DP Tool Club 14

home *** CD-ROM | disk | FTP | other *** search

/ DP Tool Club 14 / CD_ASCQ_14_0694.iso / maj / 4266 / interrup.c < prev next >

Wrap

Text File | 1994-04-05 | 236KB | 6,647 lines

Interrupt List, part 3 of 11 This compilation is Copyright (c) 1989,1990,1991,1992,1993,1994 Ralf Brown --------B-1580------------------------------- INT 15 C - OS HOOK - DEVICE OPEN (AT,XT286,PS) AH = 80h BX = device ID CX = process ID CF clear Return: CF clear if successful AH = 00h CF set on error AH = status 80h invalid command (PC,PCjr) 86h function not supported (XT) Note: this function should be hooked by a multitasker which wishes to keep track of device ownership; the default BIOS handler merely returns successfully SeeAlso: AH=81h,AH=82h --------b-1580------------------------------------ INT 15 - HUNTER 16 - GET/SET BATTERY CAPACITY (APM) AH = 80h AL = function 00h get Return: AL = capacity (500mA + AL * 50mA, max 40 = 2500mA) else set BL = battery capacity (same as AL above) SeeAlso: AH=61h"HUNTER",AH=81h"HUNTER" --------B-1581------------------------------- INT 15 C - OS HOOK - DEVICE CLOSE AH = 81h BX = device ID CX = process ID CF clear Return: CF clear if successful AH = 00h CF set on error AH = status (see AH=80h) Note: this function should be hooked by a multitasker which wishes to keep track of device ownership; the default BIOS handler merely returns successfully SeeAlso: AH=80h,AH=82h --------b-1581------------------------------------ INT 15 - HUNTER 16 - CONTROL POWER OUTPUT AH = 81h AL = new state of power output (00h off, nonzero on) Desc: turn the +5V low power output on or off SeeAlso: AH=80h"HUNTER" --------B-1582------------------------------- INT 15 C - OS HOOK - PROGRAM TERMINATION AH = 82h BX = process ID CF clear Return: CF clear if successful AH = 00h CF set on error AH = status (see AH=80h) Notes: closes all devices opened by the given process ID with function 80h this function should be hooked by a multitasker which wishes to keep track of device ownership; the default BIOS handler merely returns successfully SeeAlso: AH=80h,AH=81h --------b-1582------------------------------------ INT 15 - HUNTER 16 - SOUND OUTPUT AH = 82h DX = length (duration in seconds = DX * 666670 / frequency) BX = pitch (see below) Desc: Sound the tone specified in BX for the duration in DX SeeAlso: AX=1019h Values for pitch: BX(dec) Note Frequency BX(dec) Note Frequency 425 G 1568.000 1515 A 440.000 451 F# 1479.503 1605 G# 415.307 477 F 1396.900 1701 G 392.000 506 E 1318.500 1802 F# 369.998 536 D# 1244.523 1909 F 349.230 568 D 1174.700 2022 E 329.630 601 C# 1108.749 2143 D# 311.127 637 C 1046.500 2270 D 293.660 675 B 958.770 2405 C# 277.183 715 A# 932.329 2548 MID C 261.630 758 A 880.000 2700 B 246.940 803 G# 830.609 2860 A# 233.081 850 G 783.990 3030 A 220.000 901 F# 739.990 3210 G# 207.654 954 F 698.460 3401 G 196.000 1011 E 659.260 3604 F# 184.996 1071 D# 622.257 3818 F 174.610 1135 D 587.330 4045 E 164.810 1203 C# 554.365 4286 D# 155.560 1274 C 523.250 4540 D 146.830 1350 B 493.880 4668 C# 142.827 1430 A# 466.162 4803 C 138.810 --------B-1583------------------------------- INT 15 - BIOS - SET EVENT WAIT INTERVAL (AT,PS50+) AH = 83h AL = subfunction 00h set interval CX:DX = microseconds to delay ES:BX -> byte whose high bit is to be set at end of interval 01h cancel wait interval Return: CF set on error or function already busy AH = status 80h invalid command (PC,PCjr) 86h function not supported (XT and later) CF clear if successful Notes: the resolution of the wait period is 977 microseconds on most systems because most BIOSes use the 1/1024 second fast interrupt from the AT real-time clock chip which is available on INT 70 IBM AT 1/10/84 BIOS ignores AL and always performs subfunction 00h SeeAlso: AH=41h,AH=86h,INT 70 --------b-1583------------------------------------ INT 15 - HUNTER 16 - CONTROL SCREEN SYNCHRONISATION AH = 83h AL = state of LCD window (00h disabled, nonzero enabled) Desc: Enable/disable the facility where the displayed window tracks the cursor output to keep the focus visible --------B-1584------------------------------- INT 15 - BIOS - JOYSTICK SUPPORT (XT after 11/8/82,AT,XT286,PS) AH = 84h DX = subfunction 0000h read joystick switches Return: AL bits 7-4 = switch settings 0001h read positions of joysticks Return: AX = X position of joystick A BX = Y position of joystick A CX = X position of joystick B DX = Y position of joystick B Return: CF set on error AH = status 80h invalid command (PC,PCjr) 86h function not supported (other) CF clear if successful Notes: if no game port is installed, subfunction 0000h returns AL=00h (all switches open) and subfunction 0001h returns AX=BX=CX=DX=0000h a 250kOhm joystick typically returns 0000h-01A0h --------b-158400---------------------------------- INT 15 - HUNTER 16 - GET DISKETTE PORT AX = 8400h BH = Drive (0: A:, 1: B:) Return: AL = Port (0: COM1, >0: COM2) Desc: return the COM port used for the floppy drive SeeAlso: AX=8401h --------b-158401---------------------------------- INT 15 - HUNTER 16 - SET DISKETTE PORT AX = 8401h BH = Drive (0: A:, 1: B:) BL = Port (0: COM1, >0: COM2) Desc: set the COM port used for the floppy drive SeeAlso: AX=8400h --------B-1585------------------------------- INT 15 C - OS HOOK - SysRq KEY ACTIVITY (AT,PS) AH = 85h AL = SysRq key action (00h pressed, 01h released) CF clear Return: CF clear if successful AH = 00h CF set on error AH = status (see AH=84h) Notes: called by keyboard decode routine the default handler simply returns successfully; programs which wish to monitor the SysRq key must hook this call SeeAlso: INT 09 --------b-158500---------------------------------- INT 15 - HUNTER 16 - RESTORE POWER MENU (APM) AX = 8500h Desc: restore the standard power menu SeeAlso: AX=8501h"HUNTER" --------b-158501---------------------------------- INT 15 - HUNTER 16 - SET POWER MENU (APM) AX = 8501h BL = user software interrupt number Desc: install an alternate power menu routine SeeAlso: AX=8500h"HUNTER" --------B-1586------------------------------- INT 15 - BIOS - WAIT (AT,PS) AH = 86h CX:DX = interval in microseconds Return: CF clear if successful (wait interval elapsed) CF set on error or AH=83h wait already in progress AH = status (see AH=84h) Note: the resolution of the wait period is 977 microseconds on most systems because most BIOSes use the 1/1024 second fast interrupt from the AT real-time clock chip which is available on INT 70 SeeAlso: AH=41h,AH=83h,INT 1A/AX=FF01h,INT 70 --------b-1586------------------------------------ INT 15 - HUNTER 16 - GET/SET SCREEN ATTRIBUTE TABLE AH = 86h AL = function (00h get, nonzero set) BX = 1234h DS:SI -> 256-byte Attribute buffer Note: In text modes each character has its attribute byte XOR'd with the corresponding byte in the attribute table. If the attribute is 15, 15 is XOR'd with Table[15] --------B-1587------------------------------- INT 15 - SYSTEM - COPY EXTENDED MEMORY AH = 87h CX = number of words to copy (max 8000h) ES:SI -> global descriptor table (see below) Return: CF set on error CF clear if successful AH = status (see below) Notes: copy is done in protected mode with interrupts disabled by the default BIOS handler; many 386 memory managers perform the copy with interrupts enabled this function is incompatible with the OS/2 compatibility box SeeAlso: AH=88h,AH=89h,INT 1F/AH=90h Values for status: 00h source copied into destination 01h parity error 02h interrupt error 03h address line 20 gating failed 80h invalid command (PC,PCjr) 86h unsupported function (XT,PS30) Format of global descriptor table: Offset Size Description 00h 16 BYTEs zeros (used by BIOS) 10h WORD source segment length in bytes (2*CX-1 or greater) 12h 3 BYTEs 24-bit linear source address, low byte first 15h BYTE source segment access rights (93h) 16h WORD zero 18h WORD destination segment length in bytes (2*CX-1 or greater) 1Ah 3 BYTEs 24-bit linear destination address, low byte first 1Dh BYTE destination segment access rights (93h) 1Eh 18 BYTEs zeros (used by BIOS) --------b-1587------------------------------------ INT 15 - HUNTER 16 - SET INT 72h VECTOR AH = 87h DS:DX = new service routine Desc: set the INT 72h vector which is called in 2 cases: - when the machine is about to turn off or reboot, INT 72h is called with AH=0 - when the machine is powering up INT 72h is called with AH=01h Note: the actual INT 72h vector must also be changed with INT 21/AH=25h --------B-1588------------------------------- INT 15 - SYSTEM - GET EXTENDED MEMORY SIZE (286+) AH = 88h Return: CF clear if successful AX = number of contiguous KB starting at absolute address 100000h CF set on error AH = status 80h invalid command (PC,PCjr) 86h unsupported function (XT,PS30) Notes: TSRs which wish to allocate extended memory to themselves often hook this call, and return a reduced memory size. They are then free to use the memory between the new and old sizes at will. the standard BIOS only returns memory between 1MB and 16MB; use AH=C7h for memory beyond 16MB not all BIOSes correctly return the carry flag, making this call unreliable unless one first checks whether it is supported through a mechanism other than calling the function and testing CF SeeAlso: AH=87h,AH=C7h --------b-1588------------------------------------ INT 15 - HUNTER 16 - GET POWER UP KEYS AH = 88h Return: AH = 00h BX = column CL = row SeeAlso: AH=71h --------B-1589------------------------------- INT 15 - SYSTEM - SWITCH TO PROTECTED MODE AH = 89h BL = interrupt number of IRQ0 (IRQ1-7 use next 7 interrupts) BH = interrupt number of IRQ8 (IRQ9-F use next 7 interrupts) ES:SI -> GDT for protected mode offset 0h null descriptor (initialize to zeros) 8h GDT descriptor 10h IDT descriptor 18h DS 20h ES 28h SS 30h CS 38h uninitialized, used to build descriptor for BIOS CS Return: CF set on error AH = FFh error enabling address line 20 CF clear if successful AH = 00h in protected mode at specified address Notes: BL and BH must be multiples of 8 the protected-mode CS must reference the same memory as the CS this function is called from because execution continues with the address following the interrupt call SeeAlso: AH=87h,AH=88h,INT 67/AX=DE0Ch --------b-158900---------------------------------- INT 15 - HUNTER 16 - GET POWER MODE AX = 8900h Return: AH = 00h BL = current power mode 00h Standard Power Mode (SPM) 01h Advanced Power Mode (APM) SeeAlso: AX=8901h --------b-158901---------------------------------- INT 15 - HUNTER 16 - SET POWER MODE AX = 8901h BL = new mode 00h Standard Power Mode (SPM) 01h Advanced Power Mode (APM) Return: AH = 00h SeeAlso: AX=8900h --------b-158A------------------------------------ INT 15 - HUNTER 16 - CONTROL POWER INPUT (SPM) AH = 8Ah AL = new state of Power Input (00h disabled, nonzero enabled) SI = 1234h DI = 5678h Return: AH = status 00h success FFh failure Desc: Enable or disable Power Input. When Power Input is disabled the AC adaptor will neither charge the batteries nor supply power to the Hunter 16. Disable Power Input if using Alkaline batteries. --------b-158B------------------------------------ INT 15 - HUNTER 16 - GET/SET CHARGER TEMPERATURE OVERRIDE AH = 8Bh AL = function 00h get Return: BH = Maximum charging temperature Temp = -20 + (n * 0.63) degrees Centigrade BL = Minimum charging temperature else set BH = maximum charging temperature (as above) BL = minimum charging temperature (as above) Return: AH = status 00h success FFh failure Desc: get/set the temperature interval within which the charger should operate --------b-158C------------------------------------ INT 15 - HUNTER 16 - GET/SET POWER SAVE ENTRY FLAG AH = 8Ch AL = function 00h get Return: BX = which operations disable power save (see below) else set BX = which operations should disable power save (see below) SeeAlso: AH=8Dh Bitfields for operations disablign power save: Bit(s) Description 0 INT 10h prevents power save 1 INT 13h prevents power save 2 INT 14h prevents power save 3 INT 15h prevents power save 4 INT 1Ah prevents power save 5 INT 21h prevents power save 6 direct write to video RAM prevents power save 7 access to 8250 UART prevents power save 8 access to 8253 (Sound) prevents power save --------b-158D------------------------------------ INT 15 - HUNTER 16 - GET/SET BOOST CHARGE (SPM) AH = 8Dh AL = function 00h get Return: AL = Fast Charge state (00h prevented, else allowed) nonzero set BH = Fast Charge state (00h prevent, nonzero allow) Return: AH = status 00h success FFh failure Desc: control whether Fast Charging (200ma rather than 70ma) is allowed SeeAlso: AH=8Ch --------B-1590------------------------------- INT 15 - OS HOOK - DEVICE BUSY (AT,PS) AH = 90h AL = device type (see below) ES:BX -> request block for type codes 80h through BFh CF clear Return: CF set if wait time satisfied CF clear if driver must perform wait AH = 00h Notes: type codes are allocated as follows: 00-7F non-reentrant devices; OS must arbitrate access 80-BF reentrant devices; ES:BX points to a unique control block C0-FF wait-only calls, no complementary INT 15/AH=91h call floppy and hard disk BIOS code uses this call to implement a timeout; for device types 00h and 01h, a return of CF set means that the timeout expired before the disk responded. this function should be hooked by a multitasker to allow other tasks to execute while the BIOS is waiting for I/O completion; the default handler merely returns with AH=00h and CF clear SeeAlso: AH=91h,INT 13/AH=00h,INT 17/AH=00h,INT 1A/AH=83h Values for device type: 00h disk 01h diskette 02h keyboard 03h PS/2 pointing device 21h waiting for keyboard input (Phoenix BIOS) 80h network FBh digital sound (Tandy) FCh disk reset (PS) FDh diskette motor start FEh printer --------B-1591------------------------------- INT 15 - OS HOOK - DEVICE POST (AT,PS) AH = 91h AL = device type (see AH=90h) ES:BX -> request block for type codes 80h through BFh CF clear Return: AH = 00h Note: this function should be hooked by a multitasker to allow other tasks to execute while the BIOS is waiting for I/O completion; the default handler merely returns with AH=00h and CF clear SeeAlso: AH=90h --------b-15BC------------------------------- INT 15 - Phoenix 386 BIOS - DETERMINE CPU SPEED FOR DELAY LOOPS AH = BCh Return: CF clear (Phoenix 1.10 10a) BYTE 0040h:00B0h set to delay loop count (Dell 4xxDE BIOS A11) WORD 0040h:00ECh set to delay loop count Note: this function reads system timer channel 0 twice, then does calculations on the returned values to determine the delay loop counter needed by the BIOS for beeps and floppy timeouts --------E-15BF00----------------------------- INT 15 - Rational Systems DOS/16M - ??? AX = BF00h ??? Return: ??? Note: under DESQview/X 1.02 DVDOS4GX.DVR, this call is identical to AX=BF02h SeeAlso: AX=BF02h --------E-15BF01----------------------------- INT 15 - Rational Systems DOS/16M - ??? AX = BF01h ??? Return: ??? Notes: under DESQview/X 1.02 DVDOS4GX.DVR, this call is identical to AX=BF02h called by DOS/4GW SeeAlso: AX=BF00h,AX=BF02h --------E-15BF02DX0000----------------------- INT 15 - Rational Systems DOS/16M - INSTALLATION CHECK AX = BF02h DX = 0000h Return: DX = nonzero if installed DX:SI -> XBRK structure (see below) Note: this function is also supported by DOS/4G SeeAlso: AX=BF01h,AX=BFDCh,AX=BFDEh/BX=0000h SeeAlso: INT 21/AH=FFh/DH=0Eh,INT 2F/AH=A1h,INT 2F/AX=F100h,INT 2F/AX=FBA1h Format of XBRK structure: Offset Size Description 00h DWORD linear address of first available byte 04h DWORD linear address of last available byte + 1 ??? 08h DWORD real-mode address of XBRK structure??? 0Ch DWORD ??? 10h 2 BYTEs ??? 12h WORD segment of ??? 14h 8 BYTEs ??? 1Ch 512 BYTEs protected-mode IDT 21Ch N BYTEs protected-mode GDT --------E-15BF03----------------------------- INT 15 - Rational Systems DOS/4GW - UNINSTALL??? AX = BF03h BX = PSP segment of extender ??? Return: ??? Note: if BX is not the PSP segment of the extender, it passes the call down the INT 15 chain; this allows nested instances of the extender SeeAlso: AX=BF06h --------E-15BF04----------------------------- INT 15 - Rational Systems DOS/4GW - ??? AX = BF04h BX = PSP segment of extender Return: nothing??? Notes: if BX is not the PSP segment of the extender, it passes the call down the INT 15 chain; this allows nested instances of the extender grabs INT 2Fh and installs handlers for INT 2F/AX=1605h-1607h SeeAlso: INT 2F/AX=1607h/BX=22C0h --------E-15BF05----------------------------- INT 15 - Rational Systems DOS/4GW - INITIALIZE PROTECTED-MODE INTERFACE AX = BF05h BX = PSP segment of extender Return: nothing??? Notes: if BX is not the PSP segment of the extender, it passes the call down the INT 15 chain; this allows nested instances of the extender calls INT 67/AX=DE01h if ??? --------E-15BF06----------------------------- INT 15 - Rational Systems DOS/4GW - ??? AX = BF06h BX = PSP segment of extender ??? Return: ??? Note: if BX is not the PSP segment of the extender, it passes the call down the INT 15 chain; this allows nested instances of the extender SeeAlso: AX=BF03h --------E-15BFDCDX0000----------------------- INT 15 - Rational Systems DOS/4GW - INSTALLATION CHECK AX = BFDCh DX = 0000h SI = 0000h Return: DX = nonzero if installed DX:SI -> XBRK structure (see AX=BF02h) SeeAlso: AX=BF02h --------E-15BFDEBX0000----------------------- INT 15 - DESQview/X - DVDOS4GX.DVR - INSTALLATION CHECK AX = BFDEh BX = 0000h Return: AX = ??? (0003h) BX = FFFFh SeeAlso: AX=BF02h --------E-15BFDEBX0001----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - GET PROCESS MANAGER NAME AX = BFDEh BX = 0001h Return: BX = 0000h (success) CX:DX -> name of process manager executable SeeAlso: AX=BFDEh/BX=0000h --------E-15BFDEBX0002----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - SET ??? AX = BFDEh BX = 0002h CX:DX -> ??? Return: BX = 0000h (success) SeeAlso: AX=BFDEh/BX=0000h,AX=BFDEh/BX=0003h --------E-15BFDEBX0003----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - GET ??? AX = BFDEh BX = 0003h Return: BX = 0000h (success) CX:DX -> ??? SeeAlso: AX=BFDEh/BX=0000h,AX=BFDEh/BX=0002h --------E-15BFDEBX0004----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - ??? AX = BFDEh BX = 0004h CL = ??? Return: BX = 0000h (success) CX:DX -> XBRK structure (see AX=BF02h) SeeAlso: AX=BFDEh/BX=0000h --------E-15BFDEBX0005----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - ??? AX = BFDEh BX = 0005h CX = new value for ??? Return: BX = 0000h (success) AX = old value of ??? DS:SI -> ??? (if AX nonzero on return) ES:DI -> ??? (if AX zero on return) Note: called by DOS4GW.EXE SeeAlso: AX=BFDEh/BX=0000h --------E-15BFDEBX0006----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - GET ??? AX = BFDEh BX = 0006h Return: BX = 0000h (success) AH = interrupt number??? (BEh) CX:DX = ??? SeeAlso: AX=BFDEh/BX=0000h,AX=BFDEh/BX=0007h,INT BE"DESQview" --------E-15BFDEBX0007----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - SET ??? AX = BFDEh BX = 0007h CX:DX = ??? Return: BX = 0000h (success) SeeAlso: AX=BFDEh/BX=0000h,AX=BFDEh/BX=0006h --------E-15BFDEBX0008----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - ??? AX = BFDEh BX = 0008h CX = segment of ??? DS = ??? Return: BX = status 0000h successful AL = ??? (80h or C0h) DX = ??? (0603h) if AL=C0h 0001h failed AX = 0000h Note: called by DOS4GW.EXE SeeAlso: AX=BFDEh/BX=0000h --------E-15BFDEBX0009----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - GET PROTECTED MODE PROGRAM LOADER AX = BFDEh BX = 0009h Return: BX = 0000h (success) CX:DX -> full pathname to LOAD32.EXP SeeAlso: AX=BFDEh/BX=0000h --------E-15BFDEBX000A----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - DECREMENT ??? AX = BFDEh BX = 000Ah Return: BX = 0000h (success) AX = new value of ??? counter Notes: also resets a variety of values if the counter goes negative called by DOS4GW.EXE SeeAlso: AX=BFDEh/BX=0000h,AX=BFDEh/BX=000Bh --------E-15BFDEBX000B----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - INCREMENT ??? AX = BFDEh BX = 000Bh Return: AX = new value of ??? counter Note: called by DOS4GW.EXE SeeAlso: AX=BFDEh/BX=0000h,AX=BFDEh/BX=000Ah --------E-15BFDEBX000C----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - ??? AX = BFDEh BX = 000Ch CL = ??? 00h nonzero Return: ??? SeeAlso: AX=BFDEh/BX=0000h --------E-15BFDEBX000D----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - ??? AX = BFDEh BX = 000Dh ??? Return: ??? SeeAlso: AX=BFDEh/BX=0000h --------E-15BFDEBX000E----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - ??? AX = BFDEh BX = 000Eh DX:CX -> ??? Return: AX = segment of handle for calling task BX = ??? (probably destroyed) DX:CX -> ??? SeeAlso: AX=BFDEh/BX=0000h,AX=BFDEh/BX=000Fh,AX=BFDEh/BX=0013h --------E-15BFDEBX000F----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - ??? AX = BFDEh BX = 000Fh Return: AX = segment of handle for calling task BX = ??? (probably destroyed) DX:CX -> ??? Note: identical to AX=BFDEh/BX=000Eh with CX:DX = 0000h:0000h SeeAlso: AX=BFDEh/BX=000Eh,AX=BFDEh/BX=0010h --------E-15BFDEBX0010----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - GET TASK HANDLE AX = BFDEh BX = 0010h Return: AX = segment of caller's task handle BX destroyed SeeAlso: AX=BFDEh/BX=000Fh --------E-15BFDEBX0011----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - GET ??? AX = BFDEh BX = 0011h Return: CX = code segment of DVDOS4GX.DVR BX = ??? (0004h) SeeAlso: AX=BFDEh/BX=0000h --------E-15BFDEBX0012----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - GET ??? AX = BFDEh BX = 0012h Return: DX = code segment of DVDOS4GX.DVR BX = ??? (012Ch) CX = ??? (0006h) SeeAlso: AX=BFDEh/BX=0000h --------E-15BFDEBX0013----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - GET ??? AX = BFDEh BX = 0013h Return: DX:CX -> ??? SeeAlso: AX=BFDEh/BX=000Eh --------E-15BFDEBX0014----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - LOCK ??? MAILBOX AX = BFDEh BX = 0014h CX = index of ??? mailbox (0000h-0004h valid, but no range checking done) Return: AX,BX destroyed SeeAlso: AX=BFDEh/BX=0015h,AX=BFDEh/BX=0017h --------E-15BFDEBX0015----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - UNLOCK ??? MAILBOX AX = BFDEh BX = 0015h CX = index of ??? mailbox (0000h-0004h valid, but no range checking done) Return: AX,BX destroyed SeeAlso: AX=BFDEh/BX=0014h,AX=BFDEh/BX=0016h --------E-15BFDEBX0016----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - CHECK IF ??? MAILBOX OWNED AX = BFDEh BX = 0016h CX = index of ??? mailbox (0000h-0004h valid, but no range checking done) Return: AX = status 0000h no one owns mailbox 0001h mailbox has an owner BX destroyed SeeAlso: AX=BFDEh/BX=0015h,AX=BFDEh/BX=0017h --------E-15BFDEBX0017----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - GET ??? MAILBOX OWNER AX = BFDEh BX = 0017h CX = index of ??? mailbox (0000h-0004h valid, but no range checking done) Return: AX = segment of mailbox owner's handle BX = segment of caller's task handle SeeAlso: AX=BFDEh/BX=0015h,AX=BFDEh/BX=0016h --------E-15BFDEBXFFFD----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - GET ??? AX = BFDEh BX = FFFDh Return: CX:DX = ??? SeeAlso: AX=BFDEh/BX=FFFEh --------E-15BFDEBXFFFE----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - SET ??? AX = BFDEh BX = FFFEh CX:DX = ??? SeeAlso: AX=BFDEh/BX=FFFDh --------E-15BFDEBXFFFF----------------------- INT 15 - DESQview/X 1.02+ - DVDOS4GX.DVR - NOP AX = BFDEh BX = FFFFh SeeAlso: AX=BFDEh/BX=0000h --------B-15C0------------------------------- INT 15 - SYSTEM - GET CONFIGURATION (XT after 1/10/86,AT mdl 3x9,CONV,XT286,PS) AH = C0h Return: CF set if BIOS doesn't support call CF clear on success ES:BX -> ROM table (see below) AH = status 00h successful 86h unsupported function Notes: the 1/10/86 XT BIOS returns an incorrect value for the feature byte the configuration table is at F000h:E6F5h in 100% compatible BIOSes Dell machines contain the signature "DELL" or "Dell" at absolute FE076h and a model byte at absolute address FE845h Hewlett-Packard machines contain the signature "HP" at F000h:00F8h and a product identifier at F000h:00FAh (see below) Compaq machines can be identified by the signature string "COMPAQ" at F000h:FFEAh, and is preceded by additional information (see below) Tandy 1000 machines contain 21h in the byte at F000h:C000h and FFh in the byte at FFFFh:000Eh; Tandy 1000SL/TL machines only provide the first three data bytes (model/submodel/revision) in the returned table Toshiba laptops contain the signature "TOSHIBA" at FE010h some AST machines contain the string "COPYRIGHT AST RESEARCH" one byte past the end of the configuration table the Phoenix 386 BIOS contains a second version and date string (presumably the last modification for that OEM version) beginning at F000h:FFD8h, with each byte doubled (so that both ROM chips contain the complete information) SeeAlso: AH=C7h,AH=C9h,AH=D1h Format of ROM configuration table: Offset Size Description 00h WORD number of bytes following 02h BYTE model (see below) 03h BYTE submodel (see below) 04h BYTE BIOS revision: 0 for first release, 1 for 2nd, etc. 05h BYTE feature byte 1 (see below) 06h BYTE feature byte 2 (see below) 07h BYTE feature byte 3 (see below) 08h BYTE feature byte 4 (see below) 09h BYTE feature byte 5: reserved (0) (IBM) ??? (08h) (Phoenix 386 v1.10) ---AWARD BIOS--- 0Ah N BYTEs AWARD copyright notice ---Phoenix BIOS--- 0Ah BYTE ??? (00h) 0Bh BYTE major version 0Ch BYTE minor version (BCD) 0Dh 4 BYTEs ASCIZ string "PTL" (Phoenix Technologies Ltd) ---Quadram Quad386--- 0Ah 17 BYTEs ASCII signature string "Quadram Quad386XT" Bitfields for feature byte 1: Bit(s) Description 7 DMA channel 3 used by hard disk BIOS 6 2nd 8259 installed 5 Real-Time Clock installed 4 INT 15/AH=4Fh called upon INT 09h 3 wait for external event (INT 15/AH=41h) supported 2 extended BIOS area allocated (usually at top of RAM) 1 bus is Micro Channel instead of ISA 0 system has dual bus (Micro Channel + ISA) Bitfields for feature byte 2: Bit(s) Description 7 reserved 6 INT 16/AH=09h (keyboard functionality) supported 5 INT 15/AH=C6h (get POS data) supported 4 INT 15/AH=C7h (return memory map info) supported 3 INT 15/AH=C8h (en/disable CPU functions) supported 2 non-8042 keyboard controller 1 data streaming supported 0 reserved Bitfields for feature byte 3: Bit(s) Description 7-5 reserved 4 ??? (set on 1992 PS/1's, N51SX, CL57SX, 35SX?, 40SX?) 3 SCSI subsystem supported on system board 2 information panel installed 1 IML (Initial Machine Load) system 0 SCSI supported in IML Bitfields for feature byte 4: Bit(s) Description 7 ??? (set on N51SX, CL57SX) 6-4 reserved 3 ??? (set on some 1992 PS/1's, 35SX, 40SX) 2-1 reserved 0 ??? (set on N51SX, CL57SX, 57SX) Values for model/submodel/revision: Model Submdl Rev BIOS date System FFh * * 04/24/81 PC (original) FFh * * 10/19/81 PC (some bugfixes) FFh * * 10/27/82 PC (HD, 640K, EGA support) FFh 00h rev ??? Tandy 1000SL FFh 01h rev ??? Tandy 1000TL FFh 46h *** ??? Olivetti M15 FEh * * 08/16/82 PC XT FEh * * 11/08/82 PC XT and Portable FEh 43h *** ??? Olivetti M240 FEh A6h ??? ??? Quadram Quad386 FDh * * 06/01/83 PCjr FCh * * 01/10/84 AT models 068,099 6 MHz 20MB FCh 00h 00h ??? PC3270/AT FCh 00h 01h 06/10/85 AT model 239 6 MHz 30MB FCh 00h > 01h ??? 