This is Info file gcc.info, produced by Makeinfo-1.55 from the input file gcc.texi. This file documents the use and the internals of the GNU compiler. Published by the Free Software Foundation 675 Massachusetts Avenue Cambridge, MA 02139 USA Copyright (C) 1988, 1989, 1992, 1993 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also that the sections entitled "GNU General Public License" and "Protect Your Freedom--Fight `Look And Feel'" are included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the sections entitled "GNU General Public License" and "Protect Your Freedom--Fight `Look And Feel'", and this permission notice, may be included in translations approved by the Free Software Foundation instead of in the original English. File: gcc.info, Node: Insns, Next: Calls, Prev: Assembler, Up: RTL Insns ===== The RTL representation of the code for a function is a doubly-linked chain of objects called "insns". Insns are expressions with special codes that are used for no other purpose. Some insns are actual instructions; others represent dispatch tables for `switch' statements; others represent labels to jump to or various sorts of declarative information. In addition to its own specific data, each insn must have a unique id-number that distinguishes it from all other insns in the current function (after delayed branch scheduling, copies of an insn with the same id-number may be present in multiple places in a function, but these copies will always be identical and will only appear inside a `sequence'), and chain pointers to the preceding and following insns. These three fields occupy the same position in every insn, independent of the expression code of the insn. They could be accessed with `XEXP' and `XINT', but instead three special macros are always used: `INSN_UID (I)' Accesses the unique id of insn I. `PREV_INSN (I)' Accesses the chain pointer to the insn preceding I. If I is the first insn, this is a null pointer. `NEXT_INSN (I)' Accesses the chain pointer to the insn following I. If I is the last insn, this is a null pointer. The first insn in the chain is obtained by calling `get_insns'; the last insn is the result of calling `get_last_insn'. Within the chain delimited by these insns, the `NEXT_INSN' and `PREV_INSN' pointers must always correspond: if INSN is not the first insn, NEXT_INSN (PREV_INSN (INSN)) == INSN is always true and if INSN is not the last insn, PREV_INSN (NEXT_INSN (INSN)) == INSN is always true. After delay slot scheduling, some of the insns in the chain might be `sequence' expressions, which contain a vector of insns. The value of `NEXT_INSN' in all but the last of these insns is the next insn in the vector; the value of `NEXT_INSN' of the last insn in the vector is the same as the value of `NEXT_INSN' for the `sequence' in which it is contained. Similar rules apply for `PREV_INSN'. This means that the above invariants are not necessarily true for insns inside `sequence' expressions. Specifically, if INSN is the first insn in a `sequence', `NEXT_INSN (PREV_INSN (INSN))' is the insn containing the `sequence' expression, as is the value of `PREV_INSN (NEXT_INSN (INSN))' is INSN is the last insn in the `sequence' expression. You can use these expressions to find the containing `sequence' expression. Every insn has one of the following six expression codes: `insn' The expression code `insn' is used for instructions that do not jump and do not do function calls. `sequence' expressions are always contained in insns with code `insn' even if one of those insns should jump or do function calls. Insns with code `insn' have four additional fields beyond the three mandatory ones listed above. These four are described in a table below. `jump_insn' The expression code `jump_insn' is used for instructions that may jump (or, more generally, may contain `label_ref' expressions). If there is an instruction to return from the current function, it is recorded as a `jump_insn'. `jump_insn' insns have the same extra fields as `insn' insns, accessed in the same way and in addition contains a field `JUMP_LABEL' which is defined once jump optimization has completed. For simple conditional and unconditional jumps, this field contains the `code_label' to which this insn will (possibly conditionally) branch. In a more complex jump, `JUMP_LABEL' records one of the labels that the insn refers to; the only way to find the others is to scan the entire body of the insn. Return insns count as jumps, but since they do not refer to any labels, they have zero in the `JUMP_LABEL' field. `call_insn' The expression code `call_insn' is used for instructions that may do function calls. It is important to distinguish these instructions because they imply that certain registers and memory locations may be altered unpredictably. A `call_insn' insn may be preceded by insns that contain a single `use' expression and be followed