DP Tool Club 15/CD_ASCQ_15_070894.iso/vrac_os2/inimt30m.zip/INICHNGE.TXT

Text File | 1994-05-19 | 138KB | 2,786 lines

                      INIMAINT CHANGE HISTORY

******************************* V1.0a *******************************

The items fixed in Version 1.0a are:

1. There was a potential problem in 1.0 if a new file was selected
before the data for a key was written to the file. This turned out to
not be a problem.

2. If INIMAINT was closed in a minimized condition, the correct
window size and location were not stored. This has been fixed.

3. The SIZE calculation for All Groups was incorrect if a single
Application was included in more than one Group. This has been fixed.

4. If the Help Instance could not be created because the INIHELP.HLP
file was not found, the user only got a 5101 logic error. The Dump
Dialog has been changed to add a line that gives the reason for any
outstanding logic error.

5. The PM Error Text was not displayed when there was a PM Error.
OS/2 1.3 with CSD WR5050 has a bug in this area and will not display
the correct text. The text will now be displayed.

6. When an error was encountered during Help Instance Initialization,
the help error code was not stored in the Help Error area. This has
now been fixed.

7. INIMAINT would not run at all if there was a problem initializing
the Help. It will now run, but no Help will be available.

******************************* V1.0b *******************************

The items fixed in Version 1.0b are:

1. More of the Help has been done, the missing Help is now that for
the Dialog Boxes.

2. When run under OS/2 2.0 a Message Queue Full error was being
encountered. This was fixed by increasing the Message Queue from the
default 10 to 30.

******************************* V1.0c *******************************

The items fixed in Version 1.0c are:

1. A Dump message logging facility was added so that problems with
message sequences could be logged and identified.

2. Because of a problem in OS/2 2.0 the return from setting the top
index in a listbox is incorrect. The check for a valid return from
this API call has been removed so that INIMAINT will run under OS/2
2.0.

******************************* V1.0d *******************************

The items fixed in Version 1.0d are:

1. When INIMAINT first comes up, the LOGO box does not have the Focus
and the Enter Key will not close it, it can only be closed using the
Mouse. The Focus is not forced to the LOGO Dialog during initial
window processing.

2. The Dump Dialog will not fit on a 640x480 VGA Screen. To fix this
the Dump dialog was made 20 pels shorter.

3. The filling of the Listboxes, the MLE and the Size calculation all
have the capability to run for some time, especially under OS/2 2.0,
and they block any processing of messages during this period. These
functions have been moved to a separate thread.

4. Choosing Menu Items such as Size, Copy and Move cause a Dialog box
to appear with the selections. The Selections are now a menu, not a
dialog.

5. If there is a lot of data to be inserted into the MLE, the MLE
blinks a lot. The window is now be disabled during the data insertion.

6. If Size is selected and then Cancelled, a Size of 20 bytes was
displayed. This has been fixed.

7. The buttons in the New File Dialog were in uppercase, but now are
lower case.

8. If a New File is selected on a diskette drive that has no
diskette, a terminal error resulted. Now a Message Box will be
presented and the old drive will remain the current drive.

9. Selecting an empty VDISK drive got a terminal error. This has been
fixed.

10. You could not Cancel a Copy without selecting a target file. This
has been fixed.

11. When the contents of the Dump Dialog were written to a file, the
values of the various error indicators, which are displayed at the
top of the Dialog, were not written. This has been fixed.

12. If a non-INI file is selected and it causes INIMAINT to
terminate, then the program would not restart, because it attempted to
use the same file and continued to get the same error. The user is
now informed the file is invalid and given a chance to select a new
file to edit.

13. When opening a new INI file to edit, the check for a valid INI
file was not sufficient to identify the bad file during the file
selection process. This has not been fixed and any file that gets
through the file selection will be a valid INI file.

14. If a Drive was selected and the root directory was empty,
INIMAINT would terminate attempting to fill the file Listbox. This
has now been fixed.

15. When editing the any line of a multiline entry in the Key
Value MLE while in overtype mode, as opposed to insert mode,
the following line had the initial characters deleted. This has been
fixed.

16. When the Focus was removed from the INIMAINT window, the
Titlebars of both Listboxes stayed in a highlighted condition. This
has been fixed and the colors of the Titlebars will now behave
correctly.

17. Since no user input is accepted while the Listboxes are being
filled, the MLE is being reset, a Size is being calculated or a Move
or Copy are in progress, the Pointer should be changed to an
hourglass pointer, this was not working, but has been fixed.

18. The Help has been finished.

19. There was a problem with seeing the pointer in the MLE under OS/2
2.0, so a call to WinSetOwner setting the Main Client window as the
Owner of the MLE was added to fix the problem.

******************************* V1.0e *******************************

The items fixed in Version 1.0e are:

1. Copy an Entire File got a return of 10 from the Copy program. This
has been fixed.

2. The MOVE/COPY in Progress Dialog did not display the word
Move/Copy. This has been fixed.

3. The MOVE/COPY did not verify that the target file was a valid INI
file. This will now be done and an Error Message box will be
displayed if the COPY/MOVE cannot be done.

4. The smallest item that could be MOVEed or COPYed was an
Application. It is now possible to COPY/MOVE an individual key.

5. Considerably more Help has been added.

6. Accelerator Keys have been implemented and added to the Help.

7. If a New File was selected and either the OS2.INI or OS2SYS.INI
files were specified without the initial path information, INIMAINT
did not recognize them as the User and System INI files and attempted
to open them in an incorrect manner. This has been fixed.

8. If a COPY/MOVE was attempted and either the OS2.INI or OS2SYS.INI
files were specified as the target without the initial path
information, INIMAINT did not recognize them as the User and System
INI files and attempted to open them in an incorrect manner. This has
been fixed.

9. If an INI file was selected that had no Applications in it, the
INIMAINT window would not appear. This has been fixed.

10. It was not possible to cancel the Add Application or Add Key
without getting the Message Box saying that something had to be
entered. The Cancel will now work correctly.

11. The Listboxes and MLE would flash excessively. This will no
longer occur.

12. When in the Dump Dialog, it was not possible to change the name
of the Dump File by simply typing in the Filename Entry Field. This
will now work and the new filename will become the Dump File for
future Dumps.

13. When the Help was open, the Title Bars of the smaller INIMAINT
windows appeared to still have the focus because they were
highlighted. This will no longer occur.

14. When in the Replace Key Dialog and the key value was longer than
what could be displayed in the Listbox, any change to the value would
cause the contents of the ASCII and Hex Entry Fields would shift to
the very end of the value data. This has been fixed.

15. INIMAINT was not using the Logo Display Time that is set by the
user in the Control Panel, but was using an internal 10 second
display time. This has been changed so that the Control Panel value
will now be used. Even with a value specified in the Control Panel,
it is still possible to turn off the Initial Logo Display with the
Options Dialog.

******************************* V1.0f *******************************

The items fixed in Version 1.0f are:

1. The Menus did not show the Accelerator Keys, this information has
been added to the appropriate menu items.

2. Because of a bug in handling Timers, INIMAINT would get an error
when run under OS/2 2.0 and the About Dialog was dismissed. This has
been fixed by changing the Parent of the About box when it is invoked
from the Menu.

3. The Help indicated that there was an Accelerator key that would
directly pull down the COPY or MOVE menus. This was an error and has
been removed from the Help file.

4. When a COPY/MOVE was attempted for the Selected Application or
Selected Key and either of the Selected Names had an embedded blank,
then the COPY?MOVE would terminate with an Error=5 from the INICOPY
program. This has been fixed.

5. The Error Message Box displayed when an invalid INI file was
selected did not include the error message, this has been fixed.

6. When an invalid INI file was selected, INIMAINT would not close
the file, therefore, no other process could use the file. This has
been fixed.

******************************* V1.0g *******************************

The items fixed in Version 1.0g are:

1. The Dump to a file could get a Trap D and could dump some garbage
messages because it was going past the end of the Message table. This
has been fixed.

2. A message sequence number has been added to the dump of messages.

3. When doing a MOVE/COPY the Wait Pointer was not set correctly when
the pointer was over the Listboxes or MLE. This has been fixed.

4. If a Group was deleted, a hole was left in the menu items that
include the Groups. This has been fixed.

5. When things were MOVEd from an INI file to another file, the
Listboxes were not updated to reflect the fact that the MOVEd items
were no longer in the Source INI file. This has been fixed and the
Listboxes will be automatically updated after the MOVE.

6. The supplemental error text was not always complete if an error
occurred during a MOVE/COPY operation. This has been fixed.

7. V1.0f displayed a Version number of 1.0e. V1.0g will show the
correct version.

8. When the last Key for an Application was moved to another INI
file, the Application entry was not deleted and an Application with
no Keys was left in the file. INIMAINT will now check to see if a
MOVE Key is being done for the last Key and promote it to a MOVE
Application, so that the Application entry will be removed from the
Source INI file.

9. The Groups Dialog did not redisplay the Group that was being
displayed when the last Group Update was done. This has been fixed.

******************************* V1.1  *******************************

The items fixed in Version 1.1 are:

1. The System Default Accelerator keys did not work because the
System Commands were not getting to the Main Window Frame. This has
been fixed.

2. The Registration code was added.

3. When an input string was requested, the user was asked to 'Select'
something. This has been changed to ask the user to 'Enter' the
information.

******************************* V1.1a  *******************************

The items fixed in Version 1.1a are:

1. The supplemental error text was not correctly filled in when there
was an error during a COPY/MOVE. This has been fixed.

2. It was possible to get a Trap D when selecting a New INI File
because dynamic memory was released prematurely. This has been fixed.

******************************* V1.1b  *******************************

The items fixed in Version 1.1b are:

1. It was possible to get a Trap D while the MLE was formatting a
long entry if an attempt was made to make a selection in one of the
Listboxes or an attempt was made to change the MLE. Now any such
attempt will cause an error tone and the action will be rejected
until all updating has been done.

2. There were some relatively rare situations where dynamic memory
blocks were not being freed, the that amount of memory used would
slowly grow. This has been fixed.

3. In order to better track potential memory problems, a dump of the
contents of the heap has been added to the Dump window and more
complete listing will be written to the Dump File.

4. Under certain circumstances, INIMAINT would put Keys in the
OS2.INI file for the INI File Maintenance Application that had NULL
Values. This will no longer occur, although it did not cause any
problem other than put unneeded items in the INI file.

5. There are certain Applications and/or Keys that cannot be deleted
from the OS2SYS.INI file. When an attempt was made to Delete or MOVE
one of these entries, INIMAINT would terminate. Additional code has
been inserted that will identify these conditions, inform the user
and then continue.

6. Under OS/2 2.0 INIMAINT would terminate with an error 109 after
the About INIMAINT Dialog box was displayed. This was caused by
static variables that were not correctly initialized after the first
use of the dialog. This has been fixed.

7. The Spooler, and perhaps other sections of OS/2 protect certain
areas of the INI files, especially the System INI file, thus making
it impossible to remove certain Keys from the files, even though the
Keys are associated with things that are no longer on the Desktop. In
order to facilitate these efforts, a new capability has been added to
INIMAINT that allows the user to change the User and/or System INI
files to a different file. The user can then edit the original file
as he wishes and then switch back. This must be done with much care
in order to avoid causing a system problem, but the capability can be
extremely important when attempting to recover from conditions where
the operating system has created conflicting or other conditions that
can be corrected no other way.

******************************* V1.1c  *******************************

The items fixed in Version 1.1c are:

1. The Main Window Menu Items for changing the User and System INI
files have been moved from the Actions Menu to a new Menu, Recover.
It is intended that additional capabilities will be added to give the
user the ability to recover from corrupted INI files and those
capabilities will be added to this menu. In addition, the Actions
Menu was getting crowded.

2. Two new items have been added to the Action Menu. Rename Key will
change the name of an existing Key and Duplicate Key will make a
duplicate copy of a Key Value using a different Key Name.

******************************* V1.1d  *******************************

The items fixed in Version 1.1d are:

1. The New File and Exit Menus have been combined into a single Menu
called File. This was done for two reasons, first, the number of menu
items was becoming too large and, second, a new file type function
was added, see below.

2. Since there are a number of different conditions that could modify
an INI file that is currently being viewed using INIMAINT, the
ability to reload an INI file from disk has been added. It is the
Refresh selection on the File Menu.

3. There was an error in Error Message 13 in the INICOPY program.

4. It was not possible to select a Application/Key pair when the Key
Value was zero length i.e.., there was no Value, only the Application
and Key Names. This has been fixed.

5. It was not possible to COPY/MOVE and INI file that had an
Application/Key pair with a zero length Key Value. This has been
fixed.

6. When Adding or Replacing a Key Value, the ability to specify that
a zero termination character is to be added to the Key Value can now
be indicated with a Checkbox.

7. The most common files that INIMAINT is asked to display are the
User and System INI files. In order to make it easy to select these
files, two new entries have been added to the File Menu that allow
for direct selection of these two files without having to use the
file selection dialog.

8. Some of the dialog procedures did not initialize static data
causing a new use of the same dialog to behave in unexpected ways.
This has been fixed.