7531/2 Industrial AT FCh 01h 00h 11/15/85 AT models 319,339 8 MHz, Enh Keyb, 3.5" FCh 01h 00h 09/17/87 Tandy 3000 FCh 01h 00h 01/15&88 Toshiba T5200/100 FCh 01h 00h 12/26*89 Toshiba T1200/XE FCh 01h 00h 04/05A92 Toshiba T4500SX-C FCh 01h 00h 07/17o92 Toshiba T1800SX FCh 01h 00h 12/25n92 Toshiba T1850SX FCh 01h 00h 01/13E93 Toshiba T4400C (Those date characters are not typos) FCh 01h 00h 03/08/93 Compaq DESKPRO/i FCh 01h 00h various Compaq DESKPRO, SystemPro, ProSignia FCh 01h 00h 07/20/93 Zenith Z-Lite 425L FCh 01h 20h 06/10/92 AST FCh 01h 30h ??? Tandy 3000NL FCh 01h ??? ??? Compaq 286/386 FCh 02h 00h 04/21/86 PC XT-286 FCh 02h 00h various Compaq LTE Lite FCh 02h 00h 08/05/93 Compaq Contura 486/486c/486cx FCh 04h 00h 02/13/87 ** PS/2 Model 50 (10 MHz/1 ws 286) FCh 04h 02h ??? PS/2 Model 50 FCh 04h 03h 04/18/88 PS/2 Model 50Z (10 MHz/0 ws 286) FCh 04h 04h ??? PS/2 Model 50Z FCh 05h 00h 02/13/87 ** PS/2 Model 60 (10 MHz 286) FCh 06h 00h ??? IBM 7552-140 "Gearbox" FCh 06h 01h ??? IBM 7552-540 "Gearbox" FCh 08h *** ??? Epson, unknown model FCh 08h 00h ??? PS/2 Model 25/286 FCh 09h 00h ??? PS/2 Model 25 (10 MHz 286) FCh 09h 02h 06/28/89 PS/2 Model 30-286 FCh 0Bh 00h 02/16/90 PS/1 Model 2011 (10 MHz 286) FCh 20h 00h 02/18/93 Compaq ProLinea FCh 30h *** ??? Epson, unknown model FCh 31h *** ??? Epson, unknown model FCh 33h *** ??? Epson, unknown model FCh 3Fh ??? 09/16991 Toshiba T2200SX/60 FCh 42h *** ??? Olivetti M280 FCh 45h *** ??? Olivetti M380 (XP 1, XP3, XP 5) FCh 48h *** ??? Olivetti M290 FCh 4Fh *** ??? Olivetti M250 FCh 50h *** ??? Olivetti M380 (XP 7) FCh 51h *** ??? Olivetti PCS286 FCh 52h *** ??? Olivetti M300 FCh 81h 00h 01/15/88 Phoenix 386 BIOS v1.10 10a FCh 81h 01h ??? "OEM machine" FCh 82h 01h ??? "OEM machine" FCh 94h 00h ??? Zenith 386 FCh FFh ??? 01/28<91 Toshiba T2000SX/40 FBh 00h 01h 01/10/86 PC XT-089, Enh Keyb, 3.5" support FBh 00h 02h 05/09/86 PC XT FBh 4Ch *** ??? Olivetti M200 FAh 00h 00h 09/02/86 PS/2 Model 30 (8 MHz 8086) FAh 00h 01h 12/12/86 PS/2 Model 30 FAh 01h 00h ??? PS/2 Model 25/25L (8 MHz 8086) FAh 30h 00h ??? IBM Restaurant Terminal FAh 4Eh *** ??? Olivetti M111 FAh FEh 00h ??? IBM PCradio 9075 F9h 00h 00h 09/13/85 PC Convertible F9h FFh 00h ??? PC Convertible F8h 00h 00h 03/30/87 ** PS/2 Model 80 (16MHz 386) F8h 01h 00h 10/07/87 PS/2 Model 80 (20MHz 386) F8h 02h 00h ??? PS/2 Model 55-5571 F8h 04h 00h ??? PS/2 Model 70 F8h 04h 02h 04/11/88 PS/2 Model 70 20MHz, type 2 system brd F8h 04h 03h 03/17/89 PS/2 Model 70 20MHz, type 2 system brd F8h 05h 00h ??? IBM PC 7568 F8h 06h 00h ??? PS/2 Model 55-5571 F8h 07h 00h ??? IBM PC 7561/2 F8h 07h 01h ??? PS/2 Model 55-5551 F8h 07h 02h ??? IBM PC 7561/2 F8h 07h 03h ??? PS/2 Model 55-5551 F8h 09h 00h ??? PS/2 Model 70 16MHz, type 1 system brd F8h 09h 02h 04/11/88 PS/2 Model 70 some models F8h 09h 03h 03/17/89 PS/2 Model 70 some models F8h 0Bh 00h 01/18/89 PS/2 Model P70 (8573-121) typ 2 sys brd F8h 0Bh 02h 12/16/89 PS/2 Model P70 ?? F8h 0Ch 00h 11/02/88 PS/2 Model 55SX (16 MHz 386SX) F8h 0Dh 00h ??? PS/2 Model 70 25MHz, type 3 system brd F8h 0Eh 00h ??? PS/1 486SX F8h 0Fh 00h ??? PS/1 486DX F8h 10h 00h ??? PS/2 Model 55-5551 F8h 11h 00h 10/01/90 PS/2 Model 90 XP (25 MHz 486) F8h 12h 00h ??? PS/2 Model 95 XP F8h 13h 00h 10/01/90 PS/2 Model 90 XP (33 MHz 486) F8h 14h 00h 10/01/90 PS/2 Model 90-AK9 (25 MHz 486), 95 XP F8h 15h 00h ??? PS/2 Model 90 XP F8h 16h 00h 10/01/90 PS/2 Model 90-AKD (33 MHz 486) F8h 17h 00h ??? PS/2 Model 90 XP F8h 19h 05h ??? PS/2 Model 35/35LS or 40 (20 MHz 386SX) F8h 1Ah 00h ??? PS/2 Model 95 XP F8h 1Bh 00h 10/02/89 PS/2 Model 70-486 (25 MHz 486) F8h 1Ch 00h 02/08/90 PS/2 Model 65-121 (16 MHz 386SX) F8h 1Eh 00h 02/08/90 PS/2 Model 55LS (16 MHz 386SX) F8h 23h 00h ??? PS/2 Model L40 SX F8h 23h 01h ??? PS/2 Model L40 SX (20 MHz 386SX) F8h 25h 00h ??? PS/2 Model 57 SLC F8h 25h 06h ??? PS/2 Model M57 (20 MHz 386SLC) F8h 26h 00h ??? PS/2 Model 57 SX F8h 26h 01h ??? PS/2 Model 57 (20 MHz 386SX) F8h 28h 00h ??? PS/2 Model 95 XP F8h 29h 00h ??? PS/2 Model 90 XP F8h 2Ah 00h ??? PS/2 Model 95 XP (50 MHz 486) F8h 2Bh 00h ??? PS/2 Model 90 (50 MHz 486) F8h 2Ch 00h ??? PS/2 Model 95 XP F8h 2Ch 01h ??? PS/2 Model 95 (20 MHz 486SX) F8h 2Dh 00h ??? PS/2 Model 90 XP (20 MHz 486SX) F8h 2Eh 00h ??? PS/2 Model 95 XP F8h 2Eh 01h ??? PS/2 Model 95 (20 MHz 486SX + 487SX) F8h 2Fh 00h ??? PS/2 Model 90 XP (20 MHz 486SX + 487SX) F8h 30h 00h ??? PS/1 Model 2121 (16 MHz 386SX) F8h 33h 00h ??? PS/2 Model 30-386 F8h 34h 00h ??? PS/2 Model 25-386 F8h 36h 00h ??? PS/2 Model 95 XP F8h 37h 00h ??? PS/2 Model 90 XP F8h 38h 00h ??? PS/2 Model 57 F8h 39h 00h ??? PS/2 Model 95 XP F8h 3Fh 00h ??? PS/2 Model 90 XP F8h 40h 00h ??? PS/2 Model 95 XP F8h 41h 00h ??? PS/2 Model 77 F8h 45h 00h ??? PS/2 Model 90 XP (Pentium) F8h 46h 00h ??? PS/2 Model 95 XP (Pentium) F8h 47h 00h ??? PS/2 Model 90/95 E (Pentium) F8h 48h 00h ??? PS/2 Model 85 F8h 49h 00h ??? PS/ValuePoint 325T F8h 4Ah 00h ??? PS/ValuePoint 425SX F8h 4Bh 00h ??? PS/ValuePoint 433DX F8h 4Eh 00h ??? PS/2 Model 295 F8h 50h 00h ??? PS/2 Model P70 (8573) (16 MHz 386) F8h 50h 01h 12/16/89 PS/2 Model P70 (8570-031) F8h 52h 00h ??? PS/2 Model P75 (33 MHz 486) F8h 56h 00h ??? PS/2 Model CL57 SX F8h 57h 00h ??? PS/2 Model 90 XP F8h 58h 00h ??? PS/2 Model 95 XP F8h 59h 00h ??? PS/2 Model 90 XP F8h 5Ah 00h ??? PS/2 Model 95 XP F8h 5Bh 00h ??? PS/2 Model 90 XP F8h 5Ch 00h ??? PS/2 Model 95 XP F8h 5Dh 00h ??? PS/2 Model N51 SLC F8h 5Eh 00h ??? IBM ThinkPad 700 F8h 61h *** ??? Olivetti P500 F8h 62h *** ??? Olivetti P800 F8h 80h 00h ??? PS/2 Model 80 (25 MHz 386) F8h 80h 01h 11/21/89 PS/2 Model 80-A21 F8h 81h 00h ??? PS/2 Model 55-5502 F8h 87h 00h ??? PS/2 Model N33SX F8h 88h 00h ??? PS/2 Model 55-5530T F8h 97h 00h ??? PS/2 Model 55 Note N23SX F8h 99h 00h ??? PS/2 Model N51 SX F8h F2h 30h ??? Reply Model 32 F8h F6h 30h ??? Memorex Telex F8h FDh 00h ??? IBM Processor Complex (with VPD) F8h ??? ??? ??? PS/2 Model 90 (25 MHz 486SX) F8h ??? ??? ??? PS/2 Model 95 (25 MHz 486SX) F8h ??? ??? ??? PS/2 Model 90 (25 MHz 486SX + 487SX) F8h ??? ??? ??? PS/2 Model 95 (25 MHz 486SX + 487SX) E1h ??? ??? ??? ??? (checked for by DOS4GW.EXE) E1h 00h 00h ??? PS/2 Model 55-5530 Laptop 9Ah * * ??? Compaq XT/Compaq Plus 30h ??? ??? ??? Sperry PC 2Dh * * ??? Compaq PC/Compaq Deskpro ??? 56h ??? ??? Olivetti, unknown model ??? 74h ??? ??? Olivetti, unknown model * This BIOS call is not implemented in these early versions. Read Model byte at F000h:FFFEh and BIOS date at F000h:FFF5h. ** These BIOS versions require the DASDDRVR.SYS patches. *** These Olivetti and Epson machines store the submodel in the byte at F000h:FFFDh. Values for Dell model byte: 02h Dell 200 03h Dell 300 05h Dell 220 06h Dell 310 07h Dell 325 09h Dell 310A 0Ah Dell 316 0Bh Dell 220E 0Ch Dell 210 0Dh Dell 316SX 0Eh Dell 316LT 0Fh Dell 320LX 11h Dell 425E Format of Compaq product information: Address Size Description F000h:FFE4h BYTE product family code (first byte) F000h:FFE4h BYTE Point release number F000h:FFE4h BYTE ROM version code F000h:FFE4h BYTE product family code (second byte) F000h:FFE8h WORD BIOS type code Bitfields for Hewlett-Packard product identifier: Bit(s) Description 4-0 machine code 0 original Vectra 1 ES/12 2 RS/20 3 Portable/CS 4 ES 5 CS 6 RS/16 other reserved 7-5 CPU type 0 = 80286 1 = 8088 2 = 8086 3 = 80386 other reserved --------B-15C1------------------------------- INT 15 - SYSTEM - RETURN EXTENDED-BIOS DATA-AREA SEGMENT ADDRESS (PS) AH = C1h Return: CF set on error CF clear if successful ES = segment of data area SeeAlso: AH=04h"ABIOS" --------M-15C200----------------------------- INT 15 - SYSTEM - POINTING DEVICE BIOS INTERFACE (PS) - ENABLE/DISABLE AX = C200h BH = new state 00h disabled 01h enabled Return: CF set on error AH = status 00h successful 01h invalid function 02h invalid input 03h interface error 04h need to resend 05h no device handler installed --------M-15C201----------------------------- INT 15 - SYSTEM - POINTING DEVICE BIOS INTERFACE (PS) - RESET AX = C201h Return: CF set on error AH = status (see AX=C200h) CF clear if successful BH = device ID BL = value returned by attached device after reset AAh if device is a mouse Note: after successful completion of this call, the pointing device is set as follows: disabled, sample rate 100 Hz, resolution 4 counts/mm, scaling 1:1, unchanged data package size SeeAlso: INT 33/AX=0000h --------M-15C202----------------------------- INT 15 - SYSTEM - POINTING DEVICE BIOS INTERFACE (PS) - SET SAMPLING RATE AX = C202h BH = sampling rate 00h 10/second 01h 20/second 02h 40/second 03h 60/second 04h 80/second 05h 100/second 06h 200/second Return: CF set on error AH = status (see AX=C200h) SeeAlso: INT 33/AX=001Ch --------M-15C203----------------------------- INT 15 - SYSTEM - POINTING DEVICE BIOS INTERFACE (PS) - SET RESOLUTION AX = C203h BH = resolution 00h one count per mm 01h two counts per mm 02h four counts per mm 03h eight counts per mm Return: CF set on error AH = status (see AX=C200h) --------M-15C204----------------------------- INT 15 - SYSTEM - POINTING DEVICE BIOS INTERFACE (PS) - GET TYPE AX = C204h Return: CF set on error AH = status (see AX=C200h) CF clear if successful BH = device ID --------M-15C205----------------------------- INT 15 - SYSTEM - POINTING DEVICE BIOS INTERFACE (PS) - INITIALIZE AX = C205h BH = data package size (1 - 8 bytes) Return: CF set on error AH = status (see AX=C200h) Note: the pointing device is set as follows: disabled, 100 Hz sample rate, resolution 4 counts/mm, scaling 1:1 SeeAlso: AX=C201h --------M-15C206----------------------------- INT 15 - SYSTEM - POINTING DEVICE BIOS INTERFACE (PS) - EXTENDED COMMANDS AX = C206h BH = subfunction 00h return device status Return: BL = pointing device status (see below) CL = resolution (see AX=C203h) DL = sample rate, reports per second 01h set scaling at 1:1 02h set scaling at 2:1 Return: CF set on error AH = status (see AX=C200h) Bitfields for pointing device status: Bit(s) Description 0 right button pressed 1 reserved 2 left button pressed 3 reserved 4 0 if 1:1 scaling, 1 if 2:1 scaling 5 device enabled 6 0 if stream mode, 1 if remote mode 7 reserved --------M-15C207----------------------------- INT 15 - SYSTEM - POINTING DEVICE BIOS INTERFACE (PS) - SET DEVICE HANDLER ADDR AX = C207h ES:BX -> FAR user device handler Return: CF set on error AH = status (see AX=C200h) Note: when the subroutine is called, it is passed the following values on the stack; the handler should return with a FAR return without popping the stack: WORD 1: status (see below) WORD 2: X data (high byte = 00h) WORD 3: Y data (high byte = 00h) WORD 4: 0000h SeeAlso: INT 33/AX=000Ch Bitfields for status: Bit(s) Description 15-8 reserved (0) 7 Y data overflowed 6 X data overflowed 5 Y data is negative 4 X data is negative 3 reserved (1) 2 reserved (0) 1 right button pressed 0 left button pressed --------B-15C3------------------------------ INT 15 - SYSTEM - ENABLE/DISABLE WATCHDOG TIMEOUT (PS50+) AH = C3h AL = function 00h disable PS/2 watchdog timer 01h enable PS/2 watchdog timer BX = timer counter (0001h-00FFh) 02h disable Gearbox system 03h enable Gearbox system Return: CF set on error CF clear if successful Note: the watchdog timer generates an NMI SeeAlso: INT 21/AH=2Bh/CX=6269h/DX=742Dh --------B-15C4------------------------------- INT 15 - SYSTEM - PROGRAMMABLE OPTION SELECT (PS50+) AH = C4h AL = subfunction 00h return base POS register address 01h enable selected slot for setup BL = slot number (1 to 8) 02h disable setup for all slots Return: CF set on error DX = base POS register address (if subfunction 00h) SeeAlso: AH=C6h --------B-15C5------------------------------- INT 15 UC - OS HOOK - ROM BIOS TRACING CALLOUT (PS30/286,PS50Z,PS95) AH = C5h AL = interrupt being invoked 01h INT 19 02h INT 14 03h INT 16 04h INT 40 (floppy INT 13) 05h INT 17 06h INT 10 07h INT 12 08h INT 11 09h INT 1A Return: all registers except AX must be preserved Notes: called as the very first action of the indicated ROM BIOS interrupt handlers on the PS/2 Models 30/286, 50Z, and 95 default handler does nothing and returns CF clear for the above subfunctions, CF set and AH=86h for all other subfunctions value of AX passed to the original interrupt handler is pushed on stack immediately prior to call --------B-15C6------------------------------- INT 15 U - later PS/2 models - GET POS DATA AH = C6h ??? Return: ??? Notes: this function is referenced by name and number in some IBM BIOS manuals IBM reports that "there are a number of problems with this call" and does not recommend its use. SeeAlso: AH=C4h --------B-15C7------------------------------- INT 15 - SYSTEM - later PS/2s - RETURN MEMORY-MAP INFORMATION AH = C7h DS:SI -> user supplied memory map table (see below) Note: call AH=C0h and examine bit 4 of feature byte 2 to check if this function is supported Return: CF set on error, clear if successful SeeAlso: AH=C0h,AH=C9h,AH=D1h Format of memory-map table structure: Offset Size Description 00h WORD length of table (excluding this word) 02h DWORD local memory between 1M and 16M, in 1K blocks 06h DWORD local memory between 16M and 4G, in 1K blocks 0Ah DWORD system memory between 1M and 16M, in 1K blocks 0Eh DWORD system memory between 16M and 4G, in 1K blocks 12h DWORD cacheable memory between 1M and 16M, in 1K blocks 16h DWORD cacheable memory between 16M and 4G, in 1K blocks 1Ah DWORD 1K blocks before start of non-system memory between 1M and 16M 1Eh DWORD 1K blocks before start of non-system memory between 16M and 4G 22h 2 DWORDs reserved --------B-15C8------------------------------- INT 15 - SYSTEM - ENABLE/DISABLE PROCESSOR FUNCTIONS AH = C8h AL = function 00h disable cache or (90 and 95) disable cache L1 01h enable cache or (90 and 95) enable cache L1 ---models 90 and 95 only--- 02h disable cache L2 03h enable cache L2 04h disable both caches 05h enable both caches 06h return status of both caches 07h-FFh Reserved Return: CF set on error CF clear if successful AH = status (see below) For subfunction 06h only: BH = status of cache L2 00h enabled 01h disabled or not installed BL = status of cache L1 (same codes as BH) Notes: supported by at least PS/2 70, 70/486, 80-A21, 90, 95 call AH=C0h and examine bit 3 of feature byte 2 to check if this function is supported. on a 486 system, any external caches must be disabled when the on-chip cache (L1) is disabled. SeeAlso: AH=C0h Values for status: 00h operation successful 01h function choice (in AL) is invalid 02h NVRAM data is invalid 03h cache test error 04h (90 and 95 only) cannot perform operation requested due to state of other cache (see note above) 05h no L2 cache is present --------B-15C9------------------------------- INT 15 - newer PS/2; various BIOSes - GET CPU TYPE AND MASK REVISION AH = C9h AL = 10h (may be required on some non-PS BIOSes) Return: CF clear if successful AH = 00h CH = CPU type 03h 80386DX or clone 04h 80486 23h 80386SX or clone CL = mask revision (stepping level) 80386: 03h B1 05h D0 08h D1/D2/E1 80386SX: 04h A0 05h B 08h C/D1 CF set on error AH = status (80h,86h = function not supported) Notes: the BIOS must save DX at startup in order to be able to support this call; PS/2 Models 56, 57, 90, and 95 are known to support it the PS/2 BIOS merely reads CMOS locations 190h (type) and 191h (rev) --------B-15CA------------------------------- INT 15 U - PS/2 Model 95 - RESERVED AH = CAh ??? Return: ??? --------B-15CB------------------------------- INT 15 U - PS/2 Model 95 - RESERVED AH = CBh ??? Return: ??? --------B-15CC------------------------------- INT 15 U - PS/2 Model 95 - RESERVED AH = CCh ??? Return: ??? --------B-15CD------------------------------- INT 15 U - PS/2 Model 95 - RESERVED AH = CDh ??? Return: ??? --------B-15CE--BL00------------------------- INT 15 - later PS/2s - ALLOCATE DMA ARBITRATION LEVEL AH = CEh BL = 00h-0Eh arbitration level to be allocated 0Fh-FFh reserved AL = option byte bit 7-1: reserved (0) bit 0: 0 = need DMA channel for arbitration level requested 1 = no channel required for arbitration level Return: CF set on error AH = status (80h,86h = function not supported) CF clear on success AL = channel number 00h-07h channel number allocated for the arbiration level 08h-FEh reserved FFh no channel requested for arbitration level AH = status 00h success 01h arbitration level not available 02h channel not available 03h invalid arbitration level passed Notes: arbitration level 00h has the highest priority, 0Eh the lowest to perform a DMA transfer operation, be sure to call this function first, and call AH=CFh afterward. Failure to use this function can cause unpredictable results. SeeAlso: AH=CFh --------B-15CF------------------------------- INT 15 - later PS/2s - DEALLOCATE DMA ARBITRATION LEVEL AH = CFh BL = arbitration level to be deallocated (see AH=CEh) Return: CF set on error AH = status (80h,86h = function not supported) CF clear on success AH = status 00h success 04h arbitration level not allocated SeeAlso: AH=CEh --------B-15D0------------------------------- INT 15 - later PS/2s - RESERVED AH = D0h ??? Return: ??? --------B-15D100DX0000----------------------- INT 15 - later PS/2s - GET NUMBER OF DEVICE DESCRIPTOR TABLE (DDT) ENTRIES AX = D100h DX = 0000h (reserved, must set to 0) Return: BL = size of one DDT entry, in bytes CX = number of DDT entries AH = return code (see below) CF set on error CF clear on success SeeAlso: AH=C0h,AH=C7h,AH=C9h,AX=D101h,AX=D102h,AX=D103h,AX=D104h Values for return code: 00h success 01h requested DDT entry not found 02h DDT data not valid 86h function not supported --------B-15D101----------------------------- INT 15 - later PS/2s - RETURN DEVICE DESCRIPTOR TABLE (DDT) ENTRY BY NUMBER AX = D101h BX = number of requested entry (starting with 1) DX = 0000h (reserved, must be set to 0) ES:DI -> buffer to contain DDT entry (see below) Return: AH = return code (see AX=D100h) CF set on error CF clear on success ES:DI buffer filled with DDT entry SeeAlso: AH=C0h,AH=C7h,AH=C9h,AX=D100h,AX=D102h,AX=D104h Format of DDT: Offset Size Description 00h BYTE bits 7-4: reserved (set to 0) bits 3-0: slot of device (0 = system board) 01h BYTE bits 7-4: second interrupt for this device (0 = none) bits 3-0: first interrupt for this device (0 = none) 02h BYTE bits 7-4: second arbitration level for this device bits 3-0: first arbitration level for this device 03h WORD DDT indicators (see below) 05h BYTE reserved (0) 06h WORD device ID (0 = none) 08h WORD starting address of first I/O block (0 = none) 0Ah WORD starting address of second I/O block (0 = none) OCh WORD starting address of third I/O block (0 = none) OEh DWORD start of first non-system memory block (0 = none) 12h WORD size of first non-system memory block (in kilobytes) 14h DWORD start of second non-system memory block (0 = none) 18h WORD size of second non-system memory block (in kilobytes) 1Ah BYTE implementation identifier of the device 1Bh BYTE implementation revision level of the device Note: I/O block addresses and non-system memory addresses are listed in ascending order in each DDT entry. Bitfields for DDT indicators: Bit(s) Description 15 reserved (0) 14 second arbitration level exists 13 first arbitration level exists 12 serial interface is RS-422 11 not address limited 10 DMA channel used 9 second arbitration level can be shared 8 first arbitration level can be shared 7-0 reserved (0) --------B-15D102----------------------------- INT 15 - later PS/2s - RETURN DEVICE DESCRIPTOR TABLE (DDT) ENTRY BY I/O ADDRSS AX = D102h BX = entry number at which to start searching CX = requested I/O port address DX = 0000h (reserved, must be set to 0) ES:DI -> buffer to contain DDT entry (see AX=D101h) Return: AH = return code (see AX=D100h) BX = DDT entry number where I/O port was found, or total entries plus 1 if port was not found. CF set on error CF clear on success ES:DI buffer filled with DDT entry Desc: the DDT is searched from the specified entry for the I/O port in CX, and the first entry in which it is found is returned SeeAlso: AH=C0h,AH=C7h,AH=C9h,AX=D100h,AX=D101h,AX=D103h,AX=D104h --------B-15D103DX0000----------------------- INT 15 - later PS/2s - RETURN ENTIRE DDT AX = D103h DX = 0000h (reserved, must be set to 0) ES:DI -> buffer to contain DDT entry (see AX=D101h) Return: AH = return code (see AX=D100h) CF set on error CF clear on success ES:DI buffer filled with DDT entry SeeAlso: AH=C0h,AH=C7h,AH=C9h,AX=D100h,AX=D104h --------B-15D104----------------------------- INT 15 - later PS/2s - RETURN DEVICE DESCRIPTOR TABLE (DDT) ENTRY BY DEVICE ID AX = D104h BX = entry number at which to start searching CX = requested device ID DX = 0000h (reserved, must be set to 0) ES:DI -> buffer to contain DDT entry (see AX=D101h for format) Return: AH = return code (see AX=D100h) BX = DDT entry number where device ID was found, or total entries plus 1 if port was not found. CF set on error CF clear on success ES:DI buffer filled with DDT entry Desc: the DDT is searched from the specified entry for the device ID in CX, and the first entry in which it is found is returned. SeeAlso: AH=C0h,AH=C7h,AH=C9h,AX=D100h,AX=D101h,AX=D103h --------B-15D2------------------------------- INT 15 - later PS/2s - RESERVED AH = D2h ??? Return: ??? --------B-15D3------------------------------- INT 15 - later PS/2s - RESERVED AH = D3h ??? Return: ??? --------B-15D4------------------------------- INT 15 - later PS/2s - GET PHYSICAL FIXED DISK DRIVE NUMBER (SELECTABLE BOOT) AH = D4h DL = logical fixed disk drive number Return: AH = return code 00h success 01h specified logical drive number is invalid 86h function not supported 80h function not supported (on PCjr and PC) CF set on error CF clear on success AL = physical fixed disk drive number --------B-15D5------------------------------- INT 15 - later PS/2s - RESERVED AH = D5h ??? Return: ??? --------B-15D600BL00------------------------- INT 15 - later PS/2s - READ BOOT DEVICE ID AX = D600h BL = 00h DX = device ID Return: CF clear if successful AH = 00h CF set on error AH = status (86h for function not supported) SeeAlso: AX=D600h/BL=01h,AX=D601h/BL=00h,AX=D602h --------B-15D600BL01------------------------- INT 15 - later PS/2s - WRITE BOOT DEVICE ID AX = D600h BL = 01h DX = device ID Return: CF clear on success AH = 00h CF set on error AH = status (86h for function not supported) SeeAlso: AX=D600h/BL=00h,AX=D601h/BL=01h --------B-15D601BL00------------------------- INT 15 - later PS/2s - READ BOOT DEVICE KEY AX = D601h BL = 00h DX = device ID Return: CF clear on success AH = 00h CF set on error AH = status (86h for function not supported) SeeAlso: AX=D600h/BL=00h,AX=D601h/BL=01h,AX=D602h --------B-15D601BL01------------------------- INT 15 - later PS/2s - WRITE BOOT DEVICE KEY AX = D601h BL = 01h DX = device ID Return: CF clear on success AH = 00h CF set on error AH = status (86h for function not supported) SeeAlso: AX=D600h/BL=01h,AX=D601h/BL=00h --------B-15D602----------------------------- INT 15 - later PS/2s - QUERY BOOT REFERENCE PARTITION AX = D602h Return: CF clear on success AH = 00h AL = status of reference-partition boot request 00h boot not requested 01h boot requested CF set on error AH = status (86h for function not supported) SeeAlso: AX=D601h/BL=00h --------X-15D800----------------------------- INT 15 - EISA SYSTEM ROM - READ SLOT CONFIGURATION INFORMATION AX = D800h CL = slot number (including embedded and virtual) Return: CF clear if successful AH = 00h CF set on error AH = error code (80h,82h,83h,86h,87h)(see below) AL bit flags bit 7: set if duplicate IDs bit 6: set if product ID readable bits 4,5: slot type (00=expansion, 01=embedded, 10=virtual device) bits 0-3: duplicate ID number if bit 7 set BH = major revision level of configuration utility BL = minor revision level of configuration utility CX = checksum of configuration file DH = number of device functions DL = combined function information byte SI:DI = 4-byte compressed ID (DI = bytes 0&1, SI = bytes 2&3) Note: call with AL=80h if using 32-bit CS addressing mode instead of 16-bit SeeAlso: AX=D801h,AX=D804h Values for error code: 80h invalid slot number 81h invalid function number 82h EISA CMOS corrupt 83h empty slot 84h error clearing CMOS 85h EISA CMOS is full 86h invalid BIOS-FW function call 87h invalid system configuration 88h config utility version not supported --------X-15D801----------------------------- INT 15 - EISA SYSTEM ROM - READ FUNCTION CONFIGURATION INFORMATION AX = D801h CH = function number to read CL = slot number (including embedded and virtual) DS:SI -> 320-byte buffer for standard configuration data block Return: CF clear if successful AH = 00h DS:SI buffer filled CF set on error AH = error code (80h-83h,86h,87h)(see AX=D800h) BX destroyed Note: call with AL=81h if using 32-bit CS addressing mode instead of 16-bit --------X-15D802----------------------------- INT 15 - EISA SYSTEM ROM - CLEAR NONVOLATILE MEMORY (EISA CMOS) AX = D802h BH = EISA config utility major revision level BL = EISA config utility minor revision level Return: CF clear if successful AH = 00h CF set on error AH = error code (84h,86h,88h) (see AX=D800h) Note: call with AL=82h if using 32-bit CS addressing mode instead of 16-bit SeeAlso: AX=D803h --------X-15D803----------------------------- INT 15 - EISA SYSTEM ROM - WRITE NONVOLATILE MEMORY AX = D803h CX = length of data structure (0000h = empty slot) includes two bytes for config file checksum DS:SI -> configuration data Return: CF clear if successful AH = 00h CF set on error AH = error code (84h-86h)(see AX=D800h) Note: call with AL=83h if using 32-bit CS addressing mode instead of 16-bit SeeAlso: AX=D802h --------X-15D804----------------------------- INT 15 - EISA SYSTEM ROM - READ PHYSICAL SLOT AX = D804h CL = slot number (including embedded and virtual) Return: CF clear if successful AH = 00h CF set on error AH = error code (80h,83h,86h) (see AX=D800h) SI:DI = 4-byte compressed ID (DI = bytes 0&1, SI = bytes 2&3) Note: call with AL=84h if using 32-bit CS addressing mode instead of 16-bit SeeAlso: AX=D800h --------b-15D820----------------------------- INT 15 - Compaq LTE Lite - GET ??? AX = D820h DS:SI -> 17-byte buffer for ??? Return: DS:SI buffer filled (first byte is length of remaining data, unless it is greater than 10h, in which case the second byte is 00h and no other data is returned) Note: this function is also supported by Compaq's EISA System ROM, Contura 486/486c/486cx and recent DESKPRO/i ROMs SeeAlso: AX=D821h --------b-15D821----------------------------- INT 15 - Compaq LTE Lite - SET ??? AX = D821h DS:SI -> counted string (should not be more than 16 bytes) Return: AH = 00h Note: this function is also supported by Compaq's EISA System ROM, Contura 486/486c/486cx and recent DESKPRO/i ROMs SeeAlso: AX=D820h --------b-15D822BL00------------------------- INT 15 - Compaq EISA System ROM 04/08/93 - GET ??? AX = D822h BL = 00h CX = size of buffer or 0000h to retrieve required buffer size DS:SI -> buffer for ??? (if CX nonzero) Return: CF clear if successful AH = 00h DH = 08h CX = required buffer size to retrieve all data (if CX=0 on entry) DS:SI buffer filled (if CX nonzero on entry) CF set on error (BL nonzero) AH = 86h --------b-15D823----------------------------- INT 15 - Compaq EISA System ROM 04/08/93 - ??? AX = D823h BL = subfunction??? (00h or 80h) BH = ??? DS:SI -> buffer for ??? (see below) Return: CF clear if successful AH = 00h DH = 08h DL = ??? CF set on error AH = error code 86h BL neither 00h nor 80h 87h ??? Format of buffer: Offset Size Description 00h BYTE ??? 01h WORD ??? 03h BYTE ??? 04h WORD ??? 