GCC

NAME

SYNOPSIS

WARNING

For complete and current documentation, refer to the Info file `gcc' or the manual Using and Porting GNU CC (for version 2.0). Both are made from the Texinfo source file gcc.texinfo.  

DESCRIPTION

gcc

assumes preprocessed (.i) files are C and assumes C style linking.

g++

assumes preprocessed (.i) files are C++ and assumes C++ style linking.

Suffixes of source file names indicate the language and kind of processing to be done:

.c C source; preprocess, compile, assemble

.CC++ source; preprocess, compile, assemble

.ccC++ source; preprocess, compile, assemble

.cxxC++ source; preprocess, compile, assemble

.mObjective-C source; preprocess, compile, assemble

.ipreprocessed C; compile, assemble

.iipreprocessed C++; compile, assemble

.sAssembler source; assemble

.SAssembler source; preprocess, assemble

.hPreprocessor file; not usually named on command line

?? Other (unrecognized) files passed to linker.

    Common cases:

.oObject file

.aArchive file

Linking is always the last stage unless you use one of the -c, -S, or -E options to avoid it (or unless compilation errors stop the whole process). For the link stage, all .o files corresponding to source files, -l libraries, unrecognized filenames (including named .o object files and .a archives) are passed to the linker in command-line order.

OPTIONS

Most `-f' and `-W' options have two contrary forms: -fname and -fno-name (or -Wname and -Wno-name). Only the non-default forms are shown here.

Here is a summary of all the options, grouped by type. Explanations are in the following sections.

Overall Options

-c -S -E -o file -pipe -v -x language

Language Options

-ansi -fall-virtual -fcond-mismatch -fdollars-in-identifiers -fenum-int-equiv -fno-asm -fno-builtin -fno-strict-prototype -fsigned-bitfields -fsigned-char -fthis-is-variable -funsigned-bitfields -funsigned-char -fwritable-strings -traditional -traditional-cpp -trigraphs

Warning Options

-fsyntax-only -pedantic -pedantic-errors -w -W -Wall -Waggregate-return -Wcast-align -Wcast-qual -Wcomment -Wconversion -Wenum-clash -Werror -Wformat -Wid-clash-len -Wimplicit -Winline -Wmissing-prototypes -Wparentheses -Wpointer-arith -Wreturn-type -Wshadow -Wstrict-prototypes -Wswitch -Wtraditional -Wtrigraphs -Wuninitialized -Wunused -Wwrite-strings

Debugging Options

-a -dletters -fpretend-float -g -gstabs -gdwarf -ggdb -gsdb -p -pg -save-temps

Optimization Options

-fcaller-saves -fcse-follow-jumps -fdelayed-branch -felide-constructors -fexpensive-optimizations -ffloat-store -fforce-addr -fforce-mem -finline -finline-functions -fkeep-inline-functions -fmemoize-lookups -fno-default-inline -fno-defer-pop -fno-function-cse -fomit-frame-pointer -frerun-cse-after-loop -fschedule-insns -fschedule-insns2 -fstrength-reduce -fthread-jumps -funroll-all-loops -funroll-loops -O -O2

Preprocessor Options

-C -dD -dM -dN -Dmacro[=defn] -E -H -i file -M -MD -MM -MMD -nostdinc -P -Umacro -undef

Linker Options

-llibrary -nostdlib -static

Directory Options

-Bprefix -Idir -I- -Ldir

Target Options

-b machine -V version

Machine Dependent Options

M680x0 Options
-m68000 -m68020 -m68881 -mbitfield -mc68000 -mc68020 -mfpa -mnobitfield -mrtd -mshort -msoft-float

VAX Options
-mg -mgnu -munix

SPARC Options
-mfpu -mno-epilogue

Convex Options
-margcount -mc1 -mc2 -mnoargcount

AMD29K Options
-m29000 -m29050 -mbw -mdw -mkernel-registers -mlarge -mnbw -mnodw -msmall -mstack-check -muser-registers

M88K Options
-mbig-pic -mcheck-zero-division -mhandle-large-shift -midentify-revision -mno-check-zero-division -mno-ocs-debug-info -mno-ocs-frame-position -mno-optimize-arg-area -mno-underscores -mocs-debug-info -mocs-frame-position -moptimize-arg-area -mshort-data-num -msvr3 -msvr4 -mtrap-large-shift -muse-div-instruction -mversion-03.00 -mwarn-passed-structs

RS6000 Options
-mfp-in-toc -mno-fop-in-toc

RT Options
-mcall-lib-mul -mfp-arg-in-fpregs -mfp-arg-in-gregs -mfull-fp-blocks -mhc-struct-return -min-line-mul -mminimum-fp-blocks -mnohc-struct-return

MIPS Options
-mcpu=cpu type -mips2 -mips3 -mint64 -mlong64 -mlonglong128 -mmips-as -mgas -mrnames -mno-rnames -mgpopt -mno-gpopt -mstats -mno-stats -mmemcpy -mno-memcpy -mno-mips-tfile -mmips-tfile -msoft-float -mhard-float -mabicalls -mno-abicalls -mhalf-pic -mno-half-pic -G num

i386 Options
-m486 -mno486 -msoft-float

Code Generation Options

+eN -fcall-saved-reg -fcall-used-reg -ffixed-reg -fno-common -fno-gnu-binutils -fnonnull-objects -fpcc-struct-return -fpic -fPIC -fshared-data -fshort-enums -fshort-double -fvolatile

OVERALL OPTIONS

-x language

Specify explicitly the language for the following input files (rather than choosing a default based on the file name suffix) . This option applies to all following input files until the next `-x' option. Possible values of language are `c', `objective-c', `c-header', `c++', `cpp-output', `assembler', and `assembler-with-cpp'.

-x none

Turn off any specification of a language, so that subsequent files are handled according to their file name suffixes (as they are if `-x' has not been used at all).

If you want only some of the four stages (preprocess, compile, assemble, link), you can use `-x' (or filename suffixes) to tell gcc where to start, and one of the options `-c', `-S', or `-E' to say where gcc is to stop. Note that some combinations (for example, `-x cpp-output -E') instruct gcc to do nothing at all.

-c

Compile or assemble the source files, but do not link. The compiler output is an object file corresponding to each source file.

By default, GCC makes the object file name for a source file by replacing the suffix `.c', `.i', `.s', etc., with `.o'. Use -o to select another name.

GCC ignores any unrecognized input files (those that do not require compilation or assembly) with the -c option.

-S

Stop after the stage of compilation proper; do not assemble. The output is an assembler code file for each non-assembler input file specified.

By default, GCC makes the assembler file name for a source file by replacing the suffix `.c', `.i', etc., with `.s'. Use -o to select another name.

GCC ignores any input files that don't require compilation.

-E

Stop after the preprocessing stage; do not run the compiler proper. The output is preprocessed source code, which is sent to the standard output.

GCC ignores input files which don't require preprocessing.

-o file

Place output in file file. This applies regardless to whatever sort of output GCC is producing, whether it be an executable file, an object file, an assembler file or preprocessed C code.