9. A new item has been added to the Options that gives users the
ability to have the Application and Key Listboxes loaded in the same
sequence as the actual INI file as opposed to alpha sequence.

******************************* V1.1e  *******************************

The items fixed in Version 1.1e are:

1. When the menu item was used to switch to the User or System INI
files, the new file information was not saved. The effect of this was
that the next time INIMAINT was run, it would go back to the previous
INI file. This has been fixed.

2. INIMAINT can now be started with a Command Line parameter
specifying the initial INI file for this execution of INIMAINT. This
not only allows INIMAINT to be run with a parameter, but also allows
for it to be run by double clicking on an INI file, if the
association has been set up, and allows for running INIMAINT by
dropping an INI file on the ICON on the Desktop.

3. For versions of OS/2 prior to 2.0, there is no provision for
setting up file associations. Therefore a new item has been added to
the FILE Menu that will set up an association between INIMAINT and
all files whose file extensions are INI. This option will not appear
on the menu if the version is 2.0 or higher.

4. There are some key values which are very long, therefore, they
take a long time to load into the MLE. It is often the case that the
user does not even want to see the key value and would prefer to
switch to another key name. However, it was necessary to wait until
the MLE was filled and then wait again until all of the lines were
removed from the MLE. It is now possible to terminate the loading of
the key value lines into the MLE by hitting the ESC key while the MLE
is loading. The current Application and Key names will still be
highlighted, but the MLE will be empty.

5. In order to keep the menu line from becoming too crowded, the Dump
menu item has been moved to the File submenu. This was an item that
is not frequently used anyway. This makes room for the item below.

6. A new menu item has been added to the main menu, Find. This
submenu will allow searching of either of the listboxes, the key
value MLE, all the key names in the current file, all of the key
values for the current application or all of the key values in the
current file for either an Ascii or Hex value.

7. It was possible to select a new item in the Application or Key
Listboxes while the boxes were being filled. This would cause a
Protection Violation and has now been fixed.

8. When certain errors were encountered during the loading of the
Listboxes or the MLE, they were not reported, this has been fixed.

9. If the Value of a Key is larger than 65,500 characters, selecting
that Key in the Key Listbox would cause a memory allocation error and
the INI file with the Key Value could not be MOVEd, COPYed or used as
the target of a FIND search. All of these have been fixed. However,
only the first 60,000 characters of the Key Value will be displayed
in the Key Value MLE.

10. If INIMAINT was started with an INI file where the first Key
Value of the first Application was very large, it was not possible to
terminate the loading of the Key Value MLE because the main window
was not visible. This has been fixed by making the main window
visible before the initial loading of the Key Value MLE.

11. A new feature, Compare, has been added to the File menu. This
item will allow the user to compare two INI files on any one of three
different levels, write or print a listing of the differences and
write an INI file that contains only those Applications and/or Keys
where there are differences.

******************************* V1.1f  *******************************

The items fixed in Version 1.1f are:

1. When an attempt to set an association with the INI files was
attempted under OS/2 1.3, the association was set up, but INIMAINT
would then abend with a protection exception. This has been fixed.

2. When INIMAINT asked the user to enter any character string
variable, there was no warning when the entered string was too long.
This has been fixed and the user will hear a beep if they attempt to
enter a string that exceeds the maximum length for the requested
item.

3. It was possible to enter a Group Name that was longer than 30
characters, which is the maximum. This would appear to work
correctly, but subsequent attempts to use INIMAINT on the INI file
involved would cause a protection exception.

4. The filling of the window that holds the Key values, an OS/2 MLE,
was very slow if the key value length exceeded 1,000 or so
characters. If the value approached 64k, then time needed was several
minutes, even on a fast machine. The loading has been changed and 64K
can be loaded into the window in less than 10 seconds on the test
machine, which is a 25mhz 486. However, there does not seem to be any
way to clear a long key value from the window in less than
approximately 45 seconds on the test machine. Several different
approaches have been tried, but none of them resulted in a lower
time. Therefore, it takes longer to clear the key value window than
it takes to fill it. If the 45 seconds becomes a problem, hitting F3
will immediately terminate INIMAINT, which can then be restarted.
However, it is hard to see how this could be done in less than 45
seconds on a regular basis.

5. A Repair feature is being worked on and is in the On-line Help.
However, there are still some problems with the code that compares
the INI file entries to the actual contents of the desktop. This
feature will be implemented in the next release. If the item is
selected from the menu, the dialog box will appear and will be fully
functional, except that the Execute Button will not work. Choosing
Execute will result in a Message Box saying that the Execute has not
been implemented in this release.

6. At least one user has a need to move a Key from one Application to
another. The Duplicate Key item on the Action Menu has been modified
so that the user will now be prompted for a New Application Name as
well as a New Key Name. One of these names must be modified and the
Key Value will be copied using the modified names. If just the
Application Name is changed, then this has the effect of copying the
Key Name and Value to the new Application. The information will
remain using the old Application and Key Names unless specifically
deleted by the user.
Where there are differences.

******************************* V1.1g  *******************************

The items fixed in Version 1.1g are:

1. The clearing of the Key Value window could take a considerable
amount of time when the key value was larger than a few thousand
characters. This has been fixed by changing the code from sending a
message to delete the contents of the window to simply destroying the
window and recreating it.

2. Hitting F10 did not cause a refresh of the file, because the
System uses F10 to highlight the first menu item. The Refresh was
changed to F4.

3. The address and phone number for Carry Associates was changed in
the documentation files, but was not changed in the About Dialog or
in the on-line Help. This has been fixed.

4. A new item has been added to the Action Menu, Duplicate
Application, which will make a duplicate copy of any Application in
the same INI file using a different Application Name.

5. When a Key was Duplicated in an INI file and the copy was put in
an Application that did not previously exist, the Application Listbox
was not refreshed. This has been fixed.

******************************* V1.1h  *******************************

The items fixed in Version 1.1h are:

1. A Rename Application item has been added to the Action Menu.
This is the same as the Duplicate Application except that the old
Application is deleted.

******************************* V1.1i  *******************************

The items fixed in Version 1.1i are:

1. The Control Program Error indicator could be reset in an error
situation before the Dump Dialog was displayed, thus losing this
information. This has been fixed by saving the contents of this
variable at the point that the initial error occurred.

2. The found flag was not always reset when multiple Find's were
requested. The result of this was an indication that a target was
found when it really was not. This has been fixed by resetting the
found flag at the start of each find cycle.

3. A new item has been added to the Recover Menu, Repair INI file.
Refer to the INIREP.TXT file for a detailed description of the
currently available repair actions and the on-line help for how to use
the facility. Initially, the only repair action that is available is
to remove entries from any INI file that reference files which are
not present on the desktop.

4. The Print function in the Compare and Repair Dialog boxes did not
correctly print lines that were longer that the current page, the
line would be truncated rather than carried over to the next line.
This has been fixed.

5. When certain errors occurred, for example during a repair action
or a file compare, the error was not reported via the Dump Dialog and
INIMAINT would simply stop processing messages. This has been fixed
by insuring that the various work threads correctly return any error
indication to the controlling dialog and that the dialog procedure
terminates the dialog when the error is seen.

******************************* V1.1j  *******************************

The items fixed in Version 1.1j are:

1. A new item, Condense, has been added to the Repair Menu. This item
will condense the empty space out of the Current, System, User or
both System and User INI files with a single selection. INIMAINT has
had this capability for some time, but it required a number of
different selections to accomplish.

2. The menu item to change both the System and User INI files only
changed the User INI file. This has been fixed.

3. An item has been added to the on-line help to describe what is
meant be the System and User INI files.

4. The Size submenu has been expanded to add the ability to calculate
a Size for the System INI File or User INI File without having to
make one of these files the current INI file.

5. The Copy submenu has been expanded to add the ability to make a
Copy of the System INI File, the User INI File or both the System and
User INI files without having to make these files the current INI
file.

******************************* V1.1k  *******************************

The items fixed in Version 1.1k are:

1. A new submenu has been added to the Actions menu, Backup. This
allows the user to make a backup copy of the System INI File, the
User INI File or both the System and User INI Files. This item
differs from the Copy item in two respects. First, in order for a
Copy to be a true backup, the target file must not exist. With Copy,
it was necessary for the user to insure that this was the case. The
Backup menu item will automatically erase the file if it already
exists. Second, each time a copy was done, it was necessary to
specify the target INI file for the copy and, since INIMAINT only
maintains a single target copy filename and does not save this
filename from one execution of INIMAINT to the next, the names had to
be reentered each time. INIMAINT will save the names of the System
and User INI File backup target files and present them as the default
target files each time a backup is requested. Finally, a new item has
been added to the Options Dialog that allows the user to bypass being
asked if they want to use the current backup target files. If this
option is selected then INIMAINT will use the backup target files
without asking the user for confirmation.

2. The Copying File Box would always be displayed during a copy, even
if the Option was set to not display it. This has been fixed.

3. There were two potential heap corruption situations in the INICOPY
program. In one case the wrong form of the free API was used. In the
other case, it was possible to free the same memory block more than
one time. Both of these have been fixed.

4. The Condense item on the Recover menu has been improved in two
ways. First, INIMAINT will now automatically build a name for the
temporary INI file and insure that it does not duplicate an existing
file, this eliminates the need to ask the user for the temporary
filename. Second, once the initial copy is done, INIMAINT will use
the standard copy to make a second copy of the new file, erase the
original file and then rename the second copy to the original name.
This eliminates the need to do a second INI type of copy, which can
take a relatively long time. The effect of this is to significantly
reduce the amount of time that is required to do the Condense.

5. There was a serious bug in the Condense Both INI files code. The
temporary file was not erase between the two copies, so the second
file contained everything from both files. This has been fixed by
erasing the temporary file immediately after the copy.

******************************* V1.1l  *******************************

The items fixed in Version 1.1l are:

1. When attempting to do a Copy or Move with the System or User file
as either the source or target file and lower case characters were
user in either file name, the Copy could fail because INICOPY did not
recognize the names as the names of these files, which must be opened
differently. This has been fixed by forcing the names to upper case
before checking them against the names of the standard files.

2. If an error was encountered setting the normal or wait pointers,
it was not reported because the subroutines did not return an error
return. This has been fixed.

3. If Cancel was chosen when the initial Condense Dialog was
displayed a SYS3175 error would occur because a NULL pointer was
passed to free(). This has been fixed by moving the free() to a point
after the pointer has been validated.

4. It was possible for certain entries in some INI files to cause the
INIMAINT Repair Dialog to terminate with a 1109 logic error and a DOS
error of 123. This was caused by passing a name to DosLoadModule that
it considered invalid, INIMAINT did not check for this return and
would, therefore, post it as an error. This has been fixed by
including this check in the list of returns that are considered valid
returns by INIMAINT.

5. A logic error 1111 with a DosError of 15 was possible during a
Repair because INIMAINT did not check for an Invalid Drive return
from the DosOpen of a drive. This has been fixed by including this
error in the normal set of checks.

6. When INIMAINT starts, it saves the current pointer from the
Desktop so that it will know which pointer to restore after putting
up the Wait pointer. It was possible, if some unusual pointer was
displayed at the time that INIMAINT saved the current pointer, that
the wrong pointer type would be saved and an attempt to restore to
this incorrect pointer would cause a logic error 616. This has been
fixed by saving the standard pointer rather than attempting to save
the current pointer.

7. When the Condense of both the System and User INI files was
selected. The desktop was reset two times for each file. This caused
two problems, first, it takes a long time to reset the desktop and,
second, on certain occasions it left the desktop in a condition where
it was necessary to reboot before any work could be done. This has
been fixed by, in this situation, copying both the System and User
INI files before the first Reset. This way the desktop is only reset
two times, which is the minimum possible.

8. Because of a conflict between the LOCKUP facility and Dialog boxes
that have had their Parent switched to the Desktop Object Window, in
order to make the dialog not visible, the Option that sets the
display of the Copy Dialog will not work. The Copy Dialog will always
be displayed, no matter what the setting of the Option. Once this
problem is researched and something is done to remove the conflict,
the Option will be reenabled.

******************************* V1.1m  *******************************

The items fixed in Version 1.1m are:

1. When a Size was cancelled using the Esc key, the pointer did not
return to the normal pointer and the thread was not terminated, thus
INIMAINT would not do any work and had to be cancelled externally.
This has been fixed.

2. The Options Dialog was becoming too high, so it has been broken
into tow side by side lists.

3. A new Option, Fast Copy, has been added. If this Option is
activated then INIMAINT will use special high speed methods to access
the INI files when an entire file is being Copied, Moved, Backedup or
Condensed. This greatly reduces the time necessary to process large
INI files, such as the System and User INI files.

******************************* V2.0  *******************************

The items fixed in Version 2.0 are:

1. This version is a full 32 bit version.

2. A number of improvements have been made to the INSTALL procedure,
including the ability to install all the files into a single
subdirectory.

3. The Repair and Compare Dialogs had the Options box and the results
Listbox too close together the Dialog was also too high to
comfortably fit on a default 640x480 screen. Both of these have been
fixed.

