0 Insufficient memory for this operation;close one or more Windows applications to increase available memory.
1 Control Panel
2 setup
5 Cannot display cursor blinking rate;to display rate, close one or more Windows applications and try again
6 TEST
7 None
8 on
9 Close
10 Continue
11 You do not have the proper privilege level to change the System Time.
16 CtlPanelClass
17 CtlChildClass
32 Invalid baud rate;the baud rate must be a positive value.
33 Could not install the "%s" font. Check the disk space, the source directory or your write privileges for the target directory.
34 This printer is already installed on this port. Select another port.
35 You are already using %s to adjust your network connections.\n\nChoose the OK button to switch to the dialog you were using.
36 You are already using %s to install or configure a printer.\n\nChoose the OK button to switch to the dialog you were using.
37 ERROR
38 The specified path points to a file that may not be available during later Windows sessions. Do you want to continue?
39 Windows did not make a copy of the font '%s'; do you want to delete the original font file?
40 The font could not be installed because the registry memory quota has been exceeded. Use the System applet to increase the registry quota and then more fonts can be installed.
41 %s font is a compressed file and cannot be used\nby Windows unless it is copied to your System directory.\nDo you want to continue?
42 Cannot copy file to itself
43 Insufficient memory to copy file;close one or more Windows applications to increase available memory.
44 Insufficient disk space to copy %s;delete one or more files to increase available disk space.
106 Scheme name cannot contain left or right brace.
107 Scheme name cannot be blank.
108 OK
160 No fonts installed
161 A sample is not available because the TrueType\noption is off. To use TrueType fonts, select Enable TrueType Fonts in the TrueType dialog.
162 Font Sample
163 Insufficient memory to display all fonts
164 Unable to remove %s
165 Insufficient memory
166 Insufficient disk space
167 Unable to create file
168 Drive door open
169 Unable to copy %s
170 Font already installed
171 %s is an invalid font file
172 %s is an invalid TrueType font file
173 Size of Font on Disk: %d KB
174 The copyright holder "%s" of the "%s" font will not allow their font to be converted to TrueType. Please contact the font vendor for more information.
175 The Type 1 version of the "%s" font is already installed. Continue installation of this font?
176 Unable to create %s, TrueType font not installed
177 The TrueType version of the "%s" font is already installed. Continue installation of this font?
178 Remove "%s" font?
179 Unable to install %s.
180 Unable to install font
181 %s is already installed. Remove this font and re-install.
182 TrueType is not currently enabled.\n\nYou must select the Enable TrueType Fonts option in the TrueType dialog and restart Windows before installing TrueType fonts.
183 Retrieving font names: %02d%%
184 No fonts selected.
185 More than one font is selected. Cannot display font sample. Select individual fonts to see a sample.
186 There is a problem with the font file. Cannot display font sample.
187 This is a scalable TrueType font which can be displayed on the screen and printed on your printer.
188 This is a bitmap or vector font.
189 No fonts found.
192 Converting %s to TrueType.
193 Screen font sample not available for this font.
194 The "%s" font will be installed on your system for use as a screen font, printer font or both.
195 This is a scalable TrueType font which can be displayed on the screen and printed on your printer. It also acts as the screen font for your scalable Type 1 font which can be printed on a PostScript printer.
196 This is a scalable Type 1 font which can only be printed on a PostScript printer.
197 The %s font is already installed as a PostScript printer font and cannot be converted to TrueType.
198 The %s font cannot be installed to the %s registry location. This is usually because you do not have the correct security permissions.
199 Installing font %d of %d...
200 Installing %s
201 The "%s" Type 1 font can be installed but you might not have the right to convert it to TrueType. Check your license agreement from "%s" and if necessary, contact them for permission to convert this font.\n \nTo continue installing the font, with or without converting it, choose Yes. To install the font without converting it to TrueType, choose No.\n \nDo you want to install and convert the font at this time?
