What the Doctor Required - The Freshest December/December.iso/drivers/modem/wdlboca1/install.dat

Text File | 1996-02-12 | 10.7 KB | 419 lines

//
// INSTALL Help Text: Message by Message
//

#MESSAGE = 1
TITLE="Welcome to Install!"
LINES=9x42
$
INSTALL is a complete Installation and
test program for the SE14SRS/SE34SRS.
A mouse is recommended. If you do not
have a mouse, use the following keys:
  [TAB]       to move to option
  [ENTER]     to execute option
  []        to select option
  [F3]        to exit the installation
  [ALT+Key]   to activate a button
$

#MESSAGE = 2
TITLE="Installation Options"
LINES=6x52
$
This Installation will do the following:
- Install Drivers and Utilities for DOS and Windows.
- Configure and Test the sound card.
- Install and Setup CD-ROM Software Drivers.
- Display up-to-date information (readme.txt)
- Install a volume control for Windows.
$

#MESSAGE = 20
TITLE="Test & Configuration Options"
LINES=7x60
$
This Test and Configuration program will:
- Perform 8 bit, 16 bit and FM Music Sound Tests
- Allow you to change volume settings
- Change CD-ROM settings and update system files
- Allow you to configure settings. If you have
  Plug and Play, the card will configure automatically.
- Display Information file README.TXT
$

#MESSAGE = 3
TITLE="User Directory Selection"
LINES=4x48
$
Select the drive and enter the directory where
you would like to install your software into.
The required and available disk space for the
complete installation is listed below.
$

#MESSAGE = 4
TITLE="Microsoft Windows Directory Selection"
LINES=5x48
$
INSTALLER needs to know where your Microsoft
Windows directory is. If you do not have
Microsoft Windows installed or you do not want
to install the device drivers and applications
for Microsoft Windows, select [NONE].
$

#MESSAGE = 5
TITLE="CD-ROM Selection"
LINES=4x44
$
The sound card can be used as a CD-ROM
interface board.  Select your CD-ROM drive
type or select [None] if you do not want to
connect a CD-ROM drive to the sound card.
$

#MESSAGE = 6
TITLE="CD-ROM Default Settings"
LINES=4x44
$
Select [OK] if you want to accept the
default settings for your CD-ROM.
Select [CUSTOMIZE] if you want to customize
the I/O address, Interrupt and DMA channel.
$

#MESSAGE = 7
TITLE="CD-ROM Harware Configuration"
LINES=3x48
$
Select [OK] if you want to accept the selected
settings for your CD-ROM.  Select [DEFAULTS]
if you want to reset to the default settings.
$

#MESSAGE = 8
TITLE="File Copy Confirmation"
LINES=4x45
$
INSTALLER is going to start copying files to
your hard disk. Select [OK] to continue if
the User and Windows Directory are correct.
Select [CHANGE] if you want to make a change.
$

#MESSAGE = 11
TITLE="SOUND TEST"
LINES=3x36
$
Select a Sound Test option below.
Select [DONE] when test is done and
go back to the previous Window.
$

#MESSAGE = 12
TITLE="SOUND TEST"
LINES=6x46
$
Sound test can not be run now.
The sound card's audio device resources
are not available or have been changed.
The new audio configuration will
not take effect until it is ACCEPTED.
Please run sound test at a later time.
$

#MESSAGE = 13
TITLE="Select MSCDEX.EXE"
LINES=7x44
$
To use your CD-ROM drive, you need a CD-ROM
utility 'MSCDEX.EXE' from Microsoft. After
scanning your Disk, INSTALL found MSCDEX(s)
and listed them below. MSCDEX is DOS version
dependent. Please select the ONE which is
compatible with your DOS version. The best
choice is the ONE that came with your DOS.
$

#MESSAGE = 14
TITLE="No MSCDEX.EXE in your System"
LINES=10x50
$
To use your CD-ROM Drive, you need the program
MSCDEX.EXE from    Microsoft. INSTALL has scanned
your hard disk(s) and did not find one. Besides,
your DOS version is very old. We don't have a
MSCDEX version good for you. INSTALL has inserted
a MSCDEX line with leading 'REM' into your
AUTOEXEC.BAT anyway. If you locate a MSCDEX file
later, please copy it into the SOUNDEXP directory
and remove the REMark from the MSCDEX line.
$

#MESSAGE = 15
TITLE="System Files Update"
LINES=6x48
$
INSTALLER is going to update your DOS
system files CONFIG.SYS and AUTOEXEC.BAT.
Select [OK] if you want INSTALLER to make the
changes NOW or select [BACKUP ONLY] if you
want INSTALLER only to save the changes to
sample files CONFIG.MAD and AUTOEXEC.MAD.
$

#MESSAGE = 16
TITLE="Windows System Files Update"
LINES=4x46
$
INSTALLER is going to update your WINDOWS
system files SYSTEM.INI and MIDIMAP.CFG.
Select [OK] if you want INSTALLER to make the
changes NOW or select [BACKUP ONLY] if you
want INSTALLER only to save the changes to
sample files SYSTEM.MAD and MIDIMAP.MAD.
$

#MESSAGE = 17
TITLE="Windows Sound Application Installation"
LINES=5x46
$

INSTALLER has also installed Windows Sound
Applications into your system. The Sound
Applications Group and its Applet Icons will
show on your screen when you run Windows the
very next time.
$


#MESSAGE = 18
TITLE="Installation Successful"
LINES=10x46
$
Installer has completed successfully. You
must reboot your system in order to run
sound applications. Select [REBOOT] now to
reboot or select [EXIT TO DOS] to return to
DOS. If selecting [REBOOT], please first
remove any diskettes from your floppy drives.
Type "SNDINIT" at the DOS prompt to test and
reconfigure your Sound Card settings when
necessary at a later time.
Thank you for purchasing the SE34SRS/SE14SRS.
$