4. When an error was encountered in the Repair Process, the line from
the INI file that caused the problem was not placed into the
supplemental error text field. This has been fixed.

5. Because the 16 bit Prf API's were limited to 64K of data for any
key Value, INIMAINT was limited to reading and displaying this amount
of data. The restriction has been removed with this version because
of the conversion to full 32 bit.

6. The Repair Function had attempted to see if *.PSF files that were
in the INI files with no path information actually existed on the
Desktop. DosLoadModule was used for this check, since the files
should be in the LIBPATH. It turns out that DosLoadModule will not
find anything other than DLL files, so this check was removed.

7. The Repair Function ignored files that had a pathname that
indicated they were on a floppy drive, a disk drive with removable
media, a tape drive, an unknown type of drive, an invalid drive and a
drive that could not be accessed via DosOpen. Since it is very
unlikely that any INI file entry that has a pathname that starts with
any of these type of drive is one that should remain in the INI file,
all of these conditions have been added to the list of situations
that INIMAINT will recommend for removal.

8. If Help was requested while doing a Repair after a new Save INI
File or Write File was selected, the Help would not work because the
Repair Dialog was not reset as the active help window. This has been
fixed.

9. If the Repair function encountered a path and filename combination
that looked like it was valid, but it was not, the Repair would
terminate with a 1109 Logic Error Code. This has been fixed by adding
checks for an invalid filename at the appropriate points.

******************************* V2.0a  *******************************

The items fixed in Version 2.0a are:

1. V2.0 forced and path and filenames to upper case in a number of
places. The caused a number of problems with lower case characters in
filenames and this code has been removed.

2. It was possible for the New File Dialog to go into a loop during
the initialization phase. This has been fixed by checking if the code
involved has already been executed, and causing an abend if it has.

3. Two of the SIZE Accelerator keys used Alt-F8 and Alt-F9, which are
used by OS/2, so they are not available. The SIZE User INI File has
been changed to Alt-R and the SIZE System INI File has been changed
to Alt-M.

4. The New File Dialog was not wide enough, so it has been expanded.

******************************* V2.0b  *******************************

The items fixed in Version 2.0b are:

1. Because of problems with the custom New File Dialog, this version
has been modified to use the standard OS/2 New File Dialog.

******************************* V2.0c  *******************************

The items fixed in Version 2.0c are:

1. When INICOPY was invoked by INIMAINT, the path and filename of the
Input and Output files were not enclosed in quotes. This created a
problem with parsing the parameter string. This has been fixed by
enclosing these two parameters in quotes.

2. When the Condense was used the part of the initial message that
said that the Desktop would be reset twice was confusing. The part of
the message about resetting the Desktop twice has been removed so
that the message now simply states that the Desktop will be reset.

3. During the Condense, some of the messages displayed in the right
hand window were too long for the window. The window has been
expanded so that it will now display the full message.

4. Because of the warning about resetting the Desktop, users have
sometimes waited for some time after a Condense has completed, since
they do not want to cause a problem with their environment. This is
because there is no clear indication that the Condense is complete.
This has been fixed by displaying an additional dialog that will tell
the user that the Condense is finished and it is okay to resume
normal operations.

5. When the Fast Copy Option was used, INICOPY did not validate the
input file to insure that it was an INI file and one that the Fast
Copy code understood. This has been fixed by adding two new checks to
INICOPY and to the Copy Dialog in INIMAINT. One check will report an
error if the input file is not a valid INI file. The other will
change the Fast Copy to a normal copy if the INI file is not one that
the Fast Copy Code understands, thus making the file not valid for
Fast Copy.

6. The Condense routine has been updated to test the file to be
Condensed to see if the Condense is really necessary. If the Condense
will not reduce the size of the file, then the user will be informed
of this via a Message Box.

******************************* V2.0d  *******************************

The items fixed in Version 2.0d are:

1. There were a number of places where the return from a PM API call
was converted to a 32 bit integer by using the SHORT1FROMMR macro and
then casting the result to a 32 bit integer. Because the macro goes
through an unsigned short variable, this did not work for negative
numbers, such as LIT_END. The result of this was that some things did
not work correctly, including selection of a new member of a group.
All of these situations have been fixed by having the macro fill a 16
bit integer and then using the 16 bit integer to fill the 32 bit
integer.

2. If INIMAINT could not open a file as a valid INI file and the
current INI file could also not be opened, INIMAINT would just start
and end with no error message. Users with this problem were very
confused by this and did not know what was happening. This has been
fixed by adding code that will insure that at least the error dialog
will be displayed in any error situation.

3. If an error was encountered attempting to open the default INI
file at the very start of the execution of INIMAINT, it was possible
for the Error Dialog routine to get an access violation because some
pointers were NULL and the NULL value was not tested. This has been
fixed by adding code to test the pointer values for NULL and print
None if they are not yet set.

4. When the initial file that INIMAINT attempted to open was a file
with no applications or keys, an error was encountered because the
determination of whether the file was in the new or old format would
result in an invalid file setting. This has been fixed by
specifically checking for an empty file.

******************************* V2.0e  *******************************

The items fixed in Version 2.0e are:

1. Because of the large number of possible items in the Repair
window, it was possible to exceed the maximum capacity of a Listbox.
Therefore, the Repair window has been changed to a Text type
Container.

2. An additional option has been added to the Repair selections. If
the users chooses to simply have the items that would be Repaired
displayed in the Window, it is now possible to select the items that
they want repaired and then check the 'Repair Selected' Checkbox and
then Execute and those items that are selected will be Repaired.

3. Because there will now be a number of different Repair actions,
the selection of the type of Repair desired is now a Combobox rather
than a Checkbox.

4. A new Repair items has been added, Removal of any Key with a Zero
Length Key Value. These Keys cause a problem for the WPSBKUP program
and have no value.

5. A new Repair capability has been added, the removal of any
File/Directory Handles in the OS2SYS.INI file that point to Files or
Directories that are no longer on the desktop. If a Drive or
Directory is deleted using this facility, all subdirectories and
files in the Directory and Subdirectories are also deleted. In
addition, making any changes in this area requires that the Desktop
be reset before the WPS will recognize the changes, so this will be
done upon dismissal of the Repair dialog.

6. A new Repair capability has been added, the removal of any WPS
entries in the OS2.INI file that point to objects that are no longer
on the desktop.

7. A new Repair capability has been added, the removal of any Objects
in the OS2.INI file that the user wants removed from the INI files.
There is currently no known way to verify whether the Objects
actually exist, therefore, INIMAINT cannot automatically delete
invalid Objects.

8. The capability to display the contents of the File/Directory
Handles, Objects and WPS entries has been added to the Repair.
Although this is not strictly a Repair function, it allow the user to
see, save in a file or print the expanded information. This allows
the user to determine the actual meaning of all the random looking
numbers seen in the OS2.INI and OS2SYS.INI files for both Key Names
and Key Values.

9. It was not possible to always print the contents of the Repair
Window because the print routine would not handle an empty line.
This has been fixed.

10. It was possible to initially start INIMAINT in such a way that it
would set the default window size at zero, even though the window was
not minimized. When this occurred, the INIMAINT window would not be
visible and it would not be in the minimized folder. This has been
fixed by adding checks to force the window to a minimum size if it is
not minimized.

11. I the user of a registered copy of INIMAINT set the Logo Display
Time to indefinite, INIMAINT would abend during its initialization
because a negative number was passed to the WinStartTimer API. This
has been fixed by adding code to check for a negative number and to
not even start the timer in this case.

12. The word 'reason' was not spelled correctly in the message that
informed the user that the Help was not available if the Help file
could not be found. This has been fixed.

13. There was no user notification when INIMAINT was about to create
a new INI file because the file the user selected did not already
exist. This has been changed so that the user will now be informed
that INIMAINT is about to create a new INI file and the user will
have the option of creating the new file, choosing a different file
or canceling INIMAINT.

14. The type of ICON displayed in some of the message boxes was not
the appropriate ICON. These have been fixed.

15. It was not possible to add any Groups to an INI file because the
response from the Prf API that deleted the old Groups was changed
from TRUE to FALSE if the old Group information did not exist. This
would cause a 704 logic error when the OK button was chosen on the
Group Dialog. This has been fixed by checking for the Not in Index PM
Error Code when a FALSE is returned by this API and accepting this as
a valid response.

******************************* V2.0f  *******************************

The items fixed in Version 2.0f are:

1. When Repairing Dir/File Handles and the drive letter is selected
for deletion, all of the invalid directories and files on the drive
should be deleted. It did not happen if the drive was a valid
drive. This has been fixed by adding extra logic to check for this
specific condition.

2. If the number of Dir/File handles becomes very large, it is
possible that they will be stored in the OS2SYS.INI file in multiple
pieces. 2.0e would ignore all but the first piece. This has been
fixed by continuing to get the data until all of the pieces have been
accessed.

3. There were a number of problems with the dumping of the Repair
Variables. These have all been fixed.

4. If the Device Driver for a drive did not correctly handle the API
used by INIMAINT to identify the drive type, it would cause INIMAINT
to terminate with a Logic Error 1112. This was caused by a
undocumented return code from the API. Typically, the device driver
is an old driver and often is supporting a CD-ROM device. This
problem has been fixed by adding code to handle the new return from
the API and, when the error return is seen, INIMAINT will do a
further check on the drive and, if it is write only, will identify it
as a CD-ROM device. Otherwise, the drive will be identified and an
invalid drive.

5. There were circumstances where a Repair to the WPS entries would
get a logic error 1104 because of an attempt to allocate a zero
length memory block. This has been fixed by initializing the Key
Value Length field to a small value rather than zero, so that the
allocation will work.

6. Invalid PM_Abstract:FldrContent entries that had an invalid Object
ID were not deleted, even though the entry in the Repair Window would
indicate it was deleted. The reason was the some of the value level
items were valid, but the key name was not a valid Object. This
caused the item to be deleted from the INI file and then reinserted.
This has been fixed by insuring that all value level entries for an
invalid key name are also marked as invalid because of the key name.

7. The Repair Save and Repair Write file were not saved from one run
of INIMAINT to the next. Additional code has been inserted to save
the current information and it will be presented as the default for
future Repair activities.

******************************* V2.1  *******************************

The items fixed in Version 2.1 are:

1. When there was nothing to Repair for the Repair Dir/File Handles
and Repair WPS Entries, the message box that told the user this was
not displayed because the variable that the message box code tested
was not set correctly. This has been fixed.

2. When displaying the Dir/File Handles the drive entries were
displayed even if there were no Directory or File entries to display
for the drive. This has been fixed by adding additional code to only
add the drive information to the window when the first Directory or
File is added.

3. The Help for the new Repair functions was not complete, but has
now been completed.

4. Some object values in the 0x20000 range could be identified as
invalid, when they were actually valid. This has been fixed by
insuring that values in the 0x20000 range are correctly checked
against the Objects entry in the OS2.INI file.

5. Some of the Repair functions take a considerable amount of time
and often the INI files do not have any errors in them, so the only
result is a message box telling the user that there is nothing to
Repair. I was easy to miss the appearance of this box, so code has
been added to cause a beep whenever the message box is displayed.

******************************* V2.1a  *******************************

The items fixed in Version 2.1a are:

1. If a drive connected to the system via a switch was not switched
onto the system when a Repair was requested, it was possible for a
couple of the API's to return the General Failure Error code, which
was not correctly handled by the Repair code. The code has been
changed to look for this specific error condition and to treat the
drive as an Inaccessible Drive.

2. When a Repair was requested, the Do Not Save Option was not turned
on and the Save INI file had not been selected, INIMAINT would
terminate with a logic error code of 1. This was caused by an
incomplete check of the filename, specifically, it was checked for a
NULL pointer, but not checked to see if it was an empty string. The
additional check has now been added.

3. When Repairing the File/Directory Handles, the Ask Before Repair
did not work because there was a drive level check placed in front of
the code that asked the user and it should have been placed after the
code that asked the user. The code has now been moved to the correct
position.

4. Alt-R was specified as an accelerator key for Size User INI File.
However, this key was needed for the Recover Menu. Therefore the Size
User INI File has been changed to Alt-E.

5. In order to facilitate the processing of both the WPS Entries and
the File/Dir Handles, a new set of Repair types have been added that
will List or Repair both sets of Entries at one time.

6. When Invalid Handles were being listed or the Handles were being
Repaired. The actual drive entry for CD-ROM and Floppy drives was not
displayed in the Window. Additional code has been added to insure that
these entries will always get put in the window when appropriate.

7. If the Ask First Repair Type was chosen, it was possible that the
user could be forced to respond Yes or No to a very large number of
items and there was no way to stop the questions until all of the
appropriate items had been presented to the user. The message box has
now been modified so that there is also a Cancel entry that will
terminate the questions and do the Repair actions that had been
requested to that point.

******************************* V2.1b  *******************************

The items fixed in Version 2.1b are:

1. When attempting to open a network drive, under some circumstances,
INIMAINT would get a logic error 1111 with a dos error of 3. The dos
error indicates that the path is not found and is not handled
correctly. Code has been added to check for this return and to treat
the drive as unavailable.