Since only one output file can be specified, it does not make sense to use `-o' when compiling more than one input file, unless you are producing an executable file as output.

If you do not specify `-o', the default is to put an executable file in `a.out', the object file for `source.suffix' in `source.o', its assembler file in `source.s', and all preprocessed C source on standard output.

-v

Print (on standard error output) the commands executed to run the stages of compilation. Also print the version number of the compiler driver program and of the preprocessor and the compiler proper.

-pipe

Use pipes rather than temporary files for communication between the various stages of compilation. This fails to work on some systems where the assembler cannot read from a pipe; but the GNU assembler has no trouble.

LANGUAGE OPTIONS

-ansi

Support all ANSI standard C programs. This turns off certain features of GNU C that are incompatible with ANSI C, such as the asm, inline and typeof keywords, and predefined macros such as unix and vax that identify the type of system you are using. It also enables the undesirable and rarely used ANSI trigraph feature, and makes the preprocessor accept `$' as part of identifiers.

The alternate keywords __asm__, __extension__, __inline__ and __typeof__ continue to work despite `-ansi'. You would not want to use them in an ANSI C program, of course, but it is useful to put them in header files that might be included in compilations done with `-ansi'. Alternate predefined macros such as __unix__ and __vax__ are also available, with or without `-ansi'.

The `-ansi' option does not cause non-ANSI programs to be rejected gratuitously. For that, `-pedantic' is required in addition to `-ansi'.

The preprocessor predefines a macro __STRICT_ANSI__ when you use the `-ansi' option. Some header files may notice this macro and refrain from declaring certain functions or defining certain macros that the ANSI standard doesn't call for; this is to avoid interfering with any programs that might use these names for other things.

-fno-asm

Do not recognize asm, inline or typeof as a keyword. These words may then be used as identifiers. You can use __asm__, __inline__ and __typeof__ instead. `-ansi' implies `-fno-asm'.

-fno-builtin

(Ignored for C++.) Don't recognize non-ANSI built-in functions. `-ansi' also has this effect. Currently, the only function affected is alloca.

-fno-strict-prototype

(C++ only.) Consider the declaration int foo ();. In C++, this means that the function foo takes no arguments. In ANSI C, this is declared int foo(void);. With the flag `-fno-strict-prototype', declaring functions with no arguments is equivalent to declaring its argument list to be untyped, i.e., int foo (); is equivalent to saying int foo (...);.

-trigraphs

Support ANSI C trigraphs. The `-ansi' option implies `-trigraphs'.

-traditional

Attempt to support some aspects of traditional C compilers. For details, see the GNU C Manual; the duplicate list here has been deleted so that we won't get complaints when it is out of date.

But one note about C++ programs only (not C). `-traditional' has one additional effect for C++: assignment to this is permitted. This is the same as the effect of `-fthis-is-variable'.

-traditional-cpp

Attempt to support some aspects of traditional C preprocessors. This includes the items that specifically mention the preprocessor above, but none of the other effects of `-traditional'.

-fdollars-in-identifiers

(C++ only.) Permit the use of `$' in identifiers. (For GNU C, this is the default, and you can forbid it with `-ansi'.) Traditional C allowed the character `$' to form part of identifiers; by default, GNU C also allows this. However, ANSI C forbids `$' in identifiers, and GNU C++ also forbids it by default on most platforms (though on some platforms it's enabled by default for GNU C++ as well).

-fenum-int-equiv

(C++ only.) Normally GNU C++ allows conversion of enum to int, but not the other way around. Use this option if you want GNU C++ to allow conversion of int to enum as well.

-fall-virtual

(C++ only.) When you use the `-fall-virtual', all member functions (except for constructor functions and new/delete member operators) declared in the same class with a ``method-call'' operator method are treated as virtual functions of the given class. In effect, all of these methods become ``implicitly virtual.''

This does not mean that all calls to these methods will be made through the internal table of virtual functions. There are some circumstances under which it is obvious that a call to a given virtual function can be made directly, and in these cases the calls still go direct.

The effect of making all methods of a class with a declared `operator->()()' implicitly virtual using `-fall-virtual' extends also to all non-constructor methods of any class derived from such a class.

-fcond-mismatch

Allow conditional expressions with mismatched types in the second and third arguments. The value of such an expression is void.

-fthis-is-variable

(C++ only.) The incorporation of user-defined free store management into C++ has made assignment to this an anachronism. Therefore, by default GNU C++ treats the type of this in a member function of class X to be X *const. In other words, it is illegal to assign to this within a class member function. However, for backwards compatibility, you can invoke the old behavior by using `-fthis-is-variable'.

-funsigned-char

Let the type char be unsigned, like unsigned char.

Each kind of machine has a default for what char should be. It is either like unsigned char by default or like signed char by default.

Ideally, a portable program should always use signed char or unsigned char when it depends on the signedness of an object. But many programs have been written to use plain char and expect it to be signed, or expect it to be unsigned, depending on the machines they were written for. This option, and its inverse, let you make such a program work with the opposite default.

The type char is always a distinct type from each of signed char and unsigned char, even though its behavior is always just like one of those two.

-fsigned-char

Let the type char be signed, like signed char.

Note that this is equivalent to `-fno-unsigned-char', which is the negative form of `-funsigned-char'. Likewise, `-fno-signed-char' is equivalent to `-funsigned-char'.

-fsigned-bitfields

-funsigned-bitfields

-fno-signed-bitfields

-fno-unsigned-bitfields

These options control whether a bitfield is signed or unsigned, when declared with no explicit `signed' or `unsigned' qualifier. By default, such a bitfield is signed, because this is consistent: the basic integer types such as int are signed types.

However, when you specify `-traditional', bitfields are all unsigned no matter what.

-fwritable-strings

Store string constants in the writable data segment and don't uniquize them. This is for compatibility with old programs which assume they can write into string constants. `-traditional' also has this effect.

Writing into string constants is a very bad idea; ``constants'' should be constant.

PREPROCESSOR OPTIONS

If you use the `-E' option, GCC does nothing except preprocessing. Some of these options make sense only together with `-E' because they cause the preprocessor output to be unsuitable for actual compilation.

-i file

Process file as input, discarding the resulting output, before processing the regular input file. Because the output generated from file is discarded, the only effect of `-i file' is to make the macros defined in file available for use in the main input. The preprocessor evaluates any `-D' and `-U' options on the command line before processing `-i' file.

-nostdinc

Do not search the standard system directories for header files. Only the directories you have specified with `-I' options (and the current directory, if appropriate) are searched.

By using both `-nostdinc' and `-I-', you can limit the include-file search file to only those directories you specify explicitly.

-undef

Do not predefine any nonstandard macros. (Including architecture flags).

-E

Run only the C preprocessor. Preprocess all the C source files specified and output the results to standard output or to the specified output file.

-C

Tell the preprocessor not to discard comments. Used with the `-E' option.

-P

Tell the preprocessor not to generate `#line' commands. Used with the `-E' option.