by insns the contain a single `clobber' expression. If so, these `use' and `clobber' expressions are treated as being part of the function call. There must not even be a `note' between the `call_insn' and the `use' or `clobber' insns for this special treatment to take place. This is somewhat of a kludge and will be removed in a later version of GNU CC. `call_insn' insns have the same extra fields as `insn' insns, accessed in the same way. `code_label' A `code_label' insn represents a label that a jump insn can jump to. It contains two special fields of data in addition to the three standard ones. `CODE_LABEL_NUMBER' is used to hold the "label number", a number that identifies this label uniquely among all the labels in the compilation (not just in the current function). Ultimately, the label is represented in the assembler output as an assembler label, usually of the form `LN' where N is the label number. When a `code_label' appears in an RTL expression, it normally appears within a `label_ref' which represents the address of the label, as a number. The field `LABEL_NUSES' is only defined once the jump optimization phase is completed and contains the number of times this label is referenced in the current function. `barrier' Barriers are placed in the instruction stream when control cannot flow past them. They are placed after unconditional jump instructions to indicate that the jumps are unconditional and after calls to `volatile' functions, which do not return (e.g., `exit'). They contain no information beyond the three standard fields. `note' `note' insns are used to represent additional debugging and declarative information. They contain two nonstandard fields, an integer which is accessed with the macro `NOTE_LINE_NUMBER' and a string accessed with `NOTE_SOURCE_FILE'. If `NOTE_LINE_NUMBER' is positive, the note represents the position of a source line and `NOTE_SOURCE_FILE' is the source file name that the line came from. These notes control generation of line number data in the assembler output. Otherwise, `NOTE_LINE_NUMBER' is not really a line number but a code with one of the following values (and `NOTE_SOURCE_FILE' must contain a null pointer): `NOTE_INSN_DELETED' Such a note is completely ignorable. Some passes of the compiler delete insns by altering them into notes of this kind. `NOTE_INSN_BLOCK_BEG' `NOTE_INSN_BLOCK_END' These types of notes indicate the position of the beginning and end of a level of scoping of variable names. They control the output of debugging information. `NOTE_INSN_LOOP_BEG' `NOTE_INSN_LOOP_END' These types of notes indicate the position of the beginning and end of a `while' or `for' loop. They enable the loop optimizer to find loops quickly. `NOTE_INSN_LOOP_CONT' Appears at the place in a loop that `continue' statements jump to. `NOTE_INSN_LOOP_VTOP' This note indicates the place in a loop where the exit test begins for those loops in which the exit test has been duplicated. This position becomes another virtual start of the loop when considering loop invariants. `NOTE_INSN_FUNCTION_END' Appears near the end of the function body, just before the label that `return' statements jump to (on machine where a single instruction does not suffice for returning). This note may be deleted by jump optimization. `NOTE_INSN_SETJMP' Appears following each call to `setjmp' or a related function. These codes are printed symbolically when they appear in debugging dumps. The machine mode of an insn is normally `VOIDmode', but some phases use the mode for various purposes; for example, the reload pass sets it to `HImode' if the insn needs reloading but not register elimination and `QImode' if both are required. The common subexpression elimination pass sets the mode of an insn to `QImode' when it is the first insn in a block that has already been processed. Here is a table of the extra fields of `insn', `jump_insn' and `call_insn' insns: `PATTERN (I)' An expression for the side effect performed by this insn. This must be one of the following codes: `set', `call', `use', `clobber', `return', `asm_input', `asm_output', `addr_vec', `addr_diff_vec', `trap_if', `unspec', `unspec_volatile', `parallel', or `sequence'. If it is a `parallel', each element of the `parallel' must be one these codes, except that `parallel' expressions cannot be nested and `addr_vec' and `addr_diff_vec' are not permitted inside a `parallel' expression. `INSN_CODE (I)' An integer that says which pattern in the machine description matches this insn, or -1 if the matching has not yet been attempted. Such matching is never attempted and this field remains -1 on an insn whose pattern consists of a single `use', `clobber', `asm_input', `addr_vec' or `addr_diff_vec' expression. Matching is also never attempted on insns that result from an `asm' statement. These contain at least one `asm_operands' expression. The function `asm_noperands' returns a non-negative value for such insns. In the debugging output, this field is printed as a number followed by a symbolic representation that locates the pattern in the `md' file as some small positive or negative offset from a named pattern. `LOG_LINKS (I)' A list (chain of `insn_list' expressions) giving information about dependencies between instructions within a basic block. Neither a jump nor a label may come between the related insns. `REG_NOTES (I)' A list (chain of `expr_list' and `insn_list' expressions) giving miscellaneous information about the insn. It is often information pertaining to the registers used in this insn. The `LOG_LINKS' field of an insn is a chain of `insn_list' expressions. Each of these has two operands: the first is an insn, and the second is another `insn_list' expression (the next one in the chain). The last `insn_list' in the chain has a null pointer as second operand. The significant thing about the chain is which insns appear in it (as first operands of `insn_list' expressions). Their order is not significant. This list is originally set up by the flow analysis pass; it is a null pointer until then. Flow only adds links for those data dependencies which can be used for instruction combination. For each insn, the flow analysis pass adds a link to insns which store into registers values that are used for the first time in this insn. The instruction scheduling pass adds extra links so that every dependence will be represented. Links represent data dependencies, antidependencies and output dependencies; the machine mode of the link distinguishes these three types: antidependencies have mode `REG_DEP_ANTI', output dependencies have mode `REG_DEP_OUTPUT', and data dependencies have mode `VOIDmode'. The `REG_NOTES' field of an insn is a chain similar to the `LOG_LINKS' field but it includes `expr_list' expressions in addition to `insn_list' expressions. There are several kinds of register notes, which are distinguished by the machine mode, which in a register note is really understood as being an `enum reg_note'. The first operand OP of the note is data whose meaning depends on the kind of note. The macro `REG_NOTE_KIND (X)' returns the kind of register note. Its counterpart, the macro `PUT_REG_NOTE_KIND (X, NEWKIND)' sets the register note type of X to be NEWKIND. Register notes are of three classes: They may say something about an input to an insn, they may say something about an output of an insn, or they may create a linkage between two insns. There are also a set of values that are only used in `LOG_LINKS'. These register notes annotate inputs to an insn: `REG_DEAD' The value in OP dies in this insn; that is to say, altering the value immediately after this insn would not affect the future behavior of the program. This does not necessarily mean that the register OP has no useful value after this insn since it may also be an output of the insn. In such a case, however, a `REG_DEAD' note would be redundant and is usually not present until after the reload pass, but no code relies on this fact. `REG_INC' The register OP is incremented (or decremented; at this level there is no distinction) by an embedded side effect inside this insn. This means it appears in a `post_inc', `pre_inc', `post_dec' or `pre_dec' expression. `REG_NONNEG' The register OP is known to have a nonnegative value when this insn is reached. This is used so that decrement and branch until zero instructions, such as the m68k dbra, can be matched. The `REG_NONNEG' note is added to insns only if the machine description has a `decrement_and_branch_until_zero' pattern. `REG_NO_CONFLICT' This insn does not cause a conflict between OP and the item being set by this insn even though it might appear that it does. In other words, if the destination register and OP could otherwise be assigned the same register, this insn does not prevent that assignment. Insns with this note are usually part of a block that begins with a `clobber' insn specifying a multi-word pseudo register (which will be the output of the block), a group of insns that each set one word of the value and have the `REG_NO_CONFLICT' note attached, and a final insn that copies the output to itself with an attached `REG_EQUAL' note giving the expression being computed. This block is encapsulated with `REG_LIBCALL' and `REG_RETVAL' notes on the first and last insns, respectively. `REG_LABEL' This insn uses OP, a `code_label', but is not a `jump_insn'. The presence of this note allows jump optimization to be aware that OP is, in fact, being used. The following notes describe attributes of outputs of an insn: `REG_EQUIV' `REG_EQUAL' This note is only valid on an insn that sets only one register and indicates that that register will be equal to OP at run time; the scope of this equivalence differs between the two types of notes. The value which the insn