home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
CICA 1997 February
/
cicawindowscollection199702-1.iso
/
disc1
/
drivers
/
misc
/
82595.exe
/
OEMSETUP.INF
< prev
Wrap
INI File
|
1993-09-30
|
45KB
|
1,565 lines
;***********************************************************************
;
; OEMSETUP.INF
;
; Intel 82595 Ethernet LAN controller card and driver SETUP INF file.
;
;***********************************************************************
;-----------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with. The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
; Types specific to networking:
;
; NetAdapter, a netcard / adapter combination or just a netcard
; NetDriver, just a netcard driver
; NetTransport, a complete NDIS-compliant TDI transport stack
; NetService, an NT networking service
; NetWork, a complete network ensemble.
; NetProvider a complete network which supports NT MPR protocol
;-----------------------------------------------------------------------
[Identification]
OptionType = NetAdapter
;-----------------------------------------------------------------------
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA, EISA and MCA
;-----------------------------------------------------------------------
[PlatformsSupported]
ISA
EISA
; MCA
"Jazz-Internal Bus"
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------
[LanguagesSupported]
ENG
;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names. These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------
[Options]
I82595
;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user. There
; are separate sections for each language supported. The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------
[OptionsTextENG]
I82595 = "Intel 82595 Ethernet LAN Controller"
[Files-Inf]
1, oemsetup.inf, SIZE=50000, RENAME=$(!UG_Filename)
[Files-I82595]
1, I82595.SYS, SIZE=50000
;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************
[FileConstants]
;
; File names, etc.
;
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
;
; EventLog Message File
;
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
; Product Info
;
Manufacturer = "Intel"
ProductMajorVersion = "1"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
;
; Software
;
ProductSoftwareName = "I82595"
ProductSoftwareTitle = "Intel 82595 Ethernet LAN Controller Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\i82595.sys"
NetRuleSoftwareType = "i82595Sys ndisDriver i82595Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """I82595Sys"" yes no container"
NetRuleSoftwareClass = {"i82595Driver basic"}
NetRuleSoftwareBindable = {"i82595Driver i82595Adapter non exclusive 100"}
;
; Hardware
;
ProductHardwareName = "I82595"
ProductHardwareTitle = "Intel 82595 Ethernet LAN Controller"
NetRuleHardwareType = "i82595 i82595Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"i82595Adapter basic"}
;
; MicroChannel System ID Info
;
EE16_1BYTE = 139
EE16_2BYTE = 98
NETCARD_ID = 25227
;
; Registry Key
;
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[GeneralConstants]
;
; Program flow control variables.
;
from = ""
to = ""
;
; Return codes; Exit_Code is set to one of these
;
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
;MachineType = ""
;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
; Variables to support thermometer gauge and error dialogs
;
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
;
; Product Info
;
FunctionTitle = "Intel 82595 Ethernet LAN Controller Setup"
;
; Software
;
ProductSoftwareDescription = "Intel 82595 Ethernet LAN Controller Driver"
;
; Hardware
;
ProductHardwareDescription = "Intel 82595 Ethernet LAN Controller"
;
; Dialog Message Information
;
IRQList = {"3", "5", "9", "10", "11"}
IOReadyList = { "Early", "Late", "Never" }
TransceiverList = {"Thick Net (AUI/DIX)","Thin Net (BNC/COAX)","Twisted-Pair (TPE)"}
IOAddrList = ^(IOAddrChoices, 1)
IOAddrValues = ^(IOAddrChoices, 2)
[IOAddrChoices]
IOBase_1 = "0x300",768
IOBase_2 = "0x310",784
IOBase_3 = "0x320",800
IOBase_4 = "0x330",816
IOBase_5 = "0x340",832
IOBase_6 = "0x350",848
IOBase_7 = "0x360",864
IOBase_8 = "0x370",880
IOBase_9 = "0x200",512
IOBase_10 = "0x210",528
IOBase_11 = "0x220",544
IOBase_12 = "0x230",560
IOBase_13 = "0x240",576
IOBase_14 = "0x250",592
IOBase_15 = "0x260",608
IOBase_16 = "0x270",624
IOBase_17 = "0x380",896
IOBase_18 = "0x390",912
IOBase_19 = "0x3a0",928
IOBase_20 = "0x3b0",944
IOBase_21 = "0x3c0",960
IOBase_22 = "0x3d0",976
IOBase_23 = "0x3e0",992
IOBase_24 = "0x3f0",1008
IOBase_25 = "0x280",640
IOBase_26 = "0x290",656
IOBase_27 = "0x2a0",672
IOBase_28 = "0x2b0",688
IOBase_29 = "0x2c0",704
IOBase_30 = "0x2d0",720
IOBase_31 = "0x2e0",736
IOBase_32 = "0x2f0",752
[DialogConstantsENG]
;
; Common button names, etc.