-M

Tell the preprocessor to output a rule suitable for make describing the dependencies of each object file. For each source file, the preprocessor outputs one make-rule whose target is the object file name for that source file and whose dependencies are all the files `#include'd in it. This rule may be a single line or may be continued with `\'-newline if it is long. The list of rules is printed on standard output instead of the preprocessed C program.

`-M' implies `-E'.

-MM

Like `-M' but the output mentions only the user header files included with `#include file"'. System header files included with `#include <file>' are omitted.

-MD

Like `-M' but the dependency information is written to files with names made by replacing `.c' with `.d' at the end of the input file names. This is in addition to compiling the file as specified---`-MD' does not inhibit ordinary compilation the way `-M' does.

The Mach utility `md' can be used to merge the `.d' files into a single dependency file suitable for using with the `make' command.

-MMD

Like `-MD' except mention only user header files, not system header files.

-H

Print the name of each header file used, in addition to other normal activities.

-Dmacro

Define macro macro with the string `1' as its definition.

-Dmacro=defn

Define macro macro as defn. All instances of `-D' on the command line are processed before any `-U' or `-i' options.

-Umacro

Undefine macro macro. `-U' options are evaluated after all `-D' options, but before any `-i' options.

-dM

Tell the preprocessor to output only a list of the macro definitions that are in effect at the end of preprocessing. Used with the `-E' option.

-dD

Tell the preprocessing to pass all macro definitions into the output, in their proper sequence in the rest of the output.

-dN

Like `-dD' except that the macro arguments and contents are omitted. Only `#define name' is included in the output.

LINKER OPTIONS

object-file-name

A file name that does not end in a special recognized suffix is considered to name an object file or library. (Object files are distinguished from libraries by the linker according to the file contents.) If GCC does a link step, these object files are used as input to the linker.

-llibrary

Use the library named library when linking.

The linker searches a standard list of directories for the library, which is actually a file named `liblibrary.a'. The linker then uses this file as if it had been specified precisely by name.

The directories searched include several standard system directories plus any that you specify with `-L'.

Normally the files found this way are library files---archive files whose members are object files. The linker handles an archive file by scanning through it for members which define symbols that have so far been referenced but not defined. However, if the linker finds an ordinary object file rather than a library, the object file is linked in the usual fashion. The only difference between using an `-l' option and specifying a file name is that `-l' surrounds library with `lib' and `.a' and searches several directories.

-nostdlib

Don't use the standard system libraries and startup files when linking. Only the files you specify will be passed to the linker.

-static

On systems that support dynamic linking, this prevents linking with the shared libraries. On other systems, this option has no effect.

DIRECTORY OPTIONS

-Idir

Append directory dir to the list of directories searched for include files.

-I-

Any directories you specify with `-I' options before the `-I-' option are searched only for the case of `#include "file"'; they are not searched for `#include <file>'.

If additional directories are specified with `-I' options after the `-I-', these directories are searched for all `#include' directives. (Ordinarily all `-I' directories are used this way.)

In addition, the `-I-' option inhibits the use of the current directory (where the current input file came from) as the first search directory for `#include "file"'. There is no way to override this effect of `-I-'. With `-I.' you can specify searching the directory which was current when the compiler was invoked. That is not exactly the same as what the preprocessor does by default, but it is often satisfactory.

`-I-' does not inhibit the use of the standard system directories for header files. Thus, `-I-' and `-nostdinc' are independent.

-Ldir

Add directory dir to the list of directories to be searched for `-l'.

-Bprefix

This option specifies where to find the executables, libraries and data files of the compiler itself.

The compiler driver program runs one or more of the subprograms `cpp', `cc1' (or, for C++, `cc1plus'), `as' and `ld'. It tries prefix as a prefix for each program it tries to run, both with and without `machine/version/'.

For each subprogram to be run, the compiler driver first tries the `-B' prefix, if any. If that name is not found, or if `-B' was not specified, the driver tries two standard prefixes, which are `/usr/lib/gcc/' and `/usr/local/lib/gcc-lib/'. If neither of those results in a file name that is found, the compiler driver searches for the unmodified program name, using the directories specified in your `PATH' environment variable.

The run-time support file `libgcc.a' is also searched for using the `-B' prefix, if needed. If it is not found there, the two standard prefixes above are tried, and that is all. The file is left out of the link if it is not found by those means. Most of the time, on most machines, `libgcc.a' is not actually necessary.

You can get a similar result from the environment variable GCC_EXEC_PREFIX; if it is defined, its value is used as a prefix in the same way. If both the `-B' option and the GCC_EXEC_PREFIX variable are present, the `-B' option is used first and the environment variable value second.

WARNING OPTIONS

These options control the amount and kinds of warnings produced by GNU CC:

-fsyntax-only

Check the code for syntax errors, but don't emit any output.

-w

Inhibit all warning messages.

-pedantic

Issue all the warnings demanded by strict ANSI standard C; reject all programs that use forbidden extensions.

Valid ANSI standard C programs should compile properly with or without this option (though a rare few will require `-ansi'). However, without this option, certain GNU extensions and traditional C features are supported as well. With this option, they are rejected. There is no reason to use this option; it exists only to satisfy pedants.

`-pedantic' does not cause warning messages for use of the alternate keywords whose names begin and end with `__'. Pedantic warnings are also disabled in the expression that follows __extension__. However, only system header files should use these escape routes; application programs should avoid them.

-pedantic-errors

Like `-pedantic', except that errors are produced rather than warnings.

-W

Print extra warning messages for these events:

   *

A nonvolatile automatic variable might be changed by a call to longjmp. These warnings are possible only in optimizing compilation.

The compiler sees only the calls to setjmp. It cannot know where longjmp will be called; in fact, a signal handler could call it at any point in the code. As a result, you may get a warning even when there is in fact no problem because longjmp cannot in fact be called at the place which would cause a problem.

   *

A function can return either with or without a value. (Falling off the end of the function body is considered returning without a value.) For example, this function would evoke such a warning:

foo (a)
{
  if (a > 0)
    return a;
}

Spurious warnings can occur because GNU CC does not realize that certain functions (including abort and longjmp) will never return.

   *

An expression-statement contains no side effects.

   *

An unsigned value is compared against zero with `>' or `<='.

-Wimplicit

Warn whenever a function or parameter is implicitly declared.

-Wreturn-type

Warn whenever a function is defined with a return-type that defaults to int. Also warn about any return statement with no return-value in a function whose return-type is not void.

-Wunused

Warn whenever a local variable is unused aside from its declaration, whenever a function is declared static but never defined, and whenever a statement computes a result that is explicitly not used.

-Wswitch

Warn whenever a switch statement has an index of enumeral type and lacks a case for one or more of the named codes of that enumeration. (The presence of a default label prevents this warning.) case labels outside the enumeration range also provoke warnings when this option is used.

-Wcomment

Warn whenever a comment-start sequence `/*' appears in a comment.

-Wtrigraphs

Warn if any trigraphs are encountered (assuming they are enabled).

-Wformat

Check calls to printf and scanf, etc., to make sure that the arguments supplied have types appropriate to the format string specified.

-Wuninitialized

An automatic variable is used without first being initialized.

