2 Select an installation mode for the '%s' driver.
4 Copying files...
5 Updating files...
6 Updating '%s'
7 Printer '%s' was successfully installed.
8 Printer '%s' was successfully updated.
9 The install procedure for printer '%s' failed or was cancelled.
10 The update procedure for printer '%s' failed or was cancelled.
11 Finish
12 Close
13 Status:
14 Printer installation can take several minutes, please wait...
15 Install
16 Cancel
17 Initialising driver...
18 Initialising printer...
19 Installing port monitor...
20 Configuring printer...
21 Cleaning up...
22 Installing...
23 Updating...
24 Printer:
31 Welcome to the HP Universal Printing Setup Wizard
32 This wizard will install the '%s' driver. Before continuing, please read the License Agreement.
33 Do you accept the terms of the License Agreement?
34 Click Yes to accept and continue. If you select No , setup will close.
35 Yes
36 No
37 Installation Mode
39 Setup can install the '%s' driver in either traditional mode or dynamic mode.
40 Traditional Mode - Creates a regular printer object in your Printers folder. With this mode, you select the destination printer now, and it remains fixed.
41 Dynamic Mode - Creates a special Universal Printer object in your Printers folder. With this mode, you can dynamically select your destination printer each time you print.
42 Select an installation mode, then click Install .
43 Traditional mode
44 Dynamic mode
45 < Back
46 Printer installation complete. Click Finish to close Setup.
125 44
126 ===============================================================================================\n||||||||||||||||||||||||||||| BEGIN INSTALL.EXE /? |||||||||||||||||||||||||||||||||||\n===============================================================================================
127 Installer Operation
128 /q Quiet mode, no prompts
129 /npf Do not open the Printers folder on completion
130 /sc Simple confirmation
131 /h Hides the install dialog box, must be used with /q
132 /sm<Port> Creates a static printer instance bound to the specified <Port>, e.g. /sm\\server\printer, /smhostname, /sm15.62.98.111
133 /m - driver version name need not be specified while installation. The /sm is required. Cannot be used with /sm\server\printer. The /n is optional.
134 /n"<Printer Name>" Uses the specified name as the name of the printer, e.g. /n"HP LaserJet 8150"
135 /ni Does not perform the printer install, only processes other install options
136 /aml<"NAME","URL"> Adds a new Managed List Name using the specified URL, e.g. '/aml"My Server","http://mywebserver"' or '/aml"My Printers","\\myprinters\printerlist\printerlist.xml"'
137 /nd Does not set the printer as the default
138 /tm Installs the printer in Traditional Mode
139 /dm Installs the printer in Dynamic Mode
140 /u Use the existing printer driver if it's already installed
141 /gcfm"<cfm file>" - Specify DCU configuration file to be utilized for new printer installation, e.g. /gcfm"c:\temp\duplex.cfm"
142 /qcomname"<snmp community name>" creates a queue specific snmp community name.
143 /gcomname"<snmp community name>" creates a global snmp community name that is used by all queues.
144 /dgst - Disables the Services tab globally in the HP UPD for all print queues.
145 /s - specify virtual node for cluster install for e.g. /s"\\virtualspooler" should be run from the node having administrative privileges. Where "virtualspooler" is the virtual spooler where the queue is getting installed.
148 /empa - Enables the MPA functionality for the current user. Default MPA functionality will be retrieved from managed-print. If you want to enable MPA functionality using a computer other than managed-print see the /policy option.
149 /gempa - e.g. install.exe /gempa - This MPA policy enabling switch enables MPA policy management for ALL UPD users on the PC instead of just the current user switch /empa. When using this switch, the default sever name running MPA is still assumed to be called "Managed-Print". Using /gempa, instead of /empa will ensure that all users will be using the MPA managed UPD. If your MPA server is on a PC with a name other than "managed-Print", then please refer to the /gpolicy or /policy command options.
150 /dmpa - Disables MPA functionality for the current user.
151 /pqdmpa - Disables MPA support only for the current printer being installed. This allows a specific queue to be excluded from MPA policy management while the rest of the UPD printers do use MPA.
