home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DP Tool Club 15
/
CD_ASCQ_15_070894.iso
/
vrac
/
zhint594.zip
/
VFDI
< prev
next >
Wrap
Text File
|
1994-03-29
|
1KB
|
32 lines
3-24-94 Voice Quality
To get the best voice quality with the Internal Voice/faxmodem, in
Bitfax go to SETUP, then VOICE and set Baud Rate to 38,400 and Bit Sampling
to 3. The defaults are 19,200, 2 bits for externals (which cannot support 3
bits through the serial port). This will use about 1/3 more disk space per
message. Also the Windows comport driver cannot handle over 19,200. If you
are using Windows, get a new driver like Turbocom.
If messages get cut in the middle, increase the Silence Threshold in
voice setup. Make sure cable are screwed in, modem screwed down mother
board grounded etc, to avoid static noises in recordings.
Unfortunately because of the limitations of a serial port and the
Voice/faxmodem, you cannot set the paramters to get the best quality with
the external Voice/faxmodem and it may sound a bit scratchy.
Don Hinds - Zoom Tech
##include=c:\text\signa.tif