home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Encyclopedia 96-1
/
novell-nsepro-1996-1-cd2.iso
/
download
/
netware
/
drvkit.exe
/
LANDRV
/
ACER
/
286DRV
/
5220.TXT
next >
Wrap
Text File
|
1990-08-08
|
5KB
|
113 lines
Title: Readme File for Acer 5220on NetWare 286 series
1. Table of Contents
This Readme File contains the information for users to use Acer 5220
8-bits Ethernet card on NetWare 286 V2.1X product series. It contains
the following files:
File Name Size in Bytes Date Stamp Time Stamp
-------------------------------------------------------------
5220OS.LAN 1311 5-05-89 2:15a
5220SH.LAN 1286 5-05-89 2:15a
A5220DRV.OBJ 7489 5-05-89 2:15a
B5220DRV.OBJ 7489 5-05-89 2:15a
C5220DRV.OBJ 7489 5-05-89 2:15a
D5220DRV.OBJ 7489 5-05-89 2:15a
E5220SH.OBJ 8086 5-05-89 2:15a
2. NetWare Setup Steps
a. Configuring the LAN Adapter
Follow the steps and, if necessary, refer to Acer 5220
Ethernet Card User's Manual Chapter 4 for easy installation.
1. Verify the SW1 setting for I/O and memory base address
configuration.If the memory is not used, set SW1-1 and SW1-2 to ON.
2. If the memory space is used, set jumper group 2 (J08 - J09)
to the proper configuration.
3. Set the jumper plug to the proper jumper position on the
interrupt channel configuration block J10 - J15.
4. Check the network interface used in the network system If thick
Ethernet is used, close all group 1 jumpers J00 - J07 in THICK
position. If thin Ethernet is used, close all group 1 jumpers in
THIN position.
5. Set J22 jumper to the proper position for selecting Advanced mode
or NE-1000 compatible mode.
b. Installing the driver files for the card
1. Copy the 5220SH.LAN file to the SHGEN-1 diskette for "floppy
disk" method or to the SHGEN-1 sub-directory if you are using
"harddisk" or "network" method. It is a Shell driver description
file.
2. Copy the Operating System driver description file 5220OS.LAN to
the AUXGEN diskette for "floppy disk" method or to the AUXGEN
sub-directory if you are using "harddisk" or "network" method.
But if you are generating an External Bridge, the 5220OS.LAN file
should be copied to the BRGEN-1 diskette or the BRGEN-1
sub-directory.
3. For the "floppy disk" method a blank disk needs to be formattted
and labeled. Use the DOS LABEL command to label the diskette
as LAN_DRV_889. If the "harddisk" or "network" method is being
used then a subdirectory under the NETWARE directory must be
created. Use the DOS MKDIR command to create the LAN_DRV_.889
subdirectory. Copy the *.OBJ files to either the labeled diskette
or subdirectory depending on which method is being used.
4. Run NETGEN and select the correct driver from the list of LAN adapter
options to generate the file server operating system.
5. Run SHGEN and select the correct driver from the list of LAN adapter
options to generate the workstation shell.
6. Run BRGEN and select the correct driver from the list of LAN adapter
options to generate the external bridge software.
3. Customer Support
Contact your local Acer network provider or call (800) NET-ACER within
the U.S..
4. Driver Updates and Installation Manuals
You can get the updated drivers and manuals through your local distributors
or AcerServe Electronic Customer Service System.
5. Acer 5220 hardware setting quick reference:
a. Bit-Mapped Options for DIP Switchblock SW1
Switch Default
Number Function Setting
-------------------------------------------------
01 Memory segment address A17 1
02 Memory segment address A16 1
03 Memory segment address A15 0
04 Memory segment address A14 0
05 Memory segment address A13 0
06 I/O base address A09 1
07 I/O base address A08 0
08 I/O base address A07 0
09 I/O base address A06 1
10 I/O base address A05 1
Default settings are I/O base address 260h and disable PROM memory segment
address.
b. Interrupt request channel jumper setting
Set the shorting plug in the proper position when the desired interrupt
channel is selected.
Jumper Number Interrupt Channel
--------------------------------------------
JP10 IRQ2 (default setting)
JP11 IRQ3
JP12 IRQ4
JP13 IRQ5
JP14 IRQ6
JP15 IRQ7