home *** CD-ROM | disk | FTP | other *** search
/ DP Tool Club 19 / CD_ASCQ_19_010295.iso / vrac / ac311.zip / ACS.HLP (.txt) < prev    next >
Microsoft Windows Help File Content  |  1994-11-20  |  14KB  |  373 lines

  1. :Defining Archivers
  2.                    
  3. Defining Archivers
  4.                     
  5.  Choosing this option allows you to define new archivers,
  6.  edit existing archivers, and delete archivers.  When you
  7.  select this option, a list of the currently defined
  8.  archivers will be displayed.  At this point the following
  9.  options are available:
  10.                
  11. <INS>
  12.    - Define new archiver.
  13.                
  14. <DEL>
  15.    - Delete selected archiver.
  16.                
  17. <ENTER>
  18.  - Edit selected archiver.
  19. Tips:
  20.   - The easiest way to define a new archive would be to
  21.     print out the command line help for the archiver first.
  22.     For example type:'ARJ -? >lpt1' for ARJ.  Then you can
  23.     look up the information you will need as you fill in
  24.     the dialog box.  Also, try testing out your selections
  25.     by creating some test archives.  This way you can be sure
  26.     that AC will operate properly when you convert to/from
  27.     the new archive.
  28. :Defining DeArchivers
  29.             
  30. Defining DeArchivers
  31.              
  32.    Choosing this option allows you to define
  33.    new dearchivers, edit existing ones, and
  34.    delete dearchivers.  When you select this
  35.    option, a list of the currently defined
  36.    dearchivers will be displayed.  At this point
  37.    the following options are available:
  38. <INS>
  39.    - Define new dearchiver.
  40. <DEL>
  41.    - Delete selected dearchiver.
  42. <ENTER>
  43.  - Edit selected dearchiver.
  44. :Registration
  45.                   
  46. Registration
  47.                    
  48.    This option allows you enter the registration
  49.  number you recieve when you license AC.  Simply
  50.  enter the number and press <ENTER>.  From this
  51.  point on, AC and ACS will be fully functional.
  52. :Defaults
  53.                    
  54. Defaults
  55.                     
  56.      <<<<Registered Users Only>>>
  57.    This option allows you change the defaults
  58.  for AC.  Most defaults are toggles, either ON
  59.  or OFF.  Registered users of this program can
  60.  modify these toggles to customize how they
  61.  would like AC to operate by default.  If you
  62.  modify these toggles, you should remember that
  63.  command line options that modify these defaults
  64.  TOGGLE the value.  What this means is that if you
  65.  set recursion to ON, and you include the
  66.  recursion option in the command line, it will
  67.  actually turn recursion OFF.
  68. :Defaults...Archive
  69. Default Archive
  70.  This tells AC what archive to convert to by default.
  71.  The available archives are those that are defined as
  72.  archivers.
  73. :Defaults...Recursion
  74.           
  75. Recursion
  76.            
  77.  Recursion means to support sub directories
  78.  inside of archive files.  When this switch
  79.  is on, AC will automatically recursively
  80.  convert archive files.
  81. NOTE:
  82.   If this switch is ON, and you
  83.       convert a recursive archive to
  84.       an archive that does not support
  85.       recursion, you WILL lose data!
  86. :Defaults...Timestamp
  87.           
  88. TimeStamp
  89.            
  90.     Timestamping means that when an archive
  91.     is converted, it will use the most recent
  92.     date of the file dates INSIDE the archive.
  93.     Not all archivers support this feature,
  94.     and if not, this toggle will simply be
  95.     ignored.
  96. :Defaults...Keep
  97.            
  98.  When Keep is ON, AC will NOT delete the
  99.  original archive.  It will retain the old
  100.  archive and create the new one, leaving
  101.  you with 2 archives.
  102. :Defaults...Scan
  103.  When Scan is ON, AC will scan archives
  104.  for viruses during conversion.  The
  105.  method would be to extract, scan,
  106.  clean if virus found, compress.
  107. :Defaults...Logg
  108.            
  109.             
  110.  When Logg is ON, AC will write information
  111.  to a text file for each file converted.
  112.  See AC.DOC for specific information on the
  113.  format.
  114. :Defaults...Update
  115. Update
  116.            
  117.  When Updating is ON, AC will properly
  118.  convert archives of the same type.  If
  119.  you wish to update an archive to a newer
  120.  version, you must set this switch to ON.
  121.  It is NOT recommended to set this switch
  122.  to ON by default, rather to turn it on
  123.  only when needed, since you will probably
  124.  only update archives intermittently, and
  125.  it alters the way AC converts archives.