2. If INIMAINT is added to the WPS main menu, it is started with the
Desktop subdirectory passed as a command line parameter. This would
cause a dialog box to appear indicating that the directory was not a
valid INI file and asking if the user wanted to create it. In order
to prevent this from happening, code has been added to examine the
start-up filename and, if it is only a directory, to ignore it.

3. If INIMAINT was started with a current INI file that had been
deleted, one of two things would occur. If the INI file could be
created, it was created and used as the default. If the file could
not be created, for example, if the subdirectory had also been
removed, then INIMAINT would terminate. INIMAINT will now check to
see if the default file exists and if it does not, ask the user if he
wants to create it and, if he does not, then it will ask the user to
enter a new filename.

4. When the Repair dialog was displayed and the current entry in the
combobox that lists the type of repair was selected by hitting the
tab key. A request for help would cause INIMAINT to terminate. Code
has been added to the combobox help routine to check for this
condition and to insure that the correct help panel is displayed.

******************************* V2.1c  *******************************

The items fixed in Version 2.1c are:

1. Some users found the use of the word 'List' in the for the type of
Repairs to be misleading, so the word 'List' has been changed to
'Display'.

2. The message 'Doing Repair' would appear in the Repair Dialog even
when no actual Repair was being performed, but the Display window was
simply being loaded. Additional code has been added to change the
message to 'Loading Display' when that is all that is being done.

3. The Handles structure for certain kinds of Network situations have
a Drive entry that is not a normal drive letter followed by a colon.
The Repair Function did not handle this situation correctly and would
get a 1114 Logic Error. This has now been fixed and will be
recognized as a Network situation.

4. The Repair Options dialog did not have an entry to allow the user
to ignore or bypass Network drives and other Network entries. A set
of Network options has now been added.

5. There were situations where IniMaint would indicate an INI file
did not exist, when it was simply opened in such a way that all other
users were denied. This has been fixed by handling the check for
whether the file exists in a different manner.

6. A number of additional error returns from the call to the DosOpen
API that indicate a drive entry is a Network Drive have been
identified and added into the code that determines what kind of drive
the Repair function is dealing with.

7. The return from WinPostMsg was treated the same as the return from
WinSendMsg and normally not checked. This could result in a message
posting error that would not be detected by the error checking code.
All calls to the WinPostMsg API have been changed so that the return
code from the API is validated.

8. There are situations where it was not clear exactly where an error
occurred when the Dump Dialog was invoked. The reason for this is
that there are a number of error codes that are used by more than one
subroutine. In order to address this problem, the error routine is
not passed an additional parameter which identifies the subroutine
that is reporting the error and the id of the routine that first
reports an error that will cause the Dump Dialog to appear is saved
by the error reporting routine. This information has also been added
to the Dump Dialog Window.

9. The only way that the Repair function would ask the user about
each Repair action was if the user wanted to be asked about every
single item that needed to be repaired. It was not possible to select
certain items and then have the Repair function only ask about those
items. The Repair code has been modified so that it is now possible
to check the Ask box with some of the items selected and the user
will then only be asked it they want to Repair the selected items.

10. A number of the Accelerator Keys used the Alt Key in conjunction
with a letter. This cause problems with menu selections and a number
of other functions. All of these Accelerator Keys have now been
replaced with Ctrl-Alt and a letter combinations. Refer to the
Accelerator Key section of the Help for a detailed list.

11. When doing the Repair of the WPS entries or the File Directory
Handles, selecting certain items to be Repaired also would cause
other lower level items to be Repaired. For example, selecting a
Drive entry would cause a Repair to all the items on that drive. This
was not clear from the behavior of the highlighting in the window,
since only the selected item was highlighted and not the other items
that would also get Repaired. The highlighting code has been changed
so that all of the items that are going to get Repaired will now be
highlighted.

12. The initial version of the code to handle Extended Attributes has
been added in this version. When the Extended Attribute feature is
activated, IniMaint becomes SysMaint and a new set of menu items
appear that provide editing, displaying, moving, copying and a
number of other functions in the Extended Attribute area. The
Extended Attribute functions are not Shareware, but are only
activated when a fully registered copy is being used. Refer to the
Help file under Registration for details.

******************************* V2.1d  *******************************

The items fixed in Version 2.1d are:

1. The TEST function for the Extended Attributes has been
implemented.

******************************* V2.1e  *******************************

The items fixed in Version 2.1e are:

1. An additional option has been added to the Repair Options Dialog
box. This item, Bypass Known Errors, will cause the Repair function
to make some additional checks for errors it knows about and should
not be of concern to the user. A full list of the things bypassed are
in the on-line help file.

2. During the updating of an INI file, OS/2 creates a file in the
same directory with the same name except with an extension of ###.
The ### entry gets added to the Handles structure in the OS2SYS.INI
file. Since the ### file only exists for a short time, it will always
be identified by the Repair function as an entry in the Handles that
cannot be found. Additional code has been added so that when the ###
file is not found and the user has asked to bypass known errors, a
check is made for a file with the same name with an INI extension. If
the INI file is found, then the Repair function will not identify the
### file as a file not found.

3. The EA Test Dialog has been added to the Help file.

4. The Help file has been updated to also describe SysMaint.

5. An additional item has been added to the Extended Attribute
Defaults that allows the user to specify that they always want to
continue when a sharing error is encountered while processing
Extended Attributes.

6. Deskman/2 adds a zero value entry to the Abstracts:Icons entry in the
OS2.INI file. This entry is not found in the list of Objects,
therefore, this entry is reported as invalid. Since we know the entry
is valid, additional code has been inserted to check for this
condition and to identify the Icon as the Deskman Icon if the user
wants IniMaint to bypass known errors.

7. The WPSBKUP program creates a temporary object with the name of
NFD73 during the backup process. This causes an entry to be made in
the Handles structure for this filename. Since the file is temporary,
it will always be identified as a file not found. Code has been
included in this version to not report this specific filename if the user
wants IniMaint to bypass known errors.

8. When the EA Test function found entries to add to the Test Dialog,
the processing EA's Dialog was left on the screen. The exact reason
for this is not known, but I believe it is associated with loading
two different modal dialogs with the same Parent and Owner and then
destroying the second dialog before destroying the first one. It was
not possible to debug this problem because it would not occur when
the program was run under IPMD. The problem has been fixed by
including code to destroy the Processing EA's dialog before the
Testing dialog is created.

9. If some sort of terminal error was encountered before the main
window was created, no error Dialog would appear because the error
routine was posting a message to the main window in order to get the
error Dialog to appear. The error routine has been changed to check
to see if the main window handle is valid and, if it is not, the
error routine will display the error Dialog directly.

10. If the OS2.INI file was corrupted to the point that the data
needed by IniMaint or SysMaint could not be read from the file, it
was not possible to run the application, since it would terminate
during the initialization phase. In order to get around this problem,
the application will now look for an Environment Variable INIMAINT=
and, if this variable is found, it will assume this is the full
pathname of a file than should be used to obtain the IniMaint or
SysMaint default information. For example, if the user wanted to use
an INI file with the name of:
     C:\OS2\APPS\INIMAINT.INI
then you would add the following line to your CONFIG.SYS file or to a
CMD file that runs IniMaint or SysMaint:
SET INIMAINT=C:\OS2\APPS\INIMAINT.INI

11. If a terminal error occurred before the name of the current INI
file was filled in, the error Dialog code would get a protection
exception attempting to display this name. The code has been changed
to test for a null value before attempting to print the name.

******************************* V2.1f  *******************************

The items fixed in Version 2.1f are:

1. IniCopy has been upgraded to handle Extended Attribute files as
well as INI files.

2. The Add New Key Name item on the Action Menu did not work because
a return from one of the Prf API's was not tested correctly. The test
has been fixed.

3. A new item has been added to the Files Menu, Recall. Selecting
this menu item will cause a submenu to be displayed showing the a
list of the INI or EA files that were the current file. If one of
these files is selected, it will become the current INI or EA file.
The number of files displayed is controlled by a new Option in the
Options Dialog and has a default value of 10.

******************************* V2.1g  *******************************

The items fixed in Version 2.1g are:

1. When Updating the Extended Attributes from an EA file and one of
the Source Files or Directories has been deleted, SysMaint will get a
1317 Logic Error because the Set Path Info API will give a return
code of 3, indicating that the file is not found. Additional code has
been inserted to notify the user of this condition.

2. The Duplicate Key menu item has been updated to handle EA files.

3. The Rename Key menu item has been updated to handle EA files.

4. The Delete Key menu item has been updated to handle EA files.

5. Code has been added to deactivate the Add Application and Add Key
menu items when an EA files is the current file. Adding Extended
Attributes involves adding a number of different control items and
will be implemented via an entry on the Extended Attribute Menu.

6. Code has been added to delete the Condense items from the Recover
Menu if the version of OS/2 is 2.1 or later. This function makes no
sense for these versions, since no empty space is ever left in the
INI files.

7. After Editing an Extended Attribute file and switching back to an
INI file, the EA flag would sometimes not get reset, causing SysMaint
to think it was working with the wrong type of file.

8. Some of the Ctl-Alt Accelerator Keys did not work correctly
because of the order in which they were defined in the resource file.
The sequence of the definitions has been changed so that the
Accelerator Keys will work correctly.

9. The Dialog that is responsible for getting new character string
information from the user was not capable of handling a character
string longer than 32 characters. This limit has been increased to
255 characters.

******************************* V2.1h  *******************************

The items fixed in Version 2.1h are:

1. Popup menus have been added for the various windows. Clicking on
the RMB while the pointer is in the Application, Key Name or Key
Value windows will popup a menu with the items that are appropriate
for that window.

2. A Desktop menu item has been added to the SysMaint menu bar. This
menu will eventually have a number of different entries to allow
users to do various maintenance functions for the Desktop.

3. A Reset Desktop item has been added to the Desktop menu. This item
will simply reset WPS so that changes that have been made to the INI
and EA files that require the Desktop to be restarted will become
effective.

4. It was not possible to split the EAs from a Directory or to update
the EAs  for a Directory because a logic error 1346 would result. The
reason was that the name of the Directory that was used for one of
the API's still had the trailing slash on it causing a Path Not Found
error to be returned. The code has been modified so that the
Directory name is specified correctly.

5. After Repairing the WPS Entries and/or the Handles Entries, it can
take a considerable amount of time to free the memory for the
Container Records. In order to make sure the user knows what is
happening, a message dialog will now be displayed telling the user
what is going on.

6. It was possible for some of the WPS entries, such as
PMWP_ASSOC_TYPE, to be incorrectly marked as invalid. The reason was
that a case in a switch statement was missing a break, thus causing
it to fall through to the next case. The break has been added to the
code so that the entries will be reported correctly.

7. If the last item in the PMWP_ASSOC_TYPE Application was associated
with nothing, the association was simply left blank because the check
for any association entries in the structure did not work correctly
for the last entry. The test has been changed so that it will work
for all entries.

8. The titles for the Extended Attribute Submenu entries were
confusing for most people. This Submenu has been completely reworked
and will, hopefully, be more clear.

******************************* V2.1i  *******************************

The items fixed in Version 2.1i are:

1. The Edit item on the Extended Attribute Menu bothered some users
because Edit implies that things are going to be modified. When
SysMaint 'edited' the Extended Attributes, it did not change anything
unless the user asked for a specific update of the Extended
Attributes. Therefore, this menu item has been changed to View.

2. Running IniMaint or SysMaint would leave a zero length file in the
default directory, INIERR.TXT. This was caused by redirecting the
stderr output. The code has been changed so that stderr will only get
redirected when compiling the debugging version of the program.

3. The Extended Attribute Default option to delete temporary files
would only delete the files used in the Compare. The temporary files
created when the Extended Attributes are Viewed should also be
deleted when the user is finished Viewing the information. The code
has been changed to do the additional deletes.

4. Whenever the Control or Alt Keys were pressed and held, the Key
Value window would flash. This was caused by the code that disabled
and reenabled the window while a key was being processed. Additional
code has been inserted to prevent these keystrokes from being passed
to this window.

5. If the current INI file was deleted between runs of IniMaint, the
user was informed of this the next time that IniMaint was run and was
asked if they wanted a new file created. If the user replied NO, then
the standard User INI file, OS2.INI, was opened as the current file.
However, the IniMaint entry in the INI file for the current default
INI file was not updated. Therefore, the user would be asked about
the same file the next time IniMaint was run and this would continue
until the user did something to cause the information in the INI file
to get updated. Additional code has been added so that the
information in the INI file will get updated when the User INI file
is made the default.

6. A Defaults Dialog has been added to the Desktop menu to allow the
user to set the various default values and flags for the Desktop Menu
items.