These warnings are possible only in optimizing compilation, because they require data flow information that is computed only when optimizing. If you don't specify `-O', you simply won't get these warnings.

These warnings occur only for variables that are candidates for register allocation. Therefore, they do not occur for a variable that is declared volatile, or whose address is taken, or whose size is other than 1, 2, 4 or 8 bytes. Also, they do not occur for structures, unions or arrays, even when they are in registers.

Note that there may be no warning about a variable that is used only to compute a value that itself is never used, because such computations may be deleted by data flow analysis before the warnings are printed.

These warnings are made optional because GNU CC is not smart enough to see all the reasons why the code might be correct despite appearing to have an error. Here is one example of how this can happen:

{
  int x;
  switch (y)
    {
    case 1: x = 1;
      break;
    case 2: x = 4;
      break;
    case 3: x = 5;
    }
  foo (x);
}

If the value of y is always 1, 2 or 3, then x is always initialized, but GNU CC doesn't know this. Here is another common case:

{
  int save_y;
  if (change_y) save_y = y, y = new_y;
  ...
  if (change_y) y = save_y;
}

This has no bug because save_y is used only if it is set.

Some spurious warnings can be avoided if you declare as volatile all the functions you use that never return.

-Wparentheses

Warn if parentheses are omitted in certain contexts.

-Wall

All of the above `-W' options combined. These are all the options which pertain to usage that we recommend avoiding and that we believe is easy to avoid, even in conjunction with macros.

The remaining `-W...' options are not implied by `-Wall' because they warn about constructions that we consider reasonable to use, on occasion, in clean programs.

-Wtraditional

Warn about certain constructs that behave differently in traditional and ANSI C.

   *

Macro arguments occurring within string constants in the macro body. These would substitute the argument in traditional C, but are part of the constant in ANSI C.

   *

A function declared external in one block and then used after the end of the block.

   *

A switch statement has an operand of type long.

-Wshadow

Warn whenever a local variable shadows another local variable.

-Wid-clash-len

Warn whenever two distinct identifiers match in the first len characters. This may help you prepare a program that will compile with certain obsolete, brain-damaged compilers.

-Wpointer-arith

Warn about anything that depends on the ``size of'' a function type or of void. GNU C assigns these types a size of 1, for convenience in calculations with void * pointers and pointers to functions.

-Wcast-qual

Warn whenever a pointer is cast so as to remove a type qualifier from the target type. For example, warn if a const char * is cast to an ordinary char *.

-Wcast-align

Warn whenever a pointer is cast such that the required alignment of the target is increased. For example, warn if a char * is cast to an int * on machines where integers can only be accessed at two- or four-byte boundaries.

-Wwrite-strings

Give string constants the type const char[length] so that copying the address of one into a non-const char * pointer will get a warning. These warnings will help you find at compile time code that can try to write into a string constant, but only if you have been very careful about using const in declarations and prototypes. Otherwise, it will just be a nuisance; this is why we did not make `-Wall' request these warnings.

-Wconversion

Warn if a prototype causes a type conversion that is different from what would happen to the same argument in the absence of a prototype. This includes conversions of fixed point to floating and vice versa, and conversions changing the width or signedness of a fixed point argument except when the same as the default promotion.

-Waggregate-return

Warn if any functions that return structures or unions are defined or called. (In languages where you can return an array, this also elicits a warning.)

-Wstrict-prototypes

Warn if a function is declared or defined without specifying the argument types. (An old-style function definition is permitted without a warning if preceded by a declaration which specifies the argument types.)

-Wmissing-prototypes

Warn if a global function is defined without a previous prototype declaration. This warning is issued even if the definition itself provides a prototype. The aim is to detect global functions that fail to be declared in header files.

-Wenum-clash

(C++ only.) Warn when converting between different enumeration types.

-Woverloaded-virtual

(C++ only.) In a derived class, the definitions of virtual functions must match the type signature of a virtual function declared in the base class. Use this option to request warnings when a derived class declares a function that may be an erroneous attempt to define a virtual function: that is, warn when a function with the same name as a virtual function in the base class, but with a type signature that doesn't match any virtual functions from the base class.

-Winline

Warn if a function can not be inlined, and either it was declared as inline, or else the -finline-functions option was given.

-Werror

Treat warnings as errors; abort compilation after any warning.

DEBUGGING OPTIONS

-g

Produce debugging information in the operating system's native format (for DBX or SDB or DWARF). GDB also can work with this debugging information. On most systems that use DBX format, `-g' enables use of extra debugging information that only GDB can use; if you want to control for certain whether to generate this information, use `-ggdb' or `-gdbx'.

Unlike most other C compilers, GNU CC allows you to use `-g' with `-O'. The shortcuts taken by optimized code may occasionally produce surprising results: some variables you declared may not exist at all; flow of control may briefly move where you did not expect it; some statements may not be executed because they compute constant results or their values were already at hand; some statements may execute in different places because they were moved out of loops.

Nevertheless it proves possible to debug optimized output. This makes it reasonable to use the optimizer for programs that might have bugs.

The following options are useful when GNU CC is configured and compiled with the capability for more than one debugging format.

-ggdb

Produce debugging information in DBX format (if that is supported), including GDB extensions.

-gdbx

Produce debugging information in DBX format (if that is supported), without GDB extensions.

-gsdb

Produce debugging information in SDB format (if that is supported).

-gdwarf

Produce debugging information in DWARF format (if that is supported).

-glevel
-ggdblevel
-gdbxlevel
-gsdblevel

-gdwarflevel

Request debugging information and also use level to specify how much information. The default level is 2.

Level 1 produces minimal information, enough for making backtraces in parts of the program that you don't plan to debug. This includes descriptions of functions and external variables, but no information about local variables and no line numbers.

-p

Generate extra code to write profile information suitable for the analysis program prof.

-pg

Generate extra code to write profile information suitable for the analysis program gprof.

-a

Generate extra code to write profile information for basic blocks, which will record the number of times each basic block is executed. This data could be analyzed by a program like tcov. Note, however, that the format of the data is not what tcov expects. Eventually GNU gprof should be extended to process this data.

-dletters

Says to make debugging dumps during compilation at times specified by letters. This is used for debugging the compiler. The file names for most of the dumps are made by appending a word to the source file name (e.g. `foo.c.rtl' or `foo.c.jump').

-dM

Dump all macro definitions, at the end of preprocessing, and write no output.

-dN

Dump all macro names, at the end of preprocessing.

-dD

Dump all macro definitions, at the end of preprocessing, in addition to normal output.

-dy

Dump debugging information during parsing, to standard error.

-dr

Dump after RTL generation, to `file.rtl'.

-dx

Just generate RTL for a function instead of compiling it. Usually used with `r'.

-dj

Dump after first jump optimization, to `file.jump'.

-ds

Dump after CSE (including the jump optimization that sometimes follows CSE), to `file.cse'.

-dL

Dump after loop optimization, to `file.loop'.

-dt

Dump after the second CSE pass (including the jump optimization that sometimes follows CSE), to `file.cse2'.

-df

Dump after flow analysis, to `file.flow'.

-dc

Dump after instruction combination, to `file.combine'.