06h WORD ??? ??? ----------15D824----------------------------- INT 15 - Compaq EISA System ROM 04/08/93 - ??? AX = D824h CX = ??? DS:SI -> ASCIZ string containing ??? Return: CF clear if successful AH = 00h CX = ??? CF set on error AH = error code 87h ??? failed 88h ??? Note: these functions are only available if ??? from keyboard controller command C0h ----------15D825----------------------------- INT 15 - Compaq EISA System ROM 04/08/93 - ??? AX = D825h CX = ??? SI = ??? DI = ??? ??? Return: CF clear if successful AH = 00h CX = ??? CF set on error AH = error code 87h ??? failed 88h ??? CX = ??? Note: these functions are only available if ??? from keyboard controller command C0h ----------15D826----------------------------- INT 15 - Compaq EISA System ROM 04/08/93 - ??? AX = D826h BX = ??? CX = size of buffer in bytes DS:SI -> buffer for ??? ??? Return: CF clear if successful AH = 00h CX = ??? CF set on error AH = error code 87h ??? failed 88h ??? Note: these functions are only available if ??? from keyboard controller command C0h --------X-15D8------------------------------- INT 15 - EISA SYSTEM ROM - 32-bit CS ADDRESSING MODE CALLS AH = D8h AL = 80h to 84h other registers as appropriate for AL=00h to 04h Return: as appropriate for AL=00h to 04h Note: these functions are identical to AX=D800h to D804h, except that they should be called when using 32-bit CS addressing mode (pointers use ESI rather than SI as offset) instead of 16-bit addressing mode SeeAlso: AX=D800h,AX=D801h,AX=D802h,AX=D803h,AX=D804h --------b-15D8------------------------------- INT 15 - Compaq EISA System ROM 04/08/93 - 32-bit CS ADDRESSING MODE CALLS AH = D8h AL = A0h to A6h other registers as appropriate for AL=20h to 26h Return: as appropriate for AL=20h to 26h Note: these functions are identical to AX=D820h to D826h, except that they should be called when using 32-bit CS addressing mode --------Q-15DE00----------------------------- INT 15 - DESQview - GET PROGRAM NAME AX = DE00h Return: AX = offset into DESQVIEW.DVO of program most recently selected from the "Switch Windows" menu (see below) Note: always returns AX=0000h under DESQview/X SeeAlso: AX=DE07h Format of program entry in DESQVIEW.DVO: Offset Size Description 00h BYTE length of name (FFh if end of file) 01h N BYTEs name 2 BYTEs keys to invoke program (second = 00h if only one key used) BYTE program type 00h normal program 04h divider 80h Delete a Program 81h Change a Program WORD ??? apparently always 0000h --------Q-15DE01----------------------------- INT 15 - DESQview - UPDATE "OPEN WINDOW" MENU AX = DE01h Return: nothing Notes: reads DESQVIEW.DVO, disables Open menu if file not in current directory NOP for DESQview/X --------Q-15DE02----------------------------- INT 15 - DESQview 1.x only - SET ??? FLAG FOR CURRENT WINDOW AX = DE02h Return: nothing Note: this call is a NOP in DV 2.x SeeAlso: AX=DE03h --------Q-15DE03----------------------------- INT 15 - DESQview 1.x only - GET ??? FOR CURRENT WINDOW AX = DE03h Return: AX = ??? for current window BX = ??? for current window Note: this call is a NOP in DV 2.x SeeAlso: AX=DE02h --------Q-15DE04----------------------------- INT 15 - DESQview - GET AVAILABLE COMMON MEMORY AX = DE04h Return: BX = bytes of common memory available CX = largest block available DX = total common memory in bytes SeeAlso: AX=DE05h,AX=DE06h --------Q-15DE05----------------------------- INT 15 - DESQview - GET AVAILABLE CONVENTIONAL MEMORY AX = DE05h Return: BX = KB of memory available CX = largest block available DX = total conventional memory in KB SeeAlso: AX=DE04h,AX=DE06h --------Q-15DE06----------------------------- INT 15 - DESQview - GET AVAILABLE EXPANDED MEMORY AX = DE06h Return: BX = KB of expanded memory available CX = largest block available DX = total expanded memory in KB SeeAlso: AX=DE04h,AX=DE05h --------Q-15DE07----------------------------- INT 15 - DESQview - "APPNUM" - GET CURRENT PROGRAM'S NUMBER AX = DE07h Return: AX = number of program as it appears on the "Switch Windows" menu Note: this API call may be made from a hardware interrupt handler SeeAlso: AX=DE00h --------Q-15DE08----------------------------- INT 15 - DESQview - GET ??? AX = DE08h Return: AX = 0000h if ??? is not set to the current task 0001h if ??? is set to the current task --------Q-15DE09----------------------------- INT 15 - DESQview - UNIMPLEMENTED AX = DE09h Return: nothing (NOP in DV 1.x and 2.x) --------Q-15DE0A----------------------------- INT 15 - DESQview v2.00+ - "DBGPOKE" - DISPLAY CHARACTER ON STATUS LINE AX = DE0Ah BL = character Return: character displayed, next call will display in next position (which wraps back to the start of the line if off the right edge of screen) Notes: displays character on bottom line of *physical* screen, regardless of current size of window (even entirely hidden) does not know about graphics display modes, just pokes the characters into display memory this API call may be made from a hardware interrupt handler SeeAlso: AX=1003h --------Q-15DE0B----------------------------- INT 15 - DESQview v2.00+ - "APILEVEL" - DEFINE MINIMUM API LEVEL REQUIRED AX = DE0Bh BL = API level minor version number BH = API level major version number Return: AX = maximum API level (AH = major, AL = minor) Notes: if the requested API level is greater than the version of DESQview, a "You need a newer version" error window is popped up the API level defaults to 1.00, and is inherited by child tasks --------Q-15DE0C----------------------------- INT 15 - DESQview v2.00+ - "GETMEM" - ALLOCATE "SYSTEM" MEMORY AX = DE0Ch BX = number of bytes Return: ES:DI -> allocated block or 0000h:0000h (DV 2.26+) Note: use SETERROR (AX=DE15h) to avoid a user prompt if there is insufficient system memory SeeAlso: AX=1001h,AX=102Eh,AX=DE0Dh,AX=DE15h,AX=DE19h --------Q-15DE0D----------------------------- INT 15 - DESQview v2.00+ - "PUTMEM" - DEALLOCATE "SYSTEM" MEMORY AX = DE0Dh ES:DI -> previously allocated block Return: nothing SeeAlso: AX=1002h,AX=DE0Ch --------Q-15DE0E----------------------------- INT 15 - DESQview v2.00+ - "FINDMAIL" - FIND MAILBOX BY NAME AX = DE0Eh ES:DI -> name to find CX = length of name Return: BX = 0000h not found 0001h found DS:SI = object handle SeeAlso: AH=12h/BH=11h,AH=12h/BX=1200h"GETNAME" Special mailbox names: "COM1" ... "COM4" RBcomm using COM1 ... COM4 "DESQview/X Help Engine" "DESQview/X Network Server" Network Manager "DESQview X Server0" X-Windows server "DESQview X Server7" X-Windows printing service "INBOX" DESQview/X LPD requests "OUTBOX" DESQview/X LPD responses "WAITBOX" semaphore to synchronize DESQview/X LPD communications "_DVNM_" DV/X v1.10 network manager --------Q-15DE0F----------------------------- INT 15 - DESQview v2.00+ - ENABLE DESQview EXTENSIONS AX = DE0Fh Return: AX and BX destroyed (seems to be bug, weren't saved&restored) Notes: sends a manager stream with opcodes AEh, BDh, and BFh to task's window enables an additional mouse mode --------Q-15DE10----------------------------- INT 15 - DESQview v2.00+ - "PUSHKEY" - PUT KEY INTO KEYBOARD INPUT STREAM AX = DE10h BH = scan code BL = character Return: nothing Notes: a later read will get the keystroke as if it had been typed by the user multiple pushes are read last-in first-out if a script exists for the pushed key in the current application, the script will be executed early copies of DV 2.00 destroy AX, BX, ES, and DI SeeAlso: INT 16/AH=05h --------Q-15DE11BL00------------------------- INT 15 - DESQview v2.00+ - "JUSTIFY" - EN/DISABLE AUTOM. WINDOW JUSTIFICATION AX = DE11h BL = 00h viewport will not move automatically nonzero viewport will move to keep cursor visible (default) Return: nothing --------Q-15DE12BX0000----------------------- INT 15 - DESQview v2.01+ - "CSTYLE" - SET "C"-COMPATIBLE CONTROL CHAR INTERPRET AX = DE12h BX = 0000h select normal style (linefeed only moves down) nonzero select C style (linefeed moves to start of next line) Return: nothing Note: set on a per-task basis, and inherited from the parent task --------Q-15DE13----------------------------- INT 15 - DESQview v2.20+ - "GETCRIT" - GET CRITICAL NESTING COUNT AX = DE13h Return: BX = number of calls to BEGINC or ENTERC (see INT 15/AX=101Bh,DE1Ch) without matching ENDC (see INT 15/AX=101Ch) Note: this API call may be made from within a hardware interrupt handler SeeAlso: AX=101Bh,AX=101Ch,AX=DE1Bh,AX=DE1Ch --------Q-15DE14----------------------------- INT 15 - DESQview v2.20+ - GET OBJECT TYPE AX = DE14h ES:DI -> object Return: BL = 00h not an object 08h window or task 09h mailbox 0Ah keyboard 0Bh timer 0Ch objectq 0Fh pointer 10h panel SeeAlso: AX=1016h --------Q-15DE15----------------------------- INT 15 - DESQview v2.20+ - SET ERROR HANDLING AX = DE15h BL = error handling mode 00h post system error on all error conditions 01h return carry flag set on calls to ADDTO, SUBFROM, and WRITE messages sent to mailboxes which fail due to lack of system or common memory 02h (v2.26+) same as 01h, but also return null pointer for GETMEM calls which fail due to lack of system memory Return: nothing SeeAlso: AX=DE0Ch,AX=DE16h --------Q-15DE16----------------------------- INT 15 - DESQview v2.20+ - GET ERROR HANDLING AX = DE16h Return: BL = current mode 00h always post system error 01h return carry flag set on failed mailbox writes 02h return CF set on failed mailbox writes and NULL on failed GETMEM calls SeeAlso: AX=DE15h --------Q-15DE17----------------------------- INT 15 - DESQview v2.20-2.25 - reserved AX = DE17h Return: pops up "Programming error" window Note: AX = 1117h is NOT identical to this call under DESQview 2.20 thru 2.25 SeeAlso: AX=1117h --------Q-15DE17----------------------------- INT 15 - DESQview v2.26+ - "ASSERTMAP" - GET/SET MAPPING CONTEXT AX = DE17h BX = function 0000h get current mapping context without setting nonzero set new mapping context to BX Return: BX = mapping context in effect before call Notes: mapping contexts determine conventional-memory addressability; setting a mapping context ensures that the associated program and data areas are in memory for access. Usable by drivers, TSRs and shared programs. caller need not be running under DESQview this API call may be made from a hardware interrupt handler SeeAlso: AX=1016h,AX=1117h,AX=DE21h,INT 2F/AX=1685h --------Q-15DE18----------------------------- INT 15 - DESQview v2.20+ - internal - ??? AX = DE18h BP = function number high byte must be 10h low byte is function 00h set ??? BL = ??? (00h-10h, video mode???) BH = value to store 03h set ??? BL = ??? (stored in driver) 0Ah get ??? ES:DI -> 18-byte buffer to hold ??? Note: calls video driver (NOP for Hercules driver,probably CGA and MCGA also) --------Q-15DE19----------------------------- INT 15 - DESQview v2.23+ - "GETCOMMON" - ALLOCATE "COMMON" MEMORY AX = DE19h BX = number of bytes to allocate Return: AX = 0000h successful ES:DI -> allocated block nonzero insufficient memory Note: this API call may be made from within a hardware interrupt handler SeeAlso: AX=DE0Ch,AX=DE15h,AX=DE1Ah --------Q-15DE1A----------------------------- INT 15 - DESQview v2.23+ - "PUTCOMMON" - DEALLOCATE "COMMON" MEMORY AX = DE1Ah ES:DI -> previously allocated block Return: AX = 0000h (successful) Note: this function may be called from within a hardware interrupt handler SeeAlso: AX=DE0Dh,AX=DE19h --------Q-15DE1B----------------------------- INT 15 - DESQview v2.23+ internal - DECREMENT CRITICAL NESTING COUNT AX = DE1Bh Return: nothing SeeAlso: AX=101Ch,AX=DE13h,AX=DE1Ch --------Q-15DE1C----------------------------- INT 15 - DESQview v2.23+ - "ENTERC" - INCREMENT CRITICAL NESTING COUNT AX = DE1Ch Return: nothing Notes: similar to AX=101Bh, but begins the critical region without ensuring that DOS is free the official documentation states that this call should be paired with "ENDC" (AX=101Ch); no mention is made of AX=DE1Bh this API call may be made from within a hardware interrupt handler SeeAlso: AX=101Bh,AX=101Ch,AX=DE13h,AX=DE1Bh --------Q-15DE1D----------------------------- INT 15 - DESQview v2.23+ - "PUTKEY" - FAKE USER KEYSTROKES AX = DE1Dh DX = segment of handle for task to receive keystroke BL = character BH = scan code Return: AX = 0000h if successful nonzero if receiver's keyboard buffer was full Notes: the key is treated as though the user had pressed it, ignoring any script which may be bound to the key, and using the current field table if the keyboard object is in field processing mode multiple PUTKEYs are seen in the order in which they are executed SeeAlso: AX=DE10h --------Q-15DE1E----------------------------- INT 15 - DESQview v2.23+ - "SCRNINFO" - GET TRUE VIDEO PARAMETERS AX = DE1Eh Return: CL = actual number of rows on screen CH = actual number of columns on screen BL = actual video mode (may differ from INT 10/AH=0Fh return) (v2.26+) Note: this API call may be made from a hardware interrupt handler SeeAlso: INT 10/AH=0Fh --------Q-15DE1F----------------------------- INT 15 - DESQview v2.23+ - "DOSUSER" - GET HANDLE OF TASK CURRENTLY USING DOS AX = DE1Fh Return: BX = segment of task handle or 0000h if no tasks are using DOS Note: this API call may be made from within a hardware interrupt handler SeeAlso: AX=DE13h,INT 21/AH=34h --------Q-15DE20----------------------------- INT 15 - DESQview v2.26+ - "DISPATCHINT" - INTERRUPT ANOTHER TASK AX = DE20h BX = segment of handle of task to interupt DX:CX -> FAR interrupt routine BP,SI,DI,DS,ES as required by interrupt routine Return: nothing Notes: unlike "PGMINT" (AX=1021h), DISPATCHINT may be applied to the task making the DISPATCHINT call multiple "DISPATCHINT" calls are processed in the order in which they were executed the FAR routine is entered with the current ES, DS, SI, DI, and BP values, using the task's internal stack (see AX=101Ah); only SS:SP needs to be preserved this API call may be made from within a hardware interrupt handler SeeAlso: AX=1021h,AX=DE2Ah --------Q-15DE21----------------------------- INT 15 - DESQview v2.26+ - "ASSERTVIR" - CONTROL 386 SCREEN VIRTUALIZATION AX = DE21h BX = new state 0000h turn off nonzero turn on Return: BX = old state of virtualization Notes: this API call may be made from within a hardware interrupt handler under DV 2.40 and 2.42, this call appears to have no effect and always returns a nonzero value in BX which appears to be the offset within the DV common memory segment of the caller's task object; it may only have an effect within a hardware interrupt handler SeeAlso: AX=1117h,AX=DE17h --------Q-15DE22----------------------------- INT 15 - DESQview v2.26+ - "PROCESSMEM" - GET TASK MEMORY STATUS AX = DE22h DX = segment of task handle Return: DX = total amount of memory in paragraphs BX = amount of system memory in paragraphs CX = largest block of system memory available in paragraphs AX = memory flags (see below) Notes: if the task handle is a child task, the returned values will be for the process containing the task, rather than the task itself if the process's system memory is swapped out, BX,CX,DX remain unchanged, because the memory usage cannot be determined SeeAlso: AX=DE04h,AX=DE05h,AX=DE06h Bitfields for memory flags: Bit(s) Description 0 system memory resides in shared memory 1 process's memory is swapped out 2 process's system memory is swapped out --------Q-15DE23----------------------------- INT 15 U - DESQview v2.31+ - ??? AX = DE23h BX = ??? IRQ number on first PIC? CX = ??? IRQ number on second PIC? Return: ??? Note: called by QEMM 6.00+ --------Q-15DE24----------------------------- INT 15 - DESQview v2.40+ - "XNEWPROC" - START NEW APPLICATION AX = DE24h BX = length of .DVP data CX = length of ??? string DS:SI -> ??? string ES:DI -> .DVP data (see AX=102Ch) Return: BX = segment of task handle??? or 0000h on error Note: this call is similar to AX=102Ch except that it can interpret the extended DVP data SeeAlso: AX=102Ch --------Q-15DE25----------------------------- INT 15 - DESQview v2.40+ - "GETDVPATH" - GET DESQview DIRECTORY AX = DE25h ES:DI -> 67-byte buffer for ASCIZ directory name Return: ES:DI buffer filled with directory from which DESQview was started BUG: DV 2.42 does not place a terminating NUL at the end of the directory name, so if the buffer is not cleared to zeros before the call, there is no way to tell where the directory name ends. This bug has been fixed in DV 2.52 (DV/X 1.02) SeeAlso: AX=DE2Eh,INT 21/AH=47h --------Q-15DE26----------------------------- INT 15 - DESQview v2.40+ - "GETFOREGROUND" - GET KEYBOARD FOCUS AX = DE26h Return: BX = segment of handle for task with keyboard focus Note: under DESQview/X, the X server always has the keyboard focus unless a "direct" window is active SeeAlso: AX=DE2Fh,INT 2F/AX=DE0Ah --------Q-15DE27----------------------------- INT 15 - DESQview v2.50+ - "ADDINSTANCEDATA" - ADD PER-TASK SAVE/RESTORE AREA AX = DE27h BX = type 0000h process 0001h task ES:DI -> list of Instance Item Structures (see below) Return: CF clear if successful AX = ??? BX = ??? CF set on error AX = error code??? 0004h invalid BX value Note: DESQview 2.50-2.52 are distributed as part of DESQview/X v1.0x. SeeAlso: INT 2F/AX=DE08h,INT 2F/AX=DE09h Format of Instance Item Structure [one element of list]: Offset Size Description 00h WORD length of data area DESQview should save and restore on context switches (0000h = end of list) 02h DWORD pointer to area to be saved/restored --------Q-15DE28----------------------------- INT 15 U - DESQview v2.50+ - ??? AX = DE28h BX = segment of ??? or 0000h for default ??? Return: ??? Note: DESQview 2.50-2.52 are distributed as part of DESQview/X v1.0x. SeeAlso: AX=DE2Ah --------Q-15DE29BX0000----------------------- INT 15 U - DESQview/X - ??? AX = DE29h BX = 0000h ??? Return: CF clear if successful ??? CF set on error Notes: DESQview 2.50-2.52 are distributed as part of DESQview/X v1.0x. under DESQview 2.60, this function and all other subfunctions of AX=DE29h always return CF set, as they are unique to DESQview/X --------Q-15DE29BX0001----------------------- INT 15 U - DESQview/X - ??? AX = DE29h BX = 0001h DX = segment of window handle Return: CF clear if successful AX = ??? DX = ??? CF set on error Note: DESQview 2.50-2.52 are distributed as part of DESQview/X v1.0x. --------Q-15DE29BX0002----------------------- INT 15 U - DESQview/X - ??? AX = DE29h BX = 0002h DX = segment of window handle Return: CF clear if successful AX = ??? DX = ??? CF set on error Note: DESQview 2.50-2.52 are distributed as part of DESQview/X v1.0x. --------Q-15DE29BX0003----------------------- INT 15 U - DESQview/X - ??? AX = DE29h BX = 0003h DX = segment of window handle Return: CF clear if successful ??? CF set on error Note: DESQview 2.50-2.52 are distributed as part of DESQview/X v1.0x. --------Q-15DE29BX0004----------------------- INT 15 U - DESQview/X - GET DISPLAY NAME AX = DE29h BX = 0004h CX = size of buffer in bytes DX = segment of window handle ES:DI -> buffer for display name Return: CF clear if successful buffer filled with ASCIZ display name (truncated if necessary) or null string if no display CF set on error Notes: DESQview 2.50-2.52 are distributed as part of DESQview/X v1.0x. the name ":0" refers to the local display --------Q-15DE29BX0005----------------------- INT 15 U - DESQview/X - ??? AX = DE29h BX = 0005h ??? Return: CF clear if successful ??? CF set on error Note: under DESQview 2.60, this function and all other subfunctions of AX=DE29h always return CF set, as they are unique to DESQview/X --------Q-15DE2A----------------------------- INT 15 - DESQview v2.50+ - "DISPATCHINTAFTERDOS" - INTERRUPT ANOTHER TASK AX = DE2Ah BX = segment of handle for task to interrupt or 0000h for caller DX:CX -> interrupt routine BP,SI,DI,DS,ES as required by interrupt routine Return: nothing Notes: DESQview 2.50-2.52 are distributed as part of DESQview/X v1.0x. this call is the same as AX=DE20h except that it will delay interrupting the specified task until after it has exited DOS SeeAlso: AX=1021h,AX=DE20h --------Q-15DE2B----------------------------- INT 15 - DESQview v2.50+ - "OBJNEXT" - TRAVERSE OBJECT LIST AX = DE2Bh ES:DI -> starting object 0000h:0000h for first object in list??? Return: AX = status 0000h successful ES:DI -> next object of same type (window/non-window) 0001h failed (ES:DI was not a valid handle) Notes: DESQview 2.50-2.52 are distributed as part of DESQview/X v1.0x. there are two separate lists, one for window/task objects and one for all other objects SeeAlso: AX=1016h,AX=DE2Ah,AX=DE2Ch --------Q-15DE2C----------------------------- INT 15 - DESQview v2.50+ - "WININFO" - GET WINDOW INFORMATION AX = DE2Ch DX = window information format version (0100h for DESQview 2.5x) BX = segment of window handle or 0000h for default ES:DI -> buffer for window information (see below) Return: AX = status 0000h successful Note: DESQview 2.50-2.52 are distributed as part of DESQview/X v1.0x. SeeAlso: AX=1000h,AX=1016h,AX=DE01h,AX=DE2Bh Format of window information: Offset Size Description 00h BYTE task flag: 00h window, 01h task 01h BYTE process number if owner task 00h if non-owner task 02h WORD segment of owner's handle, 0000h if orphaned 04h WORD mapping context (see AX=1016h) 06h BYTE task status (see below) 07h BYTE unused 08h WORD status bits (see below) 0Ah BYTE 01h if foreground-only window Values for task status: 00h "Waiting" waiting for input 01h "Idle" keyboard poll limit reached 03h same as 01h 04h "Pausing" INT 15/AX=1000h pause called 04h DV/X direct: user did something to allow task switch 05h "ModeChg" video mode about to be changed 06h "ModeNtf" notify that video mode changed 07h "MoniCh" requested change to other monitor 08h "StartPgm" control relinquished to start new process 09h "MgrCan" made window manager CANCEL command 0Ah "Slicing" time slice expired 0Bh "Exit DOS" notify on DOS calls 0Ch "Enter DOS" process is re-entering DOS 0Dh "Terminate" INT 21/AH=4Ch or task freed 0Eh "BrkNxt" Control-Break pressed 0Fh "MgrCol" keyboard focus taken away 10h "PgmInt" interrupted by API call from another task 11h "BldOpen" call to INT 15/AX=DE01h Bitfields for status bits: Bit(s) Description 6 task is freeing another task 5 process is being created 4 user suspended process 3 process suspended itself 2 process is resized direct window (suspended) 1 process swapped out 0 DESQview process --------Q-15DE2D----------------------------- INT 15 U - DESQview v2.50+ - GET/SET SOCKET HANDLER AX = DE2Dh CX = direction FFFFh set socket handler DX:BX -> FAR function for socket interface must be of the format described under INT 63"DESQview" other get socket handler Return: DX:BX -> socket handler Notes: DESQview 2.50-2.52 are distributed as part of DESQview/X v1.0x. the "set" subfunction is normally called only by SOCKET.DVR SeeAlso: AX=DE2Eh,INT 63"DESQview" --------Q-15DE2E----------------------------- INT 15 U - DESQview v2.50+ - SOCKET API AX = DE2Eh DX:BX -> socket record or 0000h:0000h to create a new socket record Return: CX = size of socket record in bytes DX:BX -> socket record which was used Notes: DESQview 2.50-2.52 are distributed as part of DESQview/X v1.0x. socket records are allocated from common memory for Unix compatibility, each socket and connection on a socket is allocated a DOS file handle (referencing an SFT for NUL) which is used on various calls to specify which of possibly multiple connections is to be operated upon SeeAlso: AX=DE2Dh,INT 61/AX=0001h/SF=0001h"VINES",INT 63"DESQview" Values for function number: 0000h initialize socket??? 0001h "gethostname" 0002h "ioctl" check for input 0003h "sleep" delay for specified period 0004h "htons" convert word to network (big-endian) byte order 0005h "select" 0006h "bsd_close"/"so_close" close socket 0007h NOP 0008h "connect" initiate connection on socket 0009h "recv"/"recvfrom" read from socket 000Ah "socket" 000Bh ??? 000Ch "gethostbyname" 000Dh "send"/"sendto" write to socket 000Eh ??? (does something to all connections for process) 000Fh "getpid" get process identifier 0010h "gettimeofday" 0011h "bind" assign name to socket 0012h "listen" listen for connections on socket 0013h "accept" accept connection on socket 0014h connect to X server 0015h "gethostbyaddr" get host information for an address 0016h "getprotobyname" 0017h "getprotobynumber" 0018h "getservbyname" 0019h "getservbyport" 001Ah "getsockname" determine name bound to socket 001Bh "getpeername" get name of connected peer 001Ch "getsockopt"/"setsockopt" 001Dh "so_exit" close all sockets for calling process 001Eh "issock" determine whether file handle references socket 001Fh "so_attach" reattach previously detached socket 0020h "so_detach" temporarily detach socket 0021h get DESQview directory 0022h "NewProc" start new application (see AX=102Ch) 0023h "so_linkup" 0024h canonicalize filename 0025h indirect INT 15h call 0026h Network Manager interface 0027h "so_unlink" close connection from "so_linkup" 0028h "raisepriority" 0029h "lowerpriority" 002Ah ??? FFFFh "NetExit" (appears to be a NOP) Format of socket record: Offset Size Description 00h WORD signature F0ADh 02h WORD function number (see above) 04h WORD returned error code (see below) 06h WORD maximum message size??? (usually 0400h) 08h WORD PSP segment to use or 0000h if socket not valid 0Ah WORD scratch space (JFT size) 0Ch DWORD scratch space (JFT address) 10h DWORD mailbox handle (initialized by function 0000h) 14h DWORD timer object handle (initialized by function 0000h) ---function 0000h--- 18h WORD (return) ??? ---function 0001h--- 18h WORD (return) status??? 1Ah 128 BYTEs (return) ASCIZ hostname (empty string if not on network) 9Ah WORD maximum length of hostname to return ---function 0002h--- 18h WORD (return) status 1Ah WORD socket's file handle 1Ch WORD IOCTL function 05h "FIONREAD" determine available input 06h "FIONBIO" set blocking state of socket 1Eh WORD (return, subfn 05h) number of bytes available for reading (call, subfn 06h) 0000h blocking, nonzero nonblocking ---function 0003h--- 18h 2 BYTEs unused 1Ah WORD delay time in seconds ---function 0004h--- 18h WORD (return) result in network (big-endian) byte order 1Ah WORD value to convert to network byte order ---function 0005h--- 18h WORD (return) number of handles meeting the specified conditions??? 1Ah WORD number of file handles in each bitset??? 1Ch DWORD bitset of socket handles to check for readability??? 20h DWORD bitset of socket handles to check for writability??? 24h DWORD bitset of socket handles to check for errors??? 28h WORD timeout in ??? or 0000h to block until some socket ready 2Ah DWORD ??? 2Eh DWORD ??? ---function 0006h--- 18h WORD (return) status: 0000h if successful, FFFFh on error 1Ah WORD socket's file handle ---function 0008h--- 18h WORD (return) status: 0000h if successful, FFFFh on error 1Ah WORD socket's file handle 1Ch WORD 0001h if socket name specified, 0000h if not 1Eh WORD length of socket name 20h N BYTEs name of socket to which to connect ---function 0009h--- 18h WORD (return) number of bytes actually read, 0000h if connection closed, or FFFFh on error 1Ah WORD socket's file handle 1Ch WORD number of bytes to read 1Eh WORD flags 20h WORD 0000h if no source address desired 0001h if source address is to be stored (datagram sockets) 22h WORD length of source address 24h 110 BYTEs source address 92h 1K BYTEs buffer for data to be read ---function 000Ah--- 18h WORD (return) socket's file handle or FFFFh on error 1Ah WORD address family (0001h,0002h) 1Ch WORD socket type 1Eh WORD protocol ---function 000Bh--- 18h WORD (return) 0001h if ??? or FFFFh on error 1Ah WORD socket's file handle 1Eh WORD (call) ??? ---function 000Ch--- 18h 128 BYTEs buffer containing ASCIZ hostname special case if empty string or "unix" 98h ??? 