202 Copying %s files
203 Could not create "%s" file. The "%s" file format is not supported.
204 Could not create "%s" file. The "%s" file is probably corrupt.
205 Could not create "%s" file. Error reading input file "%s" or "%s"
206 Could not create "%s" file. Check the disk space or your write privileges for the target directory.
207 Could not create "%s" file. Conversion of the "%s" font failed.
208 Fonts Applet
209 Cannot initialize Fonts Applet because Windows Fonts directory name is too long.
210 The font(s) cannot be installed on the system because of the security permissions set on the fonts registry location.
216 A:\
218 This keyboard cannot change its speed.
219 00000409
220 00000409
222 Metric
223 English
228
229 Sun
230 Sunday
231 Mar
232 March
233 dddd
234 MMMM
235 yyyy
236 Short Date Separator cannot be empty
237 Press OK when the correct Date, Time and Time Zone are displayed.
240 The Time Zone information cannot be found in the registry.
254 Insert %s or a disk with the updated %s in
255 Insert the disk with %s in
264 (None)
265 Patterns
266 Invalid Grid Granularity entry. Specify a number between 0 and 49.
268 WallPaper
269 TileWallPaper
270 *.BMP
271 CursorBlinkRate
272 Invalid Border Width entry. Specify a number between 1 and 50.
273 Unable to find wallpaper. Please make sure a valid file name has been entered.
274 (Default)
275 IconSpacing
276 Invalid Icon Spacing entry
277 Unlisted Pattern
278 Invalid Screen Saver Delay entry
279 *.SCR
280 *.IW
281 SCRNSAVE.SCR
282 (16-bit)
294 Remove "%s" color scheme?
295 Remove "%s" printer?
296 Remove "%s" font?
297 Remove "%s" pattern?
302 Default
303 ,Even,Odd,None,Mark,Space
304 ,1,1.5,2
305 ,Xon / Xoff,Hardware,None
306 New Port
307 Settings for %s
308 Pressing OK will delete the selected COM port.
309 To delete COM ports, you must be logged onto the Windows NT workstation as an Administrator.
311 Advanced Settings for %s
313 Invalid Base I/O Port Address.
314 There are no Serial Ports which can be setup on this system.
315 There are no user configurable Advanced I/O parameters for this COM port.
316 To change the Advanced I/O settings, you must be logged onto the Windows NT workstation as an Administrator.
317 To create new COM ports, you must be logged onto the Windows NT workstation as an Administrator.
318 The system cannot support a COM port number greater than 256.
319 To create new COM port I/O settings, you must be logged onto the Windows NT workstation as an Administrator.
320 Could not save settings to Registry Serial Parameters area.
322 Sunday
323 Monday
324 Tuesday
325 Wednesday
326 Thursday
327 Friday
328 Saturday
329 Sun
330 Mon
331 Tue
332 Wed
333 Thu
334 Fri
335 Sat
338 January
339 February
340 March
341 April
342 May
343 June
344 July
345 August
346 September
347 October
348 November
349 December
350 Jan
351 Feb
352 Mar
353 Apr
354 May
355 Jun
356 Jul
357 Aug
358 Sep
359 Oct
360 Nov
361 Dec
386 There is no mouse installed.\n\nUse Windows NT Setup to install a mouse.
500 Show list &for %d seconds
501 &User Environment Variables for %s
502 (dd an Unlisted OS)
503 (None - Choose at Startup time)
504 Invalid timeout entry
505 New OS must have a location entry
506 Error getting ComputerName.
507 Error getting UserName.
508 Cannot open USER Environment section in Registry.\nPossible registry corruption.
509 Cannot save new Environment variables in Registry.\nPossible registry corruption.
510 You must re-boot this system for the Virtual\nMemory Paging file changes to take effect.
511 You are not logged onto the Windows NT workstation as a member of the user group that has the right to view the workstation's Virtual Memory settings.
512 You must be logged onto this system as an Administrator to change the Virtual Memory settings.
513 Incorrect value. Enter an initial page file size between 2 and the free space available on the drive.
514 Incorrect value. Enter a maximum page file size that is greater than or equal to the initial page file size, and less than %d MB.