-dS

Dump after the first instruction scheduling pass, to `file.sched'.

-dl

Dump after local register allocation, to `file.lreg'.

-dg

Dump after global register allocation, to `file.greg'.

-dR

Dump after the second instruction scheduling pass, to `file.sched2'.

-dJ

Dump after last jump optimization, to `file.jump2'.

-dd

Dump after delayed branch scheduling, to `file.dbr'.

-dk

Dump after conversion from registers to stack, to `file.stack'.

-dm

Print statistics on memory usage, at the end of the run, to standard error.

-dp

Annotate the assembler output with a comment indicating which pattern and alternative was used.

-fpretend-float

When running a cross-compiler, pretend that the target machine uses the same floating point format as the host machine. This causes incorrect output of the actual floating constants, but the actual instruction sequence will probably be the same as GNU CC would make when running on the target machine.

-save-temps

Store the usual ``temporary'' intermediate files permanently; place them in the current directory and name them based on the source file. Thus, compiling `foo.c' with `-c -save-temps' would produce files `foo.cpp' and `foo.s', as well as `foo.o'.

OPTIMIZATION OPTIONS

-O

Optimize. Optimizing compilation takes somewhat more time, and a lot more memory for a large function.

Without `-O', the compiler's goal is to reduce the cost of compilation and to make debugging produce the expected results. Statements are independent: if you stop the program with a breakpoint between statements, you can then assign a new value to any variable or change the program counter to any other statement in the function and get exactly the results you would expect from the source code.

Without `-O', only variables declared register are allocated in registers. The resulting compiled code is a little worse than produced by PCC without `-O'.

With `-O', the compiler tries to reduce code size and execution time.

When you specify `-O', `-fthread-jumps' and `-fdelayed-branch' are turned on. On some machines other flags may also be turned on.

-O2

Highly optimize. As compared to `-O', this option will increase both compilation time and the performance of the generated code.

All `-fflag' options that control optimization are turned on when you specify `-O2', except `-funroll-loops' and `-funroll-all-loops'.

Options of the form `-fflag' specify machine-independent flags. Most flags have both positive and negative forms; the negative form of `-ffoo' would be `-fno-foo'. The following list shows only one form---the one which is not the default. You can figure out the other form by either removing `no-' or adding it.

-ffloat-store

Do not store floating point variables in registers. This prevents undesirable excess precision on machines such as the 68000 where the floating registers (of the 68881) keep more precision than a double is supposed to have.

For most programs, the excess precision does only good, but a few programs rely on the precise definition of IEEE floating point. Use `-ffloat-store' for such programs.

-fmemoize-lookups

-fsave-memoized

(C++ only.) These flags are used to get the compiler to compile programs faster using heuristics. They are not on by default since they are only effective about half the time. The other half of the time programs compile more slowly (and take more memory).

The first time the compiler must build a call to a member function (or reference to a data member), it must (1) determine whether the class implements member functions of that name; (2) resolve which member function to call (which involves figuring out what sorts of type conversions need to be made); and (3) check the visibility of the member function to the caller. All of this adds up to slower compilation. Normally, the second time a call is made to that member function (or reference to that data member), it must go through the same lengthy process again. This means that code like this

  cout << "This " << p << " has " << n << " legs.\n";

makes six passes through all three steps. By using a software cache, a ``hit'' significantly reduces this cost. Unfortunately, using the cache introduces another layer of mechanisms which must be implemented, and so incurs its own overhead. `-fmemoize-lookups' enables the software cache.

Because access privileges (visibility) to members and member functions may differ from one function context to the next, g++ may need to flush the cache. With the `-fmemoize-lookups' flag, the cache is flushed after every function that is compiled. The `-fsave-memoized' flag enables the same software cache, but when the compiler determines that the context of the last function compiled would yield the same access privileges of the next function to compile, it preserves the cache. This is most helpful when defining many member functions for the same class: with the exception of member functions which are friends of other classes, each member function has exactly the same access privileges as every other, and the cache need not be flushed.

-fno-default-inline

(C++ only.) If `-fdefault-inline' is enabled then member functions defined inside class scope are compiled inline by default; i.e., you don't need to add `inline' in front of the member function name. By popular demand, this option is now the default. To keep GNU C++ from inlining these member functions, specify `-fno-default-inline'.

-fno-defer-pop

Always pop the arguments to each function call as soon as that function returns. For machines which must pop arguments after a function call, the compiler normally lets arguments accumulate on the stack for several function calls and pops them all at once.

-fforce-mem

Force memory operands to be copied into registers before doing arithmetic on them. This may produce better code by making all memory references potential common subexpressions. When they are not common subexpressions, instruction combination should eliminate the separate register-load. I am interested in hearing about the difference this makes.

-fforce-addr

Force memory address constants to be copied into registers before doing arithmetic on them. This may produce better code just as `-fforce-mem' may. I am interested in hearing about the difference this makes.

-fomit-frame-pointer

Don't keep the frame pointer in a register for functions that don't need one. This avoids the instructions to save, set up and restore frame pointers; it also makes an extra register available in many functions. It also makes debugging impossible on most machines.

On some machines, such as the Vax, this flag has no effect, because the standard calling sequence automatically handles the frame pointer and nothing is saved by pretending it doesn't exist. The machine-description macro FRAME_POINTER_REQUIRED controls whether a target machine supports this flag.

-finline

Pay attention the inline keyword. Normally the negation of this option `-fno-inline' is used to keep the compiler from expanding any functions inline. However, the opposite effect may be desirable when compiling with `-g', since `-g' normally turns off all inline function expansion.

-finline-functions

Integrate all simple functions into their callers. The compiler heuristically decides which functions are simple enough to be worth integrating in this way.

If all calls to a given function are integrated, and the function is declared static, then GCC normally does not output the function as assembler code in its own right.

-fcaller-saves

Enable values to be allocated in registers that will be clobbered by function calls, by emitting extra instructions to save and restore the registers around such calls. Such allocation is done only when it seems to result in better code than would otherwise be produced.

This option is enabled by default on certain machines, usually those which have no call-preserved registers to use instead.

-fkeep-inline-functions

Even if all calls to a given function are integrated, and the function is declared static, nevertheless output a separate run-time callable version of the function.

-fno-function-cse

Do not put function addresses in registers; make each instruction that calls a constant function contain the function's address explicitly.

This option results in less efficient code, but some strange hacks that alter the assembler output may be confused by the optimizations performed when this option is not used.

The following options control specific optimizations. The `-O2' option turns on all of these optimizations except `-funroll-loops' and `-funroll-all-loops'.

The `-O' option usually turns on the `-fthread-jumps' and `-fdelayed-branch' options, but specific machines may change the default optimizations.

You can use the following flags in the rare cases when ``fine-tuning'' of optimizations to be performed is desired.

-fstrength-reduce

Perform the optimizations of loop strength reduction and elimination of iteration variables.

-fthread-jumps

Perform optimizations where we check to see if a jump branches to a location where another comparison subsumed by the first is found. If so, the first branch is redirected to either the destination of the second branch or a point immediately following it, depending on whether the condition is known to be true or false.

