This manual page is for Mac OS X version 10.6.3

Reading manual pages

NTPTRACE(8)                              BSD System Manager's Manual                             NTPTRACE(8)

NAME
     ntptrace -- trace a chain of NTP servers back to the primary source

SYNOPSIS
     ntptrace [-vdn] [-r retries] [-t timeout] [server]

DESCRIPTION
     The ntptrace utility determines where a given Network Time Protocol (NTP) server gets its time from,
     and follows the chain of NTP servers back to their master time source.  If given no arguments, it
     starts with ``localhost''.

     Here is an example of the output from ntptrace:

     % ntptrace
     localhost: stratum 4, offset 0.0019529, synch distance 0.144135
     server2ozo.com: stratum 2, offset 0.0124263, synch distance 0.115784
     usndh.edu: stratum 1, offset 0.0019298, synch distance 0.011993, refid 'WWVB'

     On each line, the fields are (left to right): the host name, the host stratum, the time offset between
     that host and the local host (as measured by ntptrace; this is why it is not always zero for
     ``localhost''), the host synchronization distance, and (only for stratum-1 servers) the reference clock
     ID.  All times are given in seconds.  Note that the stratum is the server hop count to the primary
     source, while the synchronization distance is the estimated error relative to the primary source.
     These terms are precisely defined in RFC 1305.

     The following options are available:

     -d      Turn on some debugging output.

     -n      Turn off the printing of host names; instead, host IP addresses are given.  This may be neces-sary necessary
             sary if a nameserver is down.

     -r retries
             Set the number of retransmission attempts for each host; the default is 5.

     -t timeout
             Set the retransmission timeout (in seconds); the default is 2.

     -v      Print verbose information about the NTP servers.

SEE ALSO
     ntpd(8), ntpdc(8)

     D L Mills, Network Time Protocol (Version 3), RFC1305.

BUGS
     This program makes no attempt to improve accuracy by doing multiple samples.

BSD                                            January 6, 2000                                           BSD