7. It was not possible to use the Copy or Move entries on the Action
menu to copy the Extended Attributes for a single file to another
file if the target file did not already exist. The copy would
terminate with a message that the files were not compatible. This was
caused by code that opened the target file before the copy was
started in order to verify that the target could be used as a valid
INI or Extended Attribute file. This caused an empty file to be
created, which had not control information. When this file was opened
by the IniCopy program, IniCopy got an indication back from the open
routine that the target was not a valid Extended Attribute hold file
because of the lack of control information. The problem has been
fixed by modifying the open code so that it will use the default file
type that it was passed when it opens a file and the file does not
even have the signature bytes written to it, in short, it is
completely empty.

8. The Join would not work for certain combinations of source and
target sets of Extended Attributes if the sets were not the same
type, such as both the Extended Attributes for all the Directories in
a specific Directory. The reason for this was because a flag in the
structure used to control the Join was set from the wrong source. The
code has been modified so that the flag is now set from the correct
source.

9. I was not possible to Compare the Extended Attributes that were
current for a file(s) and/or directory(s) to a set of Extended
Attributes that had been saved in a file. A new menu item has been
added to the Extended Attribute menu that will now allow for this
type of Compare, Compare to Saved EAs.

10. Code has been added to automatically detect the condition where
the OS2.INI and OS2SYS.INI files cannot be updated. When this occurs,
the user will be informed of the situation and asked it they would
like for the condition to be fixed. If the user replies YES, then
IniMaint will go through a reset procedure that will fix this problem
and pick up where it left off.

11. In line with the item above, a new item has been added to the
IniMaint Repair menu that will allow the user to have IniMaint
automatically fix the problem of INI files that cannot be written to.

12. A new item has been added to the Repair menu that will allow the
user to run a test for INI files that cannot be written to. If the
condition is found, it will be automatically fixed if the user wants
it to be. This is for users who store the IniMaint or SysMaint
information in an INI file other than the OS2.INI file, thus would
not normally be automatically notified when the INI files cannot be
updated.

13. A number of items have been added to the Desktop menu for
SysMaint that allow for a Simple backup of the Desktop, including the
ability to keep as many generations of backup as desired, a selection
that will generate a backup CMD file that can be run at anytime and
will maintain all the generations, the ability to generate a CMD file
that will do a command line restore of the Desktop, and items that
will restore the two major parts of the Desktop, the directory
structure and the INI files, while WPS is operational.

14. This version introduces the 'safe' versions of the program,
IniSafe and SysSafe. These two versions do the same kinds of things
as IniMaint and SysMaint do, however, they will not update any files
or do anything that can cause a problem with the Desktop. If there
are users in an organization that you want to have access to the
things that can be accessed via IniMaint and SysMaint, but these
users should not be allowed to modify anything, then these users can
be furnished IniSafe and SysSafe in place of the xxxMaint version and
they will have this capability.

15. A number of new things have been added to the help files under
the category General Help Information. Most, if not all, of these
topics have also been inserted into the see also lists for the
appropriate subject areas. This section contains a discussion of the
environment that is required for IniMaint or SysMaint, a discussion
of different kinds of Desktop Backups, a description of and how to
address INI files that cannot be updated, notes on how the Extended
Attributes from different files are matched for things like Compare,
and a description of what IniSafe and SysSafe are. In addition, all
of the *.TXT files that are normally distributed with IniMaint and
SysMaint have been incorporated into the on-line help.

16. If the user was running an unregistered version of IniMaint, the
message that the registration information was invalid would appear
everytime the app was run. This was caused by the reuse of a variable
before it was tested to see if there was no registration information.
The problem has been fixed by using different variables.

17. The stack size for the secondary threads was not large enough, so
it has been considerably increased.

18. There were a couple of places where the memory allocation was
done using the wrong routine, which would cause a problem with
switching back and forth between the normal memory allocation
routines and the debug routines. All of the source modules have been
modified to use the correct memory allocation API call.

19. There was a problem with how the menu selection worked when the
main window menu was on more than one line. This seems to have been
caused by the fact that the frame window was not notified when some
of the menu changes were made. Code has been added to make sure that
the proper notifications are sent.

******************************* V2.1j  *******************************

The items fixed in Version 2.1j are:

1. If there was a Network Drive in the Handles0 or 1 structure in the
OS2SYS.INI file that was not in the normal format and any of the
handles were deleted. The resulting Handles structure would be
invalid because the code that rebuilt the Handles structure assumed
that the Drive entry had a two character name consisting of the Drive
letter followed by a colon. This is not always true for network
drives and the code has been modified to use the length of the drive
information in place of a default value.

2. The code in the routine that restores the Desktop Directory does
not remove the temporary CMD file after doing the restore because the
lines that were commented out for testing were not restored before
the 2.1i version was released. The comments have been removed and the
file will not get deleted. The filename will be of the form
TMMDDXXX.CMD where MM is the month, DD is the day of the month and
XXX is a sequential number starting from 001, and will probably be
001.

3. Because of the way the default was built and since that is what
was used during testing, none of the Desktop routines to build Backup
or Restore CMD files would work correctly once a new directory was
chosen. This is because the new directory would have a trailing
backslash and the default one did not. The problem has been fixed by
insuring that all directory names have a trailing backslash.

4. The Desktop Default Dialog would put the incorrect information
into the window that displays the name of the Backup and Restore CMD
files, if the user tried to change these entries. Actually, the
Default Backup Directory would be placed in the field.

******************************* V2.1k  *******************************

The items fixed in Version 2.1k are:

1. The Repair Objects entry in the Repair Dialog has been upgraded so
that the display will include the folder that contains the Object
and, when the Object is deleted, all references to the Object will be
removed from the INI files and the Desktop will be reset. This will
assure that the Object has been completely deleted, even if it cannot
normally be shredded.

2. The SysMaint Desktop Backup still did not work because of an error
in specifying one of the filenames. The first character of the
filename was left off. The code has been changed to create a CMD file
with the correct filename.

3. If the user chose the User INI File or System INI File options
from the Files Menu as the file to view immediately after Viewing a
set of file and/or directory Extended Attributes, the temporary file
that contained the Extended Attributes was not deleted and a message
would be seen indicating that the Current INI file could not be
deleted. This was caused by a failure to save the temporary filename
in the old INI file field when the two menu items above were
selected. The code has been updated so that the old filename will be
properly saved in both situations.

4. Some changes have been added to the Dump code so that the Version,
Date and Time of the dump information will be included.

5. The Dump of certain control structures was limited to only 100
members of each structure. There were times when this limit was too
small and critical dump information was in included. Therefore, the
limit has been increased to 1000.

6. A new item has been added to the available types of INI File
Repair. IniMaint will now check the OS2.INI file for leftover
PM_ProgramListxxx entries and remove them at the user's option. These
entries are no longer needed under OS/2 2.1 and can cause problems
with deleting of Program type Objects that are contained in the
entries.

7. A new item has been added to the available type of INI file Repair
that will remove old Printer information from the OS2SYS.INI file.
When Printers are removed from the Desktop, some of the old
information is left in the INI file. While this information does not
cause a problem with the Desktop, it can cause a problem with various
programs, such as Word Processing programs, that look in the
OS2SYS.INI file for printer information. Some of these programs will
assume that the old printers can still be used. However, any attempt
to print to the old printers will be unsuccessful. This item will
examine the 10 or so entries in the OS2SYS.INI file that might have
old printer data left and remove it at the user's option.

******************************* V2.1l  *******************************

The items fixed in Version 2.1l are:

1. The SysMaint Restore process was not sufficiently robust, so a
number of things have been done to address the problem. First, the
Restore CMD file will no longer use OS/2 Commands to clean up the
Desktop Directory, this will now be done via a new program, IniClean,
that simply has the root as the input and will use the root
information to remove whatever Desktop Directories and Files
currently exist. In addition, the name of the programs that are
executed are now fully qualified, so the CMD file will work with
any directory as the default directory.

2. In order to assure that the executable files and the source and
target files for the various Backup and Restore actions will all be
found correctly, all file, directory and program names are now fully
qualified and enclosed in quotes.

3. The Desktop Restore Command file did not have lines that would
erase the existing OS2.INI and OS2SYS.INI files before the UNZIP was
done. Additional lines have been added to insure that this is done.

4. The Repair of the PM_ProgramListxxx entries did not remove all the
references to the Application. It is possible for entries also be
stored in the PM_Workplace:Location Application. Additional code has
been added to insure that these entries are also deleted.

5. The Repair Printers Item did not recognize IBMNULL Printer
entries, which should never be deleted, if they had lower case
characters in the name. The type of compare has been changed so that
upper and lower case characters will compare the same.

6. When an attempt to remove a Printer entry was not successful, the
program would terminate with a Dump Dialog. Since the inability to
remove a Printer entry is not really a terminal type of error, the
code has been changed to simply notify the user when this situation
has occurred.

7. There were some areas in the Repair Printer and Repair
PM_ProgramListxxx routines where memory could be left allocated. This
memory would be freed once the program terminated, but should not be
left allocated. The problem areas have been fixed.

8. A new Button has been added to the Dump Dialog, Continue.
Previously, when a Dump occurred because of some sort of error
condition, the user had no option but to terminate the program. The
Continue Button gives the user the ability to continue processing
even though an error has occurred. If the user chooses to Continue,
they will be warned that an error condition could continue to exist.

9. If there was a problem removing a printer entry, the Dialog that
indicated that the INI files  could not be written to would appear.
This was in error, since the problem was that a specific OS2SYS.INI
file entry could not be removed, therefore, additional code has been
inserted to handle this condition.

10. If one of the threads other than the main thread got an error
attempting to make a change to the OS2SYS.INI or OS2.INI files, the
code that indicated that the INI files could not be updated would be
entered. This code would abend with a logic error of 1201 because an
attempt would be made to pop up a message box for a thread that did
not have a message queue. Additional code has been inserted to insure
that the check will only be made for the main thread.

11. In order that the user knows the limitations of the Sysmaint
Restore process, a message box will be displayed anytime the users
asks that the Restore CMD file be created that explains the
limitations.

******************************* V2.1m  *******************************

The items fixed in Version 2.1m are:

1. If the user selected Continue after a dump and the supplemental
error text field had been allocated, the memory was not freed. Code
has been added to free this memory.

2. There were possible combinations of user names and SysMaint
registration codes that would not register correctly because a
variable would evaluate to zero. Additional code has been added to
check for this condition.

3. It was possible to get a protection exception when attempting to
remove invalid registration information. The code has been changed so
the INI file will get updated correctly.

4. If the IniClean program used to do the restore of the Desktop did
not find the old Desktop, it would terminate with an error rather
than simply allowing the restore process to continue. Additional code
has been added so that the condition will no longer be treated as an
error.

******************************* V3.0  *******************************

The items fixed in Version 3.0 are:

1. It was possible to get a logic error 1109 when attempting to do a
Repair because of filenames in the Handles structure that contained
*. This generated an Invalid Path DOS error that IniMaint was not
handling correctly. Additional code has been inserted to handle this
DOS error code.

2. During certain copy operations it was possible to get a 1201 logic
error code because an attempt was made to pop up a dialog box for a
thread that did not have a Message Queue. This problem has been fixed
by insuring that every thread that creates an Anchor Block also
creates a Message Queue.

******************************* V3.0a  *******************************

The items fixed in Version 3.0a are:

1. Under certain circumstances the Application level compare of two
INI files would go into a loop. The problem was caused by a pointer
not getting incremented correctly and has been fixed.

2. An additional check has been added to the Repair File Handles
routine that will look for Orphan Handles, Handles with no Parent in
the structure. This condition would previously cause a 1115 Logic
Error, but will now be added to the list of invalid handles with a
error message that identifies it as an orphan handle.

3. If the INIMAINT= Environment Variable was invalid, the Dump Dialog
would appear after the message box that informed the user. There was
no reason to display the Dump Dialog and it will no longer appear.

4. Some users were confused by the All Groups display, which includes
the Applications which are in any of the defined Groups. Therefore,
additional text has been added to the Help entry that discusses the
contents of the Groups Listbox.

5. A number of new users have mentioned that they were not sure how
to get started with IniMaint and SysMaint, so a Getting Started
section has been added to the Help file.

******************************* V3.0b  *******************************

The items fixed in Version 3.0b are:

1. While getting the Extended Attributes for the Desktop of the
MultiMaint Portable Backup, the memory for the EAs for each directory
or file should have been freed after the information was recorded in
the *.EA file. However, this was not done, causing the program to use
very large amounts of memory. The appropriate areas are now freed
correctly and the total memory requirement is much smaller.

2. If a Filename in the Handles structure contained invalid
characters, it was not identified as having a invalid format and was,
therefore, no placed in the window listing files that should be
Repaired. This could result in a number of different problems ranging
from a Desktop that would not boot to Orphan Handles in the File
Handles structure. The code has been fixed by adding a new type of
error that will identify these entries as being an invalid name.

3. Additional information will be captured by the MultiMaint Beta
Code. This is the second of three steps in producing a workable
version of the program.

4. The MultiMaint Beta did not release the memory as it obtained the
Extended Attributes for each Directory or File. This has been fixed,
so the Portable Backup  code will no longer cause the Swap file to
grow by several megabytes.