-funroll-loops

Perform the optimization of loop unrolling. This is only done for loops whose number of iterations can be determined at compile time or run time.

-funroll-all-loops

Perform the optimization of loop unrolling. This is done for all loops. This usually makes programs run more slowly.

-fcse-follow-jumps

In common subexpression elimination, scan through jump instructions in certain cases. This is not as powerful as completely global CSE, but not as slow either.

-frerun-cse-after-loop

Re-run common subexpression elimination after loop optimizations has been performed.

-felide-constructors

(C++ only.) Use this option to instruct the compiler to be smarter about when it can elide constructors. Without this flag, GNU C++ and cfront both generate effectively the same code for:

A foo ();
A x (foo ());   // x initialized by `foo ()', no ctor called
A y = foo ();   // call to `foo ()' heads to temporary,
                // y is initialized from the temporary.

Note the difference! With this flag, GNU C++ initializes `y' directly from the call to foo () without going through a temporary.

-fexpensive-optimizations

Perform a number of minor optimizations that are relatively expensive.

-fdelayed-branch

If supported for the target machine, attempt to reorder instructions to exploit instruction slots available after delayed branch instructions.

-fschedule-insns

If supported for the target machine, attempt to reorder instructions to eliminate execution stalls due to required data being unavailable. This helps machines that have slow floating point or memory load instructions by allowing other instructions to be issued until the result of the load or floating point instruction is required.

-fschedule-insns2

Similar to `-fschedule-insns', but requests an additional pass of instruction scheduling after register allocation has been done. This is especially useful on machines with a relatively small number of registers and where memory load instructions take more than one cycle.

TARGET OPTIONS

In addition, older and newer versions of GNU CC can be installed side by side. One of them (probably the newest) will be the default, but you may sometimes wish to use another.

-b machine

The argument machine specifies the target machine for compilation. This is useful when you have installed GNU CC as a cross-compiler.

The value to use for machine is the same as was specified as the machine type when configuring GNU CC as a cross-compiler. For example, if a cross-compiler was configured with `configure i386v', meaning to compile for an 80386 running System V, then you would specify `-b i386v' to run that cross compiler.

When you do not specify `-b', it normally means to compile for the same type of machine that you are using.

-V version

The argument version specifies which version of GNU CC to run. This is useful when multiple versions are installed. For example, version might be `2.0', meaning to run GNU CC version 2.0.

The default version, when you do not specify `-V', is controlled by the way GNU CC is installed. Normally, it will be a version that is recommended for general use.

MACHINE DEPENDENT OPTIONS

These are the `-m' options defined for the 68000 series:

-m68020

-mc68020

Generate output for a 68020 (rather than a 68000). This is the default if you use the unmodified sources.

-m68000

-mc68000

Generate output for a 68000 (rather than a 68020).

-m68881

Generate output containing 68881 instructions for floating point. This is the default if you use the unmodified sources.

-mfpa

Generate output containing Sun FPA instructions for floating point.

-msoft-float

Generate output containing library calls for floating point. WARNING: the requisite libraries are not part of GNU CC. Normally the facilities of the machine's usual C compiler are used, but this can't be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation.

-mshort

Consider type int to be 16 bits wide, like short int.

-mnobitfield

Do not use the bit-field instructions. `-m68000' implies `-mnobitfield'.

-mbitfield

Do use the bit-field instructions. `-m68020' implies `-mbitfield'. This is the default if you use the unmodified sources.

-mrtd

Use a different function-calling convention, in which functions that take a fixed number of arguments return with the rtd instruction, which pops their arguments while returning. This saves one instruction in the caller since there is no need to pop the arguments there.

This calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries compiled with the Unix compiler.

Also, you must provide function prototypes for all functions that take variable numbers of arguments (including printf); otherwise incorrect code will be generated for calls to those functions.

In addition, seriously incorrect code will result if you call a function with too many arguments. (Normally, extra arguments are harmlessly ignored.)

The rtd instruction is supported by the 68010 and 68020 processors, but not by the 68000.

These `-m' options are defined for the Vax:

-munix

Do not output certain jump instructions (aobleq and so on) that the Unix assembler for the Vax cannot handle across long ranges.

-mgnu

Do output those jump instructions, on the assumption that you will assemble with the GNU assembler.

-mg

Output code for g-format floating point numbers instead of d-format.

These `-m' switches are supported on the Sparc:

-mfpu

Generate output containing floating point instructions. This is the default if you use the unmodified sources.

-mno-epilogue

Generate separate return instructions for return statements. This has both advantages and disadvantages; I don't recall what they are.

These `-m' options are defined for the Convex:

-mc1

Generate output for a C1. This is the default when the compiler is configured for a C1.

-mc2

Generate output for a C2. This is the default when the compiler is configured for a C2.

-margcount

Generate code which puts an argument count in the word preceding each argument list. Some nonportable Convex and Vax programs need this word. (Debuggers don't, except for functions with variable-length argument lists; this info is in the symbol table.)

-mnoargcount

Omit the argument count word. This is the default if you use the unmodified sources.

These `-m' options are defined for the AMD Am29000:

-mdw

Generate code that assumes the DW bit is set, i.e., that byte and halfword operations are directly supported by the hardware. This is the default.

-mnodw

Generate code that assumes the DW bit is not set.

-mbw

Generate code that assumes the system supports byte and halfword write operations. This is the default.

-mnbw

Generate code that assumes the systems does not support byte and halfword write operations. This implies `-mnodw'.

-msmall

Use a small memory model that assumes that all function addresses are either within a single 256 KB segment or at an absolute address of less than 256K. This allows the call instruction to be used instead of a const, consth, calli sequence.

-mlarge

Do not assume that the call instruction can be used; this is the default.

-m29050

Generate code for the Am29050.

-m29000

Generate code for the Am29000. This is the default.

-mkernel-registers

Generate references to registers gr64-gr95 instead of gr96-gr127. This option can be used when compiling kernel code that wants a set of global registers disjoint from that used by user-mode code.

Note that when this option is used, register names in `-f' flags must use the normal, user-mode, names.

-muser-registers

Use the normal set of global registers, gr96-gr127. This is the default.

-mstack-check

Insert a call to __msp_check after each stack adjustment. This is often used for kernel code.

These `-m' options are defined for Motorola 88K architectures:

-mbig-pic

Emit position-independent code, suitable for dynamic linking, even if branches need large displacements. Equivalent to the general-use option `-fPIC'. The general-use option `-fpic', by contrast, only emits valid 88k code if all branches involve small displacements. GCC does not emit position-independent code by default.

-midentify-revision

Include an ident directive in the assembler output recording the source file name, compiler name and version, timestamp, and compilation flags used.

-mno-underscores

In assembler output, emit symbol names without adding an underscore character at the beginning of each name. The default is to use an underscore as prefix on each name.

-mno-check-zero-division

-mcheck-zero-division

Early models of the 88K architecture had problems with division by zero; in particular, many of them didn't trap. Use these options to avoid including (or to include explicitly) additional code to detect division by zero and signal an exception. All GCC configurations for the 88K use `-mcheck-zero-division' by default.

