59142 Please insert the %s disk into drive %c: or enter the full
59143 path for %s
59144 Choose source path
59145 Sophos
59146 Sweep95
59148 Select %APPNAME source folder:
59149 Select %APPNAME installation folder:
59150 Setup information file not found. Select source folder which contains this application setup files.
59151 Destination and source paths must differ.
59152 Please enter the full path for %s, which is shipped on the %s disk
59154 Select %APPNAME server folder:
59155 Select %APPNAME communications folder:
59156 An existing InterCheck configuration file defines a different communications folder to the one you have entered.\nDo you wish to use the communications folder specified in the existing configuration file?
59157 SWEEP
59158 SWEEP for Windows 95/98 Setup
59159 Setup Wizard
59160 Removal Wizard
59161 Not recognised timer tick identifier!
59162 Could not allocate copy file buffer memory
59163 Error copying files - initialisation
59164 Strange next disk dialog error!
59165 Cancel copy files on user request!
59166 Error creating file
59167 Error accessing file
59168 Error reading file
59169 Error writing file
59170 Shortcut SetPath failed!
59171 Shortcut SetDescription failed!
59172 Shortcut SetArguments failed!
59173 Could not open registry key for storing file info
59174 Could not create registry keys
59175 - Copy %APPNLIT installation files from:
59176 - Copy %APPNLIT installation files to server folder:
59177 - Save the following configuration options:
59178 - Install %APPNLIT to:
59179 - Upgrade %APPNLIT to version %APPVER in:
59180 - Install new copy of %APPNLIT version %APPVER to:
59181 - Remove any obsolete %APPNLIT components from the system
59182 - Create %APPNLIT shortcuts in the Start Menu
59183 Allow removal in Control Panel
59184 \n Add/Remove module
59185 Prevent removal in Control Panel
59186 \n Add/Remove module
59187 Enable Auto-upgrade
59188 Disable Auto-upgrade
59189 Shortcut save failed!
59190 The installation process cannot continue whilst\nSWEEP for Windows 95/98 is running.\n\nDo you wish to close SWEEP for Windows 95/98\nand continue the installation process?
59191 SWEEP for Windows 95/98
59192 Unable to close SWEEP for Windows 95/98.\n\nPlease close SWEEP for Windows 95/98 and\nrun the setup program again.
59193 Could not remove currently running SWEEP service.
59194 Could not install SWEEP service.
59195 Could not create required directories.
59196 Account does not exist. Please ensure that the account exists .
59197 Could not copy this DLL file to the system folder. An equivalent DLL might currently be in use.
59198 Closing and removing the existing %1 service
59199 Creating registry entries
59200 Creating %1 folder
59201 Examining files:\n%1
59202 Creating program manager icons
59203 Creating Taskbar shortcuts
59204 Installing and starting the %1 service
59205 You should be logged in as administrator to run this program.
59206 You must select at least one component.
59207 - Grant "Log on as Service" right to %1.
59208 Could not create InterCheck share.
59209 "Log on as service" right not assigned to %1.
59210 - Configure SWEEP to run on a workstation
59211 - Configure SWEEP to run as InterCheck server
59212 - Enable SWEEP to run as InterCheck client
59213 Could not start %1.
59214 There is no communications folder defined in the configuration file.\nUse default communications folder?
59215 There is no configuration file in the server folder.\nUse default communications folder?
59216 %1 is still running. The installation may not complete successfully.
59217 Drive which you have selected is a remote drive. Please select another destination.
59218 Drive type of the selected destination could not be determined. Please ensure that the drive is a local fixed drive.
59219 Drive type of the selected destination is not a fixed drive. Please ensure that the drive is a local fixed drive.
59220 Select InterCheck Server communications folder
59221 Please enter a valid communications folder
59222 Please enter a valid server folder
59223 Setup program could not restart the computer.
59224 Selected server folder does not exist.\nDo you wish to create it?
59225 Could not create server folder
59226 setup program is currently being used by another user.
59229 At least one application which is part of this package is still running. Please close the running applications.
59231 Shutting down %1 application
59236 SWEEP for Windows 95/98 installation completed successfully.
59237 The value range can be %1 to %2.
59240 Closing %1 front end applications.
59420 Upgrade to more recent version of SWEEP for Windows 95/98?
59421 Failed to start automatic upgrade.\nPlease run SETUP.EXE manually.\n\nSystem Error: %1
59422 This program requires Windows 95/98
59424 Install and enable stand-alone InterCheck
59425 No stand-alone InterCheck
59426 Immediate SWEEP on startup
59427 No immediate SWEEP on startup
59428 - Selected configuration options:
59429 InterCheck server folder:
59430 InterCheck comms folder:
59431 - Copy the following additional components to the server:
59432 - Install the following additional components:
59433 - Upgrade the following additional components:
59434 - Install new copies of the following additional components:
59435 SWEEP for Windows 95/98
59436 SWEEP for DOS
59437 InterCheck
59440 The following error occurred whilst attempting to activate a \nprevious instance of the setup application:\n\n%1\n\nPlease close any previous copies of setup that may be running.
59441 The following error occurred whilst attempting to create a shared memory map:\n\n%1\n\nPlease close any previous copies of setup that may be running.
59442 Unknown error %lu [0x%08X]
59443 System error modifying local InterCheck configuration file:\n%1
59444 Your system memory is running low. Please quit other applications and try running SOPHOS Setup again.
59456 WARNING: There is no communications folder defined. This configuration will disable centralized messaging by default.
59457 WARNING: The specified InterCheck server is not active. InterCheck messages will be queued until reactivation.
59458 WARNING: Selected communications folder does not exist, or is not available.
59472 Could not create destination folder.
59473 Selected destination folder does not exist.\nDo you wish to create it?
59474 sw95%04x.$$$
59475 You have insufficient rights to create files in the selected destination directory.
59476 There was a problem checking your rights to create files in the destination folder.\nYou may experience problems later during file copying.
59488 System error reading existing InterCheck configuration file:\n%1
59489 System error writing new InterCheck configuration file:\n%1
59490 You have insufficient rights to create a default InterCheck configuration file in the selected server folder.
59491 You have insufficient rights to write to the selected server folder.
59492 SWEEP for Windows 95/98 Setup program has been running on this machine for more than %1 minutes.\n\nDo you want to exit?
59493 This Setup program is for Windows 95/98 workstations only.
59494 <None>
59495 Selected InterCheck server communication directory is a local path.\n\nDo you want to select an equivalent share based communication directory?
59496 Selected InterCheck server directory is a local path.\n\nDo you want to select an equivalent share based server directory?
59497 Do you really want to exit?
59498 Setup could not find %1 in the destination directory. This file is necessary to complete the installation successfully. This installation session will be aborted.
59499 Windows will restart in %1!ld! seconds
59500 Please contact the Network Administrator immediately
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