5. Additional error recovery has been added to the MultiMaint code so
that recovery from an error condition will be reported correctly, all
of the WPS pointers changed for the data collection will be restored
to their original value and there will be no problems with WPS after
the test.

6. The IniClean program would leave part of the Desktop when there
were several levels of nesting of Folders because the Folders were
done in the incorrect sequence and some of the chain information was
lost. The sequencing has been corrected and all Desktop information
will now be deleted.

7. If a generation other than generation 01 was used for the restore
of the Desktop, an error was encountered because there was a space
between GO and TO in the CMD file. The space has been eliminated, so
the CMD file will not encounter the error.

8. There were a number of situations where a Dump Dialog would appear
if the name of a file used by one of the dialogs was old and pointed
to a directory that no longer existed. What should happen is that the
user is informed that the file cannot be opened. All of the locations
that would have generated a Dump Dialog have been changed to simply
pop up a message box.

9. The accsswps.dll file is a dll that is only needed for the upgrade
to SysMaint, which is in beta. However, V3.0a would not run without
this file because there were some calls to the AccessWPS API's in the
Dump Dialog code. These lines have been made conditional based on
some compile options, so this dll is not longer required for IniMaint
or SysMaint and can be erased.

10. Two items have been added to the popup menu for each of the
windows. One of the items will write the contents of the window to a
file and the other will print the contents of the window.

11. It was possible for IniMaint to run out of stack space in certain
very unusual situations, so the  primary stack size and the thread
stack size have both been increased.

12. Although it is, in theory, impossible to have an Application with
no Keys, some examples of this condition have been seen in some INI
files. It was not possible to delete these Applications with IniMaint
because IniMaint attempted to use a pointer that was NULL in this
particular situation. Additional code has been added to handle this
condition and these Applications can now be deleted.

******************************* V3.0c  *******************************

The items fixed in Version 3.0c are:

1. The Write and Print Window contents items added to the popup menus
in the previous version, did not identify the Application when the
Key Name window was the source and did not identify both the
Application and Key Name when the Key Value window was the source.
This made it necessary to manually document this information on each
printout or in each file. Additional line have been added to the
heading information to output this information.

2. The name and location of the logging files for the Repair,
Extended Attributes and Portable Backup functions were fixed and
would always be in the default directory. Now, both the name of the
logging file and its location can be selected by the user from a new
entry in the Options or Defaults Dialog for the particular function.
The selected file will be remembered from one run of IniMaint or
SysMaint to the next.

******************************* V3.0d  *******************************

The items fixed in Version 3.0d are:

1. The initial Portable Restore capability has been added to the
MultiMaint version.

2. The application names of the Objects saved during the Portable
Backup have been changed to eliminate the Desktop Directory. This was
redundant information, since every Application started with the
Desktop, since every Object is on the Desktop.

3. The INI File write routine will no longer cause the Dump Dialog to
appear when it finds an error, it will simply pass the error back to
the calling routine. It will be the responsibility of the calling
routine to pop up the error dialog. The problem with having the write
routine pop up the error dialog is that the id of the routine
actually having the problem and the INI file that was causing the
problem would often be lost.

4. There were conditions where the Save or Write INI file for various
functions could get the RO attribute left on even though the file was
not actually opened. This would cause a 704 Logic Error the next time
the file was used because the file would be considered to be Read
Only by OS/2. Additional code has been inserted to insure that the RO
attribute is not set for these files, so that they will always be
usable.

5. When a error occurred during a Repair operation, there were
situations where the error logging was not sufficient to easily and
accurately determine the problem. Additional information will now be
logged to improve this area.

6. If it was not possible to open the file currently set as the Save
INI file for the Repair because the file had been chosen in a past
run and the directory structure had been changed to make the path and
file name combination invalid, an abend would occur with a generic
Logic Error code of 1. Additional code has been added to insure that
the Save INI file can be opened before any Repair is executed which
will need to Save any of the INI file data.

7. The timeout for the execution of the WPS and SOM methods was set
at 30 seconds, which turns out to be too short for some methods, such
as wpPopulate. Therefore, the timeout has been increased to 3
minutes.

8. The Repair Uninstalled Printers code would sometimes incorrectly
identify a Printer as not being installed because the key Value entry
for a critical Application had an ending semicolon. The semicolon
caused a compare to be unequal, thus causing the incorrect
conclusion. The code has been modified to ignore the semicolon when
doing the compare in question.

9. The physical sequence of many of the items in the Help file have
been changed to make them more logical. This has no effect on the
actual Help, however, there are programs that will transform the Help
file into a text file that can be used in a word processor or
printed. When this is done to the Help file, the physical sequence of
the items determines the sequence of the items in the output file.
The changes were made in order to make this process easier

******************************* V3.0e  *******************************

The items fixed in Version 3.0e are:

1. The DEF file for the DLL that holds the API's supplied with the
compiler had an incorrect DLL name because of the conversion from
V1.0 of the compiler to V2.01 of the compiler. This meant that
IniMaint and SysMaint would not run without the DDE4MBS.DLL file. The
DEF file has been fixed and the C SET/2 DLL is no longer required.

******************************* V3.0f  *******************************

The items fixed in Version 3.0f are:

1. There were situations where memory would not get freed when
Continue was selected after the Dump Dialog was displayed. Code has
been inserted to insure that everything is freed once the dialog has
been dismissed.

2. If the Save INI file does not exist when an attempt is made to do
a Repair, a logic error 634 will result because an attempt is made to
remove the Read Only Attribute from a file that does not exist and
the code does not test for this condition. The code now makes the
appropriate tests and this error will no longer occur.

3. The initial Explain capability has been added to the popup menus
for each of the three windows. This is a feature that will continue
to evolve over time as more and more is learned about the various
entries in the INI files and Extended Attributes.

4. The Repair File Handles did not correctly process Directory or
File Names that had characters in them that are not considered
printable Ascii characters. The names were immediately identified as
invalid, even though no actual check was made. This turns out to be
an incorrect approach because there are names in non-US versions of
OS/2 that are valid and contain these characters. The code has been
modified so it will check a name from the Handles structure, even if
the name contains characters that are not printable Ascii characters.

5. The EA Test Dialog Write File name was not remembered from one run
of the Dialog to the next. This forces the user to select this file
from scratch every time they want to have the contents of the Listbox
written to a file. The Filename will now be remembered and it will be
displayed as the Default File whenever the Write button is selected.

6. There was still a problem with certain printers being identified
as not being installed, when there were perfectly valid. Additional
changes have been made to the code that validates the printers so
that printers that are valid will not be treated as invalid.

7. The default selection on all three popup menus has been changed
from the Refresh item to the Explain item.

8. The Help for the Popup Menu items: Write, Print and Explain have
been added.

9. It was possible that the Desktop Restore CMD file would not create
the new Desktop Directory structure correctly if the default drive
was not the same as the drive that contains the Desktop. Therefore,
two additional lines have been added to the Restore Command file to
insure that the correct drive is the default drive.

10. The Popup Menus did not have the Accelerator Keys noted as part
of the Menu lines. This information has been added to each line.

11. There were no Accelerator Keys for Write Window to File or Print
Window, these have also been added and are the same for all three
possible windows. An Accelerator Key for Explain has also been added.

12. It was possible to Exit from IniMaint or request a second window
Print or Write while there was already a Print or Write in progress.
In the case of the Exit or Write, several things could happen, but the
most likely was a protection exception. In the case of the Print, a
logic error 1504 would occur because an attempt was made to set a
semaphore that was already set. All of these situations have now been
fixed by the addition of code that will cause the routines involved
to wait for the current activity to be completed.

******************************* V3.0g  *******************************

The items fixed in Version 3.0g are:

1. A number of people have had problems with the Repair Objects item
in the Repair Dialog. Most of the time, user have simply selected the
Do Repair item and then Execute. The effect of this is to remove
every object from the Desktop. In order to address this problem, two
things have been done. First, the name of the item has been changed
from Repair Objects to Destroy Objects and, second, the Do Repair
button warning has been changed to make sure that the user
understands that every Object Destroyed will be removed fro the
Desktop.

2. Many, but not all, Objects have Location information in the
PM_Abstract:Objects entry for the Object in the OS2.INI file.
However, for some reason, not all of the Locations defined in the
Objects are present in the PM_Workplace:Location entry in the OS2.INI
file. This apparent inconsistency does not seem to cause a problem in
the vast majority of situations. However, it is an inconsistent
situation, so an additional Repair Item has been added to the list,
Restore Missing Location Entries, which will display any Objects with
Location information that is not in the Location entry and give the
user the ability to add the appropriate information.

3. The Variable dump did not identify the version of OS/2 being used,
which has caused confusion in certain situations, therefore, this
information is not included in the variable dump.

4. The Repair File Handles and Repair WPS Entries would not work with
versions of OS/2 prior to V2.0 because of a change in the names of
some of the Applications in the OS2SYS.INI file. Additional code has
been added to handle either name format.

5. If a music CD was in the CD-ROM drive when a Repair of the File
Handles was attempted, the Repair would abend with a 1109 Logic Error
because Sector Not Found was returned from the Query Path Info API.
Additional code has been added to handle this return and a couple of
other similar return values.

6. Once a drive was identified as a Network Drive by the Repair
Handles routine, all files and Directories on the drive were
considered to be invalid, even without checking them and even if the
Automatic Repair was set in the Defaults. The code has now been
modified so that Network drives will be handled the same as CD-ROM and
VDISK drives and in accordance with the Default settings.

7. There have been a couple of situations where the Repair
Uninstalled Printers Repair function has caused a problem with the
Desktop. In order to insure that this does not happen in the future,
this item will not work unless the IBMNULL printer is installed, thus
insuring that none of the critical Applications in the OS2SYS.INI
file will have their last Key Name deleted, thus deleting the
Application and causing a problem on the Desktop. If the IBMNULL
printer is not found, then user will be informed of it via a Message
Box and the structures that hold any Uninstalled Printer information
will be cleared and the memory freed.

8. The Restore of the Desktop Directory from the Desktop Menu item
could have worked incorrectly because the Desktop Directory could not
be found, but the user was not informed that an error had occurred.
This was caused by two problems, the first was a place in the code
where a check for an empty Desktop directory was not made and this
problem has been fixed. The second problem was that the IniClean
program would revert to the default directory when it was run without
any input parameters and this has also been fixed.

9. When the Restore Desktop Directory entry was selected from the
Desktop Menu, the CMD file that was built attempted to also unzip a
new copy of the INI files. The unzip was not successful, since the
INI files already existed, but there should not have been an attempt
to unzip them and the code to do this has been removed from the CMD
file.

10. An attempt to reset the Desktop Directory using the Desktop Menu
item would result in a SYS3175 error because of a difference in the
size of a structure that was caused by changing a system wide size
variable and not recompiling all modules. All of the modules have
been recompiled, and this fixed the problem.

11. The reset of the Desktop Directory from the Desktop Menu left two
zip file in the default directory. Additional code has been added to
insure that these files are erased once the restore and reset are
complete.

12. One additional situation was found where an attempt would be made
to delete a printer that was actually installed on the Desktop. The
problem occurs when a specific combination of Driver and Printer
names were used by the installed Printer. Additional code has been
added to identify the problem and prevent the printer from being
reported as not installed.

13. There are three places where WM_TIMER messages are processed, but
non of the code that handled these messages made a check to verify
that the Timer that issued the message was the expected one. The
effect of this was that the code would take some specific action
based on the assumption that a specific Timer event had occurred,
when it was possible that it had not occurred. The specific condition
that identified this problem was a user who had the initial dialog
turned on and had accidently erased the INIMAINT.HLP file. The user
would get the message that the Help was not available and then,
sometimes, would get a Logic Error 610 and sometimes would have no
further problems. Which event occurred depended on whether there was
a Timer message received from an unexpected Timer while the problem
with the Help was being handled. Additional code has been added to
insure that Timer messages are ignored except when they have been
caused by the appropriate Timer.

14. There were a number of readability problems with the IniHelp.TXT
file, so some changes have been made to improve the readability. Most
of the changes involve adding extra blank lines between paragraphs,
indenting lists, making sure there are two spaces after the end of
each sentence and a few other minor changes.

******************************* V3.0h  *******************************

The items fixed in Version 3.0h are:

1. There were rare situations where the Repair Location entry in the
Repair Dialog would incorrectly identify a missing location, normally
it would report it as <>. This was caused by starting the search for
the location information too early in the Object data. The code has
been changed to start the search at the correct place and also to
ignore a location of <>.

2. There were situations where the Repair Uninstalled Printers Repair
entry in the Repair Dialog would get a logic error 1128 if some of
the required printer information entries had been manually removed
from the OS2SYS.INI file. The code has been changed so that the user
will now be informed via a message box that critical information is
missing, so this type of Repair cannot be done.

3. It was possible to get a Logic Error 1112 when attempting to do
several of the Repair functions because the Open of a Network drive
was successful, but the driver for the Network drives did not
support the DosDevIOCtl API causing an Error Not Supported return
from the API. Additional code has been inserted to handle this error
return along with a number of related errors.

