Please read PPP howto if you have any problems or DOSPPPD documentation if you are advanced user. If you need to enter more information than this simple setup screen allows (eg. gateway, netmask, mtu, etc.), try external dialer setup screen or edit configuration files manualy.
PAP/CHAP username: PAP/CHAP password: If your provider doesn't require authentication, just ignore these values. Ethernet card emulation (sometimes required to run external TELNET and FTP)	IP Address: Fixed address Dynamicaly assigned address Nameservers: 1st 2nd (optional)

Basic communication setup: COM1 COM2 COM3 COM4 IRQ 3 (COM2,COM4) IRQ 4 (COM1,COM3) IRQ 5 (sometimes COM3,COM4) IRQ 7 (almost unused) < 9600 bps < 19200 bps < 38400 bps < 115200 bps Advanced communication setup: special base address: (0x???) use default base address for selected COM port (1...0x3f8, 2...0x2f8, 3...0x3e8, 4...0x2e8) Data transfer mode: (databits/parity/stopbits) Modem init string: (try ATZ,AT&F,AT&F0...) Dialing method: Tone dial (ATDT) Pulse dial (ATDP) Czech Telecom (ATX3DP)

Phone number: Terminal window: Show terminal window Autologin: Try following dialogue Wait for: Reponse: Wait for: Reponse: Wait for: Reponse: Wait for: Reponse: Wait for: Reponse: Wait for: Reponse: