Intel EtherExpress PRO/10 PCI LAN Adapter
¬

¬Network Devices

This PCI bus device driver is designed to run on an Intel-based computer running OPENSTEPä for Mach Release 4.0. 

Supported Hardware 
	Intel EtherExpress PRO/10 PCI LAN Adapter (PILA8400)
	Intel EtherExpress PRO/10 PCI LAN Adapter (PILA8420)

This driver supports the Intel EtherExpress PRO/10 PCI LAN Adapter which is based on the Intel 82596 LAN co-processor. 

Installing the Adaptor 
·	Install the adapter in the system.  Refer to the Intel EtherExpress PRO/10 Adapter Installation Guide for complete information.

Configuration 
·	Log in as root and run Configure to add the adapter to the system.  
·	Click on the Network Devices icon at the top of Configure's "Summary of Devices" window.  In the Add Network Devices panel that opens, select the radio button labeled "Show Drivers for Detected Devices" if it is not already highlighted.  
·	Select "Intel EtherExpress PRO/10 PCI LAN Adapter" from the list, and click Add. 
·	Select the connector type (applies only to model PILA8400).   Select "Auto" to automatically determine whether BNC, AUI, or RJ-45 is used.
·	Click Done, then click Save, then quit Configure.

¬
	
See also

·	"Add a Device" in Configure's on-line help.

·	See NeXTanswer 1824 for general information on installing and configuring device drivers.