home *** CD-ROM | disk | FTP | other *** search
- ASDMOVE Utility CUT Objects
- Library #1
- By Rus Phillips
- May 6, 1991
-
- FILES IN THIS ARCHIVE:
-
- CUTLIB#1.DOC - This file
- SUB.CUT - ASDMOVE Cut file
- FARM.CUT - "
- FARM2.CUT - "
- TANKFARM.CUT - "
- WATERTWR.CUT - "
- SMALFACT.CUT - "
- DRIVEIN.CUT - "
- GOLFCORS.CUT - "
- SEWAGPLT.CUT - "
- FISHHATC.CUT - "
- SCHOOL.CUT - "
-
- REQUIREMENTS:
-
- You must have Microsoft Flight Simulator 4.0, the Aircraft and
- Scenery Designer, and the ASDMOVE Utility to use the files.
-
- COMMENTS:
-
- ASDMOVE is a great utility for A&SD that allows you to "bulk
- move" ASD scenery objects. With bulk processing, one can move huge
- entire scenery areas around within a couple of minutes. It is a great
- utility and I highly reccomend it.
- One of ASDMOVE's functions is a "cut and paste" utility. This
- allows you to "cut" a part of the scenery out, and "paste" it into
- another scenery file. That's where these *.CUT files come in.
- The CUT files in this zipfile are objects like farms and other VFR
- objects that appear repititiously in many areas. Some of them, like the
- SUB and WATERTWR, use a couple of ASD tricks, but all would be very
- tedious to use more than once in an ASD scenery file.
-
- If you do not have a copy of ASDMOVE, then you can get it from
- the Nexus BBS at (703) 891-2108. It should be available from most
- Flight Simulator-oriented BBS's. You can also get ASDMOVE from the
- author by sending a $10 check to:
-
- Steve Wigginton
- 6895 Olive Tree Way
- Citrus Heights, CA 95610
- DESCRIPTIONS:
-
- SUB.CUT - File Size: 471 bytes - Hdg: E/W
- This is a large nuclear submarine that I made using a small
- black mountain for the hull, and two buildings for the conning tower
- and fin. It could be a 688, or an Ohio, take your pick. I thought this
- was a neat looking object, so I included it. I doubt if you'll use it
- more than a couple of times unless you are doing scenery for Groton!
- (Or if you're Tom Clancy.)
-
- FARM.CUT - File Size: 522 bytes - Hdg: N/S
- This is a farm which consists of a single 3000ft. by 3000ft. field,
- a farmhouse, and a barn. It's great for filling in "empty" areas in your
- scenery.
-
- FARM2.CUT - File Size: 578 bytes - Hdg: N/S
- This is the same size and makeup as the other farm. It's just a
- little different so you will have varitey, in case you use more than
- a few farms.
-
- TANKFARM.CUT - File Size: 861 bytes - Hdg: NE/SW
- A medium size tank farm with 8 fuel tanks and a pumping
- station.
-
- WATERTWR.CUT - File Size: 345 bytes
- This is a nice blue watertower. I made it with a 150 foot tall
- blue tree and some supports. Looks pretty good. Not as good as
- Laeeming Wheeler's SEE watertowers, but pretty good.
-
- SMALFACT.CUT - File Size: 319 bytes - Hdg: N/S
- A small factory with a smokestack. Not real big, but good for
- where factories show up on visual approaches.
-
- DRIVEIN.CUT - File Size: 773 bytes - Hdg: N/S
- This is a drive-in theater, complete with screen, projection
- booth, and a few cars. (Maybe someone will use a dynamic car that
- bounces with this! haha!)
-
- GOLFCORS.CUT - File Size: 1282 bytes
- This file area is kind of large, about 4000 feet square, so be
- careful how you place it. Golf players will note that the course only
- has 13 holes. I did this to save space and frame rate. Since these
- cutfiles aren't really meant to accuratley reflect a real place, as long
- as it looks cool, it's good.
-
- SEWAGPLT.CUT - File Size: 1163 bytes - Hdg: N/S
- Smelly, but they're marked on VFR Terminal Area charts, and
- make good low-altitude checkpoints. Eight "poop pools" (for lack of a
- better term) and a building.
-
- FISHHATC.CUT - File Size: 502 bytes - Hdg: N/S
- A fish hatchery with four pools and a building.
-
- SCHOOL.CUT - File Size: 1067 bytes - Hdg: N/S
- This is a High School or Junior High building with a track,
- football field, bleachers, and a baseball diamond.
-
- AUTHOR AND LICENCE:
-
- If you have any comments or questions, I can be contaced at the
- following address.
-
- Rus Phillips
- 608 Falmouth Dr.
- Fredericksburg, Va. 22405
- Telephone: (703) 371-3191
-
- You are encouraged to distruibute this software freely, and use
- it in your scenery files. However, if you change any of the CUT files, don't
- distribute it with any of the other files in this archive.
- All of the files in this archive are intended for non-commercial,
- public domain use, and may be used, copied, and distributed subject to this
- licence. This program is supplied "as is" and without any warranties,
- express or implied, including fitness or suitability for a particular
- purpose. The authors cannot be held liable for any accidental damages
- incurred. The files in this archive may not be sold without express
- permission of the author.
-
- Microsoft Flight Simulator and the Microsoft Aircraft & Scenery
- Designer are trademarks of Microsoft Corporation.
- ASDMOVE is Copyright 1991, Steve Wigginton