8324 Please go to the printer characterization dialog box and pick a name.
8325 Please go to the printer calibration dialog box and pick a name.
8326 Please go to the scanner file dialog box and either pick a name or create a scanner profile.
8327 Please check your Corel COLOR directory.
8328 The device <%s, %s> is already defined in the device list, Do you want to overwrite it?
8329 Color Manager : Warning !
8330 Invalid Profile %s
8333 Do you want to remove the device <%s,%s>?
8334 Do you want to remove the manufacturer %s (All manufacturer models will be deleted)?
8335 Do you want to remove the system color profile %s?
8336 Do you want to label each square of the Test Pattern with a number? (Select No if using scanner method)
8337 A calibrated scanner is needed to perform color measurements automatically; Please go back to scanner calibration and select a scanner.
8338 Cannot copy to file %s. Please check that the drive is not full and that the disk is not write protected.
8339 Generic files are missing from your Color directory. Please reinstall the Color Manager Wizard.
8340 Generating Scanner Profile...
8341 Generating Monitor Profile...
8342 Generating Printer Test Pattern...
8343 Measuring Colors...
8344 Generating Printer Profile...
8345 Generating Printer Circuits...
8346 Generating Scanner Circuit...
8347 Generating System Color Profile...
8348 Do you want to Exit the Color Manager?
8349 The current path is invalid
8350 Corel COLOR MANAGER 6.0
8351 ClrWizardClass
8352 Corel Color Manager
8353 When the System Profile is complete, you will return to your application.
8354 When the System Profile is complete, you will return to Windows.
8355 Zoom...
8356 Color Calibration
8357 SystemColorProfile
8358 Write error: please check your temp directory.
8359 You accurately selected the four reference marks
8360 You scanned the entire image, including the four white reference marks and the entire grayscale along the bottom
8361 You selected a reference file corresponding to the scanned target
8362 The values you selected for the monitor characteristics are in a reasonable range
8363 You accurately selected the four reference marks; also make sure that you scanned the entire image, including the four white reference marks
8364 The image counts 504 colors; determine if the CMYK colorants of your printer are individually controlled
8365 The image counts 270 colors
8366 Your scanner has been properly calibrated, and the four reference marks on the scanner target have been accurately selected
8367 Your measurement file contains 504 color measurements in XYZ100 format
8368 Your measurement file contains 270 color measurements in XYZ100 format
8369 The CMYK colorants of your printer may be individually controlled
8370 The System Color Profile %s will be the default for all Corel suite applications
8371 Do you want to stop the Color Profile Generation?
8372 to
8373 Printing...
8374 Initializing color space
8375 Image Orientation...
8448 Manufacturer and Model:
8449 Enter the Manufacturer and Model Name:
8450 Finish
8451 Next >
8464 Name and Description of the selected System Profile
8465 Enter a Name and a Description for the System Profile.
8481 Align this point with the top left corner
8482 Align this point with the bottom left corner
8483 Align this point with the top right corner
8484 Align this point with the bottom right corner
8485 The Scanner Profile %s has an Invalid Name
8486 Cannot find the scanner profile %s. Either check the directory %s, regenerate the file %s through the scanner calibration process, or select a different scanner profile.
8487 Cannot find the generic scanner profile %s. Either check the directory %s, select an existing scanner, or reinstall this product.
8488 Cannot find the data reference file %s.
8496 Chromaticity
8497 White Point
8498 Custom...
8499 Flourescent (Three-Band) 4100░K
8500 Cool White Fluorescent 4300░K
8501 Std. Illuminant B 4874░K
8502 Std. Illuminant D(50) 5000░K
8503 Xenon 5290░K
8504 Paper White Point 5500░K
8505 Xenon Camera Flash 6000░K
8506 Metal halide Mercury 6430░K
8507 Average Daylight 6500░K
8508 North Skylight 7500░K
8509 High Dynamic Range 9300░K
8510 Custom
8511 Barco
8512 Hitachi EBU
8513 Hitachi/Ikegami
8514 NTSC
8515 Radius Pivot
8516 Trinitron
8517 Custom...
8518 Low
8519 Medium
8520 High
8528 Measure the CIE XYZ100 values of each palette rectangle from 1 to %d (please refer to the test pattern file you have have just printed), and create a measurement file (%s) in the Color directory (%s).
8529 When ready, click 'Done' and select the new %s file.
8530 No measurement file has been found in the color directory %s.
8531 The measurement file %s does not exist. Please select or generate a measurement file.
8532 Custom
8533 None
8534 Light
8535 Medium
8536 Heavy
8537 Maximum
8538 A measurement file will be automatically generated from the printer target image; this file will be stored in your color directory.
8539 Type the name of the color measurement file. If you don't know the name, click Browse to view available files.
8544 A:\
8545 The specified location does not contain calibration information
8546 Note: the following list shows the %s information files already defined in the Color directory. You can either add %s to an existing file or create a new file.
8547 Monitor
8548 Scanner
8549 Printer
8550 This directory does not contain the information file
8552 Select information file path
8561 %s is not a valid Color Manager system file.
8562 %s is an incorrect version.
8576 OK
8577 File name is bad: check name, directory and extension of file.
8578 The manufacturer does not match the information file.
8579 Cannot open file %s.
8580 Cannot write to file %s.
8581 Not Enough Memory, Please close some applications and try again.
8582 Bad file format or values in %s.
8583 General error.
8584 Incorrect file format or Bad values in %s.
8585 Cannot find device in the information file %s.
8586 The selected information file is defined for another type of device.
8587 Cannot delete the file %s
8588 Unable to update %s, file is read only.
8589 Not enough disk space, or scanning error.
8590 The required %s-%s is already defined in %s; Do you want to replace the existing device profile with the new one?