;
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[date]
; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Source Media Descriptions]
1 = "Intel 82595 Driver Disk" , TAGFILE = disk1
;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
DlgType = "RadioCombination"
DlgTemplate = "EE_16"
Caption = $(FunctionTitle)
DlgText = "Please select values for the following fields:"
Combo1Label = "&Interrupt Number:"
Combo2Label = "I/O &Port Address:"
Combo3Label = "I/O &Channel Ready:"
Combo4Label = "&Transceiver Type:"
Combo1List = $(IRQList)
Combo1Out = $(IRQValue)
Combo2List = $(IOAddrList)
Combo2Out = $(IOAddrValue)
Combo3List = $(IOReadyList)
Combo3Out = $(IOReadyValue)
Combo4List = $(TransceiverList)
Combo4Out = $(TransceiverValue)
ComboListItemsIn = {Combo1List, Combo2List, Combo3List, Combo4List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out}
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = $(!IDH_DB_OEMNADIN_INS)
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
;
;
read-syms Identification
set !G:DebugOutputControl = 1
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
;
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
;
;
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
;
; Check if the platforms requested is supported
;
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;
; form a list of all the options and another of the text representing
;
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;------------------------------------------------------------------------
;
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
set !G:DebugOutputControl = 1
;
; Set default values for
;
Debug-Output "At InstallOption"
set Status = STATUS_FAILED
;
; extract parameters
;
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
Shell $(UtilityInf), GetBusTypeNum
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
Set PlatformList = ^(PlatformsSupported, 1)
Set MachineType = *($(PlatformList), $($R1))
Debug-Output "BusTypeNum is: "$($R1)
Debug-Output "MachineType is: "$(MachineType)
;
; Assume all is well.
;
set CommonStatus = STATUS_SUCCESSFUL
EndWait
;
; Set up the operation-mode-based variables and gaily welcome
; the user. If the "install mode" variable is improperly set,
; assume this is a new installation.
;
Begin = +
Debug-Output "At Begin"
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set ActivateDetection = TRUE
set StartLabel = configureadapter
;
; If MCA we cannot Configure, so just exit out.
;
ifstr(i) $(MachineType) == "MCA"
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the EtherExpress MCA driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
else
Debug-Output "Cannot configure the EtherExpress MCA adapter card."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
;
; You cannot config the software component
;
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the 82595 driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set ActivateDetection = TRUE
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
;===================================================
; Netcard Detection logic
;
; Initialize use of netcard detection;
; Construct require global parameter variables
;
Debug-Output "OEMNADIN.INF: =================================================="
Debug-Output "OEMNADIN.INF: STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "OEMNADIN.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
Debug-Output "OEMNADIN.INF: Option is: "$(Option)
Debug-Output "OEMNADIN.INF: !STF_NCDETECT is: "$(!STF_NCDETECT)
Debug-Output "OEMNADIN.INF: !STF_NCOPTION is: "$(!STF_NCOPTION)
Debug-Output "OEMNADIN.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
Debug-Output "OEMNADIN.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
Debug-Output "OEMNADIN.INF: MachineType is: "$(MachineType)
Debug-Output "OEMNADIN.INF: =================================================="
Set DetectedCard = FALSE
Ifstr(i) $(ActivateDetection) != TRUE
Goto $(StartLabel)
Endif
ifstr(i) $(MachineType) == "MCA"
goto CheckForMCA
endif
set IRQValue = *($(IRQList), 1)
set IOAddrValue = *($(IOAddrList), 1)
set IOReadyValue = *($(IOReadyList), 2)
set TransceiverValue = *($(TransceiverList), 3)
Ifstr(i) $(!STF_NCDETECT) == YES
Ifstr(i) $(!STF_NCOPTION) == $(Option)
Set DetectedCard = TRUE
Debug-Output "OEMNADIN.INF: Setting DetectedCard to TRUE"
Endif
Endif
;
; End Netcard Detection logic
;===================================================
Shell "" DebugConfiguration "After parameter querying"
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
Debug-Output "At installadapter"
;
; First, check whether the same version of the software exists
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
;
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
;
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
;
; Cannot Install the same software again
;
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
;
; Add a new adapter card?
