SPITFIRE will run only after you enter the name (your name)> that you want to appear as the SYSOP of your Bulletin Board.
SYSOP NAME:
All comments and messages left for the Sysop will be addressed> to the name you will enter now. It is imperative for you to: log on with this name in order to receive your messages.
SYSOP CALLER NAME: 2
The following requested information is required.U
Alter which [1..5]?
12345Q
Enter security:
Another? [Y/n] U
Enter: U
Enter FAX result message:
CONNECTU
Enter answer string: U
Enter Serial Port
Enter System Baud RateU
F=` u
Enter Off Hook String: U
Enter Pre-Init String: U
Enter Error Correction Message: U
Enter Ring Number>
Enter Delay Number
Enter base address (hex):
<I> Initialization String%<A> Answer String.................. :%<F> FAX Connection Result Msg...... :%<P> Pre-Initialization String...... :%<O> Off Hook String................ :%<S> Serial Port No................. :%<B> System Baud Rate............... :%<E> Error Correction Message....... :%<H> Hardware Data Flow Control..... :%<N> Number Of Rings................ :%<D> Display Result Messages........ :%<C> Disconnect Delay............... :%<U> Use High Speed Async Routines.. :%<R> Baud Rate Requirement.......... :%<L> Break Length..(1000=1 Second).. :
> Line COM
> Base COMU
SPITFIRE NODE
ASYNC CONFIGURATION
Enter Command or <Q>uit -
12345678SFBINEHADCURLPOQX
Enter IRQ
Enter Minimum Baud Rate
Enter Break LengthU
Enter Path: U
$<A> Work Files Path.............. :$<B> Message Files Path........... :$<C> Display Files Path........... :$<D> External Transfer Path....... :U
SPITFIRE FILE PATHS
ENTER COMMAND [<Q>... Quit]:
ABCDQ
#<A> US Phone Number Style........ :#<B> Log On - Message Statistics.. :#<C> Log On - New File Statistics. :#<D> Require New Caller Birthdate. :#<E> New Caller Default Protocol.. :#<F> File Description Conversion.. :#<G> Type Of BBS.................. :#<H> ANSI Graphics................ :#<I> Second Password.............. :#<J> Direct Screen Writes......... :#<K> Uploaded By Description...... :#<L> Password Failure Comment..... :#<M> Require Door Return Password. :#<N> Scan All Msg Conferences..... :#<O> Comprehensive Upload Search.. :#<P> Color Monitor................ :#<R> RIP Graphics................. :#<S> Search CD Rom Area SFFILES... :#<T> Test Files Upon Boot......... :#<U> Use International Characters. :U
Toggle SPITFIRE Switches
Private BBS
Public BBS
Ansi Available
No Ansi
Second Password Required
One Password
ENTER COMMAND [<Q>... Quit]:
ABCDEFGHIJKLMNOPQRSTU
Enter new name: U
Enter new password: U
Enter new startdate: U
Enter Upload Time Ratio: U
Enter drive letter:
#<A> Sysop Caller Name............ :#<B> Sysop Name................... :#<C> Drop To DOS Password......... :#<D> BBS Starting Date............ :#<E> Daily Time Limit............. :#<F> Log On Time Limit............ :#<G> Maximum Callers In Database.. :#<H> Maximum Caller Daily Access.. :#<I> # Of Callers................. :#<J> # Of File Description Lines.. :E<K> Upload Time Compensation..... : <1> Expired Security...:E<L> New Caller Security.......... : <2> Expiration warning.:E<M> New Caller Log On Time....... : <3> Sysop Security.....:E<N> No Activity Time Limit....... : <4> Node Chat Drive....:#<O> Node Number.................. :#<P> Private BBS Security Level... :#<R> Total Number Of Nodes........ :#<S> U/D Ratio Violation Security. :#<T> Upload Disk Space Requirement :U
SPITFIRE CONFIGURATION
ENTER COMMAND [<Q>... Quit]:
ABCDEFGHIJKLMNOPQRST1234
Enter Time Limit
Enter Number Of Users
Enter Call Limit
Enter Caller Number-Enter Amount Of File Description Lines [1..4]
Enter New Security
Enter Time Limit [3..9]
Enter Node Number
Enter Private BBS Security
Enter Total Number Of Nodes"Enter U/D Ratio Violation Security#Enter Upload Disk Space Requirement
Enter Security
Enter Number Of Days
~<2u:
Enter Description: U
Enter Security: U
Enter upload path: U
Enter download path: U
Enter area number to update:
There is no such area.U
Untitled File AreaU
SFFAREA.DAT
SFFAREA.$$$U
Delete which area? U
Insert before which area? U
Download Path..... :
Upload Path....... :
Area Description.. : "
Area Access....... :
Equal To Caller Security(Equal To Or Greater Than Caller Security
Area Security..... :
No Charge (FREE) Area.. :
Preview Area...... :
Privileged Securities.. :
CD Rom Area....... :
Search File Area.. :
>>>> RECORD [
] FILE SYSTEM RECORD MENU <<<<C<F>......... Area Description <U>.............. Upload PathC<D>............ Download Path <S>............ Area SecurityC<@>.............. Area Access <R>............ Record NumberC<A>............. Add New Area <I>.......... Insert New AreaC<P>............... Purge Area <T>...... Toggle Preview AreaC<+>................ Next Area <->............ Previous AreaC<C>.............. CD Rom Area <$>......... Search File AreaC<N>.... No Charge (FREE) Area <&>.... Privileged Securities;ENTER COMMAND - [F U D S & R A I P T + - C $ N & <Q>uit ]?
+-FUDS@RAIPTC$N&Q
+SPITFIRE requires at least one active area.U
2Restructuring the message base. Please stand by...U
Enter Description: U
Enter Security: U
Enter Amount Of Days: U
Enter Number Of Lines [10..99]:
+Enter message conference number to update:
There is no such conference.U
Enter Net ID Name: U
Untitled Message ConferenceU
5The maximum number of conferences are already active.U
SFMCONF.DAT
SFMCONF.$$$U
Delete which conference?
.LMRU
Insert before which conference?
.LMRU
"The message base cannot be altered
while other nodes are busy.
Conference Description.. : "
Msg Conference Access... :
Equal To Caller Security(Equal To Or Greater Than Caller Security
Public Messages Only.... :
Message Entry Security.. :
Conference Security..... :
Net-Mail Conference..... :
Maximum Msg Length...... :
Purge Msgs Older Than... :
days
Caller Msg Deletion..... :
Purge Unreceived Msg.... :
Purge Old Thread Msg.... :
Net ID Name............. :
Allow Message Routing... :
Privileged Securities... :
>>>> RECORD [
Of !] MESSAGE SYSTEM RECORD MENU <<<<C<N>.......... Net-Mail Toggle <M>... Conference DescriptionC<S>...... Conference Security <@>........ Conference AccessC<#>............ Record Number <A>........... Add New RecordC<P>..... Public Messages Only <C>...... Caller Msg DeletionC<I>.... Insert New Conference <D>........ Delete ConferenceC<O>........ Old Message Purge <U>..... Unreceived Msg PurgeC<+>.......... Next Conference <->...... Previous ConferenceC<T>..... Purge Old Thread Msg <L>....... Maximum Msg LengthC<R>.... Allow Message Routing <E>... Message Entry SecurityC<!>.............. Net ID Name <&>.... Privileged SecuritiesCENTER COMMAND - [N M S @ # R A P C I D O U + - T L E ! & <Q>uit ]?
+-NMS@#RAPCIDOUTLE!&Q
1SPITFIRE requires at least one active conference.5The maximum number of conferences are already active.U
j<-u&
!, you are not allowed to pack the+caller database while other nodes are busy.
Pack caller database? [Y/n] 0Would you like to purge inactive callers? [Y/n] 4Purge callers who haven't called for how many days?
Working! Please stand by...U
Sorry,
already exists.U
Enter first name:
Enter last name: U
Enter Password: U
Enter Birth Date [MM-DD-YY]: U
Enter New Date: U
Enter Phone NumberU
$<N>umber Of Files, <B>ytes, <Q>uit?
Enter New Number
Enter K-BytesU
Enter New AmountU
(<N>umber Of Msgs, <C>onference, <Q>uit?
Enter NewU
Enter New Security: U
Enter New Subscription Date:
MM-DD-YY
00:00U
#Enter record number to update: [1..
There is no such record.U
Name...... :
Subscription.. :
Address... :
Last File Area :
Password.. : ****
Msg Conference :
Phone No.. :
Security Level :
Birth date :
K Uploaded.... :
Time Left. :
K Downloaded.. :
Last Call. :
Expert Mode... :
Times On.. :
More Prompt... :
Uploads... :
Downloads..... :
Msgs Left. :
Original Log.. :
Unknown
Marked for deletion.
Locked Out.
Purge Allowed. :
>>>> RECORD [
Of "] SPITFIRE CALLER RECORD MENU <<<<B<+> Next Record <-> Previous Record <D> Downloads@<N> Caller Name <X> Expert <U> UploadsH<A> Caller Address <&> Delete Caller <M> Change Msg DataG<P> Caller Password <L> Lock Caller Out <C> Last File AreaB<#> Caller Phone No <T> Times On <!> Time LeftD<R> Record Number <E> Enter Subscription Date <$> More PromptC<F> Find Caller <S> Security Level <B> Birth DateF<O> Original Log Date <@> Add New Caller <Z> Purge AllowedKENTER COMMAND - [+ - D N X U A & E P L C # T ! R M $ F S B O @ Z <Q>uit ]? U
Unable to find SFUSERS.DAT.
+-N$#&!APRQDLTMXSFUBECO@Z
<V>iew, <C>hange, <Q>uit?
Password=U
(<Vu$
}<Lu%
T<+u+
%<-u!
Which event? [A..M]
Event
is already active. Do you wish to change it? [y/N] -Event M is utilized to pack the message base.
Do you wish to continue? [Y/n] ,0=Sunday, 1=Monday, 2=Tuesday, etc....7=All.
Enter day for event
, [0..7]:
Mark as completed today? [Y/n]
Mark as on time event? [y/N] U
Which Event? [A..M]
>>>>>>>> EVENT
<<<<<<<<<
Message Base Pack Schedule.
Event "
" is
active.
" has
been completed today.
Time of event... :
Day of event.... : Each Day.
SunMonTueWedThrFriSat
On time event... :
Which Event? [A..M]
-Event M is utilized to pack the message base.
Are you sure? [Y/n]
Event
has been disabled.
is not active.U
>>>>>>>> EVENTS MENU <<<<<<<<<C<L>............ List An Event <E>.......... Enable An EventC<D>......... Disable An Event <Q>..................... QuitC<+>............... Next Event <->............Previous Event
<G>........ Goodbye & Log Off +-LEDQG
+-LEDQ
EVENTS MENU - [L E D Q + -
>>> FILE REMOVAL MENU <<<
<C>.... Erase CALLERS.LOG
<H>... Erase HEYSYSOP.LOG
<S>... Erase SFPURGED.USR
<U>.... Erase SFUSERS.$??
<Q>................. Quit!FILE REMOVAL MENU - [C H S U Q]?
CHSUQ
Delete CALLERS.LOG? [y/N]
Delete HEYSYSOP.LOG? [y/N]
Delete SFPURGED.USR? [y/N]
SFPURGED.USR
SFUSERS.$??
Erased
No files erased.U
-Sorry, this feature can only be used locally.
Print to <D>isk,
<P>rinter,
<Q>uit?
There is not enough disk space!
SFUSERS.LST
SFUSERS.DAT
Unable to access SFUSERS.DAT. Creating
Press ESC to abort.
SPITFIRE CALLER DATABASE -
* / 4 = E Q d x }
4 F K P n s x
!5!:!?!\!a!f!
"""3"\"f"s"
$[$`$n$v$~$
%2%@%O%c%q%
&(&:&?&D&O&a&f&k&v&
':'C'M'c'|'
( (5(=(B(G(L(W(l(t(y(~(
(D)I)W)_)g)o)M,U,`,r,w,|,
-#-5-:-?-J-\-a-f-q-
.$.).4.F.K.P.[.m.r.w.
/0/5/:/E/W/\/a/40J0S0]0s0
1+1A1Z1_1d1x1}1
2$2)242J2`2v2
3&383=3B3G3O3^3j3t3y3
424D4I4N4_4q4{4
5"5,515<5F5K5V5`5e5
6$6)6.6E6U6c6
7%7?7f7|7
8'898>8C8Z8i8
9$959
= =%=0=B=G=L=W=i=n=s=~=
>,>1>6>A>S>X>]>h>z>
? ?+?=?B?G?R?d?i?n?
B&B3B8BDBLBWBiBnBsBxB
C#C0C5C:CECYC^CcChCsC
D#D.DLDQDVDaDuDzD
E!E&E1EEEJEOETE_EpEuEzE
F(F-F2F7FBFUFZF_FdFoF
F=GaG
H%HZH~H
I"JGJ[J
K*K/KHKMK\KiKnK{K
L*L/L<LEL
M'M3MZMcMuM
MCNHNUN^N{N
P"P,PIPSPXPaPsPxP
P-Q2QIQQQ_QdQ
Q*R/RTR\R
W0W5WJWOWlWqW
X#X-X7X<XFXWXcXsX
Y)Y3Y8YPYUY_YtY
Z(Z2Z<ZAZNZ^ZhZzZ
[0[5[M[W[
\$\-\n\x\
\ ]*]/]C]n]s]
^/^=^e^j^w^
^p_u_
`%`.`K`P`
a!aUava
a8bBbYbbbgb~b
cKcUcZcwc|c
d1d;d@dRdWdpdzd
d'e,eCeKe]ebe
f%f/fGfPfUf_fsf}f
g/g8g=gGgWgagyg
h h*hNh`hehjh
i0i8i`iei
j&j/j4j>jRj\jtj}j
k%k5k?kXkakfkpk
k l'l
r2r>rHrRrjr
s.s8sBsGsQsbsnsxs
t3tEtJtOtatmtwt
t#u3u=uBuLu}u
v-v2v<vDvNvXvbvlvvv
wEwJwbwlw}w
x1xKxPx
z3zIzSzXzbzgzwz
{/{8{F{K{c{h{
|"|6|J|Z|e|o|t|y|
}!}/}B}Q}t}
~A~X~]~y~~~
last called on
"Unable to make satisfactory match.U
SFUSERS.PTR
Searching for
, please stand by...
Are you looking for
? [Y/n] %Continuing search, please stand by...U
Enter full or partial name:
SysopU
BBSNAME.DATU
.LMRU
.LMRU
SFMCONF.DATU
&Send this message via net-mail? [Y/n] ,Would you like to route this message? [y/N]
Enter routing number or name:
Save to which Conference?
< ENTER > = Current Conference <#>, <L>ist, <Q>uit:
Mark as public message? [
y/N]
Y/n] )All messages left in Message Conference #
are marked as public.U
Subject: U
Message entry prohibited.
All messages are marked public. Non-Public messages are allowed.
Net-Mail ConferenceU
MGLST
SFMCONF.DAT%MESSAGE CONFERENCES AVAILABLE TO YOU.
Message Conference #
&You can't leave a message to yourself.
is marked as deleted.! has been locked out of this BBS.
This message is already being
sent to
Saving to message conference
< ENTER > = "All Callers"
Message to:
Sysop
's message queue does not
include message conference #
's security level does not$allow access to message conference #
Carbon copy #
, does not call this BBS.
Message
Try again? [Y/n]
Replying to message number 6, would you like to change the message subject? [y/N]
Message
Entering message reply to
./, sorry you can't leave a comment at this time.
Entering comment to
Comment
Its_A_Comment0Sorry, there is not enough disk space available.
[< Line Maximum] - Enter your message now - < ENTER > to quit.
< ENTER > = Resume message'Enter line(s) to quote: [Example 5..8]
#Enter path+name of file to import: SFMSG.TXT
2<S>ave <E>dit <A>bort <C>ontinue <B>egin Again5<R>eplace Line <L>ist <I>nsert Line <D>elete Line #Enter Command [S E A C B R L I D]? SELACRIDB
Enter Line Number To Edit [1..
1 , you cannot edit a quoted line..Old portion to replace;New replacement portion
Sorry, too many characters.,Sorry but the old portion couldn't be found.
, there is no such line.
, there is nothing to save.
Continue your message...", you have used the maximum lines.%Clear message and begin again? [y/N] "Message cleared.... Begin again...
, there is nothing to list.,Enter line range to delete: [Example 5..8]?
Line deletion successful.
, there are no lines to delete. Enter line number to replace [1-
Old line number
Enter new line: , there isn't a line to replace.
Insert before line number [1- New Line:", no lines exist for an insertion.
Abort this message? [Y/n]
, you have 3 lines left.
Unable to save
comment.
message.
Saving comment addressed to
Carbon copy addressed to
Saving message #
addressed to Message #
to be sent via net-mail.
Message aborted.U
'<Au#
), do you wish to preview messages? [y/N] U
SFMCONF.DAT
Message Conference #
Include Message Conference #
in your queue? [Y/n] U
,Add which message conference to your queue?
, conference number
has been added to your queue.
is already in your queue.U
1Delete which message conference from your queue? =, you are required to have conference number 1 in your queue.
, conference number " has been deleted from your queue.
is not in your queue.U
SFMCONF.DAT
Message Conference #
&The above listed Message Conference(s)$are presently in your Message Queue.(Do you wish to change your queue? [Y/n]
>>>> MESSAGE QUEUE MENU <<<<?<A>.......... Add A Conference <C>........ Current Queue List?<D>....... Delete A Conference <I>... Include All Conferences?<L>...... List Msg Conferences <R>.... Remove All Conferences?<S>........ Select Conferences <Q>...... Quit To Message Menu
Current MESSAGE CONFERENCE is #
"(MESSAGE QUEUE MENU - [A C D I L R S Q]?
ACDILRSQ-Include all conferences in your queue? [Y/n] .Remove all conferences from your queue? [Y/n] U
Y<RuA
,< ENTER > = Continue, <Q>uit or Read Msg #:
< ENTER > = Continue, <R>eply
'Unable to browse messages at this time.", there are no messages to browse.
, you last read message number
Starting with message [1..$] or < ENTER > = Last message read:
, there is no such message.(, these messages in message conference #
are available to you.7, the following message(s) are marked as non-public...
Msg #
was left on
FROM: SUBJECT:
THREAD
NET MAIL
MSG), there are no messages available to you.U
-6 key word maximum. Example: SF;SPITFIRE;v3.5
Enter Key Word(s): U
Continue search? [Y/n] U
&Unable to perform search at this time.", there are no messages to search.
Number of messages [1..
] Start search at message number:
, there is no such message.
Scanning message conference #
, please stand by.
, the text could not be found.
, the text was found
times.
time.U
.IDXU
.IDXU
.IDXU
, there is no such message.
Message number
is now undeleted.U
Deleting message number
, please wait.
Message number
is now deleted.U
, there is no such message.$, you can not delete message number
Loading message conference #
Please stand by...
.IDXU
<Enter Message Conference Number, < ENTER > to list, <Q>uit? ), you are already in Message Conference #
Read Msg Conference #
- " "? [Y/n] 8, there is only one message conference available to you.U
Address Message #
to "All Callers"? [Y/n]
, message number
is now
public.
, that is an invalid command.U
Enter Command: [N
Q Read <1..
<-> Previous
- <R>eply
<D>elete
<E>nter A Message
<E>xit Message Thread
< ENTER > = Next
<F>ollow Thread
<P>ublic
<U>ndelete
X <X>port
<C>opy
<Q>uit
Q]? U
Copy to which conference? [1..
Currently addressed to
Change? [y/N]
< ENTER > = "All Callers"
Message to:
.DATU
7, do you wish to review the message statistics? [Y/n]?
Reviewing
queued& message conferences, please stand by.
Message conference #$>>>>> MESSAGE QUEUE STATISTICS <<<<<#Total Messages Scanned.......... : #Total New Messages Scanned...... : !New Messages In Your Queue.... :
TO YOU:! New Messages To You........ : ! Received Messages To You... : !FROM YOU...................... : 1Do you wish to review your message(s) now? [Y/n] &<T>o You <F>rom You <B>oth <Q>uit
Enter Choice - [T F B Q]?
TFBQ%Read received messages to you? [Y/n]
, you have no messages.U
Passing message(s)
... <NET-MAIL
- SENT
<NON-
< PUBLIC>
<DELETED>
<RECEIVED>
<THREADED MESSAGE>
Its_A_Comment
Comment No.
Message No.
was left on
To....... :
From..... :
Subject.. :
CARBON COPY OF MESSAGE
To........ :
Message Conference #
)It appears the message base is corrupted.
Your Sysop has been notified.
Node_ID:
", your security does not allow you
access to thread message #
, you last read message number
in conference #
Enter message # [1..$] or < ENTER > = last message read:
, there is no such message.
Scanning for comments...
Message No.
has been received.$Do you wish to delete it now? [y/N]
, you have
minutes left on system.
READING
YOUR MESSAGES
MESSAGE NO.
Message Copied.
Unable to copy message.
Enter Command: [
>>>> MESSAGE THREAD MENU <<<<
<S>.......... Start Of Thread
<F>............. Forward Read
<B>............ Backward Read
<E>...... Exit Message Thread
Current MESSAGE CONFERENCE is #
"'Delete the original message now? [Y/n]
Export to <D>isk or <P>rinter?
Writing MSG
Exported from
DATE..... :
TO....... :
FROM..... :
SUBJECT.. :
-, the end of message thread has been reached.0, there are no messages in thread past message #
Returning to starting point.3, the beginning of message thread has been reached.,, there are no more messages in conference #&, you have no messages in conference #+, that is all your messages in conference #U
>>>>> READ MESSAGES MENU <<<<<
<T>... This Message Conference
<A>... All Message Conferences
<O>... Only Queued Conferences
<Q>...................... Quit
Current MESSAGE CONFERENCE is #
" READ MESSAGES MENU - [T A O Q]?
TAOQ,, you have read all messages in conference #U
You are not allowed to pack the(message base while other nodes are busy.
Pack message base? [Y/n]
Working! Please stand by...
/OLD=
/POT
/POU
SFMSGPCK.BAT
COMSPEC
Executing Scheduled Event "M".
SPITFIRE ready for use at U
/ < K e j y
+ 4 > N f p u
"M"^"c"m"r"
#,#>#_#z#
$%$/$4$D$U$Z$d$i$
%-%a%r%w%
&$&?&d&
'p'z'
(E(Z(l(
/ 0J0\0a0f0v0
1)13181_1s1}1
2 232J2^2
3=3L3\3
4(494H4X4p4
5&5+5=5B5Q5
7E7x7
8&8L8\8w8|8
9&979F9
90:]:
;!;&;7;F;];g;v;{;
<\<a<f<~<
>B>V>j>t>~>
?)???J?o?
?0@7@F@b@p@
@LAXAjAtAyA
B7BABPB`BkBzB
B)C3C8CcC
CMDqD{D
EBETEYE^E
E*F4FNFpF
G G!G,G
H!HDHNHSHfHnH
K$K.K3K\KzK
L L%L2L7LALILXL]L
M&M+M2M7M<MWM_M~M
N=NUNZNdNnN|N
O/OWOfOkOrOwO
O:PIPZPdPsP
P,QoQ
R$R2RARPRXRkR
S?SQSVSgS
T+T=TGTOTWT
VFV\VaVkVyV
XHXRXdXiXsXxX
Z!Z4ZKZuZ
Z0[>[^[h[q[
\3\e\r\
]#]K]Y]q]v]
`Z`d`n`x`
a#a^afa
c+c=cKc
c%d4d?dkd
g#g(g-g\gagugzg
h"h1hBhVh[hsh
i2i<iAiLizi
j*j:j?jFjKjUjZj_jlj
k'k,k=kJkZk_klkvk
l$l)l.ltl|l
l0mGmTmom
n-nAnanhnmn
o=oEovo
p#q6qOqXqbqwq
r+r5r:r?rirnr
s*s/s?sPsUs_sdsnsss
s+tTtYt}t
u*u/u9u>uPuZuluqu{u
v@vGvLvpvuv
w^whw
x]x4yMy
ydziz
z {Z{
| |0|A|F|P|U|
|+}u}
~"~0~@~Q~V~`~e~j~
%Would you like to enter a comment to
? [Y/n] U
SFONFAIL
Access Denied.&Sorry, you are going to be logged off.U
One more try.
Enter your password:
Incorrect attempt,
Testing for RIP terminal, please stand by...
Access Denied.
LOCKOUT', you have been locked out of this BBS.
LOCKOUT.BBS
JOKER.DATU
Error correction modem detected.
SFPRELOG
Your Sysop is
- Node
- !GRAPHICS: <A>nsi, <R>ip, <N>one?
ARN'Do you want ANSI COLOR GRAPHICS? [y/N]
WELCOME1
One more try.
Enter your first name:
Enter your last name:
SFMAINT+A maintenance operation is being performed.$Please try again in a few minutes...
CALLERS.TMP
Searching for
, please stand by...
PRIVATE
PRIVATE.BBS*, this BBS is configured as a PRIVATE BBS.# is already logged on another node.
Unable to find
....*<R>e-Enter Name, <N>ew Caller, <G>oodbye?
SUBWARN
SFSUBCHG
EVENTIME
SFNOTIME*, you have exceeded your daily time limit.
TOOMANY/, you have exceeded your daily amount of calls.U
Good
morning,
afternoon,
evening,
, welcome back.
You are caller number
There have been
files uploaded today.
files downloaded today.
You last called on
calls today.
You have called
other time
today.
This is your first call today.
times.
You are allowed
minutes per day.
minutes on your first day. You have
minutes left today.
minutes this call.
callers access this BBS.
Your security level is
SFLOGON.BAT
SFSEC
SFBDAY0, you were denied access to this BBS during your
last attempt (
) to log on for failing to know9your correct password or birth date. If you suspect that:someone else was using your name, please notify the Sysop.
THOUGHTS.BBS
, please consider this...
ALL.*
SFNOD
SFREMINDU
SFNEWU.QUE
SFNEWU.REP
SFORDER
%, the appropriate file was not found.,Your Sysop has been notified of the problem.
SFMQDONE*, you have already answered this question.
SFNEWU.TMP
using Node
Question not answered.
MM-DD-YY
00:00
[y/n]
G <-uk
SFORDER.MNU
SEC<=
SEC>=
,ONETIME
,PRINT
SFORD(>>>>>>> ORDER/QUESTIONNAIRE MENU <<<<<<<
<Q>........ Quit To Main Menu
<G>........ Goodbye & Log Off
ENTER COMMAND: [
Q G]?
:B<Ar#<Fw
b<Hr#<Pw
;<Rr#<Zw
SFPAGED
SFPGOFF0, sorry but your Sysop is not available to chat.
ALT+C to activate chat mode.
Paging your Sysop.
SFUNANSU
0Enter the phone number of the BBS to be added...
SFBBSLST.DAT+Sorry, that phone number is already listed.
Enter the name of the BBS:
BBS"Enter the maximum system speed of
bps+ has been added to the Bulletin Board list.U
SFPROMSG)File Transfer Protocols Available To You. <1> Ascii
<2> Xmodem Checksum
<3> Xmodem CRC
<4> 1K-Xmodem
<5> Ymodem (Batch)
<6> Zmodem (Batch)
<T> Telink
<S> Select at time of transfer7Enter the protocol of your choice - [1 2 3 4 5 6 T S]?
123456TSU
-, you can select a file transfer protocol now0which will automatically be utilized during your2uploads and downloads or you can manually select a+protocol during your uploads and downloads.<Would you like an automatic upload/download protocol? [y/N]
One more try.
Enter new password:
Please verify password:
Sorry, passwords did not match.!, your password has been changed.
#, please call back with a password.U
One more try.#, your address has been changed to
.-, please call back with your correct address.U
One More Try.
Enter your phone number(, your phone number has been changed to
.*, please call back with your phone number.U
1Your birth date is required as a second password.
One More Try.,Please enter your date of birth [MM-DD-YY]:
, you are being logged off.U
'>>>>>> JUST FOR YOUR INFORMATION <<<<<<
Your Name :
Security Level :
Last Time On :
Number Of Times On :
Birth Date :
Times On Today :
Files Uploaded :
Files Downloaded :
K Uploaded :
K Downloaded :
Original Log On :
Unknown
Subscription Date :
Node Chats Left :
Messages Entered : '>>>>>>>> THINGS YOU CAN CHANGE <<<<<<<<
<W> Address :
<H> Hot Key :
<#> Phone Number :
<D> Display Size :
<S> Scroll Prompt :
<G> Graphics :
<F> File Transfer :
Select at time of transfer
Ascii
Xmodem Checksum
Xmodem CRC 1K-Xmodem
Ymodem (Batch)
Zmodem (Batch)
Telink
<M> More Prompt :
<P> Password : ****
<C> Change Color : ,CHANGE MENU - [W S # H C G D M P F <Q>uit]?
WSDHCPQ#MFG
+Enter ANSI foreground color code [31..36]:
<V>iew, <C>hange, <Q>uit?
Password=!Enter new line length [40..144]:
Enter new page length [10..24]:
, hot key stroke is now turned
off. , color graphics are now turned
[00;40m
Turn Rip graphics on? [Y/n] -, color graphics are not presently available.1, the <C>ontinue prompt scrollback is now turned &, the <C>ontinue prompt is now turned
>h=-u
>k=-u
>p=!|
(<Vu$
NEWUSER
PRIVATE*, this BBS is configured as a PRIVATE BBS.
EVENTIMEU
0 : B T Y w |
( A F Y ^ h
!,!=!B!L!Q!f!p!u!
"-"7"H"M"W"e"{"
#%#*#:#D#N#S#]#g#l#q#
$!$3$8$H$P$|$
%1%E%J%O%d%n%s%
&*&/&:&?&N&]&r&
','1'='K'e's'~'
' (/(R(Y(a(k(
)")K)P)U)h)
+L+V+[+o+
,.,9,>,C,Z,_,r,
-.-D-I-`-e-
.!.&.8.G.L.V.e.{.
/"/,/@/E/O/^/t/y/
0P0U0}0
111I1S1^1m1
212N2f2p2{2
373A3I3Q3Z3
494K4V4[4k4u4}4
5%545Z5i5
6"6?6D6p6u6
7(797>7S7
7 8!8+868E8X8b8m8|8
909;9F9f9m9|9
:j;t;|;
<3<[<f<k<p<
=)=q=
>E>h>u>
?4?^?m?}?
?"@9@O@T@^@c@
A A*A/A9AHARA
B B7BHBRBaBqBvB+CJCXCaCjCsC|C
DNDWDdDuD
E!E&E0E5EOEYEmEwE|E
G8G=GHGMGiGxG
H;H@HxH
I'I1I9ISI]IeI|I
J3J8JmJrJ
K0K:K?KMLZLpLzL
LfNzN
P,PIP^PlPwP
Q%Q/Q4Q9Q>Q
R!R+R5R?RDRIR
R<SZSgSuS
T"T2T<TGTQTVT
T[UoU
V V7VMV_VqV
V!W`\i\v\
]-]7]<]U]i]n]s]
^/^4^9^C^[^l^
_/_4_9_>_K_[_e_j_}_
` `%`*`4`E`Q`d`|`
a.aEaJaVabala
b1b;bGbTblbwb
c'c9cQc\cgctc
d%d/d=dJd`djdxd
e%e*e>eZebepe
f5f:fPfZfhfuf
f/g@gEgOgTg\gdg
i!i&i.i6iEiTiU
Timed Out.
Header Error.U
Ready to send
via
.*You have 60 seconds to start the transfer.
Press CTRL+X to abort.
was successfully transferred.
Transfer rate was
cps.
.PAK" doesn't appear to be a text file.
SFDOWN*Preparing for transfer, please stand by...
Ready to start...
SFEXTDN
.BAT
SFEXTRAN.LST
COMSPECU
SFBATCHD
>>>> BATCH DOWNLOAD MENU <<<
Current
FREE
FILE AREA is #
BATCH MENU
AVBRSLCQ?G
FILECTRL
SPITFIRE BATCH HELP...
Which Command
AVBRSLCQ?G , if you return to the File Menu!your batch queue will be cleared.%Are you sure you want to quit? [y/N]
,, you have 60 seconds to start the transfer.U
>:BGu
L a |
& / @ T h |
!4!U!_!d!n!{!
!""D"N"V"
###.#9#L#Z#f#n#
$A$F$T$Y$
5An error has occurred...please try your upload later.U
Low Blk Number
bn Was
Com Was
Chksum/CRC Error
was not properly received.U
SFBATCHU
>>>>> BATCH UPLOAD MENU <<<<
Current
FREE
FILE AREA is #
BATCH MENU
AVBRSLCQ?G
FILECTRL
SPITFIRE BATCH HELP...
Which Command
AVBRSLCQ?G , if you return to the File Menu!your batch queue will be cleared!%Are you sure you want to quit? [y/N]
Log off after transfer? [Y/n]
Ready to start...3, are you sure you want to clear your queue? [y/N] U
C<Su?
There are bytes free on the upload drive.~
Ready to receive
SFEXTBI
SFEXTUP
.BAT
TEMPLIST.SF
COMSPEC
, you have been compensated
minute(s) for your upload(s).
Thank you for your uploads,
A F i |
@ E ` w
!1!6!@!a!f!k!u!
"("2";"@"P"Z"c"
#"#8#=#F#K#Q#Y#^#c#w#~#
$B$M$\$t$
%,%p%z%
&)&3&8&F&K&d&
'9'J'X't'
(#(((9(G(W(e(z(
)<)C)H)f)
*3*V*q*
ZNOCARRIER
ZTIMEOUT
ZERROR
ZRQINIT
ZRINIT
ZSINIT
ZFILE
ZSKIP
ZABORT
ZRPOS
ZDATA
ZFERR
ZCHALLENGE
ZCOMPL
ZFREECNT
ZCOMMAND
ZSTDERR
ZUNKNOWNU
cpsU
File: Null File
Bytes Expected.... : ?
Bytes Received.... : 0
Consecutive Errors : 0
Total Errors...... : 0
File Remaining.... :
>.........................<
Last Msg: Awaiting Handshake
Time Remaining.... :
<ESC> To AbortU
Long packetU
$$$$$$$$U
Sending file
Error reading disk
Trouble?U
File positioning errorU
1 6 ; U Z _ y ~
'!:!@!E!T!v!
"*"="B"Q"
#1#:#C#U#i#~#
#E$J$
'>(N(V(
+0+J+S+d+
+*,3,D,y,
.l/q/}/
0\0e0w0
1h2z2
4G4_4z4
5-5:5T5d5n5y5
666M6n6
7'7/7G7a7u7}7U
SFFILES.BBSU
SFNODE.DAT
SFNODE.DAT not found.
Do you wish to create it? [Y/n]
DISPLAY
EXTNOD1
MESSAGE
ATS0=0Q0V1E0M0H0S2=1X1^M
ATZ^M
Created SFNODE.DAT
SPITFIRE halting.
SFSYSTEM.DAT
Invalid WORK directory.
SFSYSTEM.DAT not found.
Sysop
Created SFSYSTEM.DATU
&You Need To Set The Date & Time First.
Reading SPITFIRE work files.
SFWHOSON.DAT'
Report - Maintenance Being Performed.( Pausing Until Maintenance Is Complete." Press Any Key To Return To DOS.
SFUSERS.DAT
SFUSERS.DAT not found.
Do you wish to create it? [Y/n]
Created SFUSERS.DAT.
SPITFIRE halting.
SFUSERS.PTR
SFFAREA.DAT
SFFAREA.DAT not found.
Untitled File Area
Created SFFAREA.DAT
SPITFIRE Halting.
SFMCONF.DAT
SFMCONF.DAT not found.
Untitled Message Conference
Created SFMCONF.DAT
CALLERS.LOG
Created CALLERS.LOG.
HEYSYSOP.LOG
Created HEYSYSOP.LOG
SFMAIN.MNU
SFMAIN.MNU not found.
SFFILE.MNU
SFFILE.MNU not found.
SFMSG.MNU not found.
SFSYSOP.MNU
SFSYSOP.MNU not found.
Building SFMSG
Building U
EMS memory is used for SPITFIRE.OVR.
ANSI/Graphics toggled on.%
SPITFIRE configured as private BBS.)
Birth date required as second password.
SHARE detected.
DESQview Version
detected.
baud requirement.
Printer usage active.(
Upload time compensation ratio set at
to 1.
Hardware data flow control disabled.
enabled.U
SFEVENTS.DAT
Active Scheduled Event(s)
SPITFIRE home path is
Work files path is
Display files path is
Message files path is "
External protocol files path is U
HEYSYSOP.LOGU
SFUSERS.DAT
SFUSERS.PTR
CALLERS.LOG
SFWHOSON.DAT
SFBATCHD.DAT
SFBATCHU.DAT
SFDOORS.DAT
L Q]?
TLSBQ
>> View Log File Menu <<
<C>......... CALLERS.LOG
<H>........ HEYSYSOP.LOG
<N>.......... SFNEWU.REP
<O>...... SFORDER<x>.REP
<S>........ SFPURGED.USR
<Q>................ Quit!View Which File - [C H N O S Q]?
CHNOSQ
CALLERS.LOG
HEYSYSOP.LOG
SFNEWU.REP&View Which Questionnaire File [A..Z]?
ABCDEFHIJKLMNOPRSTUVWXYZ
SFORDER
SFPURGED.USR
Show Data Since...
<T>........ Today's Date
<B>... Beginning Of File
<S>........ Specify Date
<L>......... Last Log On
Enter Command - [T B S
MM-DD-YY
is an invalid date.
Not Found.
Searching. Please stand by...
was not found.
Starting at U
q<Lu(
E<Su&
'This feature is for remote useage only. Please use ALT+J to jump to DOS.
Enter password:
has jumped to DOS.#Enter "EXIT" to return to SPITFIRE.
COMSPEC
SFREMOTE.BAT U
CARRIER
CONNECT
ERROR
Caller ID reported U
- 2 9 H Y u
!E!J!Y!
"#"2"C"w"
#8#=#L#
$%$6$R$
%2%<%T%^%c%m%{%
&j&t&
','c'}'
(4(9(L(Q(X(](o(t(
(m*v*
+#+A+F+T+m+w+
,",,,G,L,h,r,
-1-6-;-M-R-W-p-u-z-
.".'.@.R.Z.g.l.q.
/)/./3/
0&080=0F0
1)1.131Y1d1i1n1s1
3"343D3L3Q3V3h3x3
364?4J4T4_4d4r4
5"5'5
6!6+606E6O6T6i6s6x6
7!727D7I7y7~7
8;8Q8f8|8
9"9D9v9
:3:L:b:
;1;B;d;i; >G>
?+?;?E?q?
@)@C@H@U@b@l@v@
A-A=AHATA
B4B>BCBHB`BeB{B
CUCpC
D$DKDPDaDhDxD
E(E2E7EFETEdE
F1FPFUFZFhF
G+G8GJGZGrG
H5H}H
I I7INIbIvI
J*J4JBJLJ}J
L+L=LBLGLYL^LcLuL
M M0M:MDMVM[M`MeMnMsMyM
N%N<N
O'O?OWOkO
CDROM
SFBATCHD.DAT
Erase
tagged files? [Y/n] U
CDROM!
Copying
for transfer.U
CD-Rom Area #
File Area - #U
Wildcards are not allowed here. Invalid use of wildcard feature.
CLOCK$
, that is not a valid filename.U
(NC)U
00:00:00
DESCRIPTION:
bytes to send
blocks.
Estimated Transfer Time: (, not enough time left for the download.U
cpsU
Ready to receive
via
for Sysop only
DESCRIPTION:
Waiting for start...
Press CTRL+X to abort.
File:
Blks Expected... :
Block Number.... : 0
Consec Errors... : 0
Total Errors.... : 0
Last Msg: Extending Handshake
<ESC> To Abort.U
File:
File: Null File Total B
locks
ytes. ...... :
Current Block..... : 0
Bytes Sent........ : 0
Consecutive Errors : 0
Total Errors...... : 0
File Remaining.... :
>.........................<
Last Msg: Awaiting Handshake
Time Remaining.... :
<ESC> To AbortU
Xmodem (Checksum)
Xmodem (CRC) 1K-Xmodem
Ymodem Batch
1K-Xmodem-g
Ymodem-g Batch
Telink
ZmodemU
)File Transfer Protocols Available To You. <1> Ascii
<2> Xmodem Checksum
<3> Xmodem CRC
<4> 1K-Xmodem
<5> Ymodem (Batch)
<6> Zmodem (Batch)
<7> 1K-Xmodem-g
<8> Ymodem-g (Batch)
SFEXTDN.BBS
SFEXTUP.BBS
BATCH
USEFILE
BI-DIRECTIONAL
12345678QT
<T> Telink
<Q> Quit
Select a transfer protocol:
Ascii
Xmodem Checksum
Xmodem CRC 1K-Xmodem
Ymodem (Batch)
Zmodem (Batch)
1K-Xmodem-g
Ymodem-g (Batch)
used.U
an error has occurred.
Please try your upload later.
Ready to receive
via ASCII.*You have 60 seconds to start the transfer.
Press CTRL+X to abort transfer
Number of bytes received: Time Out.
was successfully transferred.U
File:
Press <ESC> to abort
Press Ctrl+X to abort
Press Ctrl+S to pause
Press < ENTER > when ready.
Number of bytes sent:
NAK not received.U
SPITFIRE U
H` v
Enter name of file to U
view:
.ARJ" doesn't appear to be a text file.
Sorry,
was not found.U
Log off after transfer? [Y/n]
Transmitting batch queue.
file(s) to be sent totaling
bytes.U
File Name(s) .........
File Size .. Queued
.... Short Description
.....
. NoU
.TXTU
$<S>top, Tag File(s) For Use <A thru
Enter file name to remove:
has been removed from list.U
3, are you sure you want to clear your queue? [y/N]
>>>> Private File Waiting <<<<
<D>ownload
bytes. <R>emove
<S>kip
PRIVATE FILE MENU - [D R S]?
.TXTU
#Wildcards allowed. Example: SF35*.*
Enter filename to search for:
*.*4, that application of wildcards is not allowed here.#<T>his Area <A>ll Areas <Q>uit?
Searching
SFFAREA.DAT
was not found.U
Your last check was on 2Since MM-DD-YY or < ENTER > for since last check: U
$<T>his Area <A>ll Areas <Q>uit?
Searching
SFFAREA.DAT
%>>>>>>>>>> FILE STATISTICS <<<<<<<<<<
new file(s) since
A total of
downloadable file(s).
downloadable bytes.U
FILST
SFFAREA.DAT
FILE AREAS AVAILABLE TO YOU.
SFFAREA.DATU
3Enter File Area number, < ENTER > to list, <Q>uit? , you are already in File Area #
SFFILE
List
- " "? [Y/n] /, there is only one file area available to you.U
Searching
-6 key word maximum. Example: SF;SPITFIRE;v3.5
Enter Key Word(s): "<T>his Area <A>ll Areas <Q>uit?
SFFAREA.DATU
SFFAREA.DATU
SFNOUP.DAT
is not allowed to be uploaded.U
SFFAREA.DAT
already exists.
was found.
Do you wish to continue? [y/N] U
, you have uploaded file(s)
and downloaded file(s).
You have downloaded
file
today.
, you are allowed
more download(s) today.4 Security level changed per U/D ratio breech.
SFRATIO-, your upload/download ratio is unacceptable.U
DLMT4, you have reached your daily download amount limit.
It appears
is corrupted.
Your Sysop has been notified.
view:
Sorry,
was not found.)An error has occurred. Operation aborted.
Viewing the contents of ; Length Method Size Ratio Date Time NameC-------------------------------------------------------------------
Stored
Shrunk
Reduce-1
Reduce-2
Reduce-3
Reduce-4
Imploded
Deflated
Unknown
file(s) total
bytes,
compressed to
bytes at
%.+Sorry, the file MUST have a .ZIP extension.U
Unable to perform operation on
Operation aborted.U
Removed
from SFFILES.BBS.
Successfully erased
Unable to erase
Unable to find
Enter name of file to
move:
erase: 5Move to File Area number, < ENTER > to list, <Q>uit?
Moving
already exists in File Area #
Success!
Are you sure you want to erase
? [y/N]
to SFNOUP.DAT? [y/N]
SFNOUP.DATU
was successfully transferred.
Transfer rate was
cps.
, you have been compensated
minutes for a
minute upload.8 Security level changed per U/D ratio correction.U
is a zero byte file.2, you are not allowed to download from File Area #U
SFDOWN-Enter \ after filename for automatic log off.
EXAMPLE: file.ext\
download:
not found in File Area #
Search other File Areas? [Y/n]
Searching other File Areas.U
Adding File Number
... < ENTER > To Quit/, you do not have enough time left to download
Too many files in queue.
Unable to add
to queue.
added to batch queue.
Total Batch File(s):
Total Estimated Transfer Time:
\ Start batch transfer now? [Y/n]
, your batch queue is full.U
LBY^_
#>>> Automatic Log Off Scheduled <<<
<A>... Abort Automatic Log Off
<G>......... Goodbye & Log Off$Approximately 20 seconds to respond.
Thank you for calling, U
:B<Gu
SFFILES.
SFFILES.BBS
SFUPCASE.DAT
Please enter a description for
.-Enter \ before description if for Sysop only.-1---|---10----|---20----|---30----|---40----| Line No.
Uploaded By: 1, the description must be at least 10 characters.U
Adding file #
to queue.
SFUP(Add \ to filename for automatic log off.
EXAMPLE: file.ext\
Enter name of file to upload:
Checking for
, please stand by...
already exists.
Do you wish to overwrite
? [y/N] U
, there is nothing to do.U
, your batch queue is full. Start batch transfer now? [Y/n] U
TEMPLIST.SF
TEMPLIST.SFU
TEMPLIST.SF
, it appears that you uploaded
Searching for duplicate.
No Description ProvidedU
Name:
From:U
Copy to:
already exists.U
IMPORT file to Area #
"!Enter path+name of file to copy:
An error occurred.
already exists.U
SFIMPEXP
>>>> IMPORT/EXPORT MENU <<<<
Current
FREE
FILE AREA is #
IMPORT/EXPORT MENU
IERTFLCQG
NOSPACE), disk space currently prohibits uploads.U
) @ W n
!&!7!R!\!k!}!
"&"+"N"^"h"m"
"=#B#I#N#[#l#~#
%.%J%f%
&/&8&u&
(+(6(;(O(Y(^(h(
)&).)3)8)=)L)a)o)y)
***2*7*<*v*
+B+j+~+
+.,3,8,\,
,8-P-Y-j-y-~-
.!.,.1.A.[.n.
/7/</E/[/
0&03080F0[0k0r0~0
1"1+151:1K1
2Z2g2l2q2
3#353:3Q3
434D4W4
4a5k5z5
7%777A7P7
848]8|8
939C9M9\9q9|9
9,:D:Y:s:
;&;+;0;C;M;[;
<"<,<1<F<^<n<
=!=>=Z=m=
>;>V>k>
?%?8?F?K?]?b?x?
@D@I@V@[@j@r@
AQA_AdAuAzA
B!B,B?BIBbBgBoBxB
C+C0C:CBC
D'DCDMD]DiD|D
E!E3E8EHEMEjEoEzE
F-F2FHFMFmFuF
F(GDG
H H-H2HOHgHvH
I1I<IDILI^IcI
J6JOJTJ^JfJkJpJ
J/KDKIKbK
N0N5NDNtN
O&O.OGO
P%PKPPPaPfPtP
QLQoQ~Q
R.R8RWRfR
R(S2S7SVS[SyS
T1T6TBT[T`TnT
V#V-V>VNVXVbVuVzV
X!X?XIXiX
X1YIYYYhY~Y
Z)ZKZPZhZrZ
\&\6\D\]\m\w\
]&]6]@]c]r]
^ ^G^Q^Z^p^
_4_j_z_
`Uaiasaxa
aPbxb
d%d.dWdvd
e!e&e0e:eDeSeie
f&f<fGfUfdf
g(gfg}g
h#h-h7hFh\h
i?iNiui
j7jAj
k%kEkXk]kgklk|k
l"l'lAlKlTlhl
n3n=nFn\n
oCoNo
p5pQphp
q,q=qBqGqPq`qsq
r1rXrsr
s%sUsZs|s
t5u:u
v$w)wFwkwxw
x#yMyWy`yvy
z"z;z
{#{.{O{Z{c{
|"|3|>|M|h|r|z|
}%}/}:}D}I}N}g}{}
}5~}~
:SFCHT
.TXTU
:SFCHT
.TXTU
aborted chat.