'struct hostent' ??? A2h ??? (return) ??? ---function 000Dh--- 18h WORD (return) number of bytes actually written or FFFFh on error 1Ah WORD socket's file handle 1Ch WORD number of bytes to write 1Eh WORD number of bytes to follow in subsequent writes??? 20h WORD flags 22h WORD 0000h if no destination specified, 0001h if destination present 24h WORD ??? 26h WORD length of destination address 28h 110 BYTEs destination address 96h 1K BYTEs buffer containing data to be written ---function 000Eh--- no additional fields ---function 000Fh--- 18h DWORD (return) DESQview task handle of calling process ---function 0010h--- 18h DWORD (return) current time 1Ch DWORD (return) ??? ---function 0011h--- 18h WORD (return) status: 0000h if successful, FFFFh on error 1Ah WORD socket's file handle 1Ch WORD length of name 1Eh N BYTEs buffer for socket name ---function 0012h--- 18h WORD (return) status: 0000h if successful, FFFFh on error 1Ah WORD socket's file handle 1Ch WORD maximum backlog of pending connections allowed on socket ---function 0013h--- 18h WORD (return) file handle for new connection or FFFFh on error 1Ah WORD listen()ing socket's file handle 1Ch WORD (call) length of buffer for connecting entity's address (return) actual length of address 1Eh N BYTEs buffer for connecting entity's address ---function 0014h--- 18h WORD (return) socket's file handle or FFFFh on error 1Ah 4 BYTEs (return) ??? 1Eh WORD (return) ??? 20h WORD (return) ??? 22h 256 BYTEs ASCIZ X display name 122h ??? ---function 0015h--- 18h WORD (call) type of address??? (test for 0001h seen) 1Ah WORD (call) length of buffer for host address 1Ch 110 BYTEs buffer containing host address 8Ah WORD (return) offset of official host name??? 8Ch WORD (return) offset of alias list??? 8Eh WORD (return) address type??? 90h WORD (return) length of an address in bytes??? 92h WORD (return) offset of address??? 9Ah N BYTEs (return) ??? buffer for hostname, alias list, and host address ---function 0016h--- 18h ??? buffer for protocol name??? 98h ??? ---function 0017h--- 18h WORD (call) protocol number??? 1Ah WORD (return) ??? or 0001h ---function 0018h--- 18h 128 BYTEs buffer containing ??? 98h 128 BYTEs buffer containing ??? 118h WORD (return) ??? ---function 0019h--- 18h WORD length of name??? 1Ah 128 BYTEs buffer for name??? 9Ah WORD (return) ??? ---function 001Ah--- 18h WORD (return) 0000h if successful, FFFFh on error 1Ah WORD socket's file handle 1Ch WORD (call) length of buffer for socket name (return) actual length of socket name 1Eh N BYTEs buffer for socket name ---function 001Bh--- 18h WORD (return) status: 0000h if successful, FFFFh on error 1Ah WORD socket's file handle 1Ch WORD (call) size of buffer for name (return) actual size of name 1Eh N BYTEs buffer for peer's name ---function 001Ch--- 18h WORD (return) status: 0000h if successful, FFFFh on error 1Ah WORD direction: 0000h to get, 0001h to set 1Ch WORD socket's file handle 1Eh WORD option level 20h WORD option name 22h WORD (call) length of buffer for option value (return) actual length of option value 24h N BYTEs buffer for option value ---function 001Dh--- no additional fields ---function 001Eh--- 18h WORD (return) status: 0000h ??? or 0001h ??? 1Ah WORD file handle which may or may not be a socket ---function 001Fh--- 18h WORD (return) file handle or FFFFh on error 1Ah DWORD (call) pointer to Socket Context Record (see below) of a previously detached socket ---function 0020h--- 18h WORD (return) status: 0000h if successful or FFFFh on error 1Ah WORD socket's file handle 1Ch DWORD (return) pointer to Socket Context Record (see below) for the file handle ---function 0021h--- 18h 64 BYTEs buffer for DESQview startup directory (see AX=DE25h) ---function 0022h--- 18h DWORD (return) task handle of new application 1Ch WORD size of .DVP data 1Eh 129 BYTEs ASCIZ ??? 9Fh N BYTEs .DVP data (see AX=102Ch) ---function 0023h--- 18h WORD (return) ??? or FFFFh on error 1Ah WORD socket's file handle??? ---function 0024h--- 18h WORD (return) DOS error code (see INT 21/AH=59h) 0000h if successful 1Ah 129 BYTEs ASCIZ filename/pathname 11Bh 129 BYTEs ASCIZ canonicalized filename/pathname (see INT 21/AH=60h) ---function 0025h--- 18h WORD value of AX 1Ah WORD value of BX 1Ch WORD (call) value of CX for call if AH value other than 12h (call) number of stack parameters if AH value is 12h (return) returned CX for calls other than INT 15/AH=12h 1Eh WORD value of DX 20h WORD value of DI 22h WORD value of SI 24h WORD value of DS 26h WORD value of ES 28h WORD (return) value of FLAGS after call 2Ah N DWORDs (call) stack parameters for INT 15/AH=12h call (return) stack results from INT 15/AH=12h call ---function 0026h--- 18h WORD (call) Network Manager subfunction (see below) (return) status??? 1Ah WORD (call) size of parameter data (return) size of returned data 1Ch N BYTEs (call) parameter data required by call (see below) (return) result data (see below) ---function 0027h--- 18h WORD (return) status: 0000h if successful, FFFFh on error 1Ah WORD socket's file handle ---functions 0028h,0029h--- 18h WORD (call) file handle for which to set priority low/high FFFFh to change calling task's priority ---function 002Ah--- no additional fields Values for Network Manager subfunction: 0004h "so_exit"??? 0005h "gethostbyname" 0006h "gethostname" 0009h "socket" 000Dh "gethostbyaddr" 000Fh "getprotobyname" 0010h get protocol name for protocol number 0011h "getservbyname" 0012h "getservbyport" 0013h "getsockname"??? 0016h ??? 0017h kill Network Manager 0018h "getpeername"??? 0019h ??? (called by socket function 0000h) 001Ah ??? 001Bh "so_linkup" 001Dh get network services 001Fh "getpwuid" 0020h "getpwnam" 0021h "getpwvar" 0022h "crypt" 0023h "so_unlink" 0024h "getlogin" 0028h "sethostent" 0029h "gethostent" 002Ah "soaddhost" 002Bh "soupdatehost" 002Ch "sodeletehost" 002Dh "setservent" 002Eh "getservent" 002Fh "setpwent" 0030h "getpwent" 0031h ??? 0032h ??? 0033h ??? 0034h get IP network number 0035h ??? (pops up Network Manager window) 0037h ??? 0038h get machine name and IP address 0039h ??? Format of Function 0026h/Subfunction 000Fh data: Offset Size Description 00h 8 BYTEs (return) ??? Format of Function 0026h/Subfunction 0010h data: Offset Size Description 00h 2 BYTEs (return) ??? 02h WORD (return) protocol number 04h WORD (call) protocol number for which to get name 06h WORD (return) ??? 08h var (return) ASCIZ protocol name N var (return) ASCIZ protocol name Format of Function 0026h/Subfunction 0011h data: Offset Size Description 00h 8 BYTEs ??? 08h var (return) ASCIZ protocol name var (return) ASCIZ ??? name var (return) ASCIZ ??? name Format of Function 0026h/Subfunction 0012h data: Offset Size Description 00h 8 BYTEs (return) ??? Format of Function 0026h/Subfunction 0013h data: Offset Size Description 00h 116 BYTEs (return) ??? Format of Function 0026h/Subfunction 0016h data: Offset Size Description 00h 4 BYTEs (return) ??? Format of Function 0026h/Subfunction 0018h data: Offset Size Description 00h 116 BYTEs (return) ??? Format of Function 0026h/Subfunction 0019h data: Offset Size Description 00h 4 BYTEs (return) ??? 04h DWORD (return) task handle of ??? Format of Function 0026h/Subfunction 001Ah data: Offset Size Description 00h 38 BYTEs (return) ??? Format of Function 0026h/Subfunction 001Bh data: Offset Size Description 00h 10 BYTEs (return) ??? Format of Function 0026h/Subfunction 001Dh return data [array]: Offset Size Description 00h WORD ??? or FFFFh if end of array 02h 7 BYTEs ??? 09h 27 BYTEs ASCIZ name of service Format of Function 0026h/Subfunction 0024h return data: Offset Size Description 00h var ASCIZ username Format of Function 0026h/Subfunction 0030h data: Offset Size Description 00h WORD (call) UID or 0000h for current user (return) ??? 02h WORD (return) UID 04h 6 BYTEs (return) ??? 0Ah var (return) ASCIZ username var (return) ASCIZ encrypted password var (return) ASCIZ initial ("home") directory Format of Function 0026h/Subfunction 0034h data: Offset Size Description 00h 1-3 BYTEs IP network number of caller's machine (low byte first) Format of Function 0026h/Subfunction 0038h return data: Offset Size Description 00h BYTE ??? 01h 4 BYTEs IP address 05h var ASCIZ machine name ??? Values for error code: 0000h successful 0009h "BADF" bad file handle 000Ch "ENOMEM" out of memory 000Eh "EFAULT" bad address 0016h "EINVAL" invalid argument 0018h "EMFILE" too many open files 0020h "EPIPE" ??? broken pipe 0023h "EWOULDBLOCK" operation cannot be completed at this time 0024h "EINPROGRESS" operation now in progress 0026h "ENOTSOCK" socket invalid 0028h "EMSGSIZE" message too long to send atomically 002Ch "ESOCKTNOSUPPORT" socket type not supported 002Fh "EAFNOSUPPORT" address family not supp. by protocol fam. 0031h "EDOM" argument too large 0038h "EISCONN" socket is already connected 0039h "ENOTCONN" socket is not connected Format of Socket Context Record: Offset Size Description 00h DWORD pointer to next Socket Context Record, 0000h:0000h if last 04h WORD SFT index for socket, 00FFh if not connected, FFFFh if detached 06h WORD PSP segment of owner or 0000h 08h WORD mapping context of owning window (see AX=1016h) 0Ah 2 BYTEs ??? 0Ch WORD address family 0Eh WORD socket type 10h WORD protocol 12h WORD socket state 0001h created 0002h bound 0003h listening??? 0005h connected 14h DWORD timer object handle 18h DWORD object handle (mailbox???) 1Ch DWORD object handle of parent of above object or 0000h:0000h 20h DWORD pointer to ??? or 0000h 24h 6 BYTEs ??? 2Ah WORD file handle for socket or FFFFh 2Ch 2 BYTEs ??? 2Eh WORD nonzero if socket nonblocking ---network connections only--- 30h 2 BYTEs ??? 32h WORD ??? 34h 4 BYTEs (big-endian) IP address of remote 38h 6 BYTEs ??? --------Q-15DE2F----------------------------- INT 15 - DESQview v2.50+ - "VIDEONOTIFY" - HAS DIRECT WINDOW BEEN ACTIVE? AX = DE2Fh Return: BX = status 0001h keyboard focus has been given to a direct window since the last call 0000h if not Notes: DESQview 2.50-2.53 are distributed as part of DESQview/X v1.00-1.10. Quarterdeck stated that this call would not be available under future versions of DESQview Classic, but it is still present in v2.60 --------Q-15DE30----------------------------- INT 15 - DESQview v2.50+ - "GETDVXVERSION" - GET DESQview/X VERSION AX = DE30h Return: BX = version (BH=major, BL=minor) or 0000h if not DESQview/X Notes: DESQview 2.50-2.53 are distributed as part of DESQview/X v1.00-1.10. you must first check the DESQview version to verify that it is 2.50 or greater SeeAlso: INT 21/AH=2Bh/CX=4445h --------Q-15DE31----------------------------- INT 15 - DESQview/X v1.10 - ??? AX = DE31h CX = ??? 0000h ??? nonzero ??? ??? Return: ??? --------b-15DF------------------------------- INT 15 - Juko UNIQUE UX BIOS - TURBO MODE CONTROL AH = DFh AL = function 00h turn on Turbo mode 01h turn off Turbo mode 02h set Turbo mode according to hardware switch SeeAlso: INT 13/AX=FFFFh --------b-15E00F----------------------------- INT 15 - Compaq Systempro - MULTIPROCESSOR DISPATCH AX = E00Fh ES:BX -> start of 2nd processor's execution Return: AL = status 0Fh successful 00h failure SeeAlso: AX=E10Eh,AX=E200h --------b-15E10E----------------------------- INT 15 - Compaq Systempro - MULTIPROCESSOR END-OF-DISPATCH AX = E10Eh ES:BX -> start of 2nd processor's execution Return: AL = status 0Fh successful (halted) 00h failure (not halted) SeeAlso: AX=E00Fh,AX=E200h --------b-15E200----------------------------- INT 15 - Compaq Systempro - MULTIPROCESSOR AVAILABLE AX = E200h Return: AX bit 15 set if 2nd processor available SeeAlso: AX=E00Fh,AX=E10Eh --------b-15E4------------------------------- INT 15 - Tandy??? - ??? AH = E4h AL = subfunction 21h, 89h, 8Ah, 8Bh called by 386MAX v6.01 DL = ??? Return: DL = 00h if successful??? Note: the section of code in 386MAX which calls these functions also checks whether the ROM BIOS has both Tandy and Phoenix Technologies signatures if these calls fail; the Tandy 1000SL/TL BIOS does not support this function, however, returning the usual CF set/AH=86h for "unsupported function". --------b-15E4------------------------------- INT 15 - Compaq ROM BIOS 03/08/93 and newer - ??? AH = E4h AL = subfunction 00h get ??? Return: CF clear AH = 00h CX = 0000h BX = ??? (read from [XBDA:0094h]) 01h,02h unsupported by this ROM version Return: CF set, AH = 86h 80h,90h,A0h,B0h,C0h,D0h,E0h,F0h set ??? Return: CF clear AH = 00h CX = 0000h BX = ??? 81h,91h,A1h,B1h,C1h,D1h,E1h,F1h unsupported by 3/8/93&4/8/93 ROMs Return: CF set, AH = 86h Notes: functions 80h/90h/etc. are not supported by the 4/8/93 EISA System ROM these functions are not supported by the 7/26/93 LTE Lite 386 ROM --------b-15E800----------------------------- INT 15 - Compaq Contura - GET ??? AX = E800h Return: AX = 0000h BH = 00h BL = ??? (read from port 0C7Ch) CH = ??? CL = ??? DX = 0000h Note: also supported by 3/8/93 DESKPRO/i and 7/26/93 LTE Lite 386 ROM BIOS --------b-15E801----------------------------- INT 15 - Compaq Contura - GET ??? AX = E801h Return: CF clear AX = extended memory in K (read from CMOS locations 30h and 31h) BH = ??? BL = ??? CX = extended memory in K (read from CMOS locations 17h and 18h) DX = ??? Note: also supported by 3/8/93 DESKPRO/i and 7/26/93 LTE Lite 386 ROM BIOS --------b-15E802----------------------------- INT 15 - Compaq Contura - GET ??? AX = E802h Return: CF clear AX = 0000h BX = ??? CX = 0000h Note: this function is also supported by the LTE Lite 25c, 25E, and 486; not supported by LTE Lite 20 and 25. --------m-15F200CX454D----------------------- INT 15 - Tandon memory mapper - Tandon MAPPER HARDWARE INITIALISATION CHECK ??? AX = F200h CX = 454Dh Return: CF clear if hardware already initialised BX = upper RAM areas in use bit 0: C000-C3FF bit 1: C400-C7FF ... bit 11: EC00-EFFF CF set if hardware not initialised yet --------B-1600------------------------------- INT 16 - KEYBOARD - GET KEYSTROKE AH = 00h Return: AH = BIOS scan code AL = ASCII character Notes: on extended keyboards, this function discards any extended keystrokes, returning only when a non-extended keystroke is available the BIOS scan code is usually, but not always, the same as the hardware scan code processed by INT 09. It is the same for ASCII keystrokes and most unshifted special keys (F-keys, arrow keys, etc.), but differs for shifted special keys. SeeAlso: AH=01h,AH=05h,AH=10h,AH=20h,INT 18/AH=00h --------B-1601------------------------------- INT 16 - KEYBOARD - CHECK FOR KEYSTROKE AH = 01h Return: ZF set if no keystroke available ZF clear if keystroke available AH = BIOS scan code AL = ASCII character Note: if a keystroke is present, it is not removed from the keyboard buffer; however, any extended keystrokes which are not compatible with 83/84- key keyboards are removed in the process of checking whether a non-extended keystroke is available SeeAlso: AH=00h,AH=11h,AH=21h,INT 18/AH=01h --------B-1602------------------------------- INT 16 - KEYBOARD - GET SHIFT FLAGS AH = 02h Return: AL = shift flags (see below) SeeAlso: AH=12h,AH=22h,INT 17/AH=0Dh,INT 18/AH=02h Bitfields for shift flags: Bit(s) Description 7 Insert active 6 CapsLock active 5 NumLock active 4 ScrollLock active 3 Alt key pressed (either Alt on 101/102-key keyboards) 2 Ctrl key pressed (either Ctrl on 101/102-key keyboards) 1 left shift key pressed 0 right shift key pressed --------B-1603------------------------------- INT 16 - KEYBOARD - SET TYPEMATIC RATE AND DELAY AH = 03h AL = subfunction 00h set default delay and rate (PCjr and some PS/2) 01h increase delay before repeat (PCjr) 02h decrease repeat rate by factor of 2 (PCjr) 03h increase delay and decrease repeat rate (PCjr) 04h turn off typematic repeat (PCjr and some PS/2) 05h set repeat rate and delay (AT,PS) BH = delay value (00h = 250ms to 03h = 1000ms) BL = repeat rate (00h=30/sec to 0Ch=10/sec [def] to 1Fh=2/sec) 06h get current typematic rate and delay (newer PS/2s) Return: BL = repeat rate (see above) BH = delay (see above) Note: use INT 16/AH=09h to determine whether some of the subfunctions are supported SeeAlso: INT 16/AH=09h,AH=29h"HUNTER",AH=2Ah"HUNTER" --------B-1604------------------------------- INT 16 - KEYBOARD - SET KEYCLICK (PCjr only) AH = 04h AL = keyclick state 00h off 01h on SeeAlso: AH=03h --------B-1605------------------------------- INT 16 - KEYBOARD - STORE KEYSTROKE IN KEYBOARD BUFFER (AT/PS w enh keybd only) AH = 05h CH = scan code CL = ASCII character Return: AL = 00h if successful 01h if keyboard buffer full Note: under DESQview, the following "keystrokes" invoke the following actions when they are read from the keyboard buffer: 38FBh or FB00h switch to next window (only if main menu popped up) 38FCh or FC00h pop up DESQview main menu 38FEh or FE00h close the current window 38FFh or FF00h pop up DESQview learn menu SeeAlso: AH=00h,AH=71h,AH=FFh,INT 15/AX=DE10h --------B-1605------------------------------- INT 16 - KEYBOARD - SELECT KEYBOARD LAYOUT (PCjr only) AH = 05h AL = function 01h set keyboard layout to French 02h set keyboard layout to German 03h set keyboard layout to Italian 04h set keyboard layout to Spanish 05h set keyboard layout to UK 80h check if function supported Return: AL <> 80h if supported Return: ??? Note: this function is called by the DOS 3.2 KEYBxx.COM SeeAlso: AH=92h,AH=A2h --------B-1609------------------------------- INT 16 - KEYBOARD - GET KEYBOARD FUNCTIONALITY AH = 09h Return: AL = supported keyboard functions (see below) Note: this function is only available if bit 6 of the second feature byte returned by INT 15/AH=C0h is set SeeAlso: AH=03h,AH=0Ah,AH=10h,AH=11h,AH=12h,AH=20h,AH=21h,AH=22h,INT 15/AH=C0h Bitfields for supported keyboard functions: Bit(s) Description 7 reserved 6 INT 16/AH=20h-22h supported (122-key keyboard support) 5 INT 16/AH=10h-12h supported (enhanced keyboard support) 4 INT 16/AH=0Ah supported 3 INT 16/AX=0306h supported 2 INT 16/AX=0305h supported 1 INT 16/AX=0304h supported 0 INT 16/AX=0300h supported --------B-160A------------------------------- INT 16 - KEYBOARD - GET KEYBOARD ID AH = 0Ah Return: BX = keyboard ID or 0000h if no keyboard attached Note: check return value from AH=09h to determine whether this function is supported SeeAlso: AH=09h --------B-1610------------------------------- INT 16 - KEYBOARD - GET ENHANCED KEYSTROKE (enhanced kbd support only) AH = 10h Return: AH = BIOS scan code AL = ASCII character Notes: if no keystroke is available, this function waits until one is placed in the keyboard buffer the BIOS scan code is usually, but not always, the same as the hardware scan code processed by INT 09. It is the same for ASCII keystrokes and most unshifted special keys (F-keys, arrow keys, etc.), but differs for shifted special keys. unlike AH=00h, this function does not discard extended keystrokes INT 16/AH=09h can be used to determine whether this function is supported, but only on later model PS/2s SeeAlso: AH=00h,AH=09h,AH=11h,AH=20h --------B-1611------------------------------- INT 16 - KEYBOARD - CHECK FOR ENHANCED KEYSTROKE (enh kbd support only) AH = 11h Return: ZF set if no keystroke available ZF clear if keystroke available AH = BIOS scan code AL = ASCII character Notes: if a keystroke is available, it is not removed from the keyboard buffer unlike AH=01h, this function does not discard extended keystrokes some versions of the IBM BIOS Technical Reference erroneously report that CF is returned instead of ZF INT 16/AH=09h can be used to determine whether this function is supported, but only on later model PS/2s SeeAlso: AH=01h,AH=09h,AH=10h,AH=21h --------B-1612------------------------------- INT 16 - KEYBOARD - GET EXTENDED SHIFT STATES (enh kbd support only) AH = 12h Return: AL = shift flags 1 (same as returned by AH=02h) (see below) AH = shift flags 2 (see below) Notes: AL bit 3 set only for left Alt key on many machines AH bits 7 through 4 always clear on a Compaq SLT/286 INT 16/AH=09h can be used to determine whether this function is supported, but only on later model PS/2s SeeAlso: AH=02h,AH=09h,AH=22h,AH=51h,INT 17/AH=0Dh Bitfields for shift flags 1: Bit(s) Description 7 Insert active 6 CapsLock active 5 NumLock active 4 ScrollLock active 3 Alt key pressed (either Alt on 101/102-key keyboards) 2 Ctrl key pressed (either Ctrl on 101/102-key keyboards) 1 left shift key pressed 0 right shift key pressed Bitfields for shift flags 2: Bit(s) Description 7 SysRq key pressed 6 CapsLock pressed 5 NumLock pressed 4 ScrollLock pressed 3 right Alt key pressed 2 right Ctrl key pressed 1 left Alt key pressed 0 left Ctrl key pressed --------B-1620------------------------------- INT 16 - KEYBOARD - GET 122-KEY KEYSTROKE (122-key kbd support only) AH = 20h Return: AH = BIOS scan code (see AH=10h for details) AL = ASCII character Note: use AH=09h to determine whether this function is supported SeeAlso: AH=00h,AH=09h,AH=10h,AH=21h,AH=22h --------b-1620------------------------------------ INT 16 - HUNTER 16 - SET TEMPORARY SHIFT AH = 20h AL = shift status bit 4 Scroll Lock on bit 5 Num Lock on bit 6 Caps Lock on Notes: the Husky Hunter 16 is an 8088-based ruggedized laptop. Other family members are the Husky Hunter, Husky Hunter 16/80, and Husky Hawk. the user can override the specified settings by pressing the keys --------B-1621------------------------------- INT 16 - KEYBOARD - CHECK FOR 122-KEY KEYSTROKE (122-key kbd support only) AH = 21h Return: ZF set if no keystroke available ZF clear if keystroke available AH = BIOS scan code AL = ASCII character Notes: use AH=09h to determine whether this function is supported some versions of the IBM BIOS Technical Reference erroneously report that CF is returned instead of ZF SeeAlso: AH=01h,AH=09h,AH=11h,AH=20h,AH=21h --------b-1621------------------------------------ INT 16 - HUNTER 16 - CONTROL SHIFT KEYS AH = 21h AL = shift keys to control (see AH=02h shift states) BL = shift state for disabled keys Note: If a bit in AL is set the key is disabled and set to the state of the corresponding bit in BL SeeAlso: AH=20h"HUNTER",AH=22h"HUNTER" --------B-1622------------------------------- INT 16 - KEYBOARD - GET 122-KEY SHIFT STATUS (122-key kbd support only) AH = 22h Return: AL = shift flags 1 (see AH=12h) AH = shift flags 2 (see AH=12h) Note: use AH=09h to determine whether this function is supported SeeAlso: AH=02h,AH=09h,AH=12h,AH=20h,AH=21h --------b-1622------------------------------------ INT 16 - HUNTER 16 - CONTROL CTRL-ALT-DEL AH = 22h AL = new Ctrl-Alt-Del state (00h enabled, nonzero disabled) BX = 0708h CX = 0910h DX = 1112h Return: AL = 00h if successful SeeAlso: AH=21h"HUNTER",AH=23h"HUNTER",AH=2Ah --------b-1623------------------------------------ INT 16 - HUNTER 16 - CONTROL EMERGENCY BREAKOUT AH = 23h AL = new state of breakout (00h enabled, nonzero disabled) BX = 0708h CX = 0910h DX = 1112h Return: AL = 00h if successful Desc: Enables or disables the emergency breakout feature, where the Hunter 16 at power on checks whether the X and P keys are pressed. If so the machine will boot rather than continue the running program SeeAlso: AH=22h"HUNTER" --------b-1624------------------------------------ INT 16 - HUNTER 16 - REDEFINE KEY CODES AH = 24h AL = Matrix Code (see below) BL = new Key code Return: AL = status (00h successful, nonzero failed) SeeAlso: AH=2Bh,AH=2Ch Values for Matrix Code: Code Key Code Key Code Key 00h Esc key 1Eh Space 3Bh L 01h 1 21h 0 3Ch , 02h Q 22h - 3Eh Right shift 03h Tab 23h ' 42h 8 04h Num Lock 24h Keypad 4 43h 7 05h \ 25h Enter 44h U 08h LShift 26h Keypad 7 45h I 09h Ctrl 27h . 46h J 0Ah "Paw" key 28h Keypad 1 47h K 0Bh 2 29h Keypad 0 48h M 0Ch W 2Ch = 49h N 0Dh A 2Dh Backspace 4Ah / 0Eh S 2Eh Keypad 8 4Dh 6 0Fh Z 2Fh Keypad 9 4Eh 5 11h Alt 30h Keypad 5 4Fh T 16h 4 31h Keypad 6 50h Y 17h 3 32h Keypad 2 51h G 18h E 33h Keypad 3 52h H 19h R 34h Keypad . 