-mocs-debug-info

-mno-ocs-debug-info

Include (or omit) additional debugging information (about registers used in each stack frame) as specified in the 88Open Object Compatibility Standard, ``OCS''. This extra information is not needed by GDB. The default for DG/UX, SVr4, and Delta 88 SVr3.2 is to include this information; other 88k configurations omit this information by default.

-mocs-frame-position

-mno-ocs-frame-position

Force (or do not require) register values to be stored in a particular place in stack frames, as specified in OCS. The DG/UX, Delta88 SVr3.2, and BCS configurations use `-mocs-frame-position'; other 88k configurations have the default `-mno-ocs-frame-position'.

-moptimize-arg-area

-mno-optimize-arg-area

Control how to store function arguments in stack frames. `-moptimize-arg-area' saves space, but may break some debuggers (not GDB). `-mno-optimize-arg-area' conforms better to standards. By default GCC does not optimize the argument area.

-mshort-data-num

num Generate smaller data references by making them relative to r0, which allows loading a value using a single instruction (rather than the usual two). You control which data references are affected by specifying num with this option. For example, if you specify `-mshort-data-512', then the data references affected are those involving displacements of less than 512 bytes. `-mshort-data-num' is not effective for num greater than 64K.

-msvr4

-msvr3

Turn on (`-msvr4') or off (`-msvr3') compiler extensions related to System V release 4 (SVr4). This controls the following:

   *

Which variant of the assembler syntax to emit (which you can select independently using `-mversion03.00').

   *

`-msvr4' makes the C preprocessor recognize `#pragma weak'

   *

`-msvr4' makes GCC issue additional declaration directives used in SVr4.

`-msvr3' is the default for all m88K configurations except the SVr4 configuration.

-mtrap-large-shift

-mhandle-large-shift

Include code to detect bit-shifts of more than 31 bits; respectively, trap such shifts or emit code to handle them properly. By default GCC makes no special provision for large bit shifts.

-muse-div-instruction

Very early models of the 88K architecture didn't have a divide instruction, so GCC avoids that instruction by default. Use this option to specify that it's safe to use the divide instruction.

-mversion-03.00

Use alternative assembler syntax for the assembler version corresponding to SVr4, but without enabling the other features triggered by `-svr4'. This is implied by `-svr4', is the default for the SVr4 configuration of GCC, and is permitted by the DG/UX configuration only if `-svr4' is also specified. The Delta 88 SVr3.2 configuration ignores this option.

-mwarn-passed-structs

Warn when a function passes a struct as an argument or result. Structure-passing conventions have changed during the evolution of the C language, and are often the source of portability problems. By default, GCC issues no such warning.

These options are defined for the IBM RS6000:

-mfp-in-toc

-mno-fp-in-toc

Control whether or not floating-point constants go in the Table of Contents (TOC), a table of all global variable and function addresses. By default GCC puts floating-point constants there; if the TOC overflows, `-mno-fp-in-toc' will reduce the size of the TOC, which may avoid the overflow.

These `-m' options are defined for the IBM RT PC:

-min-line-mul

Use an in-line code sequence for integer multiplies. This is the default.

-mcall-lib-mul

Call lmul$$ for integer multiples.

-mfull-fp-blocks

Generate full-size floating point data blocks, including the minimum amount of scratch space recommended by IBM. This is the default.

-mminimum-fp-blocks

Do not include extra scratch space in floating point data blocks. This results in smaller code, but slower execution, since scratch space must be allocated dynamically.

-mfp-arg-in-fpregs

Use a calling sequence incompatible with the IBM calling convention in which floating point arguments are passed in floating point registers. Note that varargs.h and stdargs.h will not work with floating point operands if this option is specified.

-mfp-arg-in-gregs

Use the normal calling convention for floating point arguments. This is the default.

-mhc-struct-return

Return structures of more than one word in memory, rather than in a register. This provides compatibility with the MetaWare HighC (hc) compiler. Use `-fpcc-struct-return' for compatibility with the Portable C Compiler (pcc).

-mnohc-struct-return

Return some structures of more than one word in registers, when convenient. This is the default. For compatibility with the IBM-supplied compilers, use either `-fpcc-struct-return' or `-mhc-struct-return'.

These `-m' options are defined for the MIPS family of computers:

-mcpu=cpu-type

Assume the defaults for the machine type cpu-type when scheduling instructions. The default cpu-type is default, which picks the longest cycles times for any of the machines, in order that the code run at reasonable rates on all MIPS cpu's. Other choices for cpu-type are r2000, r3000, r4000, and r6000. While picking a specific cpu-type will schedule things appropriately for that particular chip, the compiler will not generate any code that does not meet level 1 of the MIPS ISA (instruction set architecture) without the -mips2 or -mips3 switches being used.

-mips2

Issue instructions from level 2 of the MIPS ISA (branch likely, square root instructions). The -mcpu=r4000 or -mcpu=r6000 switch must be used in conjunction with -mips2.

-mips3

Issue instructions from level 3 of the MIPS ISA (64 bit instructions). The -mcpu=r4000 switch must be used in conjunction with -mips2.

-mint64

-mlong64

-mlonglong128

These options don't work at present.

-mmips-as

Generate code for the MIPS assembler, and invoke mips-tfile to add normal debug information. This is the default for all platforms except for the OSF/1 reference platform, using the OSF/rose object format. If any of the -ggdb, -gstabs, or -gstabs+ switches are used, the mips-tfile program will encapsulate the stabs within MIPS ECOFF.

-mgas

Generate code for the GNU assembler. This is the default on the OSF/1 reference platform, using the OSF/rose object format.

-mrnames

-mno-rnames

The -mrnames switch says to output code using the MIPS software names for the registers, instead of the hardware names (ie, a0 instead of $4). The GNU assembler does not support the -mrnames switch, and the MIPS assembler will be instructed to run the MIPS C preprocessor over the source file. The -mno-rnames switch is default.

-mgpopt

-mno-gpopt

The -mgpopt switch says to write all of the data declarations before the instructions in the text section, to all the MIPS assembler to generate one word memory references instead of using two words for short global or static data items. This is on by default if optimization is selected.

-mstats

-mno-stats

For each non-inline function processed, the -mstats switch causes the compiler to emit one line to the standard error file to print statistics about the program (number of registers saved, stack size, etc.).

-mmemcpy

-mno-memcpy

The -mmemcpy switch makes all block moves call the appropriate string function (memcpy or bcopy) instead of possibly generating inline code.

-mmips-tfile

-mno-mips-tfile

The -mno-mips-tfile switch causes the compiler not postprocess the object file with the mips-tfile program, after the MIPS assembler has generated it to add debug support. If mips-tfile is not run, then no local variables will be available to the debugger. In addition, stage2 and stage3 objects will have the temporary file names passed to the assembler embedded in the object file, which means the objects will not compare the same.

-msoft-float

Generate output containing library calls for floating point. WARNING: the requisite libraries are not part of GNU CC. Normally the facilities of the machine's usual C compiler are used, but this can't be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation.