CARRIER lost on other node.
Timed Out.
:\TEST
SFCHT
.TXT3Awaiting other node response... Press ESC to abort.
would like to chat.
Would you like to chat with
? [Y/n]
does not want to chat.
TLEFT
There are
minutes allowed for this chat.)Press ESC when ready to terminate chat.
Hello, this is
. What can I do for you?
This BBS supports
nodes.
SFWHOSON.DAT
Node
In local chat.
Operating door.
In node chat.
Using message base.
Transmitting file.
Unavailable.
Available for chat.', there is no one on the other node(s).0, would you like to initiate a node chat? [y/N]
Chat with which node #
Invalid entry.U
" , @ E O X a
SPITFIRE.SWP
Unable to allocate swap space
COMSPECU
It is presently
You have been on
minute
with
remaining.U
, that is an invalid command.U
SPITFIRE.HLP
, the help file was not found.
Your Sysop has been notified.U
I F1...... Review Log Files ALT+A... Maintain Caller Database@ F2...... Change Security Level ALT+C... Enter/Exit ChatG F3...... Toggle Sysop Page/Bell ALT+D... Jump To DOS - Off HookA F4...... Toggle Printer ALT+E... Configure EventsE F5...... Check Today's Statistics ALT+F... Configure File AreasF F6...... Take Five Minutes From Caller ALT+J... Jump To DOS - On Hook@ F7...... Give Five Minutes To Caller ALT+L... Lock Caller Out@ F8...... Toggle Full/Divided Screen ALT+M... Configure Modem@ F9...... Capture Chat To Disk ALT+P... Configure PathsC F10..... Quit SPITFIRE ALT+Q... Quick Local Log OnJ ALT+F1.. Log Caller Off With Msg ALT+R... Configure Msg ConferencesJ ALT+F2.. Log Caller Off Without Msg ALT+S... Log On Locally/Sysop NextI ALT+F3.. Remove Backup/Log Files ALT+T... Toggle SPITFIRE SwitchesC ALT+Z... Configure SPITFIREA Refer to the SPITFIRE manual for detailed information8 Press Your Favorite Key To ContinueU
>>>>>>>>> MAIN MENU <<<<<<<<<U
Which Command - [
MAIN MENU - [
>>>>>>>>> FILE MENU <<<<<<<<<U
Current
FREE
FILE AREA is #
Which Command - [
FILE MENU - [
>>>>>>>> MESSAGE MENU <<<<<<<<U
Current MESSAGE CONFERENCE is #
Which Command -[
MESSAGE MENU - [
>>>>>>>>> SYSOP MENU <<<<<<<<<U
SYSOP MENU - [
SFDORBUL
DORBUL
BULLETIN
BULLET
, the following bulletin(s) have#been updated since your last log-on
... #U
SFDORBULU
SFDORBUL.BBS
Bulletin <#>, <L>ist Bulletins,
<N>ew Bulletins
< ENTER > to Door Menu?
DORBUL
Bulletin #
SFDOOR
Executing Door "
"... Please stand by.
DOOR.SYS
COM0:
12-31-99
2: t#
SFDOORS.DAT0, your time remaining does not allow door usage.U
Presently Unavailable
SFDOOR.MNU
SEC<=
SEC>=
SFDORBUL.BBS
Doors have been used
time
today.
>>>>>>>>> DOOR MENU <<<<<<<<<
Currently Inactive
Unavailable
<?>........... Door Bulletins
<Q>..................... Quit
<G>........ Goodbye & Log Off
DOOR MENU - [
BULLETINU
BULLETIN.CLR
BULLETIN.BBS
There are no bulletins today.
Bulletin <#>, <L>ist Bulletins,
<N>ew Bulletins,
< ENTER > to Main Menu?
BULLET
Bulletin #
WELCOME1U
WELCOMEU
SFNWSLTR.CLR
SFNWSLTR.BBS The newsletter has been updated!#Would you like to review it? [Y/n]
SFNWSLTR
NUCALLER.*
SF2SLOW
Sorry, " requires a baud rate of at least
Access Denied.
SF2SLOW.BBS
>>>>>>><<<<<<<
>>>>>>><<<<<<<
>>>>>>><<<<<<<
>>>>>>><<<<<<<
>>>>>>><<<<<<<
>>>>>>><<<<<<<M >>>>>>><<<<<<< Press HOME Key For Help >>>>>>><<<<<<<
[ PAGE ON ]
[ PAGE OFF ]
[ PRINT ON ]
[ PRINT OFF ]U
$>>>>>>>> System Information <<<<<<<<
Your Sysop is
This BBS began on
There has been a total of
calls.
There have been
calls today.
There are
Message Conferences.
File Areas.
callers access this BBS.
You are logged on node U
(Are you SURE you want to log off [Y/n]?
You were logged on minutes.
minute. You have
minutes remaining today.!You have no time remaining today.
GOODBYE
Thank you for calling,
GOODBYE.BBSU
4J SPITFIRE Bulletin Board System is distributed under the shareware J concept. SPITFIRE can be utilized on a trial basis for not more than J thirty (30) days. In the event this software is used beyond the trial J period, then the registration fee is required. You are free to distributeJ SPITFIRE provided it remains in its original, unmodified condition and no9 fee is charged. J It is simple for you to register your copy of SPITFIRE. Simply mailJ $85.00 in U.S. funds (add $10.00 shipping & handling if outside of North J America) and a completed registration form to the address shown below. J Your registration fee will provide you a license to operate SPITFIRE.
913 - 39th Street
West Des Moines, Iowa 502657Call Buffalo Creek's BBS at (515) 225-8496 for support.
Thank you for using SPITFIRE.U
.REPU
LRSPU
ERRORU
CALLERS.TMP
CALLERS.LOG
SFINIT.BAT
SFINIT.BAT
Pre-Init String Failure(
Your modem is not properly responding.!
Do you wish to continue? [y/n]
BADINIT.BAT
COMSPEC
SPITFIRE continuing without proper response.
[ PAGE ON ]
[ PAGE OFF ]U
[ PRINT ON ]
[ PRINT OFF ]U
Full screen is now active.
Divided screen is now active.U
MAXUSERS
, the Sysop allows callers.
Sorry, there are already -Please try again at a later date...thank you.U
HEYSYSOP.LOG has been updated
Today's Statistics
Total Number Of Callers.. :
Total Calls Today........ :
Total Uploads Today...... :
Total Downloads Today.... :
Total Messages Today..... :
Total Door Usage Today... :
Total New Callers Today.. : 0 Press your favorite key to continue.U