home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Spezial
/
SPEZIAL2_97.zip
/
SPEZIAL2_97.iso
/
ANWEND
/
TOOLS
/
CPRO_16
/
install.hlp
(
.txt
)
< prev
next >
Wrap
OS/2 Help File
|
1997-01-08
|
12KB
|
210 lines
ΓòÉΓòÉΓòÉ 1. Introduction ΓòÉΓòÉΓòÉ
Installation Program
Conversion Pro for OS/2 v1.6 and later versions now implement the цNstall
installation program by J. R. Kowalczyk. The install program (install.exe) will
create a directory on your disk of choice and copy all the required files to
that directory. The installation program also creates a desktop folder and
populates with the Conversion Pro object, the Calculator object, the TimePro
object, the LoanPro object, and the on-line User's Guide object.
Note: Please read!!! For reasons of space the run-time library file is not
included with the Conversion Pro archive- nor is it installed by the install program.
ΓòÉΓòÉΓòÉ 2. Installing for the first time ΓòÉΓòÉΓòÉ
To install Conversion Pro, follow these steps:
1. Examine the drive and directory in the Path entry field. The default is
C:\conpro16. This directory will be created and the required program files
will be copied there.
2. If you are not happy with the default installation to the C: drive, change
it by choosing another drive under the "Drive" drop-down list.
3. If you are not happy with the directory, or you want to place it as a
subdirectory to a another directory, select the new location in the
"Directory" drop-down list. You can always hand-edit the installation
directory in the "Path" text entry field. (If you want to just keep
everything where it is now, choose "Create desktop objects only").
4. When you are satisfied with the installation location, push the install
button at the bottom of the installation window.
5. The status of the installation is shown by the slider bar. If successful,
a dialog will pop-up to inform you the installation has completed.
6. Push the Exit button to close the installation program.
7. Conversion Pro desktop objects should be created automatically by the
installation program.
8. If Conversion Pro doesn't run, make sure that you have properly placed the
run-time library vrobj.dll in a directory on your LIBPATH statement in the
OS/2 config.sys file.
ΓòÉΓòÉΓòÉ 3. Target drive ΓòÉΓòÉΓòÉ
Selecting a hard drive to install to
The drive to install Conversion Pro to is selected by the drop-down list box
labled "Drive". You do not need to change this unless you wish to install
Conversion Pro on a drive different from the default C:
ΓòÉΓòÉΓòÉ 4. Directory list ΓòÉΓòÉΓòÉ
Choose another directory with the list box
The "Directory" list box contains entries of the directories on the drive
currently selected in the "Drive" drop-down list-box. You can select any
directory from this list and install the Conversion pro files there. Or, you
can select one of the directories shown and then add a subdirectory by typing
the preferred name in the "Path" entry field.
ΓòÉΓòÉΓòÉ 5. Path ΓòÉΓòÉΓòÉ
Where will Conversion Pro be installed?
The entry field labeled "Path" shows the current destination directory where
Conversion Pro will be installed. The default is C:\conpro16. You can change
by typing in a new path, or by using the "Drive" drop-down list and/or the
"Directory" list.
The Path field will always show where Conversion Pro will end, up regardless of
any previous selections made with the "Drive" or "Directory" lists.
ΓòÉΓòÉΓòÉ 6. Destination directory ΓòÉΓòÉΓòÉ
Choosing where to install the program
By default, the destination for installing Conversion Pro is C:\conpro16. If
you want to change this, do so by changing the drive letter in the "Drive"
drop-down list, and/or change the directory in the "Directory" drop-down list.
The new installation drive and/or directory will be reflected in the "Path"
text entry field.
You can also hand-edit the installation directory in the "Path" text entry field.
ΓòÉΓòÉΓòÉ 7. Create WPS objects only ΓòÉΓòÉΓòÉ
Using "the Create WPS object only" checkbox
If you unzipped the Conversion Pro *.zip archive into a desktop folder or a
directory on your drive, and want to leave the Conversion Pro files there,
check this option. The install program will not copy any files to any other
location.
Desktop objects will then created for the files in that folder or directory.
Note: This option is also useful if you lose or delete your desktop objects.
From the directory containing all the program files, just run the install
program again with this check box selected.
ΓòÉΓòÉΓòÉ 8. Needed files ΓòÉΓòÉΓòÉ
The install program needs the following files to properly install Conversion Pro:
o install.exe
o install.hlp
o install.dat
Don't mess with install.dat unless you know absolutely know what you are doing.
Otherwise, you could create unexpected results with the install program.
ΓòÉΓòÉΓòÉ 9. Redoing the installation ΓòÉΓòÉΓòÉ
If the installation failed or you want to put Conversion Pro somewhere else, do
the following:
1. Throw away (shred) any desktop objects that were created.
2. Re-run the installation program for the new destination directory.
3. Delete any other Conversion Pro directory and/or files that you copied to
your hard-drive. You do not have to reboot.
Note: Make sure the reason Conversion Pro is not working is due to a missing
vrobj.dll run-time library.
If only your desktop objects are missing, use the "Create WPS objects only"
function to remake them.
ΓòÉΓòÉΓòÉ 10. VROBJ.DLL ΓòÉΓòÉΓòÉ
Conversion Pro needs the vrobj.dll run-time library in order to run. This dll
is available free from the Watcom division of the PowerSoft Corp. which is in
turn owned by Sybase, Inc. Many smaller OS/2 apps require this dll, and most
BBS and ftp sites request it not be included with any archive in order to
prevent the redundancy of downloading the same dll over and over again. You
may already have it if you have installed certain OS/2 apps you may have downloaded.
The file is readily available from many ftp OS/2 sites. You can try the
Powersoft site at:
ftp.powersoft.com/pub/vxrexx/maintfls
or point your browser to the following URL:
http://www.powersoft.com/services/support/vxrexx/files/vxrex
x_maint.html
You need level "2.1c" or later. (e.g., vrobj21c.zip).
Warning: Do NOT get level 2.1a or 2.1b of this dll. You must use version 2.1c
or later. If 2.1d may not work as well as 2.1c for some users (depending on
fixpak level, OS/2 version, etc. Experimentation may be required.
From Compuserve type:
GO PSLANG
and then get to the VX-REXX library. Version 2.1d of the VX-REXX run-time DLL
should be there.
Once you have it, it needs to be copied to a directory on your LIBPATH
statement in the OS/2 config.sys file. I suggest X:\OS2\DLL as a good place to
put it (where X: is the drive where you have OS/2 installed). Alternatively,
you can put the run-time in the \conpro16 directory and add that directory to
your LIBPATH statement.
ΓòÉΓòÉΓòÉ 11. Logging ΓòÉΓòÉΓòÉ
The results of the installation are saved to a logging file in the working
directory. The file is named install.log
ΓòÉΓòÉΓòÉ 12. Copyright ΓòÉΓòÉΓòÉ
Conversion Pro and associated files including this help file are Copyright (C)
1995, 1997 by:
Jon F. Kaminsky
NEGC Software
2522 North Proctor Street, Suite 135
Tacoma, WA 98406
tech support by e-mail: negcjfk@ibm.net
The цNstall installation program (minus this help file) is Copyright (C) 1996 by:
Janosch R. Kowalczyk
Oberwaldstr. 42
63538 Groсkrotzenburg
Germany
Tel: +49-6186/201676
Fax: +49-6186/470
Compuserve: 101572.2160@compuserve.com