-mhard-float

Generate output containing floating point instructions. This is the default if you use the unmodified sources.

-mfp64

Assume that the FR bit in the status word is on, and that there are 32 64-bit floating point registers, instead of 32 32-bit floating point registers. You must also specify the -mcpu=r4000 and -mips3 switches.

-mfp32

Assume that there are 32 32-bit floating point registers. This is the default.

-mabicalls

The -mabicalls switch says to emit the .abicalls, .cpload, and .cprestore pseudo operations that some System V.4 ports use for position independent code.

-mhalf-pic

-mno-half-pic

The -mhalf-pic switch says to put pointers to extern references into the data section and load them up, rather than put the references in the text section. This option does not work at present. -Gnum Put global and static items less than or equal to num bytes into the small data or bss sections instead of the normal data or bss section. This allows the assembler to emit one word memory reference instructions based on the global pointer (gp or $28), instead of the normal two words used. By default, num is 8 when the MIPS assembler is used, and 0 when the GNU assembler is used. The -Gnum switch is also passed to the assembler and linker. All modules should be compiled with the same -Gnum value.

CODE GENERATION OPTIONS

Most of them begin with `-f'. These options have both positive and negative forms; the negative form of `-ffoo' would be `-fno-foo'. In the table below, only one of the forms is listed---the one which is not the default. You can figure out the other form by either removing `no-' or adding it.

+eN

(C++ only.) control whether virtual function definitions in classes are used to generate code, or only to define interfaces for their callers. These options are provided for compatibility with cfront 1.x usage; the recommended GNU C++ usage is to use #pragma interface and #pragma implementation, instead.

With `+e0', virtual function definitions in classes are declared extern; the declaration is used only as an interface specification, not to generate code for the virtual functions (in this compilation).

With `+e1', g++ actually generates the code implementing virtual functions defined in the code, and makes them publicly visible.

-fnonnull-objects

(C++ only.) Normally, GNU C++ makes conservative assumptions about objects reached through references. For example, the compiler must check that `a' is not null in code like the following:
    obj &a = g ();
    a.f (2);
Checking that references of this sort have non-null values requires extra code, however, and it is unnecessary for many programs. You can use `-fnonnull-objects' to omit the checks for null, if your program doesn't require the default checking.

-fpcc-struct-return

Use the same convention for returning struct and union values that is used by the usual C compiler on your system. This convention is less efficient for small structures, and on many machines it fails to be reentrant; but it has the advantage of allowing intercallability between GCC-compiled code and PCC-compiled code.

-fshort-enums

Allocate to an enum type only as many bytes as it needs for the declared range of possible values. Specifically, the enum type will be equivalent to the smallest integer type which has enough room.

-fshort-double

Use the same size for double as for float .

-fshared-data

Requests that the data and non-const variables of this compilation be shared data rather than private data. The distinction makes sense only on certain operating systems, where shared data is shared between processes running the same program, while private data exists in one copy per process.

-fno-common

Allocate even uninitialized global variables in the bss section of the object file, rather than generating them as common blocks. This has the effect that if the same variable is declared (without extern) in two different compilations, you will get an error when you link them. The only reason this might be useful is if you wish to verify that the program will work on other systems which always work this way.

-fvolatile

Consider all memory references through pointers to be volatile.

-fpic

If supported for the target machines, generate position-independent code, suitable for use in a shared library.

-fPIC

If supported for the target machine, emit position-independent code, suitable for dynamic linking, even if branches need large displacements.

-ffixed-reg

Treat the register named reg as a fixed register; generated code should never refer to it (except perhaps as a stack pointer, frame pointer or in some other fixed role).

reg must be the name of a register. The register names accepted are machine-specific and are defined in the REGISTER_NAMES macro in the machine description macro file.

This flag does not have a negative form, because it specifies a three-way choice.

-fcall-used-reg

Treat the register named reg as an allocatable register that is clobbered by function calls. It may be allocated for temporaries or variables that do not live across a call. Functions compiled this way will not save and restore the register reg.

Use of this flag for a register that has a fixed pervasive role in the machine's execution model, such as the stack pointer or frame pointer, will produce disastrous results.

This flag does not have a negative form, because it specifies a three-way choice.

-fcall-saved-reg

Treat the register named reg as an allocatable register saved by functions. It may be allocated even for temporaries or variables that live across a call. Functions compiled this way will save and restore the register reg if they use it.

Use of this flag for a register that has a fixed pervasive role in the machine's execution model, such as the stack pointer or frame pointer, will produce disastrous results.

A different sort of disaster will result from the use of this flag for a register in which function values may be returned.

This flag does not have a negative form, because it specifies a three-way choice.

-fgnu-binutils

-fno-gnu-binutils

(C++ only.) `-fgnu-binutils ' (the default for most, but not all, platforms) makes GNU C++ emit extra information for static initialization and finalization. This information has to be passed from the assembler to the GNU linker. Some assemblers won't pass this information; you must either use GNU as or specify the option `-fno-gnu-binutils'.

With `-fno-gnu-binutils', you must use the program collect (part of the GCC distribution) for linking.

PRAGMAS

#pragma interface

(C++ only.) Use this directive in header files that define object classes, to save space in most of the object files that use those classes. Normally, local copies of certain information (backup copies of inline member functions, debugging information, and the internal tables that implement virtual functions) must be kept in each object file that includes class definitions. You can use this pragma to avoid such duplication. When a header file containing `#pragma interface' is included in a compilation, this auxiliary information will not be generated (unless the main input source file itself uses `#pragma implementation'). Instead, the object files will contain references to be resolved at link time.

#pragma implementation

#pragma implementation !objects.h!

(C++ only.) Use this pragma in a main input file, when you want full output from included header files to be generated (and made globally visible). The included header file, in turn, should use `#pragma interface'. Backup copies of inline member functions, debugging information, and the internal tables used to implement virtual functions are all generated in implementation files.

If you use `#pragma implementation' with no argument, it applies to an include file with the same basename as your source file; for example, in `allclass.cc', `#pragma implementation' by itself is equivalent to `#pragma implementation "allclass.h"'. Use the string argument if you want a single implementation file to include code from multiple header files.

There is no way to split up the contents of a single header file into multiple implementation files.

FILES

LIBDIR is usually /usr/local/lib/machine/version.
TMPDIR comes from the environment variable TMPDIR (default /usr/tmp if available, else /tmp).  

SEE ALSO

BUGS

COPYING

Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies.

Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one.

Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be included in translations approved by the Free Software Foundation instead of in the original English.  

AUTHORS

Index

NAME

SYNOPSIS

WARNING

DESCRIPTION

OPTIONS

OVERALL OPTIONS

LANGUAGE OPTIONS

PREPROCESSOR OPTIONS

LINKER OPTIONS

DIRECTORY OPTIONS

WARNING OPTIONS

DEBUGGING OPTIONS

OPTIMIZATION OPTIONS

TARGET OPTIONS

MACHINE DEPENDENT OPTIONS

CODE GENERATION OPTIONS

PRAGMAS

FILES

SEE ALSO

BUGS

COPYING

AUTHORS