53h B 1Ah D 37h 9 54h V 1Bh F 38h O 55h # 1Ch X 39h P 58h Pwr 1Dh C 3Ah ; 59h Shift Pwr --------b-1625------------------------------------ INT 16 - HUNTER 16 - RESET KEYBOARD AH = 25h Return: AL = 00h Desc: restores the standard keyboard layout after any remapping SeeAlso: AH=24h,AH=2Bh,AH=2Ch --------b-1626------------------------------------ INT 16 - HUNTER 16 - CONTROL KEYCLICK AH = 26h AL = new state of keyclicks (00h disabled, 01h enabled) Return: AL = 00h SeeAlso: AH=2Ah --------b-1627------------------------------------ INT 16 - HUNTER 16 - CONTROL SCREEN DUMP AREA AH = 27h AL = what to dump 00h whole (virtual) window 01h LCD window only Return: AL = 00h Desc: control whether printscren dumps the whole 80x25 screen or only the part displayed in the LCD window Note: the Hunter 16 has a 240x64 LCD display which serves as a window into a 640x200 virtual screen --------b-1629------------------------------------ INT 16 - HUNTER 16 - GET KEY REPEAT AH = 29h Return: BL = Typematic rate (characters per second) (see below) BH = delay (00h = 250ms, 01h = 500ms, 02h = 750ms, 03h = 1s) SeeAlso: AH=03h,AH=2Ah Values for Typematic rate: 00h 30.0 08h 15.0 10h 7.5 18h 3.7 01h 26.7 09h 13.3 11h 6.7 19h 3.3 02h 24.0 0Ah 12.0 12h 6.0 1Ah 3.0 03h 21.8 0Bh 10.9 13h 5.5 1Bh 2.7 04h 20.0 0Ch 10.0 14h 5.0 1Ch 2.5 05h 18.5 0Dh 9.2 15h 4.6 1Dh 2.3 06h 17.1 0Eh 8.6 16h 4.3 1Eh 2.1 07h 16.0 0Fh 8.0 17h 4.0 1Fh 2.0 SeeAlso: AH=2Ah --------b-162A------------------------------------ INT 16 - HUNTER 16 - CONTROL KEY REPEAT AH = 2Ah AL = new state of keyboard autorepeat (00h disabled, 01h enabled) SeeAlso: AH=03h,AH=26h,AH=29h,AH=2Bh --------b-162B------------------------------------ INT 16 - HUNTER 16 - REDEFINE KEY SCAN CODES AH = 2Bh AL = which key table to redefine 00h unshifted 01h shifted 02h Numlock BH = standard scan code of key (00h-80h) BL = new scan code Desc: redefine the generated scan code from BH to BL SeeAlso: AH=24h,AH=2Ah,AH=2Ch --------b-162C------------------------------------ INT 16 - HUNTER 16 - REDEFINE PAW KEY CODES AH = 2Ch AL = Matrix code of key (see AH=29h) BL = new key code Return: AL = status (00h success, nonzero failed) Desc: redefine the key code generated by holding the PAW key down and pressing the key in AL SeeAlso: AH=24h,AH=2Bh --------b-162D------------------------------------ INT 16 - HUNTER 16 - CONTROL BREAK KEYS AH = 2Dh AL = enabled break keys bit 0 Ctrl-C bit 1 Ctrl-Break BX = 0708h CX = 0910h DX = 1112h Return: AL = status (00h success, FFh failed) SeeAlso: AH=21h"HUNTER" --------U-164252----------------------------- INT 16 - TEXTCAP 2.0 - INSTALLATION CHECK AX = 4252h Return: AX = 5242h if installed Program: TEXTCAP 2.0 is a heavily modified (by Gisbert W. Selke) version of the PC Magazine utility CAPTURE written by Tom Kihlken SeeAlso: AX=4253h,AX=4254h --------U-164253----------------------------- INT 16 - TEXTCAP 2.0 - UNINSTALL AX = 4253h Return: AX = segment of resident code Notes: the uninstall code does not check whether interrupt vectors have been chained by other programs the caller must free the main memory block (using the returned segment) SeeAlso: AX=4252h,AX=4254h --------U-164254----------------------------- INT 16 - TEXTCAP 2.0 - DUMP TEXT SCREEN TO FILE AX = 4254h Return: AX = status 4254h if screen dump will be written as soon as disk becomes idle 5442h if screen dump written SeeAlso: AX=4252h,AX=4253h --------e-164500----------------------------- INT 16 - Shamrock Software EMAIL - GET STATUS AX = 4500h DL = port number (01h = COM1) ES:BX -> 13-byte buffer for ASCIZ name Return: AX = 4D00h if EMAIL installed on specified port ES:BX -> "" if no connection -> "*" if connection but caller has not identified name -> name otherwise CX = version (CH = major, CL = minor) DL = privilege level of user (00h = guest) DH = chosen language (00h German, 01h English) SeeAlso: AX=4501h,AX=4502h --------e-164501----------------------------- INT 16 - Shamrock Software EMAIL - GET ELAPSED ONLINE TIME AND MAXIMUM TIME AX = 4501h DL = port number (01h = COM1) Return: AX = 4D00h if EMAIL installed on specified port BX = maximum connect time in clock ticks CX = maximum connect time for guests (without name) in clock ticks DX = elapsed connect time of current user in clock ticks SeeAlso: AX=4500h --------e-164502----------------------------- INT 16 - Shamrock Software EMAIL - GET CURRENT COMMUNICATIONS PARAMETERS AX = 4502h DL = port number (01h = COM1) Return: AX = 4D00h if EMAIL installed on specified port BL = current value of serial port's Line Control Register BH = flags bit 0: ISO code bit 1: pause bit 2: linefeed bit 3: ANSI sequences CX = selected country code (33 = France, 49 = Germany, etc) DX = baudrate divisor (115200/DX = baudrate) SeeAlso: AX=4500h --------e-164503----------------------------- INT 16 - Shamrock Software EMAIL - SPECIFY COMMAND-WORD FOR USER FUNCTION AX = 4503h DL = port number (01h = COM1) DH = maximum execution time in clock ticks (00h = 5 seconds) ES:BX -> ASCIZ string with new user command-word Return: AX = 4D00h if EMAIL installed on specified port Notes: a single user command (consisting of only uppercase letters and digits) may be defined, and remains valid until it is overwritten or the EMAIL program terminates; the user command must be activated by calling AX=4504h at least once. an existing command word may be redefined with this function SeeAlso: AX=4504h,AX=4505h --------e-164504----------------------------- INT 16 - Shamrock Software EMAIL - CHECK FOR USER FUNCTION COMMAND-WORD AX = 4504h DL = port number (01h = COM1) ES:BX -> 80-byte buffer for ASCIZ user input line Return: AX = 4D00h if EMAIL installed on specified port DL = flags bit 0: user function supported (always set) bit 1: user entered user-function command word if DL bit 1 set, ES:BX buffer contains line entered by user which begins with the defined command word and has been converted to all caps Note: caller must process the returned commandline and invoke AX=4505h within five seconds with the result of that processing SeeAlso: AX=4503h,AX=4505h --------e-164505----------------------------- INT 16 - Shamrock Software EMAIL - SEND RESULT OF USER FUNCTION AX = 4505h DL = port number (01h = COM1) DH = error flag bit 3: set on error ES:BX -> ASCIZ text to return to user, max 1024 bytes Return: AH = 4Dh if EMAIL installed on specified port AL = status 00h successful 02h unable to perform function (timeout, prev call not complete) other error Notes: if the error flag in DH is set, the string is not sent and an error message is generated instead; if this function is not called within five seconds of AX=4504h, EMAIL automatically generates an error message the string is copied into an internal buffer, allowing this function's caller to continue immediately SeeAlso: AX=4503h,AX=4504h,INT 17/AX=2400h --------e-164506----------------------------- INT 16 - Shamrock Software EMAIL - MONITOR XMODEM DOWNLOAD AX = 4506h DL = port number (01h = COM1) ES:BX -> 13-byte buffer for ASCIZ filename Return: AX = 4D00h if EMAIL installed on specified port DH = Xmodem status 00h no XGET command given 01h XGET in progress 02h XGET completed successfully ES:BX buffer filled with last filename given to XGET command (without path) Note: DH=02h will only be returned once per XGET; subsequent calls will return DH=00h SeeAlso: AX=4500h,INT 17/AX=2408h --------K-164D4F----------------------------- INT 16 - M16_KBD.COM v5.6 - INSTALLATION CHECK AX = 4D4Fh Return: AX = 6F6Dh if installed ES = segment of resident code Program: M16_KBD is a shareware Cyrillic keyboard driver by I.V. Morozov SeeAlso: INT 10/AX=1130h/BX=4D4Fh --------J-165000----------------------------- INT 16 - KEYBOARD - AX PC - SET KEYBOARD COUNTRY CODE AX = 5000h BX = country code 0001h USA (English), 0051h Japan Return: AL = status 00h successful 01h bad country code 02h other error SeeAlso: AX=5001h,INT 10/AX=5000h,INT 17/AX=5000h --------J-165001----------------------------- INT 16 - KEYBOARD - AX PC - GET KEYBOARD COUNTRY CODE AX = 5001h Return: AL = status 00h successful BX = country code 02h error SeeAlso: AX=5000h,INT 10/AX=5001h,INT 17/AX=5001h --------J-1651------------------------------- INT 16 - KEYBOARD - AX PC - READ SHIFT KEY STATUS AH = 51h Return: AL = standard shift key states (see AH=12h) AH = Kana lock (00h off, 01h on) SeeAlso: AH=02h,AH=12h,AH=22h --------t-165453BX5242----------------------- INT 16 - TSRBONES - INSTALLATION CHECK AX = 5453h ('TS') BX = 5242h ('RB') CX = 4F4Eh ('ON') DX = 4553h ('ES') Return: AX = 4553h if installed BX = 4F4Eh if installed CX = 5242h if installed DX = 5453h if installed Program: TSRBONES is a skeletal TSR framework by Robert Curtis Davis Note: these values are the default as the TSRBONES package is distributed, but will normally be changed when implementing an actual TSR with the TSRBONES skeleton SeeAlso: INT 2D"AMIS" --------A-165500----------------------------- INT 16 C - Microsoft Word internal - MICROSOFT WORD COOPERATION WITH TSR AX = 5500h Return: AX = 4D53h ('MS') if keyboard TSR present Notes: during startup, Microsoft Word tries to communicate with any TSRs that are present through this call. if the return is not 4D53h, Word installs its own INT 09 and INT 16 handlers; otherwise it assumes that the TSR will handle the keyboard SeeAlso: INT 1A/AX=3601h --------A-1655FEDX0000----------------------- INT 16 CU - Microsoft QBASIC internal - MICROSOFT COOPERATION WITH TSR??? AX = 55FEh DX = 0000h ES:BX -> ??? function ES:CX -> ??? structure Return: AX = result 4D4Bh only the INT 1B handler will be installed. <> 4D4Bh handlers for INT 08, INT 09, INT 16, INT 1B, and INT 1C are installed Notes: The pointer in ES:CX seems to point at a structure defining a callback function when new keyboard keys are pressed. If a TSR returns AX=4D4Bh, QBASIC will stop (with IRQ's and interrupts enabled). SeeAlso: INT 16/AX=5500h,INT 1A/AX=3601h --------U-1655FF----------------------------- INT 16 - Swap Utilities - ??? AX = 55FFh BX >= 0004h CX = function 0000h set ??? flag other clear ??? flag Note: present in SWAPSH and SWAPDT v1.77j, distributed with PC Tools v7, as well as the Trusted Access SCRNBLNK.COM; this may be part of the standard TesSeRact library SeeAlso: INT 2F/AX=5453h --------c-165758BX4858----------------------- INT 16 U - Netroom CACHECLK - INSTALLATION CHECK AX = 5758h BX = 4858h ('HX') DX = 4443h ('DC') CX <> 5758h Return: BX = 6878h if installed CX = 6463h if installed AX = code segment of TSR CX = internal version??? (v3.00 returns 0100h) Program: CACHECLK is a "cloaked" disk cache included with Netroom Notes: if CX=5758h on entry, CACHECLK returns with all registers unchanged the cache statistics are located early in the segment pointed at by AX on return ----------165758BX5754----------------------- INT 16 U - Netroom ??? - ??? AX = 5758h BX = 5754h ??? Return: ??? ----------165758BX5755----------------------- INT 16 U - Netroom ??? - ??? AX = 5758h BX = 5755h DS:SI -> ??? Return: ??? ----------165758BX5756----------------------- INT 16 U - Netroom ??? - INSTALLATION CHECK AX = 5758h BX = 5756h Return: BX <> 5756h if installed --------m-165758BX5858----------------------- INT 16 U - Netroom PRENET - GET OLD INTERRUPT VECTORS AX = 5758h BX = 5858h Return: CF clear DX:BX -> saved copy of interrupt vector table Note: the installation check consists of calling this function and comparing BX against 5858h on return; if it has changed, PRENET is installed SeeAlso: AX=5758h/BX=5859h Index: installation check;Netroom PRENET --------m-165758BX5859----------------------- INT 16 U - Netroom POSTNET - GET OLD INTERRUPT VECTORS AX = 5758h BX = 5859h Return: CF clear DX:BX -> saved copy of interrupt vector table Note: the installation check consists of calling this function and comparing BX against 5859h on return; if it has changed, POSTNET is installed SeeAlso: AX=5758h/BX=5858h Index: installation check;Netroom POSTNET --------U-166969BX6968----------------------- INT 16 - PC Tools v5.1+ BACKTALK - UNHOOK AX = 6969h BX = 6968h Return: resident code unhooked, but not removed from memory Index: uninstall;BACKTALK --------U-166969BX6969----------------------- INT 16 - PC Tools v5.1+ BACKTALK - INSTALLATION CHECK AX = 6969h BX = 6969h DX = 0000h Return: DX nonzero if installed BX = CS of resident code DX = PSP segment of resident code DS:SI -> ASCIZ identification string "CPoint Talk" --------i-166A6B----------------------------- INT 16 U - FastJuice - DISABLE/UNLOAD??? AX = 6A6Bh Return: ??? Program: FastJuice is a resident battery-power monitor by SeaSide Software SeeAlso: AX=7463h Index: uninstall;FastJuice --------G-166C63----------------------------- INT 16 U - TMED v1.6a - INSTALLATION CHECK AX = 6C63h ('lc') Return: AX = 4C43h ('LC') if installed Program: TMED is a freeware resident memory editor by Liang Chen --------b-166F00BX0000----------------------- INT 16 - HP HIL Vectras - HP HIL Extended BIOS INSTALLATION CHECK AX = 6F00h BX = 0000h Return: BX = 4850h if present Notes: called by recent MS Mouse drivers looking for an HP-HIL mouse supported by ES, QS, and RS series HP Vectras SeeAlso: AX=6F0Dh --------b-166F0D----------------------------- INT 16 - HP HIL Vectras - GET HIL Extended BIOS INTERRUPT NUMBER AX = 6F0Dh Return: AH = interrupt number (default 6Fh, 02h means 6Fh as well) Note: called by MS Windows HPSYSTEM.DRV and HPEBIOS.386 to support the HP-HIL input system SeeAlso: AX=6F0Eh,INT 6F"HP" --------b-166F0E----------------------------- INT 16 - HP HIL Vectras - SET HIL Extended BIOS INTERRUPT NUMBER AX = 6F0Eh BL = new interrupt number (60h-6Fh,78h-7Fh) Return: AH = status (00h = successful) Desc: allows the HIL Extended BIOS software to use a non-default interrupt number in case of an interrupt conflict with another application Note: called by MS Windows HPSYSTEM.DRV and HPEBIOS.386 to support the HP-HIL input system SeeAlso: AX=6F0Dh,INT 6F"HP" --------K-1670------------------------------- INT 16 - FAKEY.COM - INSTALLATION CHECK AH = 70h Return: AX = 1954h if installed Program: FAKEY is a keystroke faking utility by System Enhancement Associates --------K-1671------------------------------- INT 16 - FAKEY.COM - PUSH KEYSTROKES AH = 71h CX = number of keystrokes DS:SI -> array of words containing keystrokes to be returned by AH=00h Program: FAKEY is a keystroke faking utility by System Enhancement Associates SeeAlso: AH=05h,AH=72h --------K-1672------------------------------- INT 16 - FAKEY.COM - CLEAR FAKED KEYSTROKES AH = 72h Program: FAKEY is a keystroke faking utility by System Enhancement Associates SeeAlso: AH=71h --------K-1673------------------------------- INT 16 - FAKEY.COM - PLAY TONES AH = 73h CX = number of tones to play DS:SI -> array of tones (see below) Program: FAKEY is a keystroke faking utility by System Enhancement Associates SeeAlso: INT 15/AX=1019h Format of tone array entries: Offset Size Description 00h WORD divisor for timer channel 2 02h WORD duration in clock ticks --------i-167463----------------------------- INT 16 U - FastJuice - INSTALLATION CHECK AX = 7463h ("tc") Return: AX = 5443h ("TC") if installed Program: FastJuice is a resident battery-power monitor by SeaSide Software SeeAlso: AX=6A6Bh --------R-1675------------------------------- INT 16 - pcANYWHERE III - SET TICK COUNT FOR SCANNING AH = 75h AL = number of ticks between checks for new screen changes --------R-1676------------------------------- INT 16 - pcANYWHERE III - SET ERROR CHECKING TYPE AH = 76h AL = error checking type 00h none 01h fast 02h slow --------R-1677------------------------------- INT 16 - pcANYWHERE III - LOG OFF AH = 77h AL = mode 00h wait for another call 01h leave in Memory Resident Mode 02h leave in Automatic Mode FFh leave in current operating mode --------U-167761----------------------------- INT 16 - WATCH.COM v2.x-v3.0 - INSTALLATION CHECK AX = 7761h ('wa') Return: AX = 5741h ('WA') if installed Note: WATCH.COM is part of the "TSR" package by Kim Kokkonen SeeAlso: INT 21/AX=7761h --------U-167788BX7789----------------------- INT 16 - PC Magazine PUSHDIR.COM - INSTALLATION CHECK AX = 7788h BX = 7789h DS:SI -> signature "PUSHDIR VERSION 1.0" Return: AX = 7789h if installed and signature correct BX = 7788h SI destroyed --------R-1679------------------------------- INT 16 - pcANYWHERE III - CHECK STATUS AH = 79h Return: AX = status FFFFh if resident and active FFFEh if resident but not active FFFDh if in Memory Resident mode FFFCh if in Automatic mode other value if not resident SeeAlso: AX=7B00h,INT 21/AX=2B44h --------R-167A------------------------------- INT 16 - pcANYWHERE III - CANCEL SESSION AH = 7Ah --------R-167B00----------------------------- INT 16 - pcANYWHERE III - SUSPEND AX = 7B00h SeeAlso: AH=79h,AX=7B01h --------R-167B01----------------------------- INT 16 - pcANYWHERE III - RESUME AX = 7B01h SeeAlso: AH=79h,AX=7B00h --------R-167C------------------------------- INT 16 - pcANYWHERE III - GET PORT CONFIGURATION AH = 7Ch Return: AH = port number AL = baud rate 00h = 50 baud 01h = 75 baud 02h = 110 baud 03h = 134.5 baud 04h = 150 baud 05h = 300 baud 06h = 600 baud 07h = 1200 baud 08h = 1800 baud 09h = 2000 baud 0Ah = 2400 baud 0Bh = 4800 baud 0Ch = 7200 baud 0Dh = 9600 baud 0Eh = 19200 baud --------R-167D------------------------------- INT 16 - pcANYWHERE III - GET/SET TERMINAL PARAMETERS AH = 7Dh AL = subfunction 00h set terminal parameters 01h get terminal parameters 02h get configuration header and terminal parameters DS:CX -> terminal parameter block --------R-167E------------------------------- INT 16 - pcANYWHERE III - COMMUNICATIONS I/O THROUGH PORT AH = 7Eh AL = subfunction 01h port input status Return AX = 0 if no characer ready, AX = 1 if character ready 02h port input character Return AL = received character 03h port output character in CX 11h hang up phone --------R-167F------------------------------- INT 16 - pcANYWHERE III - SET KEYBOARD/SCREEN MODE AH = 7Fh AL = subfunction 00h enable remote keyboard only 01h enable host keyboard only 02h enable both keyboards 08h display top 24 lines 09h display bottom 24 lines 10h Hayes modem 11h other modem 12h direct connect --------U-1680------------------------------- INT 16 - MAKEY.COM - INSTALLATION CHECK AH = 80h Return: AX = 1954h if installed Program: MAKEY is a utility by System Enhancement Associates --------U-168765BX4321----------------------- INT 16 - AT.COM version 8/26/87 - API AX = 8765h BX = 4321h CX = ??? or FFFFh if CX = FFFFh DX = number of event to remove or FFFFh Return: ES:BX -> event record array Program: AT.COM is a resident scheduler by Bill Frolik Format of event record: Offset Size Description 00h BYTE in-use flag (00h free, 01h in use, FFh end of array) 01h BYTE day of date on which to trigger 02h BYTE month of date on which to trigger 03h BYTE trigger time, minute 04h BYTE trigger time, hour 05h WORD offset of command to be executed ----------1692------------------------------- INT 16 - ??? AH = 92h Return: AH <= 80h if ??? Note: this function is called by the DOS 3.2 KEYBxx.COM and DOS 5+ KEYB.COM SeeAlso: AH=05h"PCjr",AH=A2h --------U-1699------------------------------- INT 16 - SCOUT v5.4 - GET ??? AH = 99h Return: AX = ABCDh BX:CX -> ??? (appears to be start of PSP for resident portion) Program: Scout is a memory-resident file manager by New-Ware SeeAlso: AH=9Eh --------U-169E------------------------------- INT 16 - SCOUT v5.4 - INSTALLATION CHECK AH = 9Eh Return: AX = ABCDh if installed Program: Scout is a memory-resident file manager by New-Ware SeeAlso: AH=99h ----------16A2------------------------------- INT 16 - ??? AH = A2h Return: AH <= 80h if ??? Note: this function is this function is called by the DOS 5+ KEYB.COM SeeAlso: AH=92h --------V-16AA------------------------------- INT 16 - PTxxx.COM - (xxx=CGA,EGA,VGA,HER...) CALL GATE FOR GRAPHICS AH = AAh Various registers set up by high level language. Return: Graphics performed Note: PT stands for Paint Tools which is a graphics library for Turbo Pascal, Modula 2 and others from DataBiten in Sweden. The library is installed as a memory resident driver. --------U-16AABBBXEEFF----------------------- INT 16 U - JORJ v4.3 - INSTALLATION CHECK AX = AABBh BX = EEFFh Return: AX = EEFFh if installed BX = AABBh if installed CL = hotkey name (default 6Ah 'j' for Alt-J) Program: JORJ is a shareware dictionary with phonetic lookup by Jorj Software Co. Index: hotkeys;JORJ --------m-16B0B1----------------------------- INT 16 - VGARAM v1.00 - INSTALLATION CHECK AX = B0B1h ES:DI -> 6 byte signature "VGARAM" Return: AX = B1B0h if installed, DS:BX -> VGARAM Status byte: 0 = OFF, 1 = ON Program: VGARAM is a utility by Brett Warthen which makes VGA memory which is not used in text modes available for DOS --------K-16CA--BX736B----------------------- INT 16 - CtrlAlt Associates STACKEY.COM v3.00 - API AH = CAh BX = 736Bh ("sk") CX = 736Bh AL = function 00h installation check Return: DX = words available in keyboard buffer 01h place keystroke in buffer DX = keystroke (DH = scan code, DL = ASCII character) Return: DX = words available in keyboard buffer FFFFh on error 02h flush STACKEY and BIOS keyboard buffers Return: AX = CAFFh if installed BX = segment of resident code CX = STACKEY version (CH = major, CL = minor) Program: STACKEY is a shareware keyboard-input faking TSR Index: installation check;STACKEY --------V-16CA00BX6570----------------------- INT 16 - CtrlAlt Associates EGAPAL.COM v1.00 - INSTALLATION CHECK AX = CA00h BX = 6570h ("ep") CX = 6570h Return: AX = CAFFh if installed BX = segment of resident code CX = ??? (0090h) Program: EGAPAL is a TSR supplied with STACKEY which makes EGA palette settings permanent across mode switches SeeAlso: AX=CA00h/BX=7670h --------V-16CA00BX7670----------------------- INT 16 - CtrlAlt Associates VGAPAL.COM v1.00 - INSTALLATION CHECK AX = CA00h BX = 7670h ("vp") CX = 7670h Return: AX = CAFFh if installed BX = segment of resident code CX = ??? (0090h) Program: VGAPAL is a TSR supplied with STACKEY which makes VGA palette settings permanent across mode switches SeeAlso: AX=CA00h/BX=6570h --------U-16D724CX00CB----------------------- INT 16 U - APCAL v3.20 - GET ??? AX = D724h CX = 00CBh Return: AX = 0000h BX = 0000h DX:CX -> ??? or 0000h:0000h Program: APCAL is an optionally-resident shareware appointment calendar by Gamma Software SeeAlso: AX=D724h/CX=00CCh,AX=D724h/CX=00CDh --------U-16D724CX00CC----------------------- INT 16 U - APCAL v3.20 - GET ??? AX = D724h CX = 00CCh Return: AX = 0000h BX = 0000h DX:CX -> ??? (apparently an internal data area) SeeAlso: AX=D724h/CX=00CBh,AX=D724h/CX=00CDh --------U-16D724CX00CD----------------------- INT 16 U - APCAL v3.20 - GET ??? AX = D724h CX = 00CDh Return: AX = ??? (5345h seen) SeeAlso: AX=D724h/CX=00CBh,AX=D724h/CX=00CCh --------t-16E0E0----------------------------- INT 16 - TurboPower TSRs - ALTERNATE INSTALLATION CHECK AX = E0E0h Return: AX = 1F1Fh if installed DWORD 0040h:00F0h -> last data block in TSR list (see AX=F0F0h) Note: the returned TSR list provides support for communication among TSRs built with TurboPower's Turbo Professional and Object Professional libraries for Turbo Pascal SeeAlso: AX=F0F0h --------U-16ED--BHED------------------------- INT 16 - BORLAND TURBO LIGHTNING - API AH = EDh BH = EDh BL = function 00h installation check Return: AX = 5205h CH = major version CL = minor version 01h identical to function 00h??? 02h get resident data segment Return: AX = data segment of resident portion 03h get resident ??? Return: AX = offset of some buffer in resident code seg 04h redefine auxiliary dictionary DS:SI -> counted filename string Return: AL = result code 05h select active environment AL = environment (00h to 0Ch) Return: AX = status 0000h if OK 0001h if out of range 06h toggle AutoProof??? AL = state (00h off, 01h on) 07h ??? 08h ??? AL = char??? CX = ??? DX = ??? Return: AX = 0, 1 or 2 09h ??? 0Ah ??? CX = ??? DX = ??? Return: AX = ??? 0Bh check dictionary integrity??? DS:SI -> counted dictionary filename string Return: AX = 0, 40h, 80h 0Ch spellcheck string (disk dictionary, possibly RAM dict as well) DS:SI -> counted string to check Return: AH = 0 AL = result code 00h string found in dictionary 20h string begins more than one word 40h string not found 0Dh set ??? (sets an internal flag) 0Eh spellcheck string (RAM dictionary only) DS:SI -> counted string to check Return: AH = 00h AL = result code 00h string found in dictionary 01h string not found 02h ??? 0Fh ??? 10h ??? Notes: AX in general returns an error code from most functions. Index: installation check;Turbo Lightning --------U-16EF------------------------------- INT 16 - CALCULATOR - INSTALLATION CHECK AH = EFh Return: AX = 0088h if installed Program: CALCULATOR is a shareware popup calculator by Andrzej Brzezinski and Marek Kosznik --------b-16F0------------------------------- INT 16 - Compaq 386 and newer - SET CPU SPEED AH = F0h AL = speed 00h equivalent to 6 MHz 80286 (COMMON) 01h equivalent to 8 MHz 80286 (FAST) 02h full 16 MHz (HIGH) 03h toggles between 8 MHz-equivalent and speed set by system board switch (AUTO or HIGH) 08h full 16 MHz except 8 MHz-equivalent during floppy disk access 09h specify speed directly CX = speed value, 1 (slowest) to 50 (full), 3 ~= 8088 SeeAlso: AH=F1h,AH=F3h --------t-16F0F0----------------------------- INT 16 - TurboPower TSRs - INSTALLATION CHECK AX = F0F0h Return: AX = 0F0Fh if installed ES:DI -> last data block in TSR list Note: the returned TSR list provides support for communication among TSRs built with TurboPower's Turbo Professional and Object Professional libraries for Turbo Pascal SeeAlso: AX=E0E0h Format of data block: Offset Size Description 00h DWORD pointer to program tag (counted ASCII string) 04h WORD interface version number (0400h) 06h DWORD pointer to command entry point 0Ah DWORD pointer to previous data block (0000h:0000h if none) 0Eh DWORD pointer to next data block (0000h:0000h if none) ---swappable TSRs only--- 12h DWORD pointer to swapping data 16h DWORD pointer to user data more??? --------b-16F1------------------------------- INT 16 - Compaq 386 and newer - READ CURRENT CPU SPEED AH = F1h Return: AL = speed code (see AH=F0h) if AL = 09h, CX = speed code SeeAlso: AH=F0h,AH=F3h --------b-16F2------------------------------- INT 16 - Compaq 386 and newer - DETERMINE ATTACHED KEYBOARD TYPE AH = F2h Return: AL = type 00h if 11-bit AT keyboard is in use 01h if 9-bit PC keyboard is in use AH = 00h (04/08/93 system ROM) --------b-16F3------------------------------- INT 16 - Compaq 80286s - SET CPU SPEED LIMIT (OVERRIDE JUMPER) AH = F3h AL = new limit 00h limit is 6 Mhz 01h limit is 8 Mhz/6 Mhz SeeAlso: AH=F0h,AH=F1h --------U-16F398----------------------------- INT 16 U - NORTON GUIDES - INSTALLATION CHECK AX = F398h Return: AX = 6A73h ("js") BH = scan code of current hot key BL = ASCII code of current hot key Note: NG.EXE was written by John Socha --------b-16F400----------------------------- INT 16 - Compaq Systempro and higher - CACHE CONTROLLER STATUS AX = F400h Return: AH = E2h AL = status 00h not present 01h enabled 02h disabled SeeAlso: AX=F401h,AX=F402h --------b-16F401----------------------------- INT 16 - Compaq Systempro and higher - ENABLE CACHE CONTROLLER AX = F401h Return: AX = E201h SeeAlso: AX=F400h,AX=F402h --------b-16F402----------------------------- INT 16 - Compaq Systempro and higher - DISABLE CACHE CONTROLLER AX = F402h Return: AX = E202h SeeAlso: AX=F400h,AX=F401h --------v-16FA00DX5945----------------------- INT 16 U - PC Tools v8+ VSAFE, VWATCH - INSTALLATION CHECK AX = FA00h DX = 5945h Return: CF clear DI = 4559h BX = BIOS hotkey scancode (default 2F00h) (VSAFE only) FFFFh if disabled Note: MS-DOS 6.0 bundles VSAFE and VWATCH as part of its virus protection SeeAlso: AX=FA05h,INT 13/AH=FAh,INT 21/AH=FAh"VDEFEND",INT 2F/AX=6282h --------v-16FA01DX5945----------------------- INT 16 U - PC Tools v8+ VSAFE, VWATCH - UNINSTALL AX = FA01h DX = 5945h Return: CF clear if successful DI = 4559h SeeAlso: AX=FA00h --------v-16FA02DX5945----------------------- INT 16 U - PC Tools v8+ VSAFE, VWATCH - GET/SET OPTIONS AX = FA02h DX = 5945h BL = new parameter flags (see below) Return: CF clear DI = 4559h CL = old value of parameter flags Bitfields for parameter flags: Bit(s) Description 7 Protect executable files 6 Protect FD boot sector 5 Protect HD boot sector 4 Boot sector viruses 3 Check executable files 2 General write protect 1 Resident 0 HD Low level format --------v-16FA03DX5945----------------------- INT 16 U - PC Tools v8+ VSAFE, VWATCH - GET ??? AX = FA03h DX = 5945h Return: CF clear DI = 4559h AX = 0002h --------v-16FA04DX5945----------------------- INT 16 U - PC Tools v8+ VSAFE - GET HOTKEY DISABLE FLAG AX = FA04h DX = 5945h Return: CF clear DI = 4559h BL = hotkey disable flag (nonzero if hotkey disabled) Note: this function is a NOP under VWATCH, merely returning CF clear/DI=4559h SeeAlso: AX=FA00h,AX=FA05h --------v-16FA05DX5945----------------------- INT 16 U - PC Tools v8+ VSAFE - SET HOTKEY DISABLE FLAG AX = FA05h DX = 5945h BL = new value of hotkey disable flag (nonzero to disable hotkey) Return: CF clear DI = 4559h Note: this function is a NOP under VWATCH, merely returning CF clear/DI=4559h SeeAlso: AX=FA00h,AX=FA04h --------v-16FA06DX5945----------------------- INT 16 U - PC Tools v8+ VSAFE, VWATCH - GET NETWORK DRIVES TEST FLAG AX = FA06h DX = 5945h Return: CF clear DI = 4559h BL = test status 00h don't monitor network drives (default for VWATCH v2.1) FFh monitor network drives (default for VSAFE v2.0) CL = ??? (only VSAFE 2.0) SeeAlso: AX=FA07h --------v-16FA07DX5945----------------------- INT 16 U - PC Tools v8+ VSAFE, VWATCH - SET NETWORK DRIVES TEST FLAG AX = FA07h DX = 5945h BL = new state 00h don't monitor 01h monitor network drives Return: CF clear DI = 4559h Note: VWATCH v2.1 (from PC Tools 9.0) returns CF set instead SeeAlso: AX=FA00h,AX=FA06h --------v-16FA08DX5945----------------------- INT 16 U - PC Tools v9+ VWATCH v2.1 - ??? AX = FA08h DX = 5945h Return: CF clear DI = 4559h AX = ??? (0002h) BX = version (BH=major, BL=two-digit minor) Note: this function is not supported by the PC Tools 9.0 VSAFE v2.0 SeeAlso: AX=FA00h,AX=FA06h --------U-16FE55----------------------------- INT 16 U - PC Tools v8+ programs - GET ??? AX = FE55h CX = segment of resident program or 0000h for last loaded DX = 0000h Return: DX = resident code segment (unchanged if CX=0000h on entry) AX = ??? or 0000h Note: this call is supported by CPSCHED, CPTASK, DATAMON, DPROTECT, DRIVEMAP, and DSKLIGHT beginning in PC Tools v8.0; programs other than CPTASK seem to hook it merely to return the same AX as the CPTASK loaded prior to them returned --------U-16FEA4----------------------------- INT 16 U - PC Tools v7+ CPSCHED/DESKTOP - RESET ??? AX = FEA4h Return: nothing Note: this function is identical to AX=FFA4h, and is implemented by the same code in DESKTOP