The Columbia Crown The Kermit Project | Columbia University
612 West 115th Street, New York NY 10025 USA • kermit@columbia.edu
…since 1981

C - K e r m i t   9 . 0

Portable Scriptable Network and Serial Communication Software for Unix and VMS

The Broadway Local
The Broadway Local. Next stop: Columbia University. Photo courtesy   David Pirmann,   http://www.nycsubway.org/.

Version: 9.0.300
Released:   30 June 2011

DOWNLOAD TUTORIAL  SPECS    FAQ   BINARIES REVIEWS SCRIPTS

User Guide, Using C-Kermit, 2nd Edition (Digital Press). Click image to order from Amazon.com. CLICK HERE for reviews. CLICK HERE for more information.

Trouble or problems with C-Kermit? LOOK HERE and (for Linux) HERE.
This page last updated: Tue Jun 21 07:45:40 2011   

C-Kermit is a combined network and serial communication software package offering a consistent, transport-independent, cross-platform approach to connection establishment, terminal sessions, file transfer, file management, character-set translation, numeric and alphanumeric paging, and automation of file transfer and management, dialogs, and communication tasks through its built-in scripting language. C-Kermit includes:

And lots more -- CLICK HERE for specifications.

C-Kermit 9.0 is available for practically every known variation and version of Unix, past and present, on every 32- or 64-bit architecture, and for DEC / Compaq / HP VMS / OpenVMS on VAX, Alpha, and IA64 / IPF. Earlier releases of C-Kermit remain available for other platforms and operating systems:

In Unix, C-Kermit can be thought of as a user-friendly and powerful alternative to cu, tip, minicom, uucp, ftp, ftpd, telnet, ktelnet, rlogin, ssh, find, grep, iconv, recode, expect, wget, sendpage, bc, and to some extent even Lisp, your shell, and/or Perl; a single package for both network and serial communications, offering automation, helpfulness, and language features not found in most of the other packages, and with most of the same features available on all its non-Unix platforms (such as VMS), as well as in Kermit 95 on Windows 9x/ME/NT/2000/XP/Vista.

Also see:

LICENSING

[ Top ] [ Documentation ] [ New Features ] [ Case Studies ] [ Download ]

As of version 9.0, C-Kermit has an Open Source license, the Revised 3-Clause BSD License. Everybody can use it as they wish for any purpose, including redistribution and resale. It may be included with any operating system where it works or can be made to work, including both free and commercial versions of Unix and Hewlett-Packard (formerly DEC) VMS (OpenVMS). Technical support will be available from Columbia University only through 30 June 2011.

C-Kermit 8.0 and 7.0 have a more restrictive license, CLICK HERE to see it.

[ Top ] [ Download ] [ Binaries ] [ Kermit Home ]

DOCUMENTATION

[ Google ] [ Top ] [ License ] [ New Features ] [ Case Studies ] [ Download ]

The user manual for C-Kermit 8.0 is (still) the book Using C-Kermit, Second Edition [ INFO ], which is current with C-Kermit 6.0. Features new subsequent C-Kermit releases in the supplements (see links just below).

If you don't have the manual, please order it. It explains step-by-step, with examples and sometimes pictures, how to use C-Kermit: how to make connections, how to troubleshoot connection and file-transfer problems, how to handle character-set translation, how to write script programs, and lots more; especially useful since live Kermit software support is no longer available from Columbia University after 30 June 2011. Beginning in 2011, the manual is also available as a Kindle E-Book.

Online Information Resources:

If there is sufficient demand, an updated edition of the manual can be produced for C-Kermit 9.0.

[ Top ] [ Kermit Home ]

DOWNLOAD

[ Top ] [ License ] [ Documentation ] [ New Features ] [ Case Studies ]

You have many choices for downloading:

You can also order the C-Kermit 8.0 CDROM, described HERE.

Install packages and prebuilt binaries (including those on the CDROM) do NOT include C-Kermit's security features, due to USA export law. To obtain a version of C-Kermit that includes Kerberos, SSL, TLS, or SRP, you must download the source code and build it yourself. Address complaints to the US Department of Commerce.

C-Kermit 9.0 Install Packages

[ Source Code ] [ Individual Binaries ]

Install packages are contributed by Linux distributors, OS vendors, user groups, or users (we don't make them ourselves). The following install packages are presently available for C-Kermit 8.0 and 9.0.