;
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
;===================================================
; Netcard Detection logic
;
; If this is a detected card, query its parameters
; and merge them into the default list.
;
Ifstr(i) $(DetectedCard) != TRUE
Goto adaptersetup
Endif
;
; Get the detected parameters
;
CheckForMCA = +
Debug-Output "At CheckForMCA"
StartWait
;
; Check to see if were on a MicroChannel Machine
;
Shell $(UtilityInf), MCAFindBus, $(EE16_1BYTE), $(EE16_2BYTE)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADIN.INF: Failed Return from MCAFindBus."
goto CheckForISA
endif
ifstr $($R0) != "NO_ERROR"
Debug-Output "OEMNADIN.INF: Failed Return from MCAFindBus."
goto CheckForISA
endif
ifstr(i) $($R1) == {}
set Error = $(CANNOT_FIND_ANY_CARD)
set CommonStatus = USER_CANCEL
set from = "end"
goto nonfatal
endif
set AdapterList = $($R1)
goto skipoptions
CheckForISA = +
Debug-Output "At CheckForISA"
Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
EndWait
Ifstr(i) $($R0) != STATUS_SUCCESSFUL
Goto adaptersetup
Endif
;
; Merge the detected values in.
;
Set DetectedParams = $($R1)
Debug-Output "OEMNADIN.INF: Calling Param_SetDefaults to merge detected params"
Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
;
; End Netcard Detection logic
;===================================================
goto adaptersetup
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
; Get the current values of all the parameters
;
configureadapter = +
Debug-Output "At configureadapter"
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
;
; Get the other parameters; they're attached to the service parameters key
;
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
;
; We don't need the services key, so close it.
;
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
;
; Get the old values
;
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValue = $(ValueData)
Debug-Output "OEMNADIN.INF: Registry IRQ: "$(IRQValue)
else-ifstr(i) $(ValueName) == "IoBaseAddress"
set IOAddrValue = $(ValueData)
Debug-Output "OEMNADIN.INF: Registry IOAddr: "$(IOAddrValue)
else-ifstr(i) $(ValueName) == "IoChannelReady"
set IOReadyValue = $(ValueData)
Debug-Output "OEMNADIN.INF: Registry IOChannelReady: "$(IOReadyValue)
else-ifstr(i) $(ValueName) == "Transceiver"
set TransceiverValue = $(ValueData)
Debug-Output "OEMNADIN.INF: Registry Transceiver: "$(TransceiverValue)
endif
EndForListDo
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQList), 1)
Debug-Output "OEMNADIN.INF: Setting Default IRQ"
endif
ifstr(i) $(IOAddrValue) == ""
set IOAddrValue = *($(IOAddrList), 1)
Debug-Output "OEMNADIN.INF: Setting Default IOAddress"
endif
ifstr(i) $(IOReadyValue) == ""
set IOReadyValue = *($(IOReadyList), 2)
Debug-Output "OEMNADIN.INF: Setting Default IOChannelReady"
endif
ifstr(i) $(TransceiverValue) == ""
set TransceiverValue = *($(TransceiverList), 3)
Debug-Output "OEMNADIN.INF: Setting Default Transceiver"
endif
set IOAddrValue = *($(IOAddrList), ~($(IOAddrValues),$(IOAddrValue)))
set IRQValue = *($(IRQList), ~($(IRQList),$(IRQValue)))
set IOReadyValue = *($(IOReadyList), $(IOReadyValue))
set TransceiverValue = *($(TransceiverList), $(TransceiverValue))
;
; Put up the adapter configuration dialog if necessary.