  126. :Defaults...Sound
  127. SOUND
  128.  When Sound is ON, AC will make a short beep
  129.  whenever a window is opened or closed.
  130. :Defaults...Explode
  131. EXPLODE
  132.            
  133.   When Exploding is ON, all windows in AC
  134.   will explode when opened, and implode when
  135.   closed.  When this feauture is off, windows
  136.   will appear immediatly.
  137. :Defaults...Nest
  138.              
  139.               
  140.  When you set nesting to ON, AC will automatically
  141.  convert any archives it finds inside the main
  142.  archive you are converting.  When Nesting is OFF,
  143.  AC will treat any archives found inside the
  144.  archive as an ordinary file.
  145. NOTE:
  146.  You should use this option with care.
  147.      If you convert nested archives in
  148.      an archive, and the program that is
  149.      contained in the archive has an
  150.      installation routine that expects to find
  151.      archives of a specific type, you may
  152.      be forced to manually install the program
  153.      or to re-convert the archives back to
  154.      their original format.
  155. :Defaults...Video
  156.                     
  157. Video
  158.                      
  159.  This option allows you to set the default
  160.  video mode when running AC in UI mode.
  161.  The available options are: AUTO,25,28,43,
  162.  and 50.  AUTO would use whatever video
  163.  mode was set when you start AC.  25,28,43
  164.  and 50 will cause AC to start up with the
  165.  appropriate number of lines no matter what
  166.  mode was set before.  AC always restore the
  167.  video mode to what it was before execution.
  168.  Command Line mode will ALWAYS be set to AUTO.
  169.  If you want to have 50 lines in command line
  170.  mode, you must set that mode manually before
  171.  running AC.
  172. :Creating a new Database
  173. Creating a new Database
  174.  This option will create a new database in
  175.  the event that the file AC.DB becomes damaged
  176.  or is deleted.  If possible, you should retrieve
  177.  the database that came with AC, because this
  178.  option will ONLY create a database with 1
  179.  archiver and 1 dearchiver defined.  You will
  180.  have to enter all the other archivers manually.
  181. :Archive Executable
  182.         
  183. Archive Executable
  184.          
  185.  This would be the name of the DOS program
  186.  that would create an archiver.  Be sure to
  187.  add the extension at the end (IE .EXE).
  188.  When you finish entering all information in
  189.  the dialog box, and press <F10> to save it,
  190.  ACS will check to see if the archive executable
  191.  can be found in your DOS path.  If it cannot
  192.  locate it, you will be warned that it was not
  193.  found, and asked if you would like to add the
  194.  archive definition anyway.
  195. :DeArchive Executable
  196. De-Archive Executable
  197.         
  198.  This would be the name of the DOS program
  199.  that would extract an archiver.  Be sure to
  200.  add the extension at the end (IE .EXE).
  201.  When you finish entering all information in
  202.  the dialog box, and press <F10> to save it,
  203.  ACS will check to see if the dearchive executable
  204.  can be found in your DOS path.  If it cannot
  205.  locate it, you will be warned that it was not
  206.  found, and asked if you would like to add the
  207.  dearchive definition anyway.
  208. :Archive Extension
  209. Archive Extension
  210.  The purpose of the archive extension is to tell AC
  211.  what extension to use when creating an archive.
  212.  The extension can be anything that you like, just
  213.  keep in mind that whatever you enter will be the
  214.  extension of any archive files converted.
  215. Hint:
  216.   To create two different archive definitions
  217.     that use the same archive program, simply
  218.     use different extensions.  For example
  219.     PKZIP will normally use .ZIP extensions, however
  220.     ZIP files that have a verification number will
  221.     often have extensions of .SDF, even though they
  222.     are still ZIP files.
  223. :DeArchive Extension
  224.            
  225. DeArchive Extension
  226.  The purpose of the dearchive extension is to tell AC
  227.  what extensions to search for when it displays file
  228.  lists in UI mode, and what extensions to search for
  229.  when you specify a wildcard conversion on the command
  230.  line.
  231. :Archive Switch
  232.            
  233. Archive Switch
  234.             
  235.  Archive switches would be any commands that you
  236.  would normally type on the command line to alter
  237.  the operation of an archive program.  Often times
  238.  archivers have at least 1 command line switch that
  239.  is necessary to create an archive.  You should NOT
  240.  combine separate archive switches in the same edit
  241.  box.  You may enter up to 4 separate archive switches.
  242. :DeArchive Switch
  243.            
  244. DeArchive Switch
  245.             
  246.  De-Archive switches would be any commands that you
  247.  would normally type on the command line to alter
  248.  the operation of a dearchive program.  Often times
  249.  dearchivers have at least 1 command line switch that
  250.  is necessary to extract an archive.  You should NOT
  251.  combine separate dearchive switches in the same edit
  252.  box.  You may enter up to 4 separate dearchive switches.
  253. :Archive Command Line Switch
  254.           
  255. Archive Command Line Switch
  256.            
  257.  You must define what command line switch you would
  258.  like to use for an archiver that you wish to define.
  259.  There are 31 possible switches that can be used when
  260.  no archivers have been defined.  You cannot define the
  261.  same switch more than once.
  262. :Archive Recursive Switch
  263.           
  264. Archive Recursive Switch
  265.            
  266.  Archive recursive switches are switches that would
  267.  tell the archiver to support recursion, or nested
  268.  directories.  As with normal switches, if an archiver
  269.  requires more than one switch to support recursion,
  270.  you should enter each switch in the four available
  271.  recursive switch fields.
  272. :DeArchive Recursive Switch
  273.          
  274. DeArchive Recursive Switch
  275.           
  276.  De-Archive recursive switches are switches that would
  277.  tell the archiver to support recursion, or nested
  278.  directories.  As with normal switches, if a dearchiver
  279.  requires more than one switch to support recursion,
  280.  you should enter each switch in the four available
  281.  recursive switch fields.
  282. NOTE:
  283.   - Unlike defining Archivers, that simply append the
  284.     recursive switch to the normal switches, De-Archivers
  285.     do NOT.  Dearchivers will either use the normal
  286.     switches or the recursive switches, depending upon
  287.     wether recursion is set to on.  If an archiver does
  288.     NOT support recursion, then you may want to duplicate
  289.     the normal switches in the recursive switches.  This
  290.     way AC will still convert the archive even if it
  291.     does not support recursion.
  292. :Archive Timestamp Switch
  293.                
  294. Archive Timestamp Switch
  295.                 
  296.  Archive Timestamping when enabled in AC will cause
  297.  the archive program to make the archive file date
  298.  and time to match the most recent file date and time
  299.  of the most recent file in the archive.  If this option
  300.  is not enabled, then the current system time and date
  301.  would be used for the archive file.
  302.  Some archivers do not support this feature, and if they
  303.  do not, simply leave this field blank.
  304. :Archive Separator
  305.            
  306. Separator
  307.             
  308.  This field tells AC how to separate each command
  309.  line switch.  Most archivers expect a space between
  310.  each switch, but some do not.  The two available
  311.  options are 0 - SPACE, and 1 - NONE.  You should
  312.  normally want 0 - SPACE, but may need to set this
  313.  to no spaces as is the case with ZOO.EXE
  314. :DeArchive Separator
  315.            
  316. Separator
  317.             
  318.  This field tells AC how to separate each command
  319.  line switch.  Most archivers expect a space between
  320.  each switch, but some do not.  The two available
  321.  options are 0 - SPACE, and 1 - NONE.  You should
  322.  normally want 0 - SPACE, but may need to set this
  323.  to no spaces as is the case with ZOO.EXE
  324. :Selecting Colors
  325.                   
  326. Selecting Colors
  327.                    
  328.  When you select an item whose color you would like
  329.  to change, you are presented with a color box that
  330.  displays all the possible color combinations.  The
  331.  current setting will initially be shown.  To move
  332.  the cursor, just use the 4 arrow keys.  To make a
  333.  selection, press 
  334. <ENTER>
  335. .  To cancel, and keep the
  336.  original setting intact, press the 
  337. <ESC>
  338.  key.
  339.  Note:  If you modify the color pallettes, ACS will
  340.     temporarily change the pallette to reflect
  341.     your current pallette if different from the
  342.     default.  
  343.                    
  344. :Selecting Pallettes
  345.                  
  346. Selecting the Pallette
  347.                  
  348.  The color pallette allows for only 16 different colors
  349.  on the screen at any one time.  However, there are many 
  350.  more colors available than the standard 16.  AC allows
  351.  you to change the pallette color for any of the 16 default
  352.  colors.  To change the pallette select the following:
  353.  'AC Colors... | Custom Pallette | <color>'
  354. Note:
  355.  If you make a lot of changes to the pallette and want
  356.        to restore the pallette to the defaults, select the
  357.        default program colors and the pallette will also be
  358.        restored.
  359. :Selecting Background
  360.                   
  361. Selecting the Background
  362.                   
  363.  To change the background character, select the following:
  364.  'AC Colors... | Custom Colors | Background Character'.
  365.  A box will appear showing 20 characters at a time, use
  366.  the left and right arrow keys to select the character you
  367.  wish to use for the background.  Press the 
  368. <RETURN>
  369.  key to
  370.  make your selection, and the 
  371. <ESC>
  372.  to cancel.
  373.