home *** CD-ROM | disk | FTP | other *** search
- CM TELECOM AR3800
-
- NOTES: This is a dual NAM unit.
- The ESN prefix is 153 decimal and 99 hex.
- This unit was only imported for a short time and is no longer
- supported in the USA.
- Several different software versions have been available and not
- every phone will follow these steps... Good Luck!
- Leave NAM 2 data at factory default If NAM 2 is not used.
-
- 1. Turn on power.
-
- 2. Lock phone by pressing FUNC 1, then 1 repeatedly until the phone
- displays F-LOCK, press SND.
-
- 3. Enter * 5 9 6 5, display will show "CONF 3800", if not try entering
- * 4 0 1 8 which is the master reset code.
-
- 4. Volume up and down keys step through the programing data. You may
- also directly access any step by pressing RCL NN, where NN is the
- step number. Some single digit options toggle by pressing STO (?).
-
- 5. Press SND to store each step.
-
- 6. Press END to complete programing and exit at any time.
-
- PROGRAMING DATA:
-
- STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
-
- 01 10 DIGITS MINA NAM 1 AREA CODE & PHONE NUMBER
- 02 00000 - 99999 SIDA NAM 1 SYSTEM ID
- 03 0333 OR 0334 IPCHA NAM 1 INITIAL PAGING CHANNEL
- 04 2 DIGITS ACOLCA NAM 1 ACCESS OVERLOAD CLASS
- 05 2 DIGITS GIMA NAM 1 GROUP ID (10 IN USA)
- 06 0 OR 1 L CTLA NAM 1 LOCAL USE MARK
- 07 0 - 4 MINA NAM 1 PREFERRED SYSTEM
- 0 = Prefer A
- 1 = Prefer B
- 2 = A only
- 3 = B only
- 4 = Home only
- 08 UNKNOWN (LOCK CODE?)
- 09 UNKNOWN
- 10 10 DIGITS MINB NAM 2 AREA CODE & PHONE NUMBER
- 11 00000 - 99999 SIDAB NAM 2 SYSTEM ID
- 12 0333 OR 0334 IPCHB NAM 2 INITIAL PAGING CHANNEL
- 13 2 DIGITS AOLCB NAM 2 ACCESS OVERLOAD CLASS
- 14 2 DIGITS GIMB NAM 2 GROUP ID (10 IN USA)
- 15 0 OR 1 L CTLB NAM 2 LOCAL USE MARK
- 16 0 - 4 MINB NAM 2 PREFERRED SYSTEM
- 0 = Prefer A
- 1 = Prefer B
- 2 = A only
- 3 = B only
- 4 = Home only
- 17 0 ONLY E ADDR LEAVE AT 0
- 18 0 OR 1 PWR SAVE AUTO POWER OFF OPTION
- 19 00000 - 99999 ISID INHIBIT SYSTEM ID
- 20 4 DIGITS PCAC PROGRAMING PASSWORD