SeeAlso: AX=FFA4h --------U-16FEC6----------------------------- INT 16 U - PC Tools v7+ CPSCHED - ENABLE/DISABLE CPSCHED API AX = FEC6h BL = new state (00h enabled, nonzero disabled) Return: nothing Desc: specify whether CPSCHED API calls other than this one and AX=FE55h will be honored --------U-16FED3----------------------------- INT 16 U - PC Tools v7+ CPSCHED/DESKTOP - ??? AX = FED3h DS:SI -> 92-byte data record for ??? Return: ??? Note: this function is identical to AX=FFD3h, and is implemented by the same code in DESKTOP SeeAlso: AX=FFD3h --------U-16FEDC----------------------------- INT 16 U - PC Tools v7+ CPSCHED - UNHOOK INTERRUPTS AX = FEDCh Return: AX,DX destroyed Index: uninstall;CPSCHED --------U-16FEEFCX0000----------------------- INT 16 U - PC Tools v7+ CPSCHED/DESKTOP - INSTALLATION CHECK AX = FEEFh CX = 0000h Return: CX = ABCDh if PC Tools scheduler (CPSCHED or DESKTOP) installed BX = segment of resident portion DX = (CPSCHED v8.0) resident CS Note: this function is identical to AX=FFD3h, and is implemented by the same code in DESKTOP SeeAlso: AX=FFEFh --------U-16FEF1----------------------------- INT 16 U - PC Tools v7 only CPSCHED/DESKTOP - ALTERNATE INSTALLATION CHECK AX = FEF1h BX = ??? Return: CX = 5555h if PC Tools scheduler (CPSCHED or DESKTOP) installed DX = 5555h Note: this function is identical to AX=FFD3h, and is implemented by the same code in DESKTOP SeeAlso: AX=FFF1h --------K-16FF------------------------------- INT 16 - KEYBOARD - KBUF extensions - ADD KEY TO TAIL OF KEYBOARD BUFFER AH = FFh DX = scan code Return: AL = status 00h success 01h failure Program: KBUF is a keyboard buffer expander by Mark Adler SeeAlso: AH=05h --------V-16FF------------------------------- INT 16 - OPTIMA 1024 VGA-Sync,ET-3000 chipset - QUERY ZOOM INTERRUPT AH = FFh Return: AL = interrupt number to which BIOS keyboard handler has been relocated AL+1 = Zoom interrupt number BX = hotkey Notes: the default interrupts are 60h for keyboard and 61h for Zoom interrupt; the default hot key is F10 not all vendors include the Tseng TSR which supports these functions SeeAlso: INT 60"OPTIMA" Index: hotkeys;OPTIMA 1024 VGA --------d-16FF70BX0000----------------------- INT 16 U - PC Tools v8+ DRIVEMAP - INSTALLATION CHECK AX = FF70h BX = 0000h CX = 4C69h ('Li') DX = 6E6Bh ('nk') Return: AX = 0000h CX = 4350h ('CP') DH = major version DL = minor version Program: DRIVEMAP is a redirector which allows drives on computers connected over the parallel or serial ports to appear as local drives SeeAlso: AX=FF70h/BX=0001h,AX=FF70h/BX=0002h --------d-16FF70BX0001----------------------- INT 16 U - PC Tools v8+ DRIVEMAP - ??? AX = FF70h BX = 0001h DL = ??? Return: AX = ??? DH = ??? SeeAlso: AX=FF70h/BX=0000h,AX=FF70h/BX=0002h --------d-16FF70BX0002----------------------- INT 16 U - PC Tools v8+ DRIVEMAP - ??? AX = FF70h BX = 0002h CX = ??? DX = ??? Return: AX = ??? or FFFEh/FFFFh on error DL = ??? BUG: DRIVEMAP will branch to random locations for BX values other than those listed above for v8.0-9.0 because a) the incorrect register is range-tested, resulting in BX=0003h-5CD6h being accepted as valid function numbers, and b) the conditional which branches on invalid function numbers jumps to the following instruction, becoming a NOP SeeAlso: INT 2F/AX=9203h"DRIVEMAP" Index: installation check;DRIVEMAP --------T-16FF80BX0000----------------------- INT 16 U - PC Tools v8+ CPTASK - INSTALLATION CHECK AX = FF80h BX = 0000h CX = 0000h DX = 0000h Return: CX = 5555h if installed Program: CPTASK is a task switcher by Central Point Software --------T-16FF80BX0001----------------------- INT 16 U - PC Tools v8+ CPTASK - GET ??? AX = FF80h BX = 0001h ??? Return: DX:SI -> task list??? (ten entries of 70h bytes in v9.0) BX = ??? (PSP segment of resident code???) --------T-16FF80BX0002----------------------- INT 16 U - PC Tools v8+ CPTASK - GET ??? AX = FF80h BX = 0002h Return: DX:SI -> ??? --------T-16FF80BX0003----------------------- INT 16 U - PC Tools v8+ CPTASK - GET ??? FLAGS AX = FF80h BX = 0003h Return: AX = flags bit 10: ??? bit 13: ??? bit 14: ??? bit 15: ??? SeeAlso: AX=FF80h/BX=0004h,AX=FF80h/BX=0006h --------T-16FF80BX0004----------------------- INT 16 U - PC Tools v8+ CPTASK - SET ??? AX = FF80h BX = 0004h CX = new value of ??? Return: ??? Note: this function also sets bit 14 of the flags word returned by AX=FF80h/BX=0003h --------T-16FF80BX0005----------------------- INT 16 U - PC Tools v8+ CPTASK - GET NUMBER OF ACTIVE TASKS??? AX = FF80h BX = 0005h Return: AX = number of active tasks??? --------T-16FF80BX0006----------------------- INT 16 U - PC Tools v8+ CPTASK - GET AND CLEAR ??? FLAG AX = FF80h BX = 0006h Return: AX = old state (0000h clear, 0001h set) Note: the tested flag is bit 13 of the flags returned by AX=FF80h/BX=0003h --------T-16FF80BX0007----------------------- INT 16 U - PC Tools v8+ CPTASK - ??? AX = FF80h BX = 0007h ES:DI -> ??? ??? Return: ??? --------T-16FF80BX0008----------------------- INT 16 U - PC Tools v8+ CPTASK - ??? AX = FF80h BX = 0008h ??? Return: ??? --------T-16FF80BX0009----------------------- INT 16 U - PC Tools v8+ CPTASK - GET ??? AX = FF80h BX = 0009h Return: CL = ??? CH = ??? (01h or 02h) --------T-16FF80BX000A----------------------- INT 16 U - PC Tools v9+ CPTASK - SET ??? AX = FF80h BX = 000Ah DS:SI -> 128-byte buffer containing ??? --------T-16FF80BX000B----------------------- INT 16 U - PC Tools v9+ CPTASK - SET ??? AX = FF80h BX = 000Bh DX = index of ??? task (1-10) --------T-16FF80BX000C----------------------- INT 16 U - PC Tools v9+ CPTASK - SET IDLE??? DELAY AX = FF80h BX = 000Ch CX = new delay time in minutes --------T-16FF80BX4350----------------------- INT 16 U - PC Tools v8+ CPTASK - UNINSTALL AX = FF80h BX = 4350h ('CP') CX = 5354h ('ST') Return: never returns; terminates all tasks and exits to program originally calling CPTASK --------U-16FF90----------------------------- INT 16 U - PC Tools v8+ DESKTOP - ??? AX = FF90h ??? Return: ??? Note: available only when popped up --------U-16FF91----------------------------- INT 16 U - PC Tools v7+ DESKTOP - ??? AX = FF91h ??? Return: AX = 0000h Note: calls AX=FFFDh after ??? SeeAlso: AX=FF92h,AX=FFFDh --------U-16FF92----------------------------- INT 16 U - PC Tools v7+ DESKTOP - ??? AX = FF92h ??? Return: AX = 0000h Note: like AX=FF91h, but temporarily sets ??? to 3 SeeAlso: AX=FF91h,AX=FFFDh --------U-16FF93----------------------------- INT 16 U - PC Tools v7+ DESKTOP - SET ??? FLAG AX = FF93h --------U-16FF94----------------------------- INT 16 U - PC Tools v7+ DESKTOP - SET ??? AX = FF94h CX = ??? (default 0017h) --------U-16FF95----------------------------- INT 16 U - PC Tools v7+ DESKTOP - SET ??? AX = FF95h BX = ??? --------U-16FF96----------------------------- INT 16 U - PC Tools v7+ DESKTOP - ??? AX = FF96h CL = ??? Return: AX = ??? --------U-16FF97----------------------------- INT 16 U - PC Tools v7+ DESKTOP - ??? AX = FF97h DS:DX -> buffer for ??? (see below) Return: ??? Format of buffer: Offset Size Description 00h 48 BYTEs ??? 30h 128 BYTEs ??? --------U-16FF98----------------------------- INT 16 U - PC Tools v7+ DESKTOP - OPEN \DESK.OVL FILE AND SEEK TO OVERLAY AX = FF98h DX = byte offset in file of overlay header Return: BX = file handle for DESK.OVL file Desc: open the DESK.OVL file, seek to the specified offset, read in the overlay header, and seek to the offset specified by the header Format of overlay header: Offset Size Description 00h 12 BYTEs NUL-padded ASCII overlay filename 0Ch DWORD offset within DESK.OVL file of actual overlay --------U-16FF99----------------------------- INT 16 U - PC Tools v7+ DESKTOP - ??? AX = FF99h ??? Return: ??? --------U-16FF9A----------------------------- INT 16 U - PC Tools v7+ DESKTOP - GET NAME OF COLOR SCHEME AX = FF9Ah Return: ES:BX -> name of current color scheme Note: available even if not popped up --------U-16FF9B----------------------------- INT 16 U - PC Tools v7+ DESKTOP - UNUSED AX = FF9Bh Return: ??? Note: sounds triple-length beep --------T-16FF9C----------------------------- INT 16 U - PC Tools v8+ CPTASK - SET/CLEAR ??? POINTER AX = FF9Ch BL = function 00h set ??? pointer DS:SI -> ??? 01h clear pointer to 0000h:0000h ----------16FF9D----------------------------- INT 16 U - PC Tools v8+ CPTASK, VSAFE - ??? AX = FF9Dh ES:BX -> ??? word Return: ??? Note: if ES is non-zero, the word pointed at by ES:BX determines whether the ??? flag is cleared (word = 0000h) or set (word is nonzero). The flag is always cleared if ES=0000h. --------U-16FF9E----------------------------- INT 16 U - PC Tools v7+ DESKTOP - ??? AX = FF9Eh DL = ??? bit 7: ??? bits 6-0: function number??? (00h,01h,other) ??? Return: ??? --------U-16FFA1----------------------------- INT 16 U - PC Tools v7+ DESKTOP - ??? AX = FFA1h ??? Return: ??? Note: same as AX=FFA2h, except ??? set to FFh SeeAlso: AX=FFA2h --------U-16FFA2----------------------------- INT 16 U - PC Tools v7+ DESKTOP - ??? AX = FFA2h ??? Return: ??? Note: calls AX=FFC7h (remove window) and AX=FFFDh SeeAlso: AX=FFA1h,AX=FFC7h,AX=FFFDh --------y-16FFA3BX0000----------------------- INT 16 U - PC Tools v7-8 DATAMON, v9+ DPROTECT - INSTALLATION CHECK AX = FFA3h BX = 0000h CX = 0000h Return: AX = segment of resident code BX = 5555h CX = 5555h SeeAlso: INT 21/AH=3Fh"NB.SYS",INT 21/AX=4101h --------y-16FFA3BX0001----------------------- INT 16 U - PC Tools v7-8 DATAMON, v9+ DPROTECT - GET ??? AX = FFA3h BX = 0001h CX = 0001h Return: AX:BX -> ??? CX = BX --------y-16FFA3BX0002----------------------- INT 16 U - PC Tools v7-8 DATAMON, v9+ DPROTECT - GET ??? AX = FFA3h BX = 0002h CX = 0002h Return: AX = ??? (0 or 1) CX = BX = AX --------y-16FFA3BX0003----------------------- INT 16 U - PC Tools v7-8 DATAMON, v9+ DPROTECT - GET ??? AX = FFA3h BX = 0003h CX = 0003h Return: AX = ??? (0 or 1) CX = BX = AX --------y-16FFA3BX0004----------------------- INT 16 U - PC Tools v7+ DATAMON - SET ??? FLAG AX = FFA3h BX = 0004h CX = 0004h SeeAlso: AX=FFA3h/BX=0005h --------y-16FFA3BX0005----------------------- INT 16 U - PC Tools v7+ DATAMON - CLEAR ??? FLAG AX = FFA3h BX = 0005h CX = 0005h SeeAlso: AX=FFA3h/BX=0004h --------y-16FFA3BX0006----------------------- INT 16 U - PC Tools v7+ DATAMON - SET PSP SEGMENT ??? AX = FFA3h BX = 0006h CX = 0006h DX = current PSP segment as known to DOS??? or 0000h ----------16FFA3BXFFA3----------------------- INT 16 U - PC Tools v9 DSKLIGHT - INSTALLATION CHECK AX = FFA3h BX = FFA3h CX = FFA3h Return: BX = CX = 5555h if installed AX = resident code segment Program: DSKLIGHT is a TSR included with PC Tools v9+ which displays a disk- access indicator on the screen; in v7 and v8, this function was provided by DATAMON Note: DSKLIGHT chains to the previous handler if BX or CX is not FFA3h --------U-16FFA4----------------------------- INT 16 U - PC Tools v7-8 DESKTOP - ??? AX = FFA4h Return: ??? Notes: available even when not popped up sets unknown flag if ??? conditions met SeeAlso: AX=FEA4h --------c-16FFA5CX1111----------------------- INT 16 - PC-Cache v6+ - INSTALLATION CHECK AX = FFA5h CX = 1111h Return: CH = 00h if installed ES:DI -> internal data (see below) CL = cache state 01h enabled 02h disabled SeeAlso: INT 13/AH=27h,INT 13/AH=A0h,INT 21/AH=2Bh/CX=4358h Format of internal data: Offset Size Description -1Ch 20 BYTEs cached drive list, one byte per drive A: to T: each byte is either blank (20h) or drive letter (41h-54h) -8 BYTE ??? -7 WORD number of physical transfers (scaled down to 0000h-7FFFh) -5 WORD number of saved transfers (scaled down to 0000h-7FFFh) -3 3 BYTEs ??? --------c-16FFA5CXAAAA----------------------- INT 16 - PC-Cache v6+ - ENABLE DELAYED WRITES AX = FFA5h CX = AAAAh Return: AX = ??? (apparently either 0000h or sectors_in_cache - 5) SeeAlso: AX=FFA5h/CX=CCCCh --------c-16FFA5CXCCCC----------------------- INT 16 - PC-Cache v6+ - FLUSH CACHE AND DISABLE DELAYED WRITES AX = FFA5h CX = CCCCh Return: AX = ??? (apparently either 0000h or sectors_in_cache - 5) Note: delayed writes are automatically disabled on EXECing (see INT 21/AH=4Bh) a program named either WIN.CO? or DV.E??; however, delayed writes are not automatically reenabled upon the program's termination in v6. SeeAlso: AX=FFA5h/CX=AAAAh,AX=FFA5h/CX=FFFFh --------c-16FFA5CXDDDD----------------------- INT 16 - PC-Cache v6+ - FLUSH AND DISABLE CACHE AX = FFA5h CX = DDDDh SeeAlso: AX=FFA5h/CX=EEEEh,AX=FFA5h/CX=FFFFh --------c-16FFA5CXEEEE----------------------- INT 16 - PC-Cache v6+ - ENABLE CACHE AX = FFA5h CX = EEEEh SeeAlso: AX=FFA5h/CX=DDDDh --------c-16FFA5CXFFFF----------------------- INT 16 - PC-Cache v6+ - FLUSH CACHE AX = FFA5h CX = FFFFh SeeAlso: AX=FFA5h/CX=CCCCh,AX=FFA5h/CX=DDDDh,INT 13/AH=A1h --------U-16FFA6----------------------------- INT 16 U - PC Tools v6.0-8.0 DESKTOP - GET ??? AX = FFA6h Return: DS:SI -> ??? Note: available only when popped up --------U-16FFA7----------------------------- INT 16 U - PC Tools v6.0-8.0 DESKTOP - GET ??? PATH AX = FFA7h Return: DS:SI -> ASCIZ path (directory from which PCTools was run???) --------U-16FFA8----------------------------- INT 16 U - PC Tools v6.0-8.0 DESKTOP - ??? AX = FFA8h DS:SI -> three consecutive ASCIZ strings for ??? (max 256 bytes total) ??? Return: ??? Notes: available only when popped up strings copied into internal buffer, among other actions --------U-16FFA9----------------------------- INT 16 U - PC Tools v6.0-8.0 DESKTOP - GET VERSION STRING AX = FFA9h Return: DS:SI -> version string --------U-16FFAA----------------------------- INT 16 U - PC Tools v6.0-8.0 DESKTOP - ??? AX = FFAAh ??? Return: ??? Note: available only when popped up --------U-16FFAB----------------------------- INT 16 U - PC Tools v6.0-8.0 DESKTOP - GET EDITOR SETTINGS??? AX = FFABh Return: DS:SI -> editor setting strings??? --------U-16FFAC----------------------------- INT 16 U - PC Tools v6.0-8.0 DESKTOP - SET ??? AX = FFACh DL = ??? Note: available only when popped up --------U-16FFAD----------------------------- INT 16 U - PC Tools v6.0-8.0 DESKTOP - SET ??? AX = FFADh DL = ??? --------U-16FFAE----------------------------- INT 16 U - PC Tools v6.0-8.0 DESKTOP - GET ??? AX = FFAEh Return: AL = ??? --------U-16FFAF----------------------------- INT 16 U - PC Tools v6.0-8.0 DESKTOP - SET ??? AX = FFAFh DL = ??? --------U-16FFB0----------------------------- INT 16 U - PC Tools v6.0-8.0 DESKTOP - SET ??? AX = FFB0h BL = ??? --------U-16FFB1----------------------------- INT 16 U - PC Tools v6.0-8.0 DESKTOP - ??? AX = FFB1h ??? Return: ??? --------U-16FFB2----------------------------- INT 16 U - PC Tools v5.5-8.0 DESKTOP - GET ??? AX = FFB2h Return: DS:SI -> ??? --------U-16FFB3----------------------------- INT 16 U - PC Tools v5.5-8.0 DESKTOP - ??? AX = FFB3h ??? Return: ??? Note: available only when popped up --------U-16FFB4----------------------------- INT 16 U - PC Tools v5.5-8.0 DESKTOP - SET ??? FLAG AX = FFB4h Note: available only when popped up SeeAlso: AX=FFBBh --------U-16FFB5----------------------------- INT 16 U - PC Tools v5.5-8.0 DESKTOP - GET/SET WINDOW PARAMETERS AX = FFB5h BX = window specifier (000Fh to 0019h) (see below) DX = 0000h get, nonzero = set ES:DI -> window parameter buffer (see below) SeeAlso: AX=FFCBh Values for window specifier: 000Fh comm/FAX 0014h hotkey selection 0015h ASCII table 0016h system colors menu Format of window parameters: Offset Size Description 00h BYTE rows in window, not counting frame 01h BYTE columns in window, not counting frame 02h BYTE row number of top of window 03h BYTE 2*column number of left of window 04h BYTE character attribute for ??? 05h BYTE character attribute for background/border 06h BYTE character attribute for ??? 07h DWORD pointer to ??? on screen 0Bh 4 BYTEs ??? 0Fh BYTE nonzero if window may be resized Note: if running in monochrome mode, character attributes at offsets 04h to 06h are stored unchanged, but attributes other than 07h, 0Fh, or 70h are changed to 07h on reading --------U-16FFB6----------------------------- INT 16 U - PC Tools v5.5-8.0 DESKTOP - GET ??? AX = FFB6h Return: AH = ??? AL = ??? --------U-16FFB7----------------------------- INT 16 U - PC Tools v5.5-8.0 DESKTOP - GET/SET ??? AX = FFB7h BX = direction 0000h copy to buffer else copy from buffer DS:SI -> 70-byte buffer with ??? Return: data copied Note: available only when popped up under v6.0+ --------U-16FFB8----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - GET/SET??? AX = FFB8h BH = subfunction 00h get Return: BL = old value of ??? CL = old value of ??? (v6.0+) CH = old value of ??? (v6.0+) nonzero set BL = new value for ??? CL = new value for ??? (v6.0+) CH = new value for ??? (v6.0+) DH = ??? Return: AL = old value replaced by CL (v6.0+) AH = old value replaced by CH (v6.0+) --------U-16FFB9----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFB9h ??? Return: AX = ??? CX = ??? DS:SI -> ??? ES:DI -> ??? --------U-16FFBA----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFBAh ??? Return: AX = ??? Note: available only when popped up --------U-16FFBB----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - CLEAR ??? FLAG AX = FFBBh Note: available only when popped up SeeAlso: AX=FFB4h --------U-16FFBC----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - RESTORE ORIGINAL SCREEN??? AX = FFBCh --------U-16FFBD----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? DATABASE INDEXING MESSAGES AX = FFBDh ??? Return: ??? --------U-16FFBE----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFBEh ??? Return: ??? Note: available only when popped up --------U-16FFBF----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFBFh BX = DOS file handle to write on ??? Return: ??? Note: available only when popped up --------U-16FFC0----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFC0h ??? Return: AX = 0000h if successful AX = FFFFh on error Note: available only when popped up --------U-16FFC1----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFC1h BL = ??? ES:DI -> data structure (see below) ??? Return: AX = ??? Note: available only when popped up SeeAlso: AX=FFC2h,AX=FFC3h Format of data structure: Offset Size Description 00h WORD ??? 02h WORD ??? 04h WORD ??? 06h WORD ??? 08h WORD ??? 0Ah BYTE ??? 0Bh BYTE ??? (zero/nonzero) ---v7.1--- 0Ch WORD ??? 0Eh BYTE ??? 0Fh WORD ??? 11h WORD ??? ??? --------U-16FFC2----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFC2h BL = ??? ES:DI -> data structure (see AX=FFC1h) ??? Return: AH = ??? CX = ??? DH = ??? DL = ??? Note: available only when popped up SeeAlso: AX=FFC1h,AX=FFC3h --------U-16FFC3----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFC3h BL = ??? ES:DI -> data structure (see AX=FFC1h) ??? Return: AH = ??? CX = ??? DH = ??? DL = ??? Note: available only when popped up SeeAlso: AX=FFC1h,AX=FFC2h --------U-16FFC4----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - GET ??? AX = FFC4h Return: AL = ??? BX = segment of scratch space??? CX = segment of stored screen data (section covered by window???) DX = segment of window parameters for ??? ES:BP -> ??? Note: available only when popped up in versions prior to 6.0 --------U-16FFC5----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - CHECK WHETHER DESKTOP LOADED RESIDENT AX = FFC5h Return: BL = nonzero if loaded resident = 00h if nonresident Note: available only when popped up; should call AX=FFEFh first to ensure that DESKTOP is active SeeAlso: AX=FFEFh,AX=FFF3h --------U-16FFC6----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - SET ??? AX = FFC6h BL = new value for ??? --------U-16FFC7----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - REMOVE WINDOW AX = FFC7h ??? Return: ??? --------U-16FFC8----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - GET ??? AX = FFC8h Return: DS:SI -> ??? Note: valid only while popped up --------U-16FFC9----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - COPY DATA TO CLIPBOARD AX = FFC9h DS:SI -> characters to store in clipboard CX = size in bytes Return: CF set on error Notes: available only when popped up while copying, bytes of 00h and 0Ah are skipped --------U-16FFCA----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - SET ??? AX = FFCAh DX = ??? Return: AX destroyed Note: available only when popped up --------U-16FFCB----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - SELECT WINDOW PARAMETERS??? AX = FFCBh DX = window specifier??? Return: AX destroyed Note: available only when popped up SeeAlso: AX=FFB5h --------U-16FFCC----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - DISPLAY ASCIZ STRING CENTERED IN WINDOW AX = FFCCh DS:SI -> ASCIZ string Return: AX = ??? CX = ??? ES:DI -> address past last character displayed (v5.1/5.5) -> ??? on menu bar (v6.0) --------U-16FFCD----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFCDh DS:DX -> ??? Return: ??? Note: available only when popped up --------U-16FFCE----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - SET ??? DELAYS AX = FFCEh CX = ??? Return: nothing??? --------U-16FFCF----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - CLOSE PRINTER/PRINT FILE AX = FFCFh Note: available only when popped up --------U-16FFD0----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - PREPARE TO PRINT??? AX = FFD0h ??? Return: ??? Note: available only when popped up --------U-16FFD1----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - DISPLAY PRINT OPTIONS MENU AX = FFD1h Return: BX = number of copies DX = destination 00h cancel 01h LPT1 02h LPT2 03h LPT3 04h COM1 05h COM2 06h disk file Note: available only when popped up --------U-16FFD2----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFD2h BX = ??? Return: BL = ??? Note: available only when popped up --------U-16FFD3----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFD3h DS:SI -> 92-byte data record for ??? Return: ??? SeeAlso: AX=FED3h --------U-16FFD4BH3C------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - CREATE/OPEN/DELETE FILE AX = FFD4h BH = 3Ch create file (with no attributes) 3Dh open file 41h delete file BL = access mode 00h read only 01h write only 02h read/write DS:SI -> ASCIZ filename Return: BX = file handle 0000h on error Note: operation is attempted in (in order) the directory from which the desktop was started/run???, the directory specified with the filename, X:\PCTOOLS\, and X:\ --------U-16FFD5----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFD5h ??? Return: ??? Note: available only when popped up --------U-16FFD6----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFD6h BX = ??? CX = ??? DX = offset in ??? ??? Return: ??? Note: available only when popped up --------U-16FFD7----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFD7h ??? Return: BL = ??? Note: available only when popped up --------U-16FFD8----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - SAFE CREATE FILE AX = FFD8h DS:BX -> ASCIZ filename Return: BX = file handle 0000h on error Note: pops up confirmation menu if file already exists only available when popped up??? --------U-16FFD9----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - GET ??? AX = FFD9h Return: AX = ??? Note: available only when popped up --------U-16FFDA----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - GET NAME OF LAST FILE OPENED AX = FFDAh DS:SI -> ??? (v5.1/5.5 only) Return: DS:SI -> filename --------U-16FFDB----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - SET ??? AX = FFDBh BL = ??? Note: available only when popped up --------U-16FFDC----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - UNHOOK AX = FFDCh Return: interrupt vectors 09h, 10h (v6.0+), 16h, 1Ch, and 21h restored to original values Index: uninstall;PC Tools DESKTOP --------U-16FFDDBX0000----------------------- INT 16 U - PC Tools v5.1+ PCShell API - INSTALLATION CHECK AX = FFDDh BX = 0000h Return: CX = 5555h DX = 5555h if PCShell installed in resident mode --------U-16FFDDBX0001----------------------- INT 16 U - PC Tools v5.1+ PCShell API - REQUEST POP-UP AX = FFDDh BX = 0001h Return: CF clear if request successful (PCShell will pop up) CF set on error SeeAlso: AX=FFDDh/BX=0003h --------U-16FFDDBX0002----------------------- INT 16 U - PC Tools v5.1-5.5 PCShell API - GET ??? AX = FFDDh BX = 0002h Return: AL = 00h ??? 01h ??? Note: PCShell v6.0+ displays the error message "Incorrect PCRUN version", awaits a keystroke, and aborts the current process --------U-16FFDDBX0003----------------------- INT 16 U - PC Tools v5.1+ PCShell API - REQUEST POP-UP AX = FFDDh BX = 0003h SeeAlso: AX=FFDDh/BX=0001h --------U-16FFDDBX0004----------------------- INT 16 U - PC Tools v5.1+ PCShell API - GET ??? AX = FFDDh BX = 0004h Return: CF clear if successful DS:SI -> ??? --------U-16FFDDBX0005----------------------- INT 16 U - PC Tools v5.1+ PCShell API - ??? AX = FFDDh BX = 0005h ??? Return: ??? Note: resets various variables if certain conditions are met --------U-16FFDDBX0006----------------------- INT 16 U - PC Tools v5.1+ PCShell API - ??? AX = FFDDh BX = 0006h ??? Return: ??? Note: resets various variables if certain conditions are met --------U-16FFDDBX0007----------------------- INT 16 U - PC Tools v5.1+ PCShell API - SET ??? FLAG AX = FFDDh BX = 0007h Return: CF clear if successful SeeAlso: AX=FFDDh/BX=0008h --------U-16FFDDBX0008----------------------- INT 16 U - PC Tools v5.1+ PCShell API - CLEAR ??? FLAG AX = FFDDh BX = 0008h Return: CF undefined SeeAlso: AX=FFDDh/BX=0007h --------U-16FFDDBX0009----------------------- INT 16 U - PC Tools v6.0+ PCShell API - GET PCRUN PARAMETERS AX = FFDDh BX = 0009h Return: CF clear if successful DS:SI -> list of pointers (see below) Format of returned pointer list: Offset Size Description 00h WORD offset of WORD containing ??? 02h WORD offset of name of program to execute 04h WORD offset of 80-byte buffer for ??? 