Debian Linux 6.0 ("Squeeze") C-Kermit 8.0.211 Package Collection
Packages for amd64, armel, i386, ia64, mips, mipsel, powerpc, s390, and sparc (offsite):
http://packages.debian.org/squeeze/ckermit.

Sharp Zaurus C-Kermit 8.0.206 ipkg installer (onsite):
ftp://kermit.columbia.edu/kermit/archives/kermit-8.0.206-arm.ipk

CLICK HERE for a general discussion of C-Kermit package making. NOTE HOWEVER that the Unix version of C-Kermit 8.0 includes its own new installation procedure, built into the makefile. See Section 5 of the Unix C-Kermit installation guide.

[ Top ] [ Kermit Home ]

Download and Build from Source Code

[ Top ] [ Unix Build ] [ VMS Build ]

You can download C-Kermit 8.0 source and text files directly from the Kermit Project in any of several archive formats by clicking on the following FTP links. The complete archives contain source code, build procedure, license, initialization files, CA certificates, manual page or help topic, initialization files, and plain-text information files extracted from the Web pages listed in the Documentation section: a complete distribution. The text archives contain everything but the source code; these can used when you download a prebuilt binary. The size of each archive file in megabytes is shown in each cell.

Archive Zip Tar Tar.Z Tar.gz
Unix Complete  2.9 cku300.zip 11.7 cku300.tar  4.1 cku300.tar.Z  2.9 cku300.tar.gz
Unix Text Only  0.8 cku300txt.zip  2.7 cku300txt.tar  1.0 cku300txt.tar.Z  0.8 cku300txt.tar.gz
VMS Complete  2.8 ckv300.zip      
VMS Text Only  0.6 ckv300txt.zip      

(Zip archives contain only text files, unzip them with "-a" or "-aa".)

Besides those, we also have C-Kermit 7.0 archives for the following platforms that have not been updated to C-Kermit 8.0:

ckl197.zip
Source code and text files for Stratus VOS, ZIP archive (text files in DOS format) (Version 7.0).
ck9197.zip
Source code and text files for Microware OS-9/68k, ZIP archive (text files in DOS format). (Version 7.0).

If you want to monitor the day-to-day progress of C-Kermit development, you can find the current working source code HERE.

Source code and text files are also available separately in the kermit/f/ directory. These include files for platforms other than Unix and VMS, such as Stratus VOS, Data General AOS/VS, OS-9, the Amiga, etc. All files in this directory are text files; transfer them in text mode. See the ckaaaa.txt file for details. NOTE: The Unix and VMS source files are at 8.0 level. The VOS, Amiga, OS-9, and AOS/VS versions remain at 7.0 level. Others (Macintosh, Atari ST) have not yet been updated in a long while due to lack or programmers and/or platforms; volunteers welcome. And of course anybody interested in porting C-Kermit to new platforms is more than welcome to contact us about it; we'll be happy to get you started.

[ Top ] [ Hints & Tips ] [ Kermit Home ]

Unix Build Instructions

[ Top ] [ Unix Hints & Tips ] [ Unix Installation Instructions ]

  1. Make a fresh directory and 'cd' to it. Example:

      $ mkdir kermit
      $ cd kermit
    

  2. Download the appropriate source code archive.

  3. If you downloaded a compressed tar file, uncompress it. Examples:

      $ gunzip cku300.tar.gz
      $ uncompress cku300.tar.Z
    

  4. If you downloaded a tar archive, "un-tar" it. Example:

      $ tar xvf cku300.tar
    

    If you downloaded a Zip archive, unzip it. Example:

      $ unzip -a cku300.zip
    

  5. Now you can delete the tar archive (or zip archive) if you wish:

      $ rm cku300.tar                 (or rm cku300.zip)
    

  6. Read the comments at the top of the makefile to find out which target is appropriate for your computer and operating system, and then give the appropriate "make" command. Examples:

