuperK Setup - (initalized by typing superk @)
-
- C)olors - This was pretty blah in default, so for S)uperK
- mode so I changed: S=62 & U=113
-
- D) Logfile : SK4.LOG G) Write On 0 : No *$*
- E) XferFile: XFER.TXT H) Save Aborts: Yes (Like Zmodem) *$*
- F) OvlPath : I) Overwrite : No
- W) WrkPath : J) Resume DLs : Auto *$*
-
- PATSTACK - (Program used to Change Stack Size)
-
- Minimum Stack : 768
- Maximum Stack : 1024 *$*
-
- NOTE: *$* means Changed from Default.
-
-
-
- ZMODEM Switchs - If you DO-NOT have a "Registered" Copy
- of ZMODEM, then you will HAVE TO "REMOVE"
- pB4096 from 'ALL' .BATS, the -Z from
- ZMODS(C).BAT; and the -rr from ZMODR(C).BAT.
- (DSZ0319.ZIP or later)
-
- DOS - If you ARE NOT running DOS 3.3, then the "@" of @ECHO OFF
- will have to be removed! This is a handy way of keeping
- the screen from printing ECHO OFF. (undocumented info)
-
-
- NOTE: All have been tested with QMODEM 3.x & 4.x and were located
- in my sub-directory \QMDM. Also under \QMDM, were created
- \UPLD (Send File), \DNLD (Receive File) \BBS, (Bulletin Brd.
- Send File), \HOST (Bulletin Brd. Receive File). sub-directories.
-
- TREE -
- \QMDM
- |
- ---\BBS
- |
- ---\DNLD
- |
- ---\HOST
- |
- ---\UPLD
-
- Ted J. Mieske - T.M.S. Micro
- Ocean Breeze BBS
- DATE: 01/27/90 Phoenix, AZ
-
- Running an "AUNTIE" BBS
-
- NEW: See History File for
- run-down up Updates.
- HISTORY.DOC