#MESSAGE = 19
TITLE="Not Enough Conventional Memory Detected"
LINES=10x56
$
Your system has LESS THAN 500 KBytes of recommended
conventional memory. To run DOS games, you need at
least the recommended size above. It is also
recommended that this amount of memory be available
in order to successfully run this program. You can
increase your memory either by running a memory maker
program that comes with your operating system; or
remove any memory resident programs that resides in
your system memory. Do you wish to Exit this program
and increase your system memory now?
$


#MESSAGE = 21
TITLE="Please Wait..."
LINES=6x46
$
The next screen will ask you for the type
of CD-ROM drive (if any) in your system.
If your CD-ROM drive uses its own interface
card, then select 'none'. After the CD-ROM
screen is the configuration screen. The HELP
button has answers to most common questions.
$

#MESSAGE = 22
TITLE="Welcome to the SNDINIT Program"
LINES=9x42
$
SNDINIT is a Testing and Configuration
Program for the SE14SRS/SE34SRS.
A mouse is recommended. If you do not
have a mouse, use the following keys:
  [TAB]       to move to option
  [ENTER]     to execute option
  []        to select option
  [F3]        to exit the program
  [ALT+Key]   to activate a button
$

#MESSAGE = 23
TITLE="CD-ROM driver Installation"
LINES=6x48
$
Installer does not have the CD-ROM driver for
your CD-ROM. Installer will only update the
the CD-ROM settings of the Sound Card in
CONFIG.SYS. Please run the installation program
from your CD-ROM manufacturer to install the
CD-ROM driver and MSCDEX program.
$

#MESSAGE = 24
TITLE="Reboot System"
LINES=5x49
$
Your CONFIG.SYS has been updated according to
the new settings for your CD-ROM. You must REBOOT
your computer in order for the new settings to
take effect. Select [OK] to REBOOT your computer.
Select [EXIT] to return to DOS.
$

#MESSAGE = 25
TITLE="Reboot System"
LINES=4x46
$
Your BLASTER Environment Variable is updated
in your AUTOEXEC.BAT file. Some DOS games may
reference this variable for initialization
purposes. Do you wish to REBOOT your computer?
$

#MESSAGE = 26
TITLE="Error!"
LINES=2x48
$
Hardware Error Detected! Please reconfigure your
Sound Card's I/O Port, IRQ, or DMA settings.
$

#MESSAGE = 27
TITLE="Error!"
LINES=4x45
$
You have selected the same I/O Port setting
between your Audio, CD-ROM, and MPU-401
device. This will cause conflict on your
system. Please reselect a different I/O Port.
$

#MESSAGE = 28
TITLE="Error!"
LINES=4x47
$
You have selected the same IRQ settings between
your Audio, CD-ROM, Modem, and MPU-401 device.
This will cause conflict on your system. Please
reselect a different IRQ setting.
$

#MESSAGE = 29
TITLE="Error!"
LINES=4x47
$
You have selected the same DMA settings between
your Audio, and CD-ROM device. This will cause
conflict on your system. Please reselect a
different DMA setting.
$

#MESSAGE = 30
TITLE="Warning!"
LINES=3x48
$
You have selected Windows Sound System using IRQ
5.  Some DOS games that support Windows Sound
System may not work with this option.
$

#MESSAGE = 31
TITLE="CD-ROM driver Installation"
LINES=7x48
$
The CD-ROM you selected can not be set up at
this time. The IDE CD-ROM device's required
resources, I/O address 170, 376 and IRQ 15 is
not avaiable in your system. Please check if
your system have a secondary CD-ROM controller
or another device that uses resource that may
conflict with the sound card CD-ROM interface.
$

#MESSAGE = 32
TITLE="PNP Resource Update"
LINES=5x48
$
Your sound card's PNP resource has been changed.
Select [OK] to update system PNP configuration.
The new settings for your sound card will not
be effective until the system is rebooted.
$

#MESSAGE = 33
TITLE="PNP Resource Update"
LINES=6x47
$
Your CONFIG.SYS has been updated according to
the new settings for your CD-ROM.  Your sound
card PNP resource has also been changed.
Select [OK] to update system PNP configuration.
The new settings for your sound card will not
be effective until the system is rebooted.
$

#MESSAGE = 34
TITLE="Installation Successful"
LINES=10x48
$
Installer has completed successfully. Your
sound card's PNP resource has been updated
during the installation. You must reboot
your system in order to run sound applications.
Select [REBOOT] now to reboot. Please first
remove any diskettes from your floppy drives.
Type "SNDINIT" at the DOS prompt to test and
reconfigure your Sound Card settings when
necessary at a later time.
Thank you for selecting the SE14SRS/SE34SRS!
$

#MESSAGE = 35
TITLE="Audio device not enabled"
LINES=6x48
$
There is no proper audio resources assigned for
your sound card. To play DOS games or to run
Audio applications, resources must be assigned
to the Audio device. Please check your Audio
configuration to see if there is any conflict
with other devices on your system.
$

#MESSAGE = 36
TITLE="Modem Interface Configuration"
LINES=6x48
$
SE14SRS/SE34SRS
Modem Configuration. Select the I/O
Address for the desired COM port.

    COM1=3F8       COM2=2F8
    COM3=3E8       COM4=2E8
$

#MESSAGE = 37
TITLE="Modem Interface Configuration"
LINES=6x48
$
SE14SRS/SE34SRS
Modem Configuration. Select the I/O
Address for the desired COM port.

    COM1=3F8       COM2=2F8
    COM3=3E8       COM4=2E8
$