4. There was a problem using the IniClean program when OS/2 was
booted from a floppy because this program needed the INIMTAPI.DLL and
it was normally not available because there was no active LIBPATH.
The compile parameters for IniClean have been changed so that the RTL
is linked statically instead of dynamically, this removes the need
for the API DLL.

5. It was not clear from the documentation that the Restore CMD file
generated by the menu item on the Desktop Menu was only intended to
be run when PM and WPS were not running. Additional documentation has
been added to make this more clear.

6. It was possible to get a 1501 Logic Error when asking for an
Explain of the contents of a folder that contained an Object ID for
an Object that did not exist. An extra check has been added to fix
the problem.

7. If an attempt was made to select a new Target File in the Compare
Files Dialog, the new File Dialog appeared underneath the Compare
Dialog. This was caused by a problem with the Owner and Parent
windows of the two windows. The Owner and Parent relationship has
been changed, so that the boxes will appear correctly.

8. I was possible to dismiss the Compare Files Dialog while the
Select New Target Dialog was active. A 1305 Logic error would then
occur when the Select New Target File dialog was dismissed.
Additional code has been added to prevent the Compare Files Dialog
from being dismissed while the Select New Target File Dialog is
active.

9. When comparing two INI Files on a Key Value Level and an entry was
found in both INI files with the same Application Name and Key Name
but with Values that had different lengths, the Compare would not
mark the Key Values as being unequal. Additional code has been added
to insure that this condition will now be handled correctly.

10. If the Target File selected for a Compare was a file that did not
exist, the file would be created and the Compare would identify the
entire contents of the Source File as not being in the Target File.
Since this is nonsense, additional code has been added to identify
this condition and tell the user that a new file cannot be the Target
for a Compare.

11. If a Logic Error 617 occurred, there was not sufficient
diagnostic information in the Dump Dialog to diagnose the problem.
Additional code has been added to put the appropriate printer
information into the supplemental error text field so that problems
in this area are easier to find.

12. Both the Groups and the Compare Listboxes allowed multiple
selection, but not extended selection, where the mouse button could
be held down and the pointer dragged down the entries. Both Listboxes
have been modified to allow extended selection.

13. If the Default Printer could not be found when an attempt was
made to Print the contents of a window, a Logic Error 617 would
occur. Additional code has been added so that the user will be
informed via a Message Box that the Printer cannot be found and the
Print will simply not be done.

14. One of the most common errors is that an attempt to write to an
INI file will fail. This causes a Logic Error of 704. Frequently, the
user will understand exactly what is going on when this error occurs
and would simply continue, were they to know the exact problem.
Therefore, the Error Handling code has been modified to look for this
error, report it to the user via a Message Box and give the user the
opportunity to continue processing.

15. A number of users have had problems making relatively minor
modifications to the Extended Attributes for a Directory or File.
They have pointed out that the procedure for doing this is not at all
clear. Therefore, an additional item has been added to the On-line
Help and to the IniHelp.TXT file that explains how to make such a
change.

16. For a number of Extended Attribute functions it was possible to
select the same directory or file as both the Source and the Target.
This is illegal and can result in unexpected, but invariably bad,
results. Code has been inserted to check for this condition and, if
it occurs, inform the user and terminate the selected function.

******************************* V3.0i  *******************************

The items fixed in Version 3.0i are:

1. When the Update INI File entry was selected from the Action Menu
and the Confirm Before Update Option was selected, no confirmation
was asked for. The user will now be asked to confirm the update, if
they have selected this Option.

2. When Replacing a Key Value, the user was not asked to verify the
change, even if the Ask Before Change Option was selected. The user
will now be asked if they have selected this Option.

3. When an Application or Key Name was changed and the Ask Before
Change Option was selected, the user was not asked to verify the
change. The user will now be asked if this Option is selected.

4. When the Confirm Before Change Option was selected, a change was
made to the INI file and Cancel selected in the Confirm Dialog, it
was possible for the Confirm Dialog to appear more than one time. The
reason was that the File Updated flag was not reset when the user
cancelled the Confirm Dialog. The File Updated flag is now reset
before the Confirm Dialog appears, so it will not appear multiple
times for the same change.

5. The documentation states that the Rename or Duplicate Items on the
Action Menu will allow duplicate Application Names. However, it is
possible that a user will duplicate an Application Name without
realizing it and this could have serious and invariably bad results.
Therefore, additional code has been added to look for this condition
and, when found, the user will be informed via a message box and
given the option to terminate the operation at that point.

6. The Fast Copy Option is not needed for any version of OS/2 higher
than V2.0. However, the Options Dialog would still allow a user to
set this Option. Additional code has been placed in the Options
Dialog that will prevent this Option from being set for and Version
of OS/2 higher than 2.0 and will tell the user that the Option is not
needed for these versions.

7. The Add/Replace Key Dialog did not place the cursor in the Ascii
Text field when the Dialog was initialized, even though this was the
most likely place where information would be entered. The code has
been changed to place the cursor in the Ascii field when the Dialog
is initialized.

8. The Help for the Add or Replace Key Value Dialog only mentioned
that it was for the Replace function, not for the Add function,
therefore, all references have been changed to include a reference to
the Add function as well as Replace.

9. There was no Help entry for the Add Zero Terminator Checkbox in
the Add or Replace Key Dialog. The Help has been added.

10. The Help for the Select Group Dialog and Listing did not mention
that these items cannot be invoked directly, but are called
automatically when a Group needs to be selected. The Help has been
modified to include the additional information.

11. When displaying All Groups in the Groups Dialog, it was possible
to remove an Application from All Groups by deselecting it.
Sometimes, this is the desired action, however, it is sometimes an
error and could create a situation where the user did not remember
the groups to which the Application belonged. Therefore, the user
will now be asked to confirm that he wants to remove an Application
from All Groups if there is more than one Group. If there is only one
Group, the user will not be asked to confirm the removal, since
displaying All Groups is the same as displaying the single Group.

12. When copying the contents of one INI file to another, any
Application which already exists in the Target file will actually get
merged with the same Application in the Source file. This creates a
problem for the IniMaint Groups, so a special check has been added to
the copy code that will check for the IniMaint Group Application and
delete it from the Target file before the Source information is
copied.

13. If certain parts of the Group information got out of synch with
each other, it was possible to create an INI file that IniMaint and
SysMaint could not process. Additional checking has been added to the
code that handles the Group information to insure that any excessive
information is ignored.

14. The Repair Options Dialog did not get the focus when it initially
appeared because of how the initial dialog message was handled. The
Dialog will now get the focus correctly.

15. When the Select Repair Logging File Dialog was selected, the
Options Dialog was not large enough to contain the standard New File
Dialog, so the Options Dialog has been made wider, so it will
correctly contain the New File Dialog.

16. A Repeat Last Find entry has been added to the Find Menu. This
entry has also been added to the Popup Menus. In previous versions it
was necessary to go through a couple of steps to do a Repeat Find,
which is the most common selection.

17. The 'Global Find' entry in the Find Text Dialog has been changed
to 'Global Find Text' to make it more clear.

18. The 'Select New Desk Directory' has been changed to 'Select New
Desktop Dir.' in the Desktop Defaults Dialog.

19. A new version of the UNZIP program is now available. Since the
new version comes as a 16 bit version and a 32 bit version, the name
of the EXE file has been changed from UNZIP.EXE to UNZIP32.EXE for
the 32 bit version. Since UNZIP is used in a number of the SysMaint
Desktop functions, the code that searches for this program will now
first search for UNZIP32.EXE and, if that is not found, search for
UNZIP.EXE. The code will only fail if neither EXE is found.

20. A new Version of the ZIP program, V2.0.1, has just become
available. This version will not ZIP a file that has the System
Attribute set unless an additional parameter is supplied, -S. This is
a required parameter for OS/2 2.11, which is OS/2 2.1 with the
Service Pack, because both the OS2.INI and OS2SYS.INI files have this
Attribute turned on because they are always open. The previous
version of ZIP would ZIP files with the System Attribute on without
the -S parameter. In fact, the -S parameter is not valid for versions
of ZIP prior to V2.0.1. Therefore, it is necessary for SysMaint to
know the version of ZIP being used in order for it to know whether to
add the -S parameter to the line that runs the ZIP program. Since
there is no way to know this by looking at the program, whenever the
Backup Command file is being created, the user will be asked which
version of ZIP they are using.

******************************* V3.0j  *******************************

The items fixed in Version 3.0j are:

1. When making a Backup of the Desktop or creating the Backup CMD
file, the user is asked if they have a new or old version of the ZIP
program and one of the options is to cancel the action. If the action
is to make a Backup of the Desktop and Cancel is selected, the Backup
attempts to proceed anyway. This will no longer happen and Cancel
will actually Cancel the Action.

2. The Compare Files Dialog can be used to compare either INI files
or EA files. However, the text for the Source and Target files
specifically refer to INI files. The text has been modified to remove
the INI designation.

3. If the MultiMaint Portable Restore tried to restore certain WPS
WPProgram values with the original value set for the Object, the
Restore did not work because the original information had already
been freed. Additional code has been inserted to fix this problem.

4. When Restoring a WPProgram Object, the EXE Name and the Default
Directory would sometimes not be set. This was mostly true when the
Object was restored to a different machine, but could happen on the
same machine. Additional checks have been added to fix this problem.

5. The Message Box displayed to confirm that a Change should be made
always asked if the Key Value should be changed, even if that was not
the modified item. The text in the Message Box has been modified to
make it more general.

6. If the Copy or Move item is selected on the Extended Attribute
Menu and the Target File does not exist, the Dump Dialog will appear
with a Logic Error of 1 and a DOS Error of 206. This has been fixed.

7. When Comparing Extended Attributes, the parent of the Compare
Dialog was made to be the SysMaint Window. Therefore, if the window
was not large enough, now all of the Compare Dialog could be seen.
The Parent has been changed to the Desktop, so the entire dialog can
be seen, no matter how large the SysMaint window is.

8. In the Variable Data Entry Dialog, it was necessary to tab to the OK
Button and then hit Enter in order to dismiss the Dialog. Additional
code has been put in this dialog to check for the Enter Key and, if
the window with the focus is still the Entry Field, the Dialog will
act as if the Enter Button was selected.

9. There were a couple of situations where a Logic Error would set
the Error Code correctly, but the Dump Dialog would not appear. The
reason for this was that there were a few situations where some
windows were not cleaned up before an attempt was made to display the
Dump Dialog. Code has been inserted to insure that these windows are
cleaned up correctly.

10. The EA validation code would mark a text string EA as invalid if
it contained a CR or LF character. This is an error, since many names
of Objects on the Desktop are multiline entries and will contain on
or both of these characters. The problem has been fixed by adding
code to check for these two characters when examining a text string
and treating them as valid characters.

11. Many of the Dialogs did not have a Default Button that would be
executed when the Enter Key was pressed. This has been added to all
of the Dialogs for which it is appropriate.

12. If the MultiMaint Portable Backup found a Shadow Object and got a
valid pointer to the Object being Shadowed, but was not able to find
the original Object, a Logic Error 1737 would occur. Since this is a
possible condition and simply indicates that the Shadowed Object
does not exist, the code has been changed to treat this as an Orphan
Shadow.

13. There was a problem with the MultiMaint Portable backup where the
Real Name for the Desktop would be recorded in the *.WPS file twice,
once with the incorrect Application Name. This would cause a problem
when the Restore was attempted because the incorrect entry would not
have a Level Key Name and would cause an error while attempting to
load the Restore Window. The problem has been fixed.

******************************* V3.0k  *******************************

The items fixed in Version 3.0k are:

1. The Accelerator Keys were added for the MultiMaint items on the
Desktop Menu.

2. The Help for the Portable Backup and Restore was added to the Help
file.

3. There were conditions where selecting Cancel in the New File
Dialog while selecting a new Target File for the Compare would cause
a Protection Exception because the default filename was placed in a
structure even if the default filename was a NULL pointer. The
default will not be placed in the structure unless it is verified
that the user has actually selected a new file.

4. The Deskman/2 Setup code could leave a reference in
PM_Workplace:Location that did not exist in PM_Abstract:Objects. The
Inimaint Repair would flag this an invalid entry and remove it.
However, the entry would return because it is needed by Deskman/2.
Additional code has been added to the Repair WPS Entries routines to
look for this special entry and to treat it as a valid entry if the
user has turned on the Option to Bypass Known Errors in the Repair
Options Dialog.

5. There were situations where the variable dump would not contain
all of the required information for very large Desktops because the
number of lines of any one kind of data was terminated at 1,000
lines. This limit has been raised to 5,000 lines.

6. There was at least one condition where an Object that was restored
by MultiMaint would be positioned correctly on the Desktop, but the
position would not be correct after the Desktop was reset. Additional
code has been added to check for the condition and insure that the
Object Instance information is saved before the Desktop is reset.

7. Certain Objects were not Restored to the correct position by the
MultiMaint Restore. This was caused by the position information being
overwritten by the default position information. An additional check
has been added so that the valid position information will not get
overlaid.