      $ make linux                    (Linux, almost any version)
      $ make macosx                   (Mac OS X 10.3.x or later)
      $ make freebsd                  (FreeBSD, any version)
      $ make openbsd                  (OpenBSD, any version)
      $ make netbsd                   (NetBSD, any version)
      $ make aix                      (IBM AIX)
      $ make aixg                     (IBM AIX with gcc)
      $ make solaris10                (Sun Solaris 10 with cc)
      $ make solaris10g               (Sun Solaris 10 with gcc)
      $ make irix63                   (SGI IRIX 6.3)
    

  7. Quick install: move the resulting 'wermit' binary to /usr/local/bin/kermit and give it the same owner, group, and permissions as minicom or cu. Move the ckuker.nr to the appropriate man page directory and rename it as appropriate, e.g. to kermit.1. For more detailed instructions, read the C-Kermit installation instructions, especially if you had trouble with any of these steps, or if you will be using C-Kermit to dial out. The most convenient way to install is to the use makefile's install target ("make install"); read about it HERE. See the configuration options guide for information about compile-time options for customizing the feature set.

You can also download individual Unix binaries from the C-Kermit binaries table, but to avoid library or other version mismatches, it is better to build from source code if you can.

[ Top ] [ Hints & Tips ] [ Kermit Home ]

VMS Build Instructions

[ Top ] [ VMS Hints & Tips ] [ VMS Installation Instructions ]

If you want to install a prebuilt VMS binary, then fetch the most appropriate VMS binary from the C-Kermit binaries table. Pick a VAX binary for a VAX or an Alpha binary for an Alpha. The VMS version number for the binary must be less than or equal to your VMS version. If you want to make TCP/IP connections, pick the binary for the appropriate TCP/IP product (TGV Multinet, DEC UCX, Process Software TCPware, etc), again with a version number less than or equal to yours; if none can be found, then try a UCX version (since most non-DEC TCP products include built-in UCX emulation). If you downloaded a prebuilt binary, also download the VMS C-Kermit text-file archive. Then read the installation instructions for VMS.

If you want to build from source code, fetch the VMS complete archive above if you have VMS-based unpacking tools, otherwise get the source files and text individually as described just below. NOTE: Unzip the Zip file with "unzip -a".

  1. Make a fresh directory and SET DEFAULT to it. Example:

      $ create/directory kermit
      $ set default [.kermit]
    

  2. Download the VMS source code Zip archive.

  3. Unpack the Zip archive. Example:

      $ unzip -a ckv300.zip
    

  4. Run the build procedure:

      $ @ckvker
    

    If you have a pre-5.0 VMS release, use the "old" build procedure:

      $ @ckvold
    

    If you experience any trouble, read the comments at the top of the build procedure.

  5. This makes a WERMIT.EXE file in your current directory. Start it with:

     $ r wermit
    

  6. To install the version of Kermit you have just built, read the installation instructions.

[ Top ] [ Hints & Tips ] [ Kermit Home ]

Individual Binaries

[ Top ] [ Binaries Table ] [ C-Kermit Installation Instructions ]

The C-Kermit binaries table is HERE. Before visiting the table, you should read this section.

When you download a prebuilt-Kermit binary, you should also download the C-Kermit text files, unpack them if necessary, and install them as desired. NOTE: In Unix, you can still use "make install", even if if you did not use the makefile to build your Kermit binary (the makefile as well as all the text files you need are in the text archive).

In the binaries table, filenames start with "ck" for C-Kermit, then one letter or digit to indicate the platform ("u" for Unix, "d" for Data General AOS/VS, "v" for VMS, "i" for Amiga, "9" OS-9, "p" for Plan 9, etc). After that comes a three-digit edit number:

188: Version 5A(188), November 1992 through September 1993.
189: Version 5A(189), September 1993 through October 1994.
190: Version 5A(190), October 1994 through September 1996.
192: Version 6.0.192, September 1996 through December 1999.
193: Version 6.1.193, November 1996 through June 1998.
194: Version 6.1.194, June 1998 through December 1998.
195: Version 7.0.195, January 1999 through August 1999.
196: Version 7.0.196, September 1999 through final release 1 Jan 2000.
197: Version 7.0.197, January-February 2000.
200: Version 8.0.200, December 2001.
201: Version 8.0.201, February 2002.
206: Version 8.0.206, October 2002.
208: Version 8.0.208, 14 March 2003.
209: Version 8.0.209, 17 March 2003.
211: Version 8.0.211, 10 April 2004. 300: Version 9.0.300, 30 June 2011.
Then a possible test-version designator: "a" for Alpha or "b" for Beta, followed by the 2-digit test number. Examples:

  cku209.xxx        C-Kermit 8.0.209 final release
  cku200b04.xxx     C-Kermit 8.0.200 Beta.04
  cku197.xxx        C-Kermit 7.0.197 final release

Test versions are included here only for platforms that do not have a final build available (usually because the machine disappeared or had an OS upgrade before the final C-Kermit release).