152 /policy - e.g. /policy"mympa.boi.hp.com" - The /policy command line option is used to enable MPA support for the current user and to specify the MPA server name or URL to use to make the policy query. A company might want to use a different MPA server for different regions or locations, so an admin could specify the MPA policy server name to use with this option. The name used can be an IP address, a computer name or the full http URL to use. Some other examples of these types include: /policy"15.5.125.5", /policy"companyA-USA", /policy"http://companyA/mpa-redirector"
153 /gpolicy - e.g. /gpolicy"mympa.boi.hp.com" - The /gpolicy command (global policy) is similar to the /policy command where it will enable policy management for the UPD driver for MPA software. The difference is that UPD policy management will now be enabled for all users on the PC instead of the current user during installation. In the scenario where multiple users might use a PC you can now set this global policy switch. When using this /gpolicy or /policy switch you will enter the computer name, IP address, or full http URL of the server that is running the MPA software. Some other examples of these types include: /gpolicy"15.5.125.5", /gpolicy"companyA-USA", /gpolicy"http://companyA/mpa-redirector"
154 /mppqs - e.g. mppqs"locale=USA&group=<groupname>" - This option is used to specify additional MPA http query string parameters. It is rarely used today because the /policy option allows for full URL specification including URI parameters.
155 /pqdads - Disables ADS support only for the current print queue.
156 /ru Restricted user mode, only display HP Managed Printer Lists
158 Obsolete Switches: The following options are depreciated in the installer and no longer supported. Like functionality is available within other UPD tools.
159 /rml"<Managed List Name>" Removes a managed list added previously
160 /eads - Enables Active Directory Services (ADS) support within the UPD for the current user. When ADS is enabled for a UPD user, the behavior of the UPD is controlled via Active Directory templates specifically designed for the UPD.
161 /dads - Disables ADS support for the current user.
162 /geads - e.g. install.exe /geads - This switch is similar to the /eads switch in that policy management is enabled through the UPD Active Directory Template via Group Policy Objects, only it will enable policy management for all UPD users on this PC, instead of the current user at the time of installation.
163 /dst Disables the Services Tab in the HP Universal Print Driver
164 /dod Disables the Online Diagnostics option on the Services Tab in the HP Universal Print Driver
165 /dos Disables the Online Support option on the Services Tab in the HP Universal Print Driver
166 /dpm Disables the Online Product Manual option on the Services Tab in the HP Universal Print Driver
167 /ddu Disables the Online Driver Updates option on the Services Tab in the HP Universal Print Driver
168 /dso Disables the Online Supplies Ordering option on the Services Tab in the HP Universal Print Driver
169 /dssnp Disables the Status Notification Popup for the currently selected printer
170 /gdssnp Disables the Status Notification Popup for all printers
171 /pfecono=[0=driver default or 1=on or 101=on and locked] The economode feature will be set appropriately in the Printing Preferences UI.
172 /pfduplex=[0=driver default or 1=on or 2=Flip Pages Up is on or 101=on and locked or 102=Flip Pages Up is on and locked] The duplex feature will be set appropriately in the Printing Preferences UI.
173 /pfpjob=[0=driver default or 1=Proof and Hold on or 2=Personal Job with Optional PIN on or 3=Quick Copy on or 4=Stored Job with Optional PIN on or 5=Stored Job with Required PIN or 6=Personal Job with Required PIN or 101=Proof and Hold on and locked or 102=Personal Job with optional PIN on and locked or 103=Quick Copy on and locked or 104=Stored Job with optional PIN on and locked or 105=Stored Job with Required PIN on and locked or 106=Personal Job with Required PIN and locked]. NOTE: With values 5, 6, 105 or 106 PIN is required. With values 2, 4, 102 or 104 PIN is optional.
174 /pfpjpin=<can be any 4 digit value: 0000, 0140, ..., 9999> - Only used when /pfpjob is set to 2, 4, 5, 6, 102, 104, 105 or 106.
175 /pfelqac=[0=driver default or 1=Professional or 2=General Office or 3=Monochrome or 101=Professional and locked or 102=General Office and locked or 103=Monochrome and locked - The Print Quality drop down list will be updated appropriately for those devices supporting this feature.
176 /upgsmmpd - Use this command line option to upgrade any existing queues on the destination computer that are using one of the older Mobile Print Drivers (e.g. HP Mobile Printing PS or HP Mobile Printing PCL 5 ) to the newer UPD.
500 /m - gives the ability to specify the driver model name in which you want to install. e.g. install /m"HP Universal Printing PCL 6 (v4.7)"
