home *** CD-ROM | disk | FTP | other *** search
/ DP Tool Club 19 / CD_ASCQ_19_010295.iso / vrac / sapph409.zip / HINTXX.STD < prev    next >
Text File  |  1994-08-27  |  3KB  |  82 lines

  1.  
  2. ;6
  3. ;FNC HDG
  4. -------------------------------
  5. TIPS AND TRICKS FOR THIS SYSTEM
  6. -------------------------------
  7. ;FNC FIL
  8.  
  9. NOTE:  This article gives some detailed information about this system.  It will
  10. enable you to do things faster and with less  effort.   However,  this  article
  11. does not cover techniques for composing messages.   If you want to  learn  more
  12. about that subject, please refer to the GIMMICKS article.
  13.  
  14. In any case ... here are a few pointers to help you use this system...
  15.  
  16.  
  17. ;7
  18. COMMAND COMPLETION
  19. ------------------    You don't have to type  the  whole  command.   Just  type
  20. enough  to  be  recognizable.    As  an example:  to use the READ command,  you
  21. only  have to type "R".
  22.  
  23. NOTE:  Sysop-level commands are evaluated last,  after the regular commands and
  24.        any door commands.
  25.  
  26.  
  27. ;8
  28. MESSAGES
  29. --------   Messages  and  time  on this system  are  identified  by a  DAY TIME
  30. combination.  For example, if you wrote a message at noon on day 1000, the mes-
  31. sage would be known as 1000 12:00.
  32.  
  33. By the way, the DAY value is the number of days since Jan. 1st, 1988.   We keep
  34. track of our messages this way  because it's a little more  meaningful  than an
  35. arbitrary "bulletin ID number".
  36.  
  37.  
  38. ;10
  39. READING TEXT
  40. ------------    You can halt the output of  messages  and  other text  (such as
  41. this article) by pressing either  CTL-S or the  P  key.  To re-start, press any
  42. key.
  43.  
  44. Whenever you're  reading,  you can also "gear-shift" the speed of the output by
  45. typing  a number.   0 is  "Top  Speed", while  1 to 9  give you speeds  between
  46. "Slow and Fast".
  47.  
  48. You can also  cancel output  altogether by  pressing  some other key.
  49.  
  50. When  reading  messages,  however,  the spacebar  has a  special function:   it
  51. will skip what you're reading, and jump to the  next message.   For informatory
  52. text (like this),  it will  cancel  the print-out.
  53.  
  54. In fact, ANY text  on  this system that runs on for a while can be skipped over
  55. with  the spacebar.   This includes the message you see when you first connect.
  56.  
  57.  
  58. ;10
  59. TEXT, NAMES & SET
  60. -----------------   These  powerful  commands enable you to  restrict  how much
  61. text you'll  get  when you  do a  READ. The NAMES command  can be used to limit
  62. the messages to  only those  that  were written by certain people.  TEXT can be
  63. used to  limit  the  messages  to  only those that contain certain text.  Using
  64. all the message selection commands, you can  greatly reduce the amount of read-
  65. ing you must do.  For example:
  66.  
  67. ;4
  68. ==> NAMES MARY/HARRY/JOHN
  69. ==> TEXT PIANO/PIZZA/HOT DOG/CABBAGE
  70. ==> SET 150 0
  71. ==> READ B
  72.  
  73. The above  commands,  if used together, result in the command, "Show me all the
  74. messages in the  Basic Membership base, in which Mary or Harry or John happened
  75. to mention,  since midnight of day 150, a piano, or several types of food."
  76.  
  77. In fact,  NAMES, TEXT and SET,  used in combination,  affect  many  of the com-
  78. mands that are available.
  79.  
  80. LEARN TO USE THEM.   They will give you an enormous amount of control  over the
  81. information you get from this system!
  82.