home *** CD-ROM | disk | FTP | other *** search
- MKMSGF
- EThe parameter specified in PROTOCOL.INI for keyword %1 is not the proper character type.
- EAn unrecoverable error occurred in the IBM LANStreamer Adapter NDIS device driver program.
- EAll IBM LANStreamer adapters must be set to the same interrupt level.
- IThe universally administered address of the IBM LANStreamer Adapter is %1.
- IThe IBM LANStreamer Adapter is using a locally administered address of %1.
- EThe parameter values have forced the control-block size to exceed the allowable limit.
- EThe adapter is not responding.
- IThe IBM LANStreamer Adapter is operating at a data rate of 4 Mbps.
- IThe IBM LANStreamer Adapter is operating at a data rate of 16 Mbps.
- WDuplicate device driver statements exist in CONFIG.SYS.
- EThe required parameter DRIVERNAME was not found in PROTOCOL.INI.
- EThe protocol manager could not be opened.
- EAn unrecoverable error occurred while attempting to register the IBM LANStreamer Adapter NDIS device driver program with the protocol manager.
- ENo physical adapter was found in this machine.
- WThe unrecognized parameter %1 was found in PROTOCOL.INI.
- WThe value specified for network address in PROTOCOL.INI is not valid. The burned-in address will be substituted.
- IIBM LANStreamer Adapter NDIS Device Driver Version %1
- EA duplicate network address was found while inserting onto the ring.
- ERing failure or beaconing was encountered while inserting onto the ring.
- EA hardware failure occurred while attempting to open the adapter.
- EA lobe media error has occurred. Ensure that the token-ring cable is connected to the adapter.
- IInitialization starting for section %1 in PROTOCOL.INI.
- EAn unrecoverable error occurred during an address translation in the IBM LANStreamer Adapter NDIS device driver.
- EThe configuration values have forced the control-block size to exceed the available memory.
-