home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DP Tool Club 26
/
CD_ASCQ_26_1295.iso
/
vrac
/
accrc_85.zip
/
ACCSALES.ASC
< prev
next >
Wrap
Text File
|
1990-11-22
|
3KB
|
69 lines
ARS:KA8R
Andy Kadvan Jr.
1835 Lynn Mar Ave.
Poland, Ohio 44514
Dear Interested Party,
Hi, I would like to tell you a little about my terminal program
for the IBM pc's and compatibles. It is designed to control the
ACC RC-85 and RC-96 repeater controller. It is used in conjunction
with a Hayes compatible modem with com one or two. The modem is used
to generate DTMF to the ACC controller just the same as the control
operator would do from his telephone key pad. The first time my
program is run it will ask you a series of questions about your
repeater.
1. MODEM IS ON COM 1 OR COM 2 ?
2. WHAT VERSION ACC FIRMWARE 2 OR 3 OR 4 ?
3. USER AUTO DIAL LOAD / ERASE COMMAND BANK 0?
4. USER AUTO DIAL LOAD / ERASE COMMAND BANK 1?
5. ACC UNLOCK CODE?
6. REPEATER PHONE NUMBER ?
7. DIAL REPEATER PULSE OR TONE <P/T> ?
8. HOW MANY SECONDS IT TAKES CONTROLLER TO ANSWER PHONE ?
9. WHAT TIME FOR SCHEDULING MACRO 1 (HH:MM:SS) OR (OFF) ?
10. WHAT TIME FOR SCHEDULING MACRO 2 (HH:MM:SS) OR (OFF) ?
11. ENTER YOUR PASSWORD FOR ENTRY OF PROGRAM ? <ENTER> = NONE
These answers are saved to a file called ACC.DAT. This file is
scrambled so it can not be viewed for editing for your security. The
program supports auto dial programing, configuration commands, and
control op commands with help from the ACC.DAT file. The configuration
command supports cw, voice, DVR, and external device set up's. An
example is, for speech you just type the word from the vocabulary and
the program sends the proper DTMF code from the modem to the controller.
From the main menu macro 1 - 5 are supported by calling the repeater,
invoking the selected macro, and hanging up with a single key stroke.
This program has been tested by Advanced Computer Control's and they
have given me full support of this program.
This program eliminates the use of the ACC manual once you are
familiar with this program and the controller. The list of speech
vocabulary words is all you will need. Many satisfied terminal program
owners have written me back with great satisfaction with this program.
The file name of this program is ACCRC-85.EXE and it cost $29.95
for a single licensed copy or $39.95 for a group licensed copy plus
$3.00 shipping and handling to the above address. NO C.O.D.'s.
The program comes with a ACC.DOC file to further explain all of the
features of the program along with some hint's and kink's to help you
along.
Sincerely,
Andrew J. Kadvan Jr.