515 There is not enough space on this drive for the paging file size specified. Please enter a smaller number or free some disk space.
516 Drive %c: is too small for the maximum paging file size specified. Please enter a smaller number.
517 Could not read the current virtual memory settings.
518 MB
519 Cannot change Boot.ini file. Operating System and Timeout changes will not be saved.
520 Drive %c: does not have enough free space for the maximum paging file size specified. If you continue with this setting, the paging file will only grow to the size of the available free space.
521 Cannot open SYSTEM Environment section in Registry.\nPossible registry corruption.
522 You are not logged onto the Windows NT workstation as a member of the user group that has the right to view the workstation's Recovery settings.
523 Could not read the current recovery settings.
524 An error occured while saving the changes. Some changes will not be remembered.
525 Another file exists with the filename "%s". Do you wish to overwrite the existing file with a page file?
526 There is not enough space on this drive to create the page file size specified. At least %d Megabytes of free disk space must be left after the page file is created. Specify a smaller page file size or free some disk space.
527 There is not enough free space on the boot drive to enable crash recovery. At least %d Megabytes of free space on drive %c: are needed. Please free up some disk space and try again.
528 In order to create a debugging information file, the initial pagefile size on volume %c: must be at least %d megabytes. The initial pagefile size will be changed now.
529 If the pagefile on volume %c: has an initial size of less than %d megabytes, then the system is unable to create a debugging information file if a STOP error occurs. This feature will be disabled now.
530 If you want to write debugging information to a file, you must enter a filename.
531 Debugging information can be written only to local, writable disk drives. Please specify a path on a local disk drive.
532 The debugging information file path may be invalid or is currently inaccessible. Do you wish to change it?
533 The path for the debugging information file is too long. Please specify a path that is less than %ld characters.
534 The debugging information file path must be a fully qualified path such as c:indiremory.log
535 To increase the registry size limit by the amount specified, a bigger paging file is needed. The paging file size will be increased.
536 There is not enough space on the drives to set the registry size limit specified. Specify a smaller registry size limit or free some disk space.
537 The registry size limit must be larger than the current size of the registry. Specify a larger registry size limit.
538 The Alerter service is not running.\n\nFor an administrative alert to be sent during a STOP error, the Alerter service must be running. Please start the Alerter service by using the Services section of the control panel.
600 Changes the Windows screen colors
601 Installs and removes printers, and sets printing options
602 Adds and removes fonts and sets TrueType options
603 Specifies international settings
604 Specifies communications settings for serial ports
605 Specifies the keyboard repeat rate and delay
606 Changes settings for your mouse
607 Changes the date, time and time zone of your computer's clock
608 Changes the look of your desktop
610 Specifies settings for your network connections
611 Set Startup OS, virtual memory and edit environment variables
800 Decimal separator cannot be empty or contain digits
801 Invalid decimal digit entry
802 Date separator cannot be empty
803 Currency symbol cannot be empty or contain digits
804 Invalid decimal entry
805 The required driver is already on the system.
806 Do you want to use the current driver or install a new driver?
807 International - Drivers
808 There was an error initializing the International dialog; ensure that you have valid language.inf and layout.inf files in your Windows NT system directory.
809 This system lacks a properly setup/installed Locale entry for both the User and System default entries.
810 This system lacks a properly setup/installed Keyboard Layout entry for both the User and System default entries.
811 You must be logged onto this system as an Administrator to install a new option on the system.
812 The new Language selection will change the date/time, number and currency selections to match the country associated with this Language. These can be changed by re-entering this dialog box.
813 Invalid time separator entry
814 Thousand separator cannot contain digits
815 Invalid date separator entry
1000 System Setting Change
1001 Your TrueType system setting has changed.\n\n
1002 Your COM Port settings have changed.\n\n
1003 You will need to exit and restart Windows NT so that the new setting can take effect.