home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Black Box 4
/
BlackBox.cdr
/
lan
/
ptf262.arj
/
@6F6F.ADF
next >
Wrap
Text File
|
1989-07-12
|
2KB
|
70 lines
AdapterId 06F6Fh
AdapterName "EICON TECHNOLOGY Single-Port Communication Coprocessor"
NumBytes 3
FixedResources pos[3]=1xxxxxxxb
NamedItem
Prompt "I/O Address"
choice "380-387" pos[0]=0xxx000xb io 0380h-0387h
choice "388-38F" pos[0]=0xxx001xb io 0388h-038Fh
choice "390-397" pos[0]=0xxx010xb io 0390h-0397h
choice "398-39F" pos[0]=0xxx011xb io 0398h-039Fh
choice "8380-8387" pos[0]=0xxx100xb io 8380h-8387h
choice "8388-838F" pos[0]=0xxx101xb io 8388h-838Fh
choice "8390-8397" pos[0]=0xxx110xb io 8390h-8397h
choice "8398-839F" pos[0]=0xxx111xb io 8398h-839Fh
Help
"This item is used to select the SPCC I/O Address.
Use the F5=Previous and the F6=Next keys to change
the I/O address selection."
NamedItem
Prompt "Interrupt Level"
choice "Level_3" pos[0]=x001xxxxb int 3
choice "Level_4" pos[0]=x010xxxxb int 4
choice "Level_5" pos[0]=x011xxxxb int 5
choice "Level_9" pos[0]=x100xxxxb int 9
choice "Level_10" pos[0]=x101xxxxb int 10
choice "Level_11" pos[0]=x110xxxxb int 11
choice "Level_15" pos[0]=x111xxxxb int 15
Help
"This item determines the Interrupt Level assigned
to the SPCC. Use the F5=Previous and the F6=Next
keys to change the Interrupt Level assignment."
NamedItem
Prompt "Memory Location"
choice "0D000:0000-0FFF" pos[2]= 00001000B mem 0D0000H-0D0FFFH
choice "0D400:0000-0FFF" pos[2]= 00001010B mem 0D4000H-0D4FFFH
choice "0D800:0000-0FFF" pos[2]= 00001100B mem 0D8000H-0D8FFFH
choice "0DC00:0000-0FFF" pos[2]= 00001110B mem 0DC000H-0DCFFFH
choice "0C000:0000-0FFF" pos[2]= 00000000B mem 0C0000H-0C0FFFH
choice "0C400:0000-0FFF" pos[2]= 00000010B mem 0C4000H-0C4FFFH
choice "0C800:0000-0FFF" pos[2]= 00000100B mem 0C8000H-0C8FFFH
choice "0CC00:0000-0FFF" pos[2]= 00000110B mem 0CC000H-0CCFFFH
choice "1C000:0000-0FFF" pos[2]= 00010000B mem 1C0000H-1C0FFFH
choice "2C000:0000-0FFF" pos[2]= 00100000B mem 2C0000H-2C0FFFH
choice "F0000:0000-0FFF" pos[2]= 11110110B mem 0F00000H-0F00FFFH
Help
"This item sets the address of the SPCC Memory Location.
The first hexadecimal digit of the Memory Location
defines the megabyte range (0 is the lowest 1MB), while
the next four define the segment address. For DOS only
the lowest 1MB selections can be used. Use the
F5=Previous and F6=Next keys to change the Memory
Location selection."