Note that edits 193, 194, 195, 198, 199, 202-05, and 212-299 were never formally released (191 was only for OS/2).

The rest of the name is platform-dependent; in Unix it's the name of the makefile target, optionally followed by specific hardware platform and/or OS version, when it makes a difference. In VMS it's the platform ("axp" (i.e. Alpha) or "vax"), then the VMS version number (e.g. "vms73"), and then TCP/IP product and version number (or "nonet" if TCP/IP support is not built in). And so on. VMS TCP/IP product codes are as follows:

  ucx  DEC / Compaq / HP TCP/IP
  tgv  TGV MultiNet
  pst  Process Software TCPware
  twg  The Wollongong Group WIN/TCP or PathWay
  cmu  Carnegie-Mellon University CMU/IP

REMEMBER: It's often better to build your own binary than to run a prebuilt one, due to the ever-increasing likelihood of OS and/or library version mismatch.

After downloading, rename to "kermit" or "kermit.exe" (etc), as appropriate for your operating system and, if necessary, give execute permission, e.g. (in Unix):

  $ mv cku300.linux-i386-rhel5 kermit
  $ chmod +x kermit

Also remember that before C-Kermit can be used to dial out from Unix, it will probably also be necessary to give the Kermit executable a certain owner and group, and to set it suid and/or sgid bits, to allow it access to the dialout device and/or lockfile directory (the same as any other dialout software, such as cu or minicom). Read Sections 10 and 11 of the Unix C-Kermit installation guide.

Notes on the Binaries:

  1. "curses" refers to the fullscreen file-transfer display, used when transferring files over dialout or network connections. It's nice but it adds size and sometimes causes problems so if a "curses" version gives you trouble, try a no-curses (NC) version. On platforms that have a choice between "traditional curses" and "new curses" (ncurses), you might also have a choice of binaries -- if one doesn't work, try the other.

  2. Likewise, some binaries come in TCP/IP and non-TCP/IP versions. If you don't need to make TCP/IP connections with C-Kermit, choose the non-TCP/IP version (if available). A TCP/IP-enabled binary might not run on platforms that don't have TCP/IP installed.

  3. And some binaries come in optimized and non-optimized versions; this refers to compile-time optimization. Choose the optimized version, but if it gives you trouble, try the corresponding non-optimized one, if available (some optimizers have bugs). When optimization is marked in the table, O means normal optimization, O- means no optimization, O+ means extra optimization.

  4. Some binaries are available in gcc and non-gcc versions; that is, versions built using two different compilers. If one gives you trouble, try the other if available. Some compilers have bugs; some compilers support features that other ones don't.

  5. Some HP-UX binaries (notably, the HP-UX 7.00 ones) are built for long filename (255 chars) file systems, others for short-filename (14 chars) systems; these are marked with SF and LF. Choose one that is appropriate for your file system.

  6. Some Linux binaries are linked with libc, some with glibc. Pick the one that is appropriate for your Linux system. Better yet, just build from source ("make linux" should work on any Linux system).

If you are able to make a binary not listed table
(or that is listed, but is not current"), please contribute it to the archive.

CLICK HERE to visit the C-Kermit binaries table.

Questions? Comments? -- Send e-mail.

KERMIT PROTOCOL : SECURE : SCRIPTABLE : TELNET : FTP : UNIX : VMS : LINUX : BSD : MAC OS X : SOLARIS : AIX : HP-UX : TRU64 : SCO : QNX : IRIX : UNICODE : KERBEROS : SSL : TLS : SRP : FTP SCRIPT : FILE TRANSFER : MODEM : DIAL : PAGER

[ Top ] [ Kermit Home ]


C-Kermit 8.0 / Columbia University / kermit@columbia.edu