home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DP Tool Club 19
/
CD_ASCQ_19_010295.iso
/
vrac
/
autont30.zip
/
ADVANCED.CFG
next >
Wrap
Text File
|
1994-11-07
|
5KB
|
198 lines
; ┌──────────────────────────────────────────────────────────────┐
; │ AUTO-NET ADVANCED CONFIGURATION FILE │
; └──────────────────────────────────────────────────────────────┘
; If in doubt, do not use the advanced config
; It is designed for intermediate to advanced users
;
; Should Auto-Net use this file?
; If in doubt, do NOT use this file. The defaults should be
; sufficient for most users, but if you're having problems
; then definately tweak this file to suit your needs
NO = USE ADVANCED CONFIG
; Do you want to create backup files?
; When starting, Auto-Net creates backups of its regular files
; Ie: Log files, agenda.1, configuration and signature data...
YES = BACK UP FILES
; Toggle DTR on hangup?
; When Auto-Net hangs up, do you want to toggle the Data-Ready
; before sending hangup string?
YES = TOGGLE DTR
; Flush the cache on exit?
; When Auto-Net quits, it flushes any cache you have to
; ensure the files are saved properly.
; NOTE: NOT AVAILABLE UNTIL NEXT VERSION
;YES = FLUSH CACHE
; Number of seconds between dial attempts?
; How many seconds should Auto-Net wait before it tries to redial?
2 = SECONDS BETWEEN DIAL ATTEMPTS
; Log file type?
; Auto-Net can keep two types of log files:
; VERBOSE
; SHORT
; Verbose will record everything that happens, but Short will only
; record major events of your agenda...
VERBOSE = LOG FILE TYPE
; Should we overwrite or append your files?
; When Autonet's starts up, should it append the current log to
; your log file, or just over-write the old information?
; Values are: OVERWRITE
; APPEND
;
; NOTE: This affects both AUTONET.LOG and ERROR.LOG
OVERWRITE = OVER/APP LOG FILES
; Use sound effects?
; Auto-Net ain't noisy, but it DOES make a phone-ring sound
; when it remains online/at site/ or pages you.
; WARNING: Answering 'NO' disables all user pages!
YES = USE SOUNDS
; What if the phone rings?
; If Auto-Net is trying to dial out, and the phone rings, you have
; the following options of what to do:
; HANGUP - picks up the phone, then hangs up rudely
; NONE - do nothing
; PAGE ME - sound an alarm, and do nothing
NONE = ACTION ON RING
; Use the status window?
; The bottom window of Auto-Net gives you the current status
; and results of each step. By default, it is turned on.
YES = STATUS WINDOW
; Additional Info?
; When done, Auto-Net displays final information about the agenda
; that it ran. Do you want this extra info displayed?
YES = ADDITIONAL INFO
; Handshake method?
; What method do you want Auto-Net to perform for handshaking with
; the Internet provider's modem? Options are:
; RTS
; DTR
; CD
RTS = HANDSHAKE METHOD
; Check receive errors?
; When receive errors occur over the modem, should Auto-Net inform
; you about them? (if NO, Auto-Net will simply correct them automatically)
YES = CHECK RECEIVE ERRORS
; Use defined sites?
; Auto-Net allows you to define your login name, password, timeout
; value, hammering times, and more when FTP'ing to other sites.
; If you want "customized logins" for your favorite sites, then
; answer YES, otherwise, leave it at NO
NO = USE DEFINED SITES
; Hang up string
; When Auto-Net hangs up the phone, it sends the string: +++ATH0
; to disconnect. If you want a different hang up string, specify
; that here.
+++ATH0 = HANG UP STRING
; How many times should Auto-Net "hammer" a site?
; Normally Auto-Net hammers a busy site only 30 times. You can
; adjust that value here.
30 = HAMMER RETRIES
; Should we hammer if a weird message?
; Auto-Net hammers a site only if it gets a "login failed" message after
; doing a "anonymous". Sometimes the site may give a "unreachable" or
; "timed out" message if doing maintenance. If set to YES, Auto-Net
; will retry when it gets those messages.
NO = HAMMER IF UNREACHABLE/TIMED OUT
; When starting up, check for valid COM port?
; By default, AutoNet checks to ensure the COM port you specified
; was valid. If not, it exists with an error.
YES = CHECK COM PORT
; Quit site when bad transfer?
; Upon having a bad file transfer (timing out), AutoNet assumes
; the site is VERY hosed down. It therefore logs off.
; Set this to NO if you want AutoNet to continue trying other files.
YES = BAD TRANSFER KILLS SITE
; Send "bye" before ftp sites?
; Usually, AutoNet only sends a "bye" command to log off a site.
; This will force AutoNet to send a bye command always before
; trying any ftp site.
NO = FORCE BYE COMMAND