;
adaptersetup = +
Debug-Output "At adaptersetup"
Shell "" DebugConfiguration "before displaying dialog"
; set IOAddrValue = *($(IOAddrList), ~($(IOAddrValues),$(IOAddrValue)))
; set IRQValue = *($(IRQList), ~($(IRQList),$(IRQValue)))
; set IOReadyValue = *($(IOReadyList), $(IOReadyValue))
; set TransceiverValue = *($(TransceiverList), $(TransceiverValue))
;
Shell "" DebugConfiguration "After List Translation"
;===================================================
; Netcard Detection logic
;
; Check that this card's parameters can be
; fully detected.
;
Shell $(ParamInf) Param_ParameterConfidence
Ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "OEMNADIN.INF: parameter confidence too low to bypass configuration"
Goto adapteroptions
Endif
;
; If this is a detected card and we're in EXPRESS mode,
; see if the parameters as they currently exist are
; verifiably correct.
;
Ifstr(i) $(DetectedCard) == TRUE
Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
Goto adapterverify
Endif
Endif
;
; End Netcard Detection logic
;===================================================
adapteroptions = +
Debug-Output "At adapteroptions"
Set from = adapteroptions
; set IOBaseAddrValue = *($(IOAddrList), ~($(IOAddrList),$(IOBaseAddrValue)))
; set IOReadyValue = *($(IOReadyList), $(IOReady))
; set TransceiverValue = *($(TransceiverList), $(Transceiver))
read-syms FileDependentDlg$(!STF_LANGUAGE)
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
Set IRQValue = $(Combo1Out)
Set IOAddrValue = $(Combo2Out)
Set IOReadyValue = ~($(IOReadyList),$(Combo3Out))
Set TransceiverValue = ~($(TransceiverList),$(Combo4Out))
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
Debug-Output "Action: unknown. Bye."
ui pop 1
goto end
endif
adapterverify = +
Debug-Output "At adapterverify"
Shell "" DebugConfiguration "after running dialog"
;===================================================
; Netcard Detection logic
;
; If this is a detected card, attempt to validate the options
;
Ifstr(i) $(DetectedCard) != TRUE
Goto skipoptions
Endif
Debug-Output "OEMNADIN.INF: Calling Param_VerifyCard"
Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
Ifstr(i) $($R0) == STATUS_SUCCESSFUL
Debug-Output "OEMNADIN.INF: Param_VerifyCard succeeded"
Goto skipoptions
Endif
;
; Give the user a chance to retry or force the options given.
;
Set from = adapteroptions
Set to = skipoptions
Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto Warning
;
; End Netcard Detection logic
;===================================================
;
; If installing, go create the necessary keys;
; if configuring, they're already open.
;
skipoptions =+
Debug-Output "At skipoptions"
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
;
; Add Software Component
;
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Debug-Output "At AddSoftwareComponent"
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
;
; At this point:
; $R1 contains the product version key handle;
; $R2 contains the NetRules subkey handle;
; $R3 contains the new Services key handle; and
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
;
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Debug-Output "At AddValueList - SoftwareType"
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "At AddValueList - bindform"
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
;
; Create the HARDWARE\Netcard region and its corresponding service
;
Debug-Output "At AddHardwareComponent"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
;
; At this point:
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
;
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Debug-Output "At AddValueList - Manufacturer"
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "At AddValueList - class"
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
;
; REQUIRED: $(KeyParameters) contains service Parameters key handle
;
writeparameters = +
Debug-Output "At writeparameters"
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
;
; Add the rest of the parameters to the Services area
;
Ifstr(i) $(MachineType) == "MCA"
set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{McaPosId,$(NoTitle),$(!REG_VT_DWORD),$(NETCARD_ID)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1}}
else
Set IOAddrValue = *($(IOAddrValues), ~($(IOAddrList),$(IOAddrValue)))
Shell "" DebugConfiguration "Before Writing Parameters"
set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{IoChannelReady,$(NoTitle),$(!REG_VT_DWORD),$(IOReadyValue)},+
{Transceiver,$(NoTitle),$(!REG_VT_DWORD),$(TransceiverValue)},+
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOAddrValue)}}
endif
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
Debug-Output "At bindingadapter"
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
Debug-Output "At removeadapter"
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
Debug-Output "At UpgradeSoftware"
;
; First determine whether we want to do upgrade or update for software
; or hardware component. Then we will determine whether the Mode is
; update or upgrade.
