home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.wwiv.com
/
ftp.wwiv.com.zip
/
ftp.wwiv.com
/
pub
/
DOOR
/
DRMSEZ10.ZIP
/
SYSOP.DOC
< prev
next >
Wrap
Text File
|
1995-04-30
|
7KB
|
189 lines
Simon Sez v1.0
Simon comes to YOUR BBS!
Copyright (c)1994-95 Andy Stewart
ALWAYS READ the file WHATS.NEW !!!!!!
COPYRIGHT AND REGISTRATION NOTICE
---------------------------------
Simon is a copyrighted program being distributed under the
shareware concept. The only 'difference' between DreamWARE doors
and shareware is: Registration is still required, but the trial
period for the door is virtually indefinate. You may test the door
online for as long as you like, and register it when you are sure
you want it to remain online, and when you can afford to register.
(I know how running a BBS can get to be a burden on your finances.)
This policy is retroactive to ALL DreamWARE doors and utilities, the
only exception being the Frontend program I, along with a friend,
will be releasing at a later date (No name yet). This will have the
normal set evaluation period for obvious reasons. At any rate, try
the door until you are absolutely sure you wish the door to remain
online and can afford to register it, then, at that moment you are
required to register the door! <g> Enjoy!
As a shareware program, Simon may be freely distributed through a
BBS. Shareware distributors may distribute copies of Simon on disk
for a modest disk duplication charge not to exceed $4 per disk.
WARRANTY
--------
Simon is distributed without warranty. In no event will Andy
Stewart or DreamWARE Communications be liable to you for damages,
including any loss of profits, lost savings, or other incidental or
consequential damages arising out of your use of or inability to use the
program, even if Andy Stewart, DreamWARE Communications or an authorized
representative has been advised of the possibility of such damages.
Andy Stewart and DreamWARE Communications will not be liable for any
such claim by any other party.
INTRODUCTION
------------
Simon has the following built-in features ...
Assembly language serial input/output routines for maximum
speed.
Fully supports high speed modems: 16550 FIFO buffering and
locked serial ports.
Built in ANSI terminal emulator. No need to have ANSI.SYS
loaded in memory.
Supports all of the most popular door data file formats:
TriBBS, PCBoard, GAP, Spitfire, WildCat, RBBS, and WWIV.
RUNNING Simon Sez
-----------------
Simon is run by entering a command similar to the following:
simon simon.cfg
In the above command line, "simon" is the name of your door's EXE file
and the "simon.cfg" parameter is the name of the door's configuration
file. The configuration file can have any name the sysop chooses, but
it must reside in the same directory as the door. The configuration
file is an ASCII text file with the following format:
Line 1: Door data file type.
Line 2: Path to the door data file(s).
Line 3: BBS name.
Line 4: Sysop's name.
Line 5: Locked baud rate.
As illustrated above, the door's data file type is specified in line 1
and can be PCB for PCBoard, GAP for GAP (DOOR.SYS, WildCat! v3.x-4.x),
SF for Spitfire, RBBS for RBBS, WC for WildCat! v2.x, TRIBBS for TriBBS,
or WWIV for WWIV/VBBS. The locked baud rate is specified in line 5. If
the sysop doesn't lock his serial port, he must specify 0 for the locked
baud rate.
NOTE: Although many door formats do pass the locked baud rate in the
door data files, some older formats such as RBBS do not. For
conformity, it is required that you specify the locked baud rate in
line 5 and ignores any value passed in the door data files.
The following is a sample door configuration file:
GAP
C:\WC\WCWORK\NODE1\
DreamNET
Andy Stewart
57600
A file called SETUP.EXE is included to aid with writing this config.
file. Run it, answer the questions, and let the program do the rest.
THIS MUST BE RUN BEFORE RUNNING Simon Sez!
Simon can be run locally without a door data file (handy for the
sysop to use the door without logging on to the BBS) by specifying
/L after the configuration file parameter in the DOS command line.
Simon will request the user to enter his name before running the
door.
Nonstandard IRQs can be used with Simon by specifying the IRQ
number after the "config" parameter in the command line used to run
the door as follows:
door config irq
SPECIAL KEYS
------------
While a door is running, the sysop can press certain special keys to
perform a variety of functions. The following is a list of the
functions that the Simon special keys perform:
Key(s) Function
HOME Toggles between the user status window and a help
display that lists the special keys.
F6 Takes 5 minutes away from the caller.
NOTE: This will NOT be returned to BBS.
F7 Gives 5 minutes to the caller.
NOTE: This will NOT be returned to the BBS.
F9 Quit the door and return the caller to the BBS.
F10 Enter chat mode. Pressing the ESC key exits the
chat mode.
Alt+D Drop to DOS.
SUPPORT
-------
Refer to DISTRIB.TXT for support sites.
REGISTRATION
------------
Registration of Simon is only $10.00. Please use the form in the
file ORDER.FRM. When you register Simon, you will receive a
keyfile to turn your copy of Simon into a registered version. More
information on this is in ORDER.FRM.
Thank you for using Simon Sez
-----------------------------