home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Share Gallery 1
/
share_gal_1.zip
/
share_gal_1
/
UT
/
UT043.ZIP
/
RSTPRINT.DOC
< prev
next >
Wrap
Text File
|
1989-08-21
|
11KB
|
321 lines
RstPrint.DOC
RstPrint.EXE
Copyright 1988 by Harry P Calevas
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM;
: Disk Copyright Information :
LMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM9
: Programs and Documents in this file copyright by :
: :
: DDDDDD | Harry P. Calevas | DDDDDD :
: :
: DDDDDD | P O Box 830 | DDDDDD :
: :
: DDDDDD | Trenton Ga | DDDDDD :
: :
: DDDDDD | 30752 | DDDDDD :
: :
: Day Time Phone Number (404 ) 657-5484___________________ :
: :
LMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM9
What is RstPrint
--------------
A simple printer reset program. It does no more than reset the
printer on ALL PARALLEL PORTS on the system . No check for any other
operation. Printer does not have to be ready, online or even on, this
program does not wait for printer .For all other programs I have seen
the printer must be ready, not this one, but if on, it should be ready
after the reset! If printer is on, offline or on line and on a parallel
printer port, it should do a poweron reset, just as if it had been
powered off and back on(!) with all the same results!!. Use care with
spoolers!
A power on Resets Means That the printer will be reset to ITS Default
values (including set at top of form in the center of the page if that
is where it was when reset! This program was written to reset the
printer back to its default settings after doing some fancy printing.
It does and, if spooling, right in the middle of the spooled printout.
Version 2 corrections
Now rstprint can be used to reset only one printer at a time from the
command line . The commands Are Rstprint {printer port Number} .
Printer Port Numbers Are shown on the screen when Rstprint is run
without options, Use the one that resets the printer you want to.
Also Rstprint Can be used with a Spooler Most Of the Time now.That
Printer should Not Reset and the screen should show that.!
using the command line forces a reset to the port selected even if it
in not installed or is spooling
Version 2 Has miscellaneous other corrections .
DISCLAIMER
In no event will I, Harry P. Calevas, (The Author) be liable to you for
any damages,including any lost profits, lost savings or other
incidental or consequential damages arising out of the use of or
inability to use these programs, even if The Author has been advised of
the possibility of such damages, or for any claim by any other party.
THIS SYSTEM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THIS SYSTEM IS WITH
YOU. SHOULD THE SYSTEM PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF
ALL NECESSARY SERVICING, REPAIR AND CORRECTION.
This program file(s) may only be distributed as on the original
diskette. Such duplication and distribution is authorized without
compensation (except for duplication costs and diskettes) as long as
the diskette is a duplicate of the original diskette. All other
distribution is strictly prohibited.
I suggest that you make a copy of the original diskette before you get
started. the diskette may only be distributed if the diskette is a
duplicate of the original diskette.
The definition of the distribution diskette is a diskette
that is an exact duplicate of the diskette as it was shipped
________________________________________________________________
________________________________________________________________
Please note the following:
This program was written for me.It was written to do something I needed
to do! It may or may not work for You. But I have no way of knowing
that unless you drop me a letter and till me so. I will try to fix all
problems I find out about ,if you send me enough information to do so.
For reference the following is my system configuration: note that I
have drives a: to j: !! Please Feel free to write or call (If You Have
to money to Spend! Almost any time. There Is No One here to answer
Except Me AT Present!) Thanks.!
XT compatible 640 k mem 2- printer ports 2- serial ports
2- 360 kb diskettes 1- 1.2meg diskette (driver controlled)
Clock and Game Ports (not used At present)
2- Okidata 83a printers (1 with Pc-Writer mod )
Compati card diskette controller with Drivers
and 2 HD/Standard 5 1/2 drives 360k/1.2m
and 2 HD/Standard 3 1/2 drives 720k/1.44m
1- Tape Backup System (drivers Installed)
2- 20 mb hard disks
Use at your OWN risk ,no guarantees!
just type (drive:) RstPrint to run.
Registering RstPrint
------------------------
RstPrint is distributed under the Shareware concept. This makes it
available for anyone to try without obligation. If you decide it is useful and
want to keep it, I ask that you register your use of it. This will allow for
continued support and maintenance of the program and will help to encourage that
more quality software be made available through this channel. I require all
corporate and government users of this utility register their copies.
To register the program, $15.00 is requested.
Send registration requests to:
Harry P Calevas
P.O. Box 830
Trenton Ga 30752
The registration charge is a one time fee that entitles you to future
versions of the product for the next 2 years for a disk fee of $5.00. Updates
after 2 years will be based on program value at that time. Registration is for
one person or group on one machine at a time!
If You Received this program from a bulleten board System it should have
been an archive file , please be kind enough to upload it to another Bulleten
board system at your first chance. Give Others a chance to try it out. Thanks
Following is a form that may be used to register RstPrint
Please Register RstPrint to the following person. We will use ____
copies of the program and have enclosed $____ for each copy to be used.
**************************************************************
___ Registration only .............................. $15.00
___ Update of RstPrint disk (if updated) (call) ADD $5.00
**************************************************************
Name: __________________________________________________
Company: _______________________________________________
Address: _______________________________________________
_______________________________________________
City: ______________________________ State: ___________
Zip: ______________________
Please register this software under the following name:
____________________________________________________
Send to:
Harry P Calevas
P.O. Box 830
Trenton Ga 30752
404-657-5484
Problems and Maintenance
------------------------
I welcome all comments or enhancement suggestions. Please document each
item clearly and provide printed examples if possible. Please be sure to
include this form with all requests, it will help to make sure we can provide
you with the best possible service.
Name: __________________________________________________________
Company: _______________________________________________________
Address: _______________________________________________________
_______________________________________________________
City: __________________________________ State: _______________
Zip: ______________________________
Telephone: _______ / ________________________ (Home / Work)
Date: _________________________
Description of problem or enhancement:
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
Suggested solution:
________________________________________________________________
________________________________________________________________
______________________________________________
__________________________________________________________