;
; If the same version of the product existed in the registry, we do
; update. Otherwise, we will do a upgrade
;
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Upgrade software component
;
; see whether the same version exist or not
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
;
; Update the binaries
;
Split-String $(!NTN_Infname), "\", FilenameList
QueryListSize ListSize $(FilenameList)
set !UG_Filename = *($(FilenameList), $(ListSize))
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
; Upgrade the version number
;
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
;
; do nothing for update
;
ifint $(Version) != $(ProductVersion)
;
; If the major version number is not the same,
; it is major upgrade. So let Upgrade the product
;
;
; make other upgrade change if necessary
;
endif
CloseRegKey $(KeyProduct)
else
;
; Cannot Open software key, goto ERROR
;
goto fatalregistry
endif
else
;
; upgrade/update hardware component
; There is no different between upgrade and update for hardware
; component
;
; 1. Get the Service Name
; 2. Change the NetRule section if necessary
;
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
;
; Get Service name
;
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
;
; Change the NetRule if necessary
;
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
;
; Make the change....
;
else
;
; Error, cannot open net rules key
;
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
endif
;
; 3. Change the service section of the hardware. i.e.,
; ParameterName change, value change, etc.
;
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
;
; Get the ServiceKey to change the Start value
; or Type value. Or open Parameters key to
; change the hardware parameters if necessary.
;
CloseRegKey $(ServiceKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
endif
endif
goto end
;
; End of Upgrade Software
;
;
; Escape hatches
;
successful = +
Debug-Output "At successful"
goto end
abandon = +
Debug-Output "At abandon"
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;
; warning display
;
warning = +
Debug-Output "At warning"
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
;
; non fatal error display
;
nonfatalinfo = +
Debug-Output "At nonfatalinfo"
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Debug-Output "At nonfatal"
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
Debug-Output "At nonfatalmsg"
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
;
; Registry is broken
;
fatalregistry = +
Debug-Output "At fatalregistry"
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
;
; Netcard detection failure
;
fataldetect = +
Debug-Output "At fataldetect"
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
;
; fatal error display
;
fatal = +
Debug-Output "At fatal"
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
;
; Shelling error
;
ShellCodeError = +
Debug-Output "At ShellCodeError"
set DlgType = "MessageBox"
set STF_MB_TITLE = "Error: "$(FunctionTitle)
set STF_MB_TEXT = "Shell Code Error"
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
Debug-Output "At setfailed"
set CommonStatus = STATUS_FAILED
;
; if OEM_ABANDON_ON == TRUE, then remove the registry entries
;
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
Debug-Output "At end"
goto term
term = +
Debug-Output "At term"
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "OEMNADIN.INF"
Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
Debug-Output $(InfName)" IRQValue is "$(!p:IRQValue)
Debug-Output $(InfName)" IOAddrValue is "$(!p:IOAddrValue)
Debug-Output $(InfName)" IOReadyValue is "$(!p:IOReadyValue)
Debug-Output $(InfName)" TransceiverValue is "$(!p:TransceiverValue)
return
;***************************************************************
; INSTALL SECTIONS
;***************************************************************
[Install-Option]
Debug-Output "At Install-Option"
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
;
; Add the files to the copy list
;
; BUGBUG: eliminate the "nt2" in the next line when Sunil fixes
; the other INF files
;
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
;
; Copy files in the copy list
;
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
Debug-Output "At Install-Update"
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;set STF_VERSION = "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit