home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Black Box 4
/
BlackBox.cdr
/
editors
/
viet1p6.arj
/
README.1ST
< prev
next >
Wrap
Text File
|
1991-09-11
|
3KB
|
65 lines
Documentation for this package is included in the following
files:
MANUAL.DOC Brief description of the programs and files
VIET.DOC Manual for VIET.COM
VLASER.DOC Manual for VLASER.EXE
VMORE.DOC Manual for VMORE.EXE
DESIGN.DOC Manual for SCDESIGN.COM, PRDESIGN.COM and
LSDESIGN.COM
WHATSNEW.DOC Changes from VIET version 1.5 to 1.6
These files can be read using the batch command MAN. For
example, to read the VIET document, type: MAN VIET, then use the
space key to move forward, and "b" to move back, and "q" to quit.
The following procedure allows you to print out these files
for reference. First, convert these five files to VIET format by
executing the CONVERT batch command. This converts the five .DOC
files to five .VT files.
You can then print the five VT files on a Laserjet series
or compatible printer using VLASER (see the "About VLASER" screen
inside VLASER to determine which printers will work), or on a
dot-matrix printer using VIET (warning: printing all 5 files on a
dot-matrix printer may take hours).
Example: To print MANUAL.VT on a laser printer, type
VLASER MANUAL.VT
The following settings are suggested for VLASER:
Font name: Courier
Pitch: Elite
Left edge offset: 4.5 cm
Line spacing: 4mm
Start at page: first
End at page: last
First page number: 1 (see note below)
Top margin: 2.5 cm
Bottom margin: 2.5 cm
Print page number: yes
Page-number position: 11.3 cm
Note: you may want to concatenate the documents into a
single manual by setting the "First page number" to follow the
page number of the last page of the last document. For example,
if the last page number of MANUAL.VT was 5, you may want to set
this value to 6 for VIET.VT.
To print these files on a dot-matrix printer, the
suggested values for VIET (on 8.5" x 11" fan-fold paper) is
Top margin and Bottom margin : experiment to find the right
values for your printer (Bottom margin minus Top margin
should equal 54)
Page length = 66
Page number collumn = 32
Page numbering = yes
Starting page number = see note above
Page offset = experiment and find the right value for your
printer and paper feed.