Voir le sujet pr�c�dent :: Voir le sujet suivant |
Auteur |
Message |
toinet
Inscrit le: 15 Juin 2007 Messages: 326 Localisation: Paris, France
|
Post� le: Mer 05 D�c 2007, 11:49 Sujet du message: Ricochet (Mind Toys, 1982) |
|
|
Play a game of ricochet against a human or the computer. Difficult game!
PROTECTION TYPE
It is a non-standard 16-sector disk. A DOS 3.3 disk with change of data markers depending on the filename... just like Elite. Refer to that thread for more info even though that thread's next messages are more documented.
Just like Elite, the RWTS data read routine is slightly modified. You can read D5AAAD with the standard routine but reading of D5AAxx sectors imply a change of the decoding routine.
I believe I will update my crack of Elite with the method used here.
DISK COPY
Step 1
Boot a DOS 3.3 master disk
Put a blank disk in drive 2
Type INIT HELLO,D2
Leave the disk in drive 2
Step 2
Launch Advanced Demuffin
Press P to bypass boot
Go to the monitor
Move the code of the third message in that thread to $B700
- B8DC: 4C 00 B7
Return to Advanced Demuffin (press control-y)
Copy tracks 3 to $22 onto drive 2
Reboot and... enjoy,
Toinet
Derni�re �dition par toinet le Mer 05 D�c 2007, 11:53; �dit� 1 fois |
|
Revenir en haut de page |
|
![](templates/subSilver/images/spacer.gif) |
toinet
Inscrit le: 15 Juin 2007 Messages: 326 Localisation: Paris, France
|
Post� le: Mer 05 D�c 2007, 11:51 Sujet du message: |
|
|
The following code is the original data read routine. The interesting part is located at $B8AF.
Location $31 contains the third marker to be read. If its value is $AD, we read a sector normally, otherwise we go to $B8BE.
Code: |
*
* Ricochet
* (c) 1982, Mind Toys
*
* (k) 2007, LoGo
*
mx %11
org $B895
lst off
*
*
*
LB895 LDY #$20
LB897 DEY
BEQ LB90C
LB89A LDA $C08C,X
BPL LB89A
LB89F EOR #$D5
BNE LB897
NOP
LB8A4 LDA $C08C,X
BPL LB8A4
CMP #$AA
BNE LB89F
PHA
PLA
LB8AF LDA $C08C,X
BPL LB8AF
CMP $31
BNE LB89F
EOR #$AD
BEQ LB8C7
BNE LB8BE
LB8BE LDY $C08C,X ; Extra nibble if D5AAxx
BPL LB8BE
LDA $BB00,Y
DB $2C ; The opcode for BIT $xxxx
LB8C7 LDA #$00 ; Normal reading if D5AAAD
LDY #$56
LB8CB DEY
STY $26
LB8CE LDY $C08C,X
BPL LB8CE
EOR $BB00,Y
LDY $26
STA $BD00,Y
BNE LB8CB
LB8DD STY $26
LB8DF LDY $C08C,X
BPL LB8DF
EOR $BB00,Y
LDY $26
STA $BC00,Y
INY
BNE LB8DD
LB8EF LDY $C08C,X
BPL LB8EF
CMP $BB00,Y
BNE LB90C
LB8F9 LDA $C08C,X
BPL LB8F9
CMP #$DE
BNE LB90C
NOP
LB903 LDA $C08C,X
BPL LB903
CMP #$AA
BEQ LB90E
LB90C SEC
RTS
LB90E CLC
RTS
|
|
|
Revenir en haut de page |
|
![](templates/subSilver/images/spacer.gif) |
toinet
Inscrit le: 15 Juin 2007 Messages: 326 Localisation: Paris, France
|
Post� le: Mer 05 D�c 2007, 11:52 Sujet du message: |
|
|
And my modified code to use the standard DOS 3.3 tables addresses: $BA00 instead of $BB00, etc.
The change is at $B71A...
Code: |
*
* Ricochet
* (c) 1982, Mind Toys
*
* (k) 2007, LoGo
*
mx %11
org $B700
lst off
*
*
*
LB700 LDY #$20
LB702 DEY
BEQ LB777
LB705 LDA $C08C,X
BPL LB705
LB70A EOR #$D5
BNE LB702
NOP
LB70F LDA $C08C,X
BPL LB70F
CMP #$AA
BNE LB70A
PHA
PLA
LB71A LDA $C08C,X
BPL LB71A
CMP #$AD ; Rewrite comparison routine
BEQ LB732
NOP
NOP
NOP
NOP
NOP
NOP
LB729 LDY $C08C,X ; Extra nibble if D5AAxx
BPL LB729
LDA $BA00,Y
DB $2C
LB732 LDA #$00 ; Normal reading if D5AAAD
LDY #$56
LB736 DEY
STY $26
LB739 LDY $C08C,X
BPL LB739
EOR $BA00,Y ; The table addresses...
LDY $26
STA $BC00,Y ; ...have been corrected
BNE LB736
LB748 STY $26
LB74A LDY $C08C,X
BPL LB74A
EOR $BA00,Y
LDY $26
STA $BB00,Y
INY
BNE LB748
LB75A LDY $C08C,X
BPL LB75A
CMP $BA00,Y
BNE LB777
LB764 LDA $C08C,X
BPL LB764
CMP #$DE
BNE LB777
NOP
LB76E LDA $C08C,X
BPL LB76E
CMP #$AA
BEQ LB779
LB777 SEC
RTS
LB779 CLC
RTS
|
|
|
Revenir en haut de page |
|
![](templates/subSilver/images/spacer.gif) |
JPL Site Admin
Inscrit le: 12 Mar 2007 Messages: 160 Localisation: Issy les Moulineaux / PARIS
|
Post� le: Mer 12 D�c 2007, 14:11 Sujet du message: |
|
|
Je me demande ou tu trouves le temps de faire tout �a...
Tu sais que j'ai quelques caisses de softs qui t'attendent ![Cool](images/smiles/icon_cool.gif) |
|
Revenir en haut de page |
|
![](templates/subSilver/images/spacer.gif) |
toinet
Inscrit le: 15 Juin 2007 Messages: 326 Localisation: Paris, France
|
Post� le: Mer 12 D�c 2007, 18:31 Sujet du message: |
|
|
Le soir tard quand mon travail me le permet. C'est aussi une mani�re de se changer les id�es !
En fait, chaque crack (ou presque) apporte son lot de surprise(s) et d'int�r�ts nouveaux :
- le GALFO SYSTEM avec les Microprose dont j'ai fait le source et quelques commentaires,
- les FSTs avec lesquels je m'amuse de temps � autre pour faire un FST RDOS
Je m'inqui�te de la dispersion pour arriver � terminer un jour Wings of Fury par exemple ! Ce soir je devrais avoir termin� mon travail sur Outpost
Pour les caisses de softs, c'est gentil, je pense que je me pencherai sur Hold-Up, stp
toto |
|
Revenir en haut de page |
|
![](templates/subSilver/images/spacer.gif) |
JPL Site Admin
Inscrit le: 12 Mar 2007 Messages: 160 Localisation: Issy les Moulineaux / PARIS
|
Post� le: Jeu 13 D�c 2007, 19:54 Sujet du message: |
|
|
et SUNDOG ![Wink](images/smiles/icon_wink.gif) |
|
Revenir en haut de page |
|
![](templates/subSilver/images/spacer.gif) |
|