06h WORD offset of buffer for ??? (length in WORD preceding buffer) 08h WORD offset of buffer for ??? (length in WORD preceding buffer) --------U-16FFDDBX000A----------------------- INT 16 U - PC Tools v6.0+ PCRUN API - INSTALLATION CHECK AX = FFDDh BX = 000Ah Return: CX = 5555h if running DX = 5555h Note: also sets a flag --------U-16FFDDBX000B----------------------- INT 16 U - PC Tools v6.0+ PCRUN API - ??? AX = FFDDh BX = 000Bh ??? Return: CX = 5555h if PCRUN active DX = 5555h Note: also clears flag set by AX=FFDDh/BX=000Ah --------U-16FFDE----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - DISPLAY POPUP MENU AX = FFDEh DS:DX -> menu description (must be on a paragraph boundary) Return: AX = ??? AL seems to be the number of the selected button Note: available only when popped up SeeAlso: AX=FFEEh --------U-16FFDF----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFDFh ??? Return: ??? --------U-16FFE0----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFE0h CX = ??? DX = ??? Note: available only when popped up --------U-16FFE1----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - BEEP AX = FFE1h --------U-16FFE2----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFE2h DX = ??? Return: ??? Note: available only when popped up --------U-16FFE3----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - PRINT CHARACTER AX = FFE3h BL = character to print to currently open printer or print file Return: CF set on error Note: available only when popped up SeeAlso: INT 17/AH=00h --------U-16FFE4----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFE4h DX = segment of ??? Return: ??? Note: available only when popped up --------U-16FFE5----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - POP UP FILE SELECTION MENU AX = FFE5h DS:SI -> ASCIZ wildcard filespec followed by ASCIZ menu title DX = segment of window parameters??? Return: AX = DOS file handle for file DS:DX -> filename??? = FFFFh if cancelled by user Note: available only when popped up SeeAlso: AX=FFDAh --------U-16FFE6----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - CHECK FOR AND GET KEYSTROKE AX = FFE6h Return: AX = 0000h if no key available else BIOS keycode Notes: available only when popped up invokes INT 28 idle interrupt before checking for key --------U-16FFE7----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFE7h BX = segment of ??? Return: ??? Note: available only when popped up --------U-16FFE8----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - DISPLAY NUMBER AX = FFE8h CX = number DH = attribute DS:SI -> destination for ASCII number Return: DS:SI buffer filled in with alternating characters and attributes --------U-16FFE9----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - GET FILE LIST??? AX = FFE9h Return: BX = segment of file/directory list (14 bytes per file, NUL-padded) Note: available only when popped up --------U-16FFEA----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - DISPLAY COUNTED STRING AX = FFEAh DS:SI -> counted string (count byte followed by string) Return: ??? Note: available only when popped up --------U-16FFEB----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFEBh ??? Return: ??? --------U-16FFEC----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - GET KEY AX = FFECh DS:SI -> FAR routine to ??? BX = ??? ??? Return: AX = keystroke FFFFh if F10 pressed to go to menu Notes: available only when popped up invokes INT 28 while waiting for keystroke F10 is hotkey to Desktop menu Index: hotkeys;PC Tools DESKTOP --------U-16FFED----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - GET ??? AX = FFEDh Return: AX = ??? Note: available only when popped up --------U-16FFEE----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - DEFINE PULLDOWN MENUS AX = FFEEh DS:SI -> pulldown menu system description (see below) Return: AX destroyed Notes: available only when popped up if the accessory does not need any menu items of its own, it should call AX=FFFAh instead SeeAlso: AX=FFF7h,AX=FFFAh Format of pulldown menu system description: Offset Size Description 00h WORD offset of menu bar contents (counted string) 02h WORD number of items on menu bar 04h 10 BYTEs scan codes for hotkeying to each of up to ten menu items 0Eh 10 BYTEs which character to highlight in each menu item (01h=first) 18h WORD offset of first menu definition (see below) 1Ah WORD offset of second menu definition ... Format of menu definition: Offset Size Description 00h WORD offset of menu contents (see below) 02h WORD number of entries in menu 04h for each entry: Offset Size Description 00h BYTE scancode of Alt-key to invoke entry 01h BYTE character to highlight (01h=first, etc) 02h WORD offset of FAR routine to handle selection Format of menu contents: Offset Size Description 00h BYTE number of lines in menu 01h BYTE width of menu 02h N BYTEs counted strings, one for each line in menu --------U-16FFEFCX0000----------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - INSTALLATION CHECK AX = FFEFh CX = 0000h Return: CX = ABCDh if PC Tools DESKTOP.EXE installed BX = segment of resident portion AX = ??? (v5.1/5.5 only) SeeAlso: AX=FEEFh,AX=FFC5h,AX=FFF3h --------U-16FFF0----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - SET ??? AX = FFF0h DX = ??? Return: AX destroyed Note: available only when popped up --------U-16FFF1BX0000----------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ALTERNATE INSTALLATION CHECK AX = FFF1h BX = 0000h leave ??? flag as is nonzero set ??? flag Return: CX = 5555h if installed DX = 5555h --------U-16FFF2----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - DISPLAY HELP LINE AX = FFF2h DS:SI -> ASCIZ function key label string (each label preceded by '[') or help text Return: AX destroyed Notes: available only when popped up if the specified string does not start with '[', it is displayed centered on the bottom line, else the function key labels are shown --------U-16FFF3----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - PREPARE TO UNLOAD RESIDENT DESKTOP AX = FFF3h Note: releases any EMS being used; restores video mode, page, and cursor shape; and restores interrupt vectors SeeAlso: AX=FFC5h,AX=FFEFh Index: uninstall;PC Tools DESKTOP --------U-16FFF4----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - ??? AX = FFF4h ??? Return: ??? Note: available only when popped up SeeAlso: AX=FFF6h --------U-16FFF5----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - GET SCREEN ATTRIBUTE ARRAY AX = FFF5h Return: ES:BX -> screen attributes data structure (see below) AL = ??? (v6.0+) Format of attribute data structure: Offset Size Description -1 BYTE attribute for desktop background 00h BYTE attribute for normal characters on desktop menu 01h BYTE attribute for highlighted characters on desktop menu 02h 5 BYTEs ??? 07h BYTE attribute for dialog boxes 08h 15 BYTEs ??? 17h BYTE attribute for message boxes --------U-16FFF6----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - INVOKE NOTEPAD EDITOR AX = FFF6h DS = segment of editor buffer structure (see below) BX = ??? DX = segment of window parameters structure (see AX=FFB5h) Return: ??? Note: available only when popped up SeeAlso: AX=FFF4h Format of editor buffer structure: Offset Size Description 00h WORD offset of current cursor position in buffer segment 02h 2 BYTEs ??? 04h WORD offset of beginning of file data in buffer segment 06h 10 BYTEs ??? 10h N BYTEs ASCIZ name of file being edited --------U-16FFF7----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - PROCESS MENU BAR ENTRY??? AX = FFF7h DS:SI -> ??? ??? Return: ??? Notes: available only when popped up performs input processing on the menu bar set up with AX=FFEEh SeeAlso: AX=FFEEh,AX=FFFBh --------U-16FFF8----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - DRAW EMPTY WINDOW AX = FFF8h DS:0000h -> window parameters structure (see AX=FFB5h) DS:BX -> DWORD to store address of ??? on screen Return: ??? --------U-16FFF9----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - DEFINE SCREEN REFRESH ROUTINE AX = FFF9h ES:BX -> FAR routine to redisplay the utility's window Note: available only when popped up --------U-16FFFA----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - DEFINE STANDARD PULLDOWN MENUS AX = FFFAh Notes: available only when popped up adds the "Window" option to the "Desktop" option which is the only one available when no accessories are active. Unlike AX=FFEEh, no additional menu items are added between "Desktop" and "Window" SeeAlso: AX=FFEEh,AX=FFFBh --------U-16FFFB----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - PROCESS STANDARD MENU BAR AX = FFFBh Return: ??? Notes: available only when popped up performs input processing on the standard menu bar set up with AX=FFFAh SeeAlso: AX=FFF7h --------U-16FFFC----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - GET HOTKEYS AND KEYBOARD VECTOR AX = FFFCh Return: ES:BX -> hotkey table (see below) DS:DX = original INT 09 vector Format of hotkey table: Offset Size Description 00h 2 BYTEs scancode/shift state for desktop hotkey 02h 2 BYTEs scancode/shift state for clipboard paste key 04h 2 BYTEs scancode/shift state for clipboard copy key 06h 2 BYTEs scancode/shift state for screen autodial key --------U-16FFFD----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - COPY ??? AX = FFFDh Return: AX destroyed Note: copies 4000 bytes from ??? to ??? under certain circumstances SeeAlso: AX=FF91h,AX=FF92h --------M-16FFFE----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - SHOW MOUSE CURSOR AX = FFFEh SeeAlso: AX=FFFFh,INT 33/AX=0001h --------M-16FFFF----------------------------- INT 16 U - PC Tools v5.1-8.0 DESKTOP - HIDE MOUSE CURSOR AX = FFFFh SeeAlso: AX=FFFEh,INT 33/AX=0002h --------P-17----DX0ABC----------------------- INT 17 - PRINTER - LPTx v5.x INSTALLATION CHECK DX = 0ABCh Return: AX = AAAAh DX = BAAAh ES = code segment of resident portion --------P-17----DX0B90----------------------- INT 17 - PRINTER - LPTx v6.x INSTALLATION CHECK DX = 0B90h Return: DX = ABBBh ES = code segment of resident portion --------P-17----DX0B91----------------------- INT 17 - PRINTER - LPTx v7.x INSTALLATION CHECK DX = 0B91h Return: DX = ABCBh ES = code segment of resident portion --------P-17----DX0F5F----------------------- INT 17 - PRINTER - LPTx v4.x INSTALLATION CHECK DX = 0F5Fh Return: AX = AAAAh DX = F555h ES = code segment of resident portion --------B-1700------------------------------- INT 17 - PRINTER - WRITE CHARACTER AH = 00h AL = character to write DX = printer number (00h-02h) Return: AH = printer status (see below) SeeAlso: AH=02h,AH=84h"AX",AH=F1h,INT 16/AX=FFE3h,INT 1A/AH=11h"NEC" Bitfields for printer status: Bit(s) Description 7 not busy 6 acknowledge 5 out of paper 4 selected 3 I/O error 2-1 unused 0 timeout --------B-1701------------------------------- INT 17 - PRINTER - INITIALIZE PORT AH = 01h DX = printer number (00h-02h) Return: AH = printer status (see AH=00h) Note: some printers report that they are ready immediately after initialization when they actually are not; a more reliable result may be obtained by calling AH=02h after a brief delay SeeAlso: AH=02h,AH=FFh"PC-MOS",INT 1A/AH=10h"NEC" --------B-1702------------------------------- INT 17 - PRINTER - GET STATUS AH = 02h DX = printer number (00h-02h) Return: AH = printer status (see AH=00h) Note: PRINTFIX from MS-DOS 5.0 hooks this function and always returns AH=90h SeeAlso: AH=01h,AH=F2h,INT 1A/AH=12h"NEC" --------P-1702--DX0000----------------------- INT 17 - INSET - INSTALLATION CHECK AH = 02h DX = 0000h CX = 07C3h (1987d) Return: CX = 07C2h (1986d) if installed Program: INSET is a text/graphics integration program --------b-170200BX5050----------------------- INT 17 - Advanced Parallel Port BIOS - INSTALLATION CHECK AX = 0200h BX = 5050h ('PP') CH = 45h ('E') DX = printer port number (00h-02h) Return: AH = 00h \ AL = 45h If Advanced BIOS Installed CX = 5050h / DX:BX -> far entry point to Advanced BIOS Program: The Advanced Parallel Port BIOS provides support for parallel port peripherals using the enhanced modes of the IEEE 1284. --------P-1703------------------------------- INT 17 U - Emulaser ELTSR - INSTALL INTERRUPT HANDLERS AH = 03h Return: BX = ??? CX = ??? Program: ELTSR is the resident portion of the Emulaser PostScript emulator by Vertisoft Systems, Inc. SeeAlso: AH=04h"Emulaser",AH=0Eh,INT 1A/AH=E5h --------c-1703------------------------------- INT 17 - PC-MOS/386 v5.01 - PRINT SPOOLER - PRINT STRING AH = 03h DX = printer port number CX = number of characters to print DS:SI -> string Return: AH = printer status (see AH=00h) CX = number of characters actually printed Desc: send an entire string of chars to the print spooler with a single call Program: PC-MOS/386 v5.01 is a multitasking, multiuser MS-DOS 5.0-compatible operating system by The Software Link, Inc. SeeAlso: AH=00h,AH=01h,AH=02h,AH=FFh"PC-MOS" --------P-1704------------------------------- INT 17 U - Emulaser ELTSR - BEGIN CAPTURING OUTPUT AH = 04h Note: has no effect unless ELTSR is deactivated (see AX=0503h) SeeAlso: AH=03h"Emulaser",AX=0503h,INT 1A/AH=E5h --------P-170500----------------------------- INT 17 U - Emulaser ELTSR - ??? AX = 0500h ??? Return: AX = unload status (0001h safe to unload, 0002h not safe) BX = ??? CX = PSP segment of ELTSR DX = activity flag (0000h disabled, 0001h capturing, 0002h ???printing) SI = ??? DI = ??? SeeAlso: AH=04h,INT 1A/AH=E5h --------P-170501----------------------------- INT 17 U - Emulaser ELTSR - UNHOOK INTERRUPTS AX = 0501h Return: (see AX=0500h) Note: restores interrupt vectors without checking whether they have been hooked by later programs; should only be called if ELTSR reports that it is safe to unload SeeAlso: AH=04h,AX=0500h,AX=0503h,INT 1A/AH=E5h Index: uninstall;Emulaser ELTSR --------P-170502----------------------------- INT 17 U - Emulaser ELTSR - SET ??? AX = 0502h BL = Emulaser port (31h = LPT1, 32h = LPT2, 33h = LPT3) CL = ??? DL = ??? Return: (see AX=0500h) SeeAlso: AH=04h,AX=0500h,INT 1A/AH=E5h --------P-170503----------------------------- INT 17 U - Emulaser ELTSR - DEACTIVATE??? AX = 0503h Return: (see AX=0500h) SeeAlso: AH=04h,AX=0500h,AX=0501h,INT 1A/AH=E5h --------P-1706------------------------------- INT 17 U - Emulaser ELTSR - ??? AH = 06h ??? Return: ??? SeeAlso: AH=05h,INT 1A/AH=E5h --------P-1707------------------------------- INT 17 U - Emulaser ELTSR - OPEN CAPTURE FILE AH = 07h ES:DX -> ASCIZ filename to be opened Return: ??? Note: new output will be appended to the specified file SeeAlso: AH=08h,INT 1A/AH=E5h --------P-1708------------------------------- INT 17 U - Emulaser ELTSR - CLOSE CAPTURE FILE AH = 08h ??? Return: ??? Desc: close the file previously opened by function 07h SeeAlso: AH=07h,INT 1A/AH=E5h --------P-1709------------------------------- INT 17 U - Emulaser ELTSR - PRINT CAPTURE FILE??? AH = 09h BX = ??? CX = ??? DX = printer port (01h COM1, 02h COM2, 05h LPT1, 06h LPT2) Return: AX = status 00h successful FFh failed Program: ELTSR is the resident portion of the Emulaser PostScript emulator by Vertisoft Systems, Inc. Note: this function calls through to INT 1A/AX=E401h, and thus requires that either ELSPL or Disk Spool II be installed SeeAlso: AH=0Ah,INT 1A/AX=E401h,INT 1A/AH=E5h --------P-170A------------------------------- INT 17 U - Emulaser ELTSR - SET ??? FILENAME AH = 0Ah ES:BX -> ??? buffer CX = length of ??? buffer Return: ??? Note: copies the specified name into the buffer passed to ELSPL as the filename by AH=09h SeeAlso: AH=09h,INT 1A/AH=E5h --------P-170B------------------------------- INT 17 U - Emulaser ELTSR - GET ??? AH = 0Bh Return: AX:BX -> ??? SeeAlso: AH=0Ah,INT 1A/AH=E5h --------P-170C------------------------------- INT 17 U - Emulaser ELTSR - SET ??? FLAG AH = 0Ch ??? Return: ??? SeeAlso: AH=0Bh,INT 1A/AH=E5h --------P-170D------------------------------- INT 17 U - Emulaser ELTSR - GET TRUE ScrlLk STATE AH = 0Dh Return: AX = state (0000h off, 0010h on) Desc: determine the actual state of ScrlLk even when Emulaser is controlling the ScrlLk light as its activity indicator SeeAlso: AH=0Ch,INT 16/AH=02h,INT 1A/AH=E5h --------P-170E------------------------------- INT 17 U - Emulaser ELTSR - BACKGROUND PROCESSING AH = 0Eh Program: ELTSR is the resident portion of the Emulaser PostScript emulator by Vertisoft Systems, Inc. Note: this function is called by ELTSR on every INT 08 to allow data to be processed in the background, but may also be called by applications to give Emulaser additional CPU time SeeAlso: AH=0Dh,INT 1A/AH=E5h --------P-172000----------------------------- INT 17 - PC Paint Plus 2.0 - PRINTER DRIVER - INSTALLATION CHECK AX = 2000h BL = printer number??? Return: AX = status (see below) BX = driver version number (BH=major,BL=minor) CH = ??? (00h) CL = ??? DX = ??? (0100h) Note: also enables the remaining printer driver functions (2001h-2007h) SeeAlso: AX=2001h,AX=2002h,AX=2003h,AX=2004h,AX=2005h,AX=2006h,AX=2007h Values for status: 0000h successful 0001h invalid printer??? 0002h ??? 0003h invalid subfunction 0005h driver disabled, must call function 00h first 0009h unknown printer error 000Bh printer not selected 000Ch printer out of paper 000Eh error while writing to serial printer 000Fh ??? 0010h invalid function number 0011h value out of range --------P-172001----------------------------- INT 17 - PC Paint Plus 2.0 - PRINTER DRIVER - SET ??? FLAG AX = 2001h BL = printer number??? Return: AX = status (see AX=2000h) --------P-172002----------------------------- INT 17 - PC Paint Plus 2.0 - PRINTER DRIVER - GET INFORMATION AX = 2002h BL = printer number??? CL = desired information 00h printer type Return: ES:DI -> ASCIZ printer name 01h paper size DX = size index Return: ES:DI -> ASCIZ paper size description 02h ??? Return: BX = ??? 03h printer information??? DX = ??? ES:BX -> buffer for ??? (min 134 bytes) Return: AX = status (see AX=2000h) SeeAlso: AX=2000h,AX=2004h --------P-172003----------------------------- INT 17 - PC Paint Plus 2.0 - PRINTER DRIVER - ??? AX = 2003h ES:BX -> ??? Return: AX = status (see AX=2000h) SeeAlso: AX=2000h,AX=2004h --------P-172004----------------------------- INT 17 - PC Paint Plus 2.0 - PRINTER DRIVER - GET ??? AX = 2004h BL = printer number??? Return: AX = status (see AX=2000h) ES:DI -> ??? SeeAlso: AX=2000h,AX=2003h --------P-172005----------------------------- INT 17 - PC Paint Plus 2.0 - PRINTER DRIVER - ADVANCE PRINTER TO NEXT PAGE AX = 2005h BL = printer number??? Return: AX = status (see AX=2000h) Note: this function also clears the flag set by AX=2001h SeeAlso: AX=2000h,AX=2001h,AX=2006h --------P-172006----------------------------- INT 17 - PC Paint Plus 2.0 - PRINTER DRIVER - ADVANCE TO NEXT PAGE & SHUT DOWN AX = 2006h BL = printer number??? Return: AX = status (see AX=2000h) Note: this function also clears the flag set by AX=2001h and disables functions other than AX=2000h SeeAlso: AX=2000h,AX=2001h,AX=2005h --------P-172007----------------------------- INT 17 - PC Paint Plus 2.0 - PRINTER DRIVER - UNIMPLEMENTED AX = 2007h Return: AX unchanged SeeAlso: AX=2000h --------N-172400----------------------------- INT 17 - Shamrock Software NET.24 v3.11+ - ENABLE/DISABLE API FUNCTIONS AX = 2400h DL = new state 00h disabled 01h enabled Return: DL = 24h if installed DH = minor version number CX = network address of this machine AL = status 00h successful 01h timeout 02h header error 03h data error 04h busy 05h invalid parameters SeeAlso: AX=2403h,INT 16/AX=4500h --------N-172401----------------------------- INT 17 - Shamrock Software NET.24 v3.11+ - RECEIVE BLOCK, NO HANDSHAKE AX = 2401h BL = timeout in clock ticks Return: AL = status (see AX=2400h) DX:BX -> receive buffer SeeAlso: AX=2402h,AX=2404h,AX=2408h --------N-172402----------------------------- INT 17 - Shamrock Software NET.24 v3.11+ - TRANSMIT BLOCK, NO HANDSHAKE AX = 2402h transmit buffer filled (see AX=2403h) Return: AL = status (see AX=2400h) SeeAlso: AX=2401h,AX=2403h,AX=2404h,AX=2409h --------N-172403----------------------------- INT 17 - Shamrock Software NET.24 v3.11+ - GET STATUS AND TRANSMISSION BUFFER AX = 2403h Return: AL = status (see AX=2400h) CX = number of characters in receive ring buffer DX:BX -> transmit buffer SeeAlso: AX=2400h,AX=2402h --------N-172404----------------------------- INT 17 - Shamrock Software NET.24 v3.11+ - SEND ACK BLOCK AX = 2404h BX = target address Return: AL = status (see AX=2400h) SeeAlso: AX=2402h,AX=2405h --------N-172405----------------------------- INT 17 - Shamrock Software NET.24 v3.11+ - SEND NAK BLOCK AX = 2405h BX = target address Return: AL = status (see AX=2400h) SeeAlso: AX=2402h,AX=2404h --------N-172406----------------------------- INT 17 - Shamrock Software NET.24 v3.11+ - PREPARE CHARACTER-ORIENTED RECEIVE AX = 2406h Return: AL = status (see AX=2400h) SeeAlso: AX=2407h,AX=240Ah --------N-172407----------------------------- INT 17 - Shamrock Software NET.24 v3.11+ - RECEIVE CHARACTER FROM REMOTE AX = 2407h Return: AL = status (see also AX=2400h) 06h end of data DL = received character SeeAlso: AX=2406h --------N-172408----------------------------- INT 17 - Shamrock Software NET.24 v3.11+ - RECEIVE BLOCK, WITH HANDSHAKE AX = 2408h Return: AL = status (see also AX=2400h) 06h end of data CX = number of bytes in receive buffer DX:SI -> receive buffer SeeAlso: AX=2401h,AX=2405h,AX=2409h --------N-172409----------------------------- INT 17 - Shamrock Software NET.24 v3.11+ - TRANSMIT COMMAND, WITH HANDSHAKE AX = 2409h BX = target address CX = number of data bytes DL = command code to send DS:SI -> data bytes for command Return: AL = status (see also AX=2400h) 03h no response 06h remote currently unable to perform command SeeAlso: AX=2405h,AX=2408h --------N-17240A----------------------------- INT 17 - Shamrock Software NET.24 v3.11+ - PREPARE CHARACTER-ORIENTED TRANSMIT AX = 240Ah Return: AL = status (see AX=2400h) SeeAlso: AX=2406h,AX=240Bh,AX=240Ch --------N-17240B----------------------------- INT 17 - Shamrock Software NET.24 v3.11+ - TRANSMIT SINGLE CHARACTER TO REMOTE AX = 240Bh DL = character to send Return: AL = status (see also AX=2400h) 03h transmission error 06h write error SeeAlso: AX=2407h,AX=240Ah,AX=240Ch --------N-17240C----------------------------- INT 17 - Shamrock Software NET.24 v3.11+ - END CHARACTER-ORIENTED TRANSMIT AX = 240Ch Return: AL = status (see also AX=2400h) 03h transmission error 06h remote breaks connection SeeAlso: AX=240Ah,AX=240Bh --------J-175000----------------------------- INT 17 - AX (Japanese AT) PRINTER - SET PRINTER COUNTRY CODE AX = 5000h BX = country code 0001h USA (English), 0051h Japan Return: AL = status 00h successful 01h bad country code 02h other error SeeAlso: AX=5001h,AH=51h,INT 10/AX=5000h,INT 16/AX=5000h --------J-175001----------------------------- INT 17 - AX (Japanese AT) PRINTER - GET PRINTER COUNTRY CODE AX = 5001h Return: AL = status 00h successful BX = country code 02h error SeeAlso: AX=5000h,AH=51h,INT 10/AX=5001h,INT 16/AX=5001h --------J-1751------------------------------- INT 17 - AX (Japanese AT) PRINTER - JIS to Shift-JIS CONVERSION AH = 51h DX = 2-byte JIS code Return: DX = shift-JIS value or 0000h on error Note: one of AH=51h and AH=52h converts from JIS (Japanese Industry Standard) characters to Shift-JIS characters, and the other performs the opposite conversion SeeAlso: AX=5000h,AH=52h --------J-1752------------------------------- INT 17 - AX (Japanese AT) PRINTER - Shift-JIS to JIS CONVERSION AH = 52h DX = 2-byte shift-JIS code Return: DX = JIS code or 0000h on error Note: one of AH=51h and AH=52h converts from JIS (Japanese Industry Standard) characters to Shift-JIS characters, and the other performs the opposite conversion SeeAlso: AH=51h --------V-1760------------------------------- INT 17 - FLASHUP.COM - INSTALLATION CHECK AH = 60h Return: AL = 60h DX = CS of resident code Notes: FLASHUP.COM is part of Flash-Up Windows by The Software Bottling Co. FLASHUP also hooks INT 10 and receives commands via INT 10/AH=09h,0Ah consisting of an 80h followed by the actual command SeeAlso: INT 10/AH=09h,INT 10/AH=0Ah --------V-1761------------------------------- INT 17 - SPEEDSCR.COM - INSTALLATION CHECK AH = 61h Return: AL = 61h DX = CS of resident code Note: SPEEDSCR.COM is by The Software Bottling Co. --------P-1762------------------------------- INT 17 U - T2PS v1.0 - UNINSTALL AH = 62h Return: nothing SeeAlso: AH=63h,AH=64h,INT 05/AX=554Eh --------P-1763------------------------------- INT 17 U - T2PS v1.0 - SET PARAMETERS AH = 63h ES:SI -> settings (see below) Program: T2PS is a shareware ASCII-to-PostScript converter by A.N.D. Technologies SeeAlso: AH=62h,AH=64h,INT 05/AX=4E57h Format of settings: Offset Size Description 00h WORD LPT port number (0=LPT1, etc.) 02h WORD page heigh in points 04h WORD page width in points 06h WORD top margin in points 08h WORD bottom margin in points 0Ah WORD left margin in points 0Ch WORD right margin in points 0Eh WORD font size in points 10h WORD tab size 12h WORD timeout in clock ticks --------P-1764------------------------------- INT 17 U - T2PS v1.0 - GET PARAMETERS AH = 64h ES:SI -> buffer for settings (see AH=63h) Return: ES:SI buffer filled SeeAlso: AH=62h,AH=63h,INT 05/AX=5053h --------N-1781------------------------------- INT 17 - Alloy NTNX, MW386 - CANCEL JOBS FOR CURRENT USER AH = 81h AL = 00h (NTNX compatibility mode) CL = number of jobs to cancel Return: AL = status 00h success 01h..7Fh warning 80h general failure 81h host overloaded (NTNX only) 82h module busy (NTNX only) 83h host busy (NTNX only) 84h re-entry flag set 85h invalid request 86h invalid printer 87h invalid process ID 89h access denied 8Ah option not available for given port type 8Bh option not available for given task type 91h printer busy C2h file not found C3h path not found C4h file access failure Note: cancels the last CL printouts for the current task SeeAlso: AH=82h --------N-1782------------------------------- INT 17 - Alloy NTNX, MW386 - CANCEL ALL JOBS FOR CURRENT USER AH = 82h AL = 00h (NTNX compatibility mode) Return: AL = status (see AH=81h) SeeAlso: AH=81h --------N-1783------------------------------- INT 17 - Alloy NTNX, MW386 - SET NUMBER OF COPIES AH = 83h AL = mode 00h NTNX compatibility CL = number of copies (max 99, default 1) 02h MW386 v2+ BX = logical device number 00h-03h = LPT1-LPT4 04h-07h = COM1-COM4 CX = number of copies Return: AL = status (see AH=81h) Note: in NTNX compatibility mode, this function only affects LPT1 --------N-1784------------------------------- INT 17 - Alloy NTNX, MW386 - GENERATE PRINT BREAK AH = 84h AL = mode 00h NTNX compatibility 02h MW386 v2+ BX = logical device number 00h-03h = LPT1-LPT4 04h-07h = COM1-COM4 Note: closes spool file and tells spooler to queue the print job (LPT1 only under MW386 in NTNX compatibility mode) --------J-1784------------------------------- INT 17 - AX (Japanese AT) PRINTER - OUTPUT CHARACTER WITHOUT CONVERSION AH = 84h AL = character DX = printer number Return: AH = printer status (see AH=00h) SeeAlso: AH=00h,AH=85h --------J-1785------------------------------- INT 17 - AX (Japanese AT) PRINTER - ENABLE/DISABLE CHARACTER CONVERSION AH = 85h AL = new state (00h enabled, 01h disabled) SeeAlso: AH=84h"AX" --------N-1787------------------------------- INT 17 - Alloy NTNX - SET INDOS POINTER AH = 87h AL = 00h CX:BX -> buffer for user-written printer drivers Return: BX,CX destroyed Note: must be executed before the printer is enabled SeeAlso: AH=8Ah --------N-1788------------------------------- INT 17 - Alloy NTNX, MW386 - REMOVE PRINTER FROM SPOOLER AH = 88h AL = mode 00h NTNX compatibility DX = NTNX printer number (see below) 01h MW386 DX = MW386 printer number Return: AH = status (see AH=81h) Note: removes specified printer from the spooler's list of printers SeeAlso: AH=89h,AH=8Bh Values for NTNX printer number: 00h host LPT1 01h host LPT2 02h host LPT3 03h host LPT4 04h host COM1 05h host COM2 06h user's logical COM2 07h user's terminal AUX port 08h user's logical COM1 (MW386 only) --------N-1789------------------------------- INT 17 - Alloy NTNX, MW386 - ADD PRINTER TO SPOOLER AH = 89h AL = mode 00h NTNX compatibility DX = NTNX printer number (see AH=88h) 01h MW386 DX = MW386 printer number Return: AL = status (see AH=81h) Note: the specified printer is added to the spooler's list of available printers SeeAlso: AH=88h,AH=8Bh --------N-178A------------------------------- INT 17 - Alloy NTNX - ACTIVATE USER-WRITTEN PRINTER DRIVER AH = 8Ah ??? SeeAlso: AH=92h --------N-178B------------------------------- INT 17 - Alloy MW386 - GET PHYSICAL DEVICE NUMBER FROM NAME AH = 8Bh DS:DX -> ASCIZ printer name Return: AL = status (see also AH=81h) 00h successful DX = physical device number SeeAlso: AH=89h,AH=8Ch,INT 14/AH=20h"Alloy" --------N-178C------------------------------- INT 17 - Alloy MW386 - GET DEVICE NAME FROM PHYSICAL DEVICE NUMBER AH = 8Ch DX = physical device number ES:DI -> 17-byte buffer for ASCIZ device name Return: AL = status (see also AH=81h) 00h successful ES:DI buffer filled SeeAlso: AH=88h,AH=8Bh --------N-178D------------------------------- INT 17 - Alloy NTNX,MW386 - RESET