Here is a copy of SCONFIG.HLP...
``Beamer`` #1@3459.Terranet
Thu Jul 27 18:30:32 1995
0R 34 07/30 02:50 WWIVNET 4051->8421
0R 34 07/29 11:31 WWIVNet ->4051
0R 34 07/28 19:02 WWIVNet 4001->4051
0R 34 07/28 11:27 WWIVnet 2001->4001
0R 34 07/28 03:06 WWIVnet 2121->2001
0R 35 07/27 23:25 WWIVnet ->2121
0R 35 07/27 23:24 Terranet 1025->3487
0R 34 07/27 19:01 TerraNET ->1025
0R 34 07/27 19:06 [Lv3.8ß1 TerraNET 3459 ->1025 (via DesertNet 3450 ->1025)]
0R 34 07/27 19:06 TerraNET ->3459
7╔═══───∙─═─ ─═── ──═─ ─ ── ∙
7║ 1Responce To: 3I don't have...
7║ 1Posted By  : 3``Spam Burger`` #1@2446.WWIVnet
7╚═════──── ═──═─ ─══─ ──═─ ─ ─── ∙


(N)ext:  
Go on to next page.  If you have conferencing enabled, you have to press } to
go on to the next conference.  If there are more than one page of subs in the
current conference, choosing (N)ext will take you on to the next page, leaving
you in the current conference.  

(P)revious:  
Take you back one page.  Works like (N)ext but in reverse.  If you want to go
back one conference, press {

(T)oggle:  
Toggles the current status of the sub.  Spacebar will do this as well.

(C)lear All:  
Clears all subs currently displayed on the screen.

(S)et All:  
Toggles on all subs on trhe current page.

(Q):  
Quit to the main Defaults menu.




Press your SPACE BAR to 'Tag' the subs/dirs that you want to include into your
'New Scan' Scanning.

Upon doing so, you will be presented with something that looks like this:

Configure QSCAN -- Local Discussion            -- Press <SPACE> to toggle a sub
───────────────────────────────────────────────────────────────────────────────
[■] Sam Sez
[■] The Never-Ending Story (Written
[ ] Local User Get Together Discussi
[■] Best Local Restraunts
[ ] South East Texas Talk


Next  Prev  Toggle  Clear ALL  Set ALL  Read New  { Conf  } Conf  Quit
^^^^

The "Next" above the carets will be highlighted.  What this "Next" means is
the Next Page of the current conference.  In this particular conference
("Local Discussion", as indicated at the top of the page) there is no "Next
page"...there are only the five subs shown on this page in this particular
conference.  Using your up and down arrows, navigate up and down the list of
subs, using your spacebar to toggle off or on any you want to read.  (You may
have to use either the numbers on your numeric keypad, or the ones between the
right Ctrl and Shift keys, or both sets may work.)  The [■] indicates your
desire to read that particular sub. It will change to [ ] when that particular
sub is turned off.

After you finish this page, press } to go to the next conference, and repeat
the process.  The next conference should look something like this:


Configure QSCAN -- Of Interest to Sysops       -- Press <SPACE> to toggle a sub
───────────────────────────────────────────────────────────────────────────────
[■] WWIV Support Board Sub             [■] QWKMod and WWIV QWK Readers Dicu
[■] WWIV 4.24 Development Sub          [■] Hackers Elite (How to Protect Yo
[■] WWIV Modifications Sub             [■] JAFO's Support Sub
[■] Group Four Sysops                  [■] WWIV Sysops Magazine
[■] Modnet                             [■] Netlog Support Sub
[■] Mod Talk and Requests              [■] Mod Companion Sub

Next  Prev  Toggle  Clear ALL  Set ALL  Read New  { Conf  } Conf  Quit
^^^^

In this particular case, most all of the subs are related to Sysops, and you
may not be interested in them at all, or a very few of them.  In this case, you
will benefit by selecting "Clear ALL", which will de-select them all, then
turn on the ones you want to include (again by using your arrow keys and
spacebar).  Also, in this conference, there is probably more than one page.

"Prev" will take you back a page in the current conference.
"Toggle" does the same thing as the spacebar.
"Set ALL" will turn on all subs in the current conference.
"Read New" will show you the messages in whatever sub you have highlighted at
      the time.  This is good if you want to see a sample of the messages in a
      sub where the title may be unclear of what the sub is about.
"{ and } Conf" will go backwards or forwards one conference.
"Quit" takes you back the the main QWK menu.

Once you select all the subs you wish to read, you will not need to do this
again unless I have mechanical problems with my computer.  So please don't
think this is something you'll have to do each time you log on.  Also, if/when
I add more message bases, they are automatically added into your scan so that
you will know they are there.  If I add something new and you don't like it or
don't care to read it, you simply turn it off in the above manner.