8. If the Directory specified for the Portable Backup did not exist,
then the Portable Backup would report that the INI files could not be
copied and would then popup the Dump Dialog with a generic Logic
Error code of 1. The routine has been modified so that the user will
be informed, after the first copy does not succeed, that the Backup
cannot be done because the INI files could not be copied.

9. There was a condition where the EA information from a number of
the EA functions could end up in the incorrect file. Specifically,
the current INI file would end up with the EA information rather than
have it placed in a separate file. There were a number of things that
had to occur in order to make this happen. An additional check has
been added to the code that selects the Target file for these EA
functions so that the problem will not reoccur.

10. There were some situations where the Repair File Handles would
create a File Handle Structure that was not valid and this would
result in Desktop corruption upon rebooting OS/2. The problem only
occurred with HPFS Filenames and required that the Filename contain a
comma, be a file that did not exist and in a directory that did not
exist. The Repair code has been changed so that an invalid Driectory
will force all Files and Subdirectories to be invalid. A side benefit
of this change is that the File Handle Structure is now loaded more
quickly, especially if there are a number of invalid Directories.

11. If an attempt was made to Restore an Object whose Class was not
one of the standard Classes, such as the Desktop when ExtendedDesktop
was being used, and the Object was not in the first group of Objects
being Restored, the Restore would not work because of a data error
10. The reason this occurred is because the structure that identified
the non-standard Classes was freed after the first set of Objects
were Restored. The code has been changed so the structure will only
get freed after all of the Restores are done.

12. There are a number of Classes of Objects that use unusual
identifiers to save instance information that is not normally saved
by the standard WPS methods. While some of these Classes were handled
correctly, unknown Classes were not handled. Addtional code has been
added to handle these situations correctly.

13. When there were substitutions needed for the proper handling of
Restoring Instance information for non standard Classes, the
substitutions were not recorded in the WPS Logging file, thus
making it difficult to verify how these classes were handled.
Additional code has been added to log this information.

******************************* V3.0l  *******************************

The items fixed in Version 3.0l are:

1. There were situations where MultiMaint would reset the Desktop
when it was not necessary. The setting of the Reset flag has been
moved so that the reset will not occur unless it is necessary.

2. There was a condition where the Repair Dialog could get a SYS3175
error if the fully qualified name of a Directory and/or a File was
very close to the maximum number of characters. The size of the
variable that holds this data and all variables that hold simliar
data were expanded, where necessary, in order that this problem will
not occur again.

3. The new version of ZIP will not ZIP files that have the System
Attribute on without a special parameter. The same parameter is
considered an error by a previous version of ZIP. This had been
handled by asking the user which version of ZIP they had each time
the Snapshot Backup CMD file was created. Many users found this
annoying. The creation of the Backup CMD file has now been changed so
that the System Attribute will simply be turned off before an attempt
is made to ZIP the OS2.INI or OS2SYS.INI files. The attribute will be
left off, since it does not cause any problems and will get reset at
the next Boot anyway.

4. Folders whose WPS Class was not the standard WPFolder Class would
not get their contents saved except for the very first time they were
encountered. The routine which identifies which objects are Folders
or have a WPS Class that is derived from WPFolder has been changed to
fix this problem.

5. Still another problem was found in the Repair Uninstalled Printers
routine and fixed.

6. There were a couple of places in the code where an Application/Key
Name combination with a one byte Key Value would be interpreted as a
missing Key Name. This was code that was left over from an old
problem with one of the Prf API's. All of the affected areas have
been updated so that only a true return of Zero from the appropriate
API will be interpreted as a missing Key Name/Value combination.

7. An additional Option has been added to the Desktop Default Dialog
that will allow the user to specify whether they want the System
Attribute reset whenever the Backup CMD File is rebuilt. This Option
only applies to OS/2 V2.1 with the SP and beyond. In order to insure
that the User makes a decision on this issue, the first time that a
Backup CMD file is created under the appropriate version of OS/2, the
user will be asked how they want to handle this area. Once this
question is answered a single time and the Option is set, based on
the answer, the user will not be asked the question a second time,
but can always modify the Option by using the Desktop Defaults
Dialog.

8. There was a problem with the position of Objects Restored to the
Desktop would not be preserved once the Desktop was reset. This
problem occurs on Desktops that have installed the OS/2 V2.1 SP and
beyond. In the process of working on this problem, it was discovered
that the Reset of the Desktop after Restoring Objects with the Safe
Restore Box unchecked was not necessary for this version of OS/2.
Therefore, the code has been modified so that the Reset of the
Desktop will not be done for OS/2 2.1 SP and beyond.

9. Solving the problem described in 8. above created a new problem for
the situations where an Object is Restored to the Desktop, the Class
of the Restored Object replaces an existing Class and the new Class
is not already registered.  In this case, the replacement will not be
effective until the Desktop is Shutdown and OS/2 is Rebooted.
Therefore, code has been added to identify when the Shutdown should
occur and will either do the Shutdown or ask the user if they want
the Shutdown to be done, based on a new Option in the Portable
Defaults Dialog.

10. The best thing to do after a number of Objects have been Restored
via the Portable Restore is to immediately Shutdown the Desktop and
Reboot OS/2. Additional code has been added to ask the user if they
want this done, assuming that the condition described in 9. above
does not exist. This feature can be truned off via a new Option in
the Portable Defaults Dialog.

11. For versions of OS/2 prior to 2.1 with the SP, the Desktop would
get Reset if certain kinds of Restores were done. The user had no
control over whether this was doen or not. In order to give the user
additional control, a new Option has been added to the Portable
Backup Defaults Dialog that will allow the user to decide whether the
Reset should be done or not.

12. At least one situation has occurred where the Hidden Attribute
was left on the OS2SYS.INI file. In order to prevent this from
creating a problem with the Snapshot Desktop Backup, all of the lines
in the CMD files that remove the System Attribute have been changed
to also remove the Hidden Attribute. Since the Hidden Attribute is
virtually never set, this will have no effect except in those
situations where it is critically important.

13. Since it is easy to set file associations in OS/2 2.0 and beyond,
the entry on the File Menu to do this, which was included because of
problems with OS/2 V1.3, has been removed.

14. There were a number of places where warnings were issued to users
before various functions were performed. While these warnings are
important for most users, there are a number os experienced users who
are aware of the issues involved with some or all of the various
functions that were the subject of the warnings. In these cases, the
users felt that the warnings were in the way and an irritation. In
order to address this, additiional options have been added to the
Options Dialog, the Repair Options Dialog and the Desktop Defaults
Dialog that will give the user the ability to r=turn off the
following warnings:
   1. Change the User and/or System INI file
   2. Repair the File Handles
   3. Destroy Desktop Objects
   4. Reset Desktop Directory
   5. Restore the Desktop INI Files
   6. Build the Desktop Restore CMD File
   7. Reset the Desktop WPS ID

******************************* V3.0m  *******************************

The items fixed in Version 3.0m are:

1. There was an additional place in the Repair File Handles and
Repair WPS Entries where a Not Ready Condition on a drive would
result in a logic error 1109 rather than the drive being marked as
not accessable. Code has been added to fix the condition.

2. In order to make it easier to handle the Defaults for the Portable
Restore, an additional button has been added to the bottom of the
dialog that will allow the user to bring up the Defaults Dialog while
the Portable Restore Dialog is active and change the defaults without
having to dismiss the Portable Restore Dialog, change the defaults
and then restart the Restore.

3. To aid in diagnosing problems a Dump button has been added to the
Portable Restore Defaults Dialog. This alone with the change above,
will make it possible to obtain a dump while the Portable Restore is
active.

4. One of the new Options in the Portable Defaults Dialog would get
set incorrectly because of an incoorect variable name. The code has
been corrected.

5. A new Option has been added to the Portable Defaults Dialog,
Select Lower Level. If this Option is checked, then selecting or
deselecting any entry in the Portable Restore Dialog will
automatically make all lower level entries have the same selection
state. For example, if this Option is checked and a Folder is
Selected for Restore, then all items in the Folder will also be
selected. This makes it much easier to Restore an Entire Folder and
its contents, since everything can be selected with one click of the
mouse.

6. The sequence of the entries in the Repair Dialog drop down list
has been changed to put the Repair Options in a sequence which more
closely reflects their probability of being selected by the user.

7. Two new Types of Repair have been added, Do All WPS, PM and File
Handle Repairs and Do All Individual INI File Repairs. Each of these
is a short hand way to do a group of Repairs with a single selection
and are designed to make it easier for the experienced user to use
the various Repair functions.

8. Additional text has been added to the Help entry for What does
Repair Do. The purpose of the addtional explanation is to make a
better distinction between those kinds of Repairs that are System
level Repairs and will always do the same thing, no matter what is
the current INI file, and the Individual File Repairs that apply only
to the current INI file. Many users have been confused by this
difference and thought that it was necessary to have the OS2.INI file
as the current file when the WPS, PM or File Handle Repairs were
done. In addition, some users would do the System Level Repairs more
than one time, with different INI files as the current file. While
this did not do any damage, it was a waste of the user's time, so an
attempt has been made to make this area more clear.

9. In certain Network Printer situations, the Delete Unused Printers
Repair would attempt a compare using a NULL pointer, thus causing a
SYS3175 Abend. An additional check has been inserted to fix this
problem.

10. The various documentation files and the Online Help were not
clear about the fact that IniMaint is a Shareware program, but the
other applications, SysMaint and MultiMaint, are not and can only be
tried by registering them. A number of changes have been made to all
the file affected to insure that this difference is as clear as
possible to all users.

11. The temporary files left by WPSBackup have been removed from the
code that bypasses standard errors. These references should be
removed from the File Handle Structure, since they do not exist at
the time the Repair is done.

12. There were some problems with the code that tested the User and
System INI files to see if they could be written to. One problem
would cause an immediate logic error if the user had already been
informed of the problem and had chosen not to do anything about it.
However, there were a couple of other combinations that could also
cause an error. The code has been substantially reworked so that it
will not operate as expected.

13. It was possible, although fairly hard, to get the window size
small enough that it would appear that the main window was not
visible. It was also possible to change the position of the window so
that it was not visible on the screen. Changes have been made so that
neither of these conditions can now be set.

14. A new entry has been added to the SysMaint Extended Attribute
Menu: Delete. Selecting this entry is exactly the same as Split in
that the Extended Attributes are deleted from the source
Directory/Files selected. However, the EA's are not saved in another
file so that thye can be reattached at a later time. This item was
added for two reasons. First, it was not clear to many users that the
Extended Attributes could be deleted. Second, there are occasions
where all the user wants to do is delete the EAs and has no desire or
need to save them.

15. If there were a large number of Printers in the OS2SYS.INI file,
the Delete Unused Printers could have a problem with the reallocation
of a memory area causing a SYS3175 filling the Repair Window. The
code has been changed to increase the size of the memory area so the
error will no long occur.

16. Improvements have been made in the Repair Directory and File
Handle code so that it will handle Directories and Files on Network
Drives better. The changes will now still look for Directories and/or
Files on Network Drives that cannot be opened by the DosOpen API.

17. There were some VDISK devices which were not correctly recognized
since they appeared with a floppy drive type. An additional check has
been inserted in the code that handles the floppy drives so that
these drives will be correctly identified as VDISK drives.

18. A new Option has been added to the Desktop Defaults Dialog,
Do Restore CMD when Backup. If this Option is checked then the
Desktop Restore CMD file will always be generated whenever a Desktop
Backup is made.

19. The ability to Backup files that are not an intergral part of the
Desktop, Supplemental Backup, has been added to the Desktop
capabilities of SysMaint. Adding this capability involves a number of
new entries on the Menu, including an item to manage the list of
files to be included in the Supplemental Backup, the ability to
Create the Backup and Restore CMD Files and the entries to do the
actual Suppplemental Backup and Restore. In addition, an Option has
been added to the Desktop Defaults Dialog that will cause the
Supplemental Backup and Restore to be included with the standard
Desktop Backup and Restore.

20. The Desktop Restore CMD file has been changed to improve the
reliability of the Restore by adding a parameter to the UNZIP line
that will force the file to be Restored to the correct drive no
matter which drive is the default drive.

21. The Deleted Unused Printers code would not identify some printers
as not being installed if the information in the OS2SYS.INI file was
consistant. Code has been added to check the list of valid printers
against the Printer Object information that is in the INI files. Even
if the printer information is consistant, a printer will be marked as
uninstalled if there is no Printer Object information for the
Printer.

22. A additional check has been added to the Repair File Handles code
that will identify the situations where a drive letter for a specific
drive gets replaced with a filename. When this happens, all of the
files on the drive are identified by WPS as being in the Directory
and the File Handles cannot be used. This condition will be identifed
as an Invalid Root NODE and can be fixed by the File Handle Repair
routine.

23. If a File Handle was correctly identified as being on a Network,
CDROM or VDISK drive and there was a WPS OBject associated with the
File Handle, the WPS Repair code would mark the Object as being
invalid. The WPS Repair code has been changed so that it will no
longer treat File Handles as invalid locations for WPS Objects in
these situations.