SPOOLER AH = 8Dh AL = 00h Return: AL = status (see AH=81h) Notes: clears all buffers and resets spooler to boot-up values MW386 supports this function for compatibility only; it is a NOP --------N-178E------------------------------- INT 17 - Alloy NTNX - GET INT 28 ENTRY POINT AH = 8Eh AL = 00h Return: CX:BX -> INT 28 entry point SeeAlso: AH=8Fh --------N-178F------------------------------- INT 17 - Alloy NTNX - GET DOS INTERCEPT ENTRY POINT AH = 8Fh AL = 00h Return: CX:BX -> DOS intercept routine SeeAlso: AH=8Eh --------N-1790------------------------------- INT 17 - Alloy NTNX, MW386 - SPOOL FILE BY NAME AH = 90h AL = mode 00h NTNX compatibility DL = printer code (FFh=current) (NTNX, MW386 v1.x only) DH = number of copies (FFh=current) (NTNX, MW386 v1.x only) 02h MW386 v2+ BX = logical device number 00h-03h = LPT1-LPT4 04h-07h = COM1-COM4 CX:SI -> ASCIZ pathname Return: AL = status (see AH=81h) Note: in mode 00h, the file is always sent to logical LPT1 SeeAlso: AH=A0h --------N-1791------------------------------- INT 17 - Alloy NTNX, MW386 - GET USER NUMBER AND CURRENT PRINTER AH = 91h AL = mode 00h NTNX compatibility Return: CX = user number (00h = host) DX = currently selected printer number (00h-08h) 01h MW386 Return: CX = user number DX = physical dev number of currently selected printer 02h MW386 v2+ BX = logical device number 00h-03h = LPT1-LPT4 04h-07h = COM1-COM4 Return: CX = user number DX = physical device number Return: AL = status (see AH=81h) SeeAlso: AH=8Ch --------N-1792------------------------------- INT 17 - Alloy NTNX - CHECK PRINTER DRIVER AH = 92h AL = 00h CL = 00h Return: CL = driver state 01h initialized 80h not initialized AX = status (see AH=81h) SeeAlso: AH=8Ah --------N-1794------------------------------- INT 17 - Alloy NTNX, MW386 - SELECT PRINTER AH = 94h AL = mode 00h NTNX compatibility DX = NTNX printer number (see AH=88h) 01h MW386 DX = MW386 printer number 02h MW386 v2+ BX = logical printer number DX = MW386 printer number Return: AL = status (see AH=81h) Note: modes 00h and 01h affect only logical LPT1 SeeAlso: AH=8Bh,AH=95h --------N-1795------------------------------- INT 17 - Alloy NTNX, MW386 - GET CURRENT PRINTER AH = 95h AL = mode 00h NTNX compatibility Return: DX = NTNX printer number (see AH=88h) (FFFFh if current printer not compatible with NTNX) 01h MW386 Return: DX = MW386 printer number 02h MW386 v2+ BX = logical device number 00h-03h = LPT1-LPT4 04h-07h = COM1-COM4 Return: DX = MW386 printer number (FFFFh = none) Return: AL = status (see AH=81h) Note: modes 00h and 01h return the printer number of logical LPT1 only SeeAlso: AH=94h --------N-1796------------------------------- INT 17 - Alloy NTNX - SET SERIAL PORT PARAMETERS AH = 96h AL = 00h Note: documentation states that this is a NOP, doing only XOR AX,AX before returning SeeAlso: INT 14/AH=24h --------N-1797------------------------------- INT 17 - Alloy NTNX, MW386 - SET DATA DRIVEN PRINT BREAK AH = 97h AL = mode 00h NTNX compatibility 02h MW386 v2+ BX = logical device number 00h-03h = LPT1-LPT4 04h-07h = COM1-COM4 CH,CL,DH = three character break sequence DL = subfunction 00h set break string else reset break Return: AL = status (see AH=81h) Notes: mode 00h affects only logical LPT1 when the break string is encountered, the spool file will be closed and queued for printing automatically the break string is not permanently saved, and will be reset each time MW386 or the user is rebooted SeeAlso: AH=9Bh --------N-1798------------------------------- INT 17 - Alloy NTNX,MW386 - RESTART PRINTER AH = 98h AL = 00h DL = printer number (FFh=current) Return: AL = status 00h successful 01h incorrect printer 02h task not found Note: MW386 supports this function for compatibility only; it is a NOP --------N-1799------------------------------- INT 17 - Alloy NTNX, MW386 - GET/SET PRINTER MODE AH = 99h AL = mode 00h NTNX compatibility DL = NTNX printer number (see AH=88h) (FFh = task's current logical LPT1) DH = mode bit 0: get mode if 1, set mode if 0 bit 1: private ("attached") bit 2: direct instead of spooled bits 3-7 reserved (0) 01h MW386 DX = MW386 printer number CL = mode (as for DH above) Return: AL = status (see AH=81h) DH = mode (bits 1 and 2 set as above) DL = printer owner's user number if not spooled --------N-179A------------------------------- INT 17 - Alloy NTNX,MW386 - SET TAB EXPANSION AH = 9Ah AL = mode 00h NTNX compatibility DX = NTNX printer number (see AH=88h) (FFFFh = current logical LPT1) 01h MW386 DX = MW386 printer number CL = tab length (00h = no expansion, 01h-63h = spaces per tab) Return: AL = status (see AH=81h) Note: beginning with MW386 v2.0, tab expansion is set on a per-printer basis rather than a per-user basis; NTNX and MW386 v1.x ignore DX SeeAlso: AH=A4h --------N-179B------------------------------- INT 17 - Alloy NTNX,MW386 - SET PRINT BREAK TIMEOUT AH = 9Bh AL = mode 00h NTNX compatibility CX = timeout value in clock ticks (1/18 sec) (00h = never) 01h MW386 CX = timeout value in seconds (00h = never) 02h MW386 v2+ BX = logical device number 00h-03h = LPT1-LPT4 04h-07h = COM1-COM4 CX = timeout value in seconds (00h = never) Return: AL = status (see AH=81h) Notes: modes 00h and 01h affect only the current logical LPT1 if no data is sent to a printer for the specified amount of time, the spool file will be closed and queued for printing automatically SeeAlso: AH=97h --------N-17A0------------------------------- INT 17 - Alloy MW386 - SPOOL COPY OF FILE AH = A0h AL = mode 00h NTNX compatibility DX = ??? (NTNX, MW386 v1.x only) 02h MW386 v2+ BX = logical device number 00h-03h = LPT1-LPT4 04h-07h = COM1-COM4 CX:SI -> ASCIZ pathname Return: AL = status (see AH=81h) Notes: makes a copy of the specified file in the spooler's directory, allowing the original file to be modified or deleted while the copy is printed in mode 00h, the file is printed on logical LPT1 SeeAlso: AH=90h --------N-17A4------------------------------- INT 17 - Alloy MW386 - ENABLE/DISABLE FORM FEED AH = A4h AL = new state 00h form feed after end of print job disabled 01h form feed enabled Return: AL = status (see AH=81h) Note: only affects the current logical LPT1 SeeAlso: AH=9Ah,AH=A6h,INT 7F/AH=05h"NTNX (Host)" --------N-17A6------------------------------- INT 17 - Alloy MW386 - ENABLE/DISABLE BANNER PAGE AH = A6h AL = new state 00h banner page before print job disabled 01h banner page enabled Return: AL = status (see AH=81h) Note: only affects the current logical LPT1 SeeAlso: AH=A4h --------N-17A7------------------------------- INT 17 - Alloy MW386 v2+ - GET/SET SPOOL FLAGS AH = A7h AL = spool flags (see below) BX = logical device number 00h-03h = LPT1-LPT4 04h-07h = COM1-COM4 Return: AL = status (see AH=81h) Note: the documentation does not state which register contains the result of a GET SeeAlso: AH=A4h,AH=A6h Bitfields for spool flags: Bit(s) Description 0 banner page enabled (see AH=A4h) 1 form feed enabled (see AH=A6h) 2-6 reserved (0) 7 set flags if 1, get flags if 0 --------N-17A8------------------------------- INT 17 - Alloy MW386 - DEFINE TEMPORARY FILENAME AH = A8h CX:SI -> ASCIZ filename without extension (max 8 chars) Return: AL = status (see AH=81h) Note: allows application to specify banner page filename for spool files collected from the application's printer output SeeAlso: AH=A9h --------N-17A9------------------------------- INT 17 - Alloy MW386 - CHANGE TEMPORARY SPOOL DRIVE AH = A9h AL = new spool drive (2=C:,3=D:,etc) Return: AL = status (see AH=81h) Note: does not remove previous spooling directory since jobs may be pending SeeAlso: AH=A8h --------N-17AA------------------------------- INT 17 - Alloy MW386 v2+ - GET REAL-TIME PRINTER STATUS AH = AAh AL = mode 00h NTNX DX = NTNX printer number (see AH=88h) 01h MW386 DX = MW386 printer number Return: AH = instantaneous printer status 00h printer ready 01h not ready 12h off line 13h out of paper 14h general device failure 15h device timeout 16h bad device number --------N-17AF------------------------------- INT 17 - Alloy MW386 - CHECK SPOOLER AH = AFh Return: AX = 55AAh if spooler available --------c-17C0------------------------------- INT 17 - PC Magazine PCSpool - GET CONTROL BLOCK ADDRESS AH = C0h DX = printer port (0-3) Return: ES:BX -> control block (see below) SeeAlso: AH=C1h Format of control block: Offset Size Description 00h WORD printer number 02h WORD address of printer status port 04h WORD number of first record in queue 06h WORD number of last record in queue 08h DWORD characters already printed 0Ch DWORD number of characters remaining 10h DWORD pointer to dequeue buffer 14h DWORD previous count of characters printed 18h DWORD number of clock ticks taken to print them 1Ch WORD offset of next character to output 1Eh WORD offset of next character to print 20h WORD pointer to spooling queue record 22h BYTE current spooling status 23h BYTE current printer status: 00h OK 01h not ready 02h paused with message 03h paused 04h initializing FEh non-existent port FFh not spooled 24h BYTE current control record type 25h WORD observed printer speed 27h WORD characters to print per service 29h BYTE 01h if disk write needed 2Ah BYTE 01h if queued data should be flushed 2Bh BYTE 01h to update cps status --------c-17C1-------------------------------- INT 17 - PC Magazine PCSpool - BUILD PAUSE CONTROL RECORD AH = C1h DX = printer port (0-3) DS:SI -> ASCIZ string to save for display Note: flushes pending writes SeeAlso: AH=C0h,AH=C2h --------c-17C2------------------------------- INT 17 - PC Magazine PCSpool - FLUSH PENDING WRITES AH = C2h DX = printer port (0-3) SeeAlso: AH=C3h --------c-17C3------------------------------- INT 17 - PC Magazine PCSpool - CANCEL PRINTER QUEUE (FLUSH ALL QUEUED OUTPUT) AH = C3h DX = printer port (0-3) SeeAlso: AH=C2h,AH=C7h --------c-17C4------------------------------- INT 17 - PC Magazine PCSpool - QUERY SPOOLER ACTIVE AH = C4h Return: DI = B0BFh SI = segment --------c-17C5------------------------------- INT 17 - PC Magazine PCSpool - JOB SKIP PRINTER QUEUE AH = C5h DX = printer port (0-3) Note: cancels up to the pause record --------c-17C6------------------------------- INT 17 - PC Magazine PCSpool - CHECK PRINTER QUEUE STATUS AH = C6h DX = printer port (0-3) Return: AX = 0 printer not active or at pause = 1 printer busy --------c-17C7------------------------------- INT 17 - PC Magazine PCSpool - CLOSE QUEUE AH = C7h DX = printer port (0-3) SeeAlso: AH=C3h --------P-17CD00----------------------------- INT 17 - INSET - EXECUTE COMMAND STRING AX = CD00h DS:DX -> ASCIZ command string (max 80 bytes) Return: CX = 07C2h (1986d) Note: user interface menus pop up after last command, unless that command exits INSET --------P-17CD01----------------------------- INT 17 - INSET - GET IMAGE SIZE AX = CD01h DS:DX -> ASCIZ name of image file Return: AX = height in 1/720th inch BX = width in 1/720th inch CX = 07C2h (1986d) --------P-17CD02----------------------------- INT 17 - INSET - INITIALIZE AX = CD02h Return: CX = 07C2h (1986d) Note: all open files are closed and the printer is reset SeeAlso: AX=CD04h --------P-17CD03----------------------------- INT 17 - INSET - EXECUTE INSET MENU WITHIN OVERRIDE MODE AX = CD03h Return: CX = 07C2h (1986d) --------P-17CD04----------------------------- INT 17 - INSET - INITIALIZE LINKED MODE AX = CD04h ES:SI -> FAR routine for linked mode Return: CX = 07C2h Note: calling sequence for linked-mode routine AL = 00h send character in BL to printer = 01h send CX bytes from DS:DX to printer = 02h move print head to horizontal starting position of image return code for linked-mode routine: AX = 0000h success = 0001h failure SeeAlso: AX=CD02h,AX=CD08h --------P-17CD05----------------------------- INT 17 - INSET - START MERGING IMAGE INTO TEXT AX = CD05h DS:DX -> ASCIZ name of PIX file CX = left margin of text in 1/720th inch Return: AH = printer type 00h page-oriented (multiple images may be placed side-by-side) 01h line-oriented (use AX=CD06h for vertical paper movement) CX = 07C2h (1986d) SeeAlso: AX=CD07h --------P-17CD06----------------------------- INT 17 - INSET - GRAPHICS LINE FEED AX = CD06h Return: AH = completion status 00h image complete 01h image incomplete CX = 07C2h (1986d) SeeAlso: AX=CD09h --------P-17CD07----------------------------- INT 17 - INSET - FLUSH GRAPHICS FROM MERGE BUFFER AX = CD07h Return: CX = 07C2h SeeAlso: AX=CD05h --------P-17CD08----------------------------- INT 17 - INSET - CANCEL LINK MODE AX = CD08h Return: CX = 07C2h SeeAlso: AX=CD04h --------P-17CD09----------------------------- INT 17 - INSET - ALTER TEXT LINE SPACING AX = CD09h CX = line spacing in 1/720th inch Return: CX = 07C2h Note: not yet implemented, line spacing is currently fixed at 1/6 inch SeeAlso: AX=CD06h --------P-17CD0A----------------------------- INT 17 - INSET - GET SETUP AX = CD0Ah DS:DX -> buffer for IN.SET data Return: CX = 07C2h --------P-17CD0B----------------------------- INT 17 - INSET - START GETTING SCALED IMAGE AX = CD0Bh DS:SI -> ASCIZ pathname of .PIX file BX = number of bitplanes CX = number of rows in output bitmap DX = number of columns in output bitmap Return: AX = status 0000h OK FFFFh error Note: image is returned in strips by repeated calls to AX=CD0Ch --------P-17CD0C----------------------------- INT 17 - INSET - GET NEXT IMAGE STRIP AX = CD0Ch Return: AX = status 0000h OK but not complete 0001h OK and image complete FFFFh error DS:SI -> buffer (max 4K) for bit map strip CX = start row DX = number of rows BX = offset in bytes between bit planes Note: buffer may be overwritten by subsequent calls SeeAlso: AX=CD0Bh --------P-17F0------------------------------- INT 17 - NorthNet Jetstream API - INSTALLATION CHECK AH = F0h DX = printer port (0-3) Return: AX = 0001h Jetstream present else non-Jetstream port Note: NorthNet Jetstream is a high-performance DMA-driven parallel card able to drive printers at up to 80000 characters per second --------P-17F1------------------------------- INT 17 - NorthNet Jetstream API - PRINT DATA BUFFER AH = F1h CX = data buffer length DX = printer port (0-3) DS:SI -> data buffer Return: AX = status 0000h printer not ready (see also AH=02h) other printing started SeeAlso: AH=00h,AH=F2h,AH=F3h,AH=F5h --------P-17F2------------------------------- INT 17 - NorthNet Jetstream API - GET PRINT PROGRESS STATUS AH = F2h DX = printer port (0-3) Return: AX = status 0000h prior print request finished other number of characters left to print SeeAlso: AH=02h,AH=F1h,AH=F3h --------P-17F3------------------------------- INT 17 - NorthNet Jetstream API - ABORT PRINT OPERATION AH = F3h DX = printer port (0-3) Return: AX = number of unprinted characters due to abort SeeAlso: AH=F1h,AH=F4h --------P-17F4------------------------------- INT 17 - NorthNet Jetstream API - SET COMPLETION (POST) ADDRESS AH = F4h DX = printer port (0-3) DS:DS -> FAR post address (called with interrupts on) SeeAlso: AH=F1h,AH=F3h --------P-17F5------------------------------- INT 17 - NorthNet Jetstream API - PRINT DATA BUFFER FROM EXTENDED MEMORY AH = F5h CX = data buffer length DX = printer port (0-3) DS:SI -> data buffer (32-bit physical address) Return: AX = status 0000h printer not ready (see also AH=02h) other printing started SeeAlso: AH=F1h --------c-17FF--BX0000----------------------- INT 17 U - PC-MOS/386 v5.01 - PRINT SPOOLER - CLOSE SPOOL FILE AH = FFh BX = 0000h CX = 0000h DX = printer port number Return: AH = printer status (see AH=00h) Program: PC-MOS/386 v5.01 is a multitasking, multiuser MS-DOS 5.0-compatible operating system by The Software Link, Inc. Desc: close the spool file immediately instead of waiting for the close time to elapse SeeAlso: AH=01h,AH=03h"PC-MOS" --------B-18--------------------------------- INT 18 - DISKLESS BOOT HOOK (START CASSETTE BASIC) Desc: called when there is no bootable disk available to the system Notes: only PCs produced by IBM contain BASIC in ROM, so the action is unpredictable on compatibles; this interrupt often reboots the system, and often has no effect at all network cards with their own BIOS can hook this interrupt to allow a diskless boot off the network (even when a hard disk is present if none of the partitions is marked as the boot partition) SeeAlso: INT 86"NetBIOS" --------J-1800------------------------------- INT 18 - NEC PC-9800 series - KEYBOARD - GET KEYSTROKE AH = 00h Return: AX = keystroke SeeAlso: AH=01h,AH=02h,INT 16/AH=00h --------J-1801------------------------------- INT 18 - NEC PC-9800 series - KEYBOARD - CHECK FOR KEYSTROKE AH = 01h Return: ZF set if no keystroke available ZF clear if keystroke available AX = keystroke SeeAlso: AH=00h,AH=02h,INT 16/AH=01h --------J-1802------------------------------- INT 18 - NEC PC-9800 series - KEYBOARD - GET SHIFT STATUS AH = 02h Return: AL = shift flags SeeAlso: AH=00h,AH=02h,AH=03h,AH=04h,INT 16/AH=02h --------J-1803------------------------------- INT 18 - NEC PC-9800 series - KEYBOARD - INITIALIZE AH = 03h ??? Return: ??? SeeAlso: AH=00h,AH=04h --------J-1804------------------------------- INT 18 - NEC PC-9800 series - KEYBOARD - KEY PRESSED AH = 04h ??? Return: ??? Note: details are not available at this time SeeAlso: AH=00h,AH=02h,INT 16/AH=00h,INT 16/AH=01h,INT 16/AH=02h --------J-18--------------------------------- INT 18 - NEC PC-9800 series - VIDEO AH = function 0Ah set video mode 0Bh get video mode 0Ch start text screen display 0Dh end text screen display 0Eh set single display area 0Fh set multiple display area 10h set cursor shape 11h display cursor 12h terminate cursor 13h set cursor position 14h read font patter 16h initialize text video RAM 1Ah define user character ??? Return: ??? Notes: details are not available at this time text video RAM is located at segments A000h (characters) and A200h (attributes) ----------185350BX4849----------------------- INT 18 - SPHINX C-- - WB.COM - API AX = 5350h ('SP') BX = 4849h ('HI') CX = 4E58h ('NX') DH = function 01h set ??? DL = ??? 02h get ??? Return: DL = ??? 03h get ??? Return: ES:DI -> ??? data buffer 06h ??? Return: AX = 7370h ('sp') if installed BX = 6869h ('hi') if installed CX = 6E78h ('nx') if installed Program: SPHINX C-- is a shareware compiler by Peter Cellik for a language which is a cross between C and assembler; WB.COM is the driver which launches the WorkBench --------s-186900----------------------------- INT 18 - Gravis Ultra Sound YEA_GUS.EXE - GET STATUS AX = 6900h Return: AX = amount of DRAM on card or 0000h if GUS not available Program: YEA_GUS is a driver for the Graphics Ultra Sound which hooks INT 18h and then shells out the the program requiring its services SeeAlso: AX=6901h,AX=690Ah,AX=690Bh --------s-186901----------------------------- INT 18 - Gravis Ultra Sound YEA_GUS.EXE - RESET AX = 6901h BX = number of active voices (14-32) Return: nothing SeeAlso: AX=6900h --------s-186902----------------------------- INT 18 - Gravis Ultra Sound YEA_GUS.EXE - SET VOLUME FOR SPECIFIC VOICE AX = 6902h BX = voice number (00h-1Fh) CX = linear volume (0000h-01FFh) Return: nothing SeeAlso: AX=6900h,AX=6903h,AX=6904h,AX=6909h,AX=690Ah --------s-186903----------------------------- INT 18 - Gravis Ultra Sound YEA_GUS.EXE - SET FREQUENCY FOR VOICE AX = 6903h BX = voice number (00h-1Fh) CX = frequency in Hz (0-44100) Return: nothing SeeAlso: AX=6902h,AX=6904h --------s-186904----------------------------- INT 18 - Gravis Ultra Sound YEA_GUS.EXE - SET LEFT/RIGHT BALANCE AX = 6904h BX = voice number (00h-1Fh) CX = balance (0 = left, 7 = even, 15 = right) Return: nothing SeeAlso: AX=6902h,AX=6903h --------s-186905----------------------------- INT 18 - Gravis Ultra Sound YEA_GUS.EXE - PLAY MUSIC AX = 6905h BL = voice number BH = sample type (0 = 8-bit, 1 = 16-bit) CL = looping type (0 = none, 1 = forward, 2 = back and forth) CH:DI = 20-bit starting address for voice data DL:SI = 20-bit address for loop start DH:BP = 20-bit address for loop end SeeAlso: AX=6903h,AX=6906h,AX=690Bh --------s-186906----------------------------- INT 18 - Gravis Ultra Sound YEA_GUS.EXE - LOAD SOUND DATA AX = 6906h BL = data format (1 = twos-complement, 0 = not) BH = sample type (0 = 8-bit, 1 = 16-bit) CX = number of bytes to send ES:SI -> buffer containing data DL:DI = 20-bit address of GUS DRAM at which to load sound data SeeAlso: AX=6900h,AX=6905h,AX=690Ch --------s-186907----------------------------- INT 18 - Gravis Ultra Sound YEA_GUS.EXE - STOP VOICE AX = 6907h BX = voice number (00h-1Fh) Return: nothing SeeAlso: AX=6908h,AX=690Dh --------s-186908----------------------------- INT 18 - Gravis Ultra Sound YEA_GUS.EXE - SET VOICE END AX = 6908h BX = voice number (00h-1Fh) CL:DX = 20-bit ending address Return: nothing SeeAlso: AX=690Bh --------s-186909----------------------------- INT 18 - Gravis Ultra Sound YEA_GUS.EXE - RAMP VOLUME AX = 6909h BL = voice number (00h-1Fh) BH = looping type (0 = none, 1 = forward, 2 = back and forth) CX = starting volume DX = ending volume DI:SI = time Return: nothing SeeAlso: AX=6902h,AX=690Ah --------s-18690A----------------------------- INT 18 - Gravis Ultra Sound YEA_GUS.EXE - GET VOLUME AX = 690Ah BX = voice number (00h-1Fh) Return: AX = current non-linear volume for voice SeeAlso: AX=6902h,AX=6909h --------s-18690B----------------------------- INT 18 - Gravis Ultra Sound YEA_GUS.EXE - GET POSITION AX = 690Bh BX = voice number Return: BX:AX = 20-bit address at which voice is playing SeeAlso: AX=6900h,AX=6905h,AX=6908h --------s-18690C----------------------------- INT 18 - Gravis Ultra Sound YEA_GUS.EXE - SAVE SOUND DATA AX = 690Ch BL = data format (1 = twos-complement, 0 = not) BH = sample type (0 = 8-bit, 1 = 16-bit) CX = number of bytes to get ES:SI -> buffer for retrieved data DL:DI = 20-bit address in GUS DRAM from which to read voice data Return: nothing SeeAlso: AX=6906h --------s-18690D----------------------------- INT 18 - Gravis Ultra Sound YEA_GUS.EXE - RESTART VOICE AX = 690Dh BX = voice CX = sample type (0 = 8-bit, 1 = 16-bit) DX = looping type (0 = none, 1 = forward, 2 = back and forth) Return: CX = balance value SeeAlso: AX=6907h,AX=6908h --------s-188000----------------------------- INT 18 - Gravis Ultra Sound EURO_MOD.EXE - INITIALIZE AX = 8000h Program: EURO_MOD is a .MOD file player for the Gravis Ultra Sound which hooks INT 18h and then shells out to the program requiring its services SeeAlso: AX=8001h,AX=8004h --------s-188001----------------------------- INT 18 - Gravis Ultra Sound EURO_MOD.EXE - LOAD .MOD FILE AX = 8001h BX:CX -> ASCIZ filename SeeAlso: AX=8000h,AX=8002h --------s-188002----------------------------- INT 18 - Gravis Ultra Sound EURO_MOD.EXE - PLAY .MOD FILE AX = 8002h SeeAlso: AX=8002h,AX=8003h --------s-188003----------------------------- INT 18 - Gravis Ultra Sound EURO_MOD.EXE - STOP PLAYING AX = 8003h --------s-188004----------------------------- INT 18 - Gravis Ultra Sound EURO_MOD.EXE - SHUTDOWN AX = 8004h SeeAlso: AX=8000h,AX=8003h --------B-19--------------------------------- INT 19 - SYSTEM - BOOTSTRAP LOADER Desc: This interrupt reboots the system without clearing memory or restoring interrupt vectors. Because interrupt vectors are preserved, this interrupt usually causes a system hang if any TSRs have hooked vectors from 00h through 1Ch, particularly INT 08. Notes: Usually, the BIOS will try to read sector 1, head 0, track 0 from drive A: to 0000h:7C00h. If this fails, and a hard disk is installed, the BIOS will read sector 1, head 0, track 0 of the first hard disk. This sector should contain a master bootstrap loader and a partition table. After loading the master boot sector at 0000h:7C00h, the master bootstrap loader is given control. It will scan the partition table for an active partition, and will then load the operating system's bootstrap loader (contained in the first sector of the active partition) and give it control. true IBM PCs and most clones issue an INT 18 if neither floppy nor hard disk have a valid boot sector to accomplish a warm boot equivalent to Ctrl-Alt-Del, store 1234h in 0040h:0072h and jump to FFFFh:0000h. For a cold boot equivalent to a reset, store 0000h at 0040h:0072h before jumping. VDISK.SYS hooks this interrupt to allow applications to find out how much extended memory has been used by VDISKs (see below). DOS 3.3+ PRINT hooks INT 19 but does not set up a correct VDISK header block at the beginning of its INT 19 handler segment, thus causing some programs to overwrite extended memory which is already in use. the default handler is at F000h:E6F2h for 100% compatible BIOSes MS-DOS 3.2+ hangs on booting (even from floppy) if the hard disk contains extended partitions which point at each other in a loop, since it will never find the end of the linked list of extended partitions SeeAlso: INT 14/AH=17h,INT 18 Format of VDISK header block (at beginning of INT 19 handler's segment): Offset Size Description 00h 18 BYTEs n/a (for VDISK.SYS, the device driver header) 12h 11 BYTEs signature string "VDISK Vn.m" for VDISK.SYS version n.m 1Dh 15 BYTEs n/a 2Ch 3 BYTEs linear address of first byte of available extended memory Format of hard disk master boot sector: Offset Size Description 00h 446 BYTEs Master bootstrap loader code 1BEh 16 BYTEs partition record for partition 1 (see below) 1CEh 16 BYTEs partition record for partition 2 1DEh 16 BYTEs partition record for partition 3 1EEh 16 BYTEs partition record for partition 4 1FEh WORD signature, AA55h indicates valid boot block Format of partition record: Offset Size Description 00h BYTE boot indicator (80h = active partition) 01h BYTE partition start head 02h BYTE partition start sector (bits 0-5) 03h BYTE partition start track (bits 8,9 in bits 6,7 of sector) 04h BYTE operating system indicator (see below) 05h BYTE partition end head 06h BYTE partition end sector (bits 0-5) 07h BYTE partition end track (bits 8,9 in bits 6,7 of sector) 08h DWORD sectors preceding partition 0Ch DWORD length of partition in sectors Values for operating system indicator: 00h empty 01h DOS 12-bit FAT 02h XENIX root file system 03h XENIX /usr file system (obsolete) 04h DOS 16-bit FAT 05h DOS 3.3+ extended partition 06h DOS 3.31+ Large File System 07h QNX 07h OS/2 HPFS 07h Advanced Unix 08h AIX bootable partition, SplitDrive 09h AIX data partition 09h Coherent filesystem 0Ah OS/2 Boot Manager 0Ah OPUS 0Ah Coherent swap partition 10h OPUS 18h AST special Windows swap file 24h NEC MS-DOS 3.x 40h VENIX 80286 50h Disk Manager, read-only partition 51h Disk Manager, read/write partition 51h Novell??? 52h CP/M 52h Microport System V/386 56h GoldenBow VFeature 61h SpeedStor 63h Unix SysV/386, 386/ix 63h Mach, MtXinu BSD 4.3 on Mach 63h GNU HURD 64h Novell NetWare 65h Novell NetWare (3.11) 70h DiskSecure Multi-Boot 75h PC/IX 80h Minix v1.1 - 1.4a 81h Minix v1.4b+ 81h Linux 81h Mitac Advanced Disk Manager 82h Linux Swap partition (planned) 84h OS/2-renumbered type 04h partition (related to hiding DOS C: drive) 93h Amoeba file system 94h Amoeba bad block table B7h BSDI file system (secondarily swap) B8h BSDI swap partition (secondarily file system) C1h DR-DOS 6.0 LOGIN.EXE-secured 12-bit FAT partition C4h DR-DOS 6.0 LOGIN.EXE-secured 16-bit FAT partition C6h DR-DOS 6.0 LOGIN.EXE-secured Huge partition DBh CP/M, Concurrent CP/M, Concurrent DOS DBh CTOS (Convergent Technologies OS) E1h SpeedStor 12-bit FAT extended partition E4h SpeedStor 16-bit FAT extended partition F2h DOS 3.3+ secondary FEh LANstep FFh Xenix bad block table --------!------------------------------------