explicitly copies into the register may look different from OP, but they will be equal at run time. If the output of the single `set' is a `strict_low_part' expression, the note refers to the register that is contained in `SUBREG_REG' of the `subreg' expression. For `REG_EQUIV', the register is equivalent to OP throughout the entire function, and could validly be replaced in all its occurrences by OP. ("Validly" here refers to the data flow of the program; simple replacement may make some insns invalid.) For example, when a constant is loaded into a register that is never assigned any other value, this kind of note is used. When a parameter is copied into a pseudo-register at entry to a function, a note of this kind records that the register is equivalent to the stack slot where the parameter was passed. Although in this case the register may be set by other insns, it is still valid to replace the register by the stack slot throughout the function. In the case of `REG_EQUAL', the register that is set by this insn will be equal to OP at run time at the end of this insn but not necessarily elsewhere in the function. In this case, OP is typically an arithmetic expression. For example, when a sequence of insns such as a library call is used to perform an arithmetic operation, this kind of note is attached to the insn that produces or copies the final value. These two notes are used in different ways by the compiler passes. `REG_EQUAL' is used by passes prior to register allocation (such as common subexpression elimination and loop optimization) to tell them how to think of that value. `REG_EQUIV' notes are used by register allocation to indicate that there is an available substitute expression (either a constant or a `mem' expression for the location of a parameter on the stack) that may be used in place of a register if insufficient registers are available. Except for stack homes for parameters, which are indicated by a `REG_EQUIV' note and are not useful to the early optimization passes and pseudo registers that are equivalent to a memory location throughout there entire life, which is not detected until later in the compilation, all equivalences are initially indicated by an attached `REG_EQUAL' note. In the early stages of register allocation, a `REG_EQUAL' note is changed into a `REG_EQUIV' note if OP is a constant and the insn represents the only set of its destination register. Thus, compiler passes prior to register allocation need only check for `REG_EQUAL' notes and passes subsequent to register allocation need only check for `REG_EQUIV' notes. `REG_UNUSED' The register OP being set by this insn will not be used in a subsequent insn. This differs from a `REG_DEAD' note, which indicates that the value in an input will not be used subsequently. These two notes are independent; both may be present for the same register. `REG_WAS_0' The single output of this insn contained zero before this insn. OP is the insn that set it to zero. You can rely on this note if it is present and OP has not been deleted or turned into a `note'; its absence implies nothing. These notes describe linkages between insns. They occur in pairs: one insn has one of a pair of notes that points to a second insn, which has the inverse note pointing back to the first insn. `REG_RETVAL' This insn copies the value of a multi-insn sequence (for example, a library call), and OP is the first insn of the sequence (for a library call, the first insn that was generated to set up the arguments for the library call). Loop optimization uses this note to treat such a sequence as a single operation for code motion purposes and flow analysis uses this note to delete such sequences whose results are dead. A `REG_EQUAL' note will also usually be attached to this insn to provide the expression being computed by the sequence. `REG_LIBCALL' This is the inverse of `REG_RETVAL': it is placed on the first insn of a multi-insn sequence, and it points to the last one. `REG_CC_SETTER' `REG_CC_USER' On machines that use `cc0', the insns which set and use `cc0' set and use `cc0' are adjacent. However, when branch delay slot filling is done, this may no longer be true. In this case a `REG_CC_USER' note will be placed on the insn setting `cc0' to point to the insn using `cc0' and a `REG_CC_SETTER' note will be placed on the insn using `cc0' to point to the insn setting `cc0'. These values are only used in the `LOG_LINKS' field, and indicate the type of dependency that each link represents. Links which indicate a data dependence (a read after write dependence) do not use any code, they simply have mode `VOIDmode', and are printed without any descriptive text. `REG_DEP_ANTI' This indicates an anti dependence (a write after read dependence). `REG_DEP_OUTPUT' This indicates an output dependence (a write after write dependence). For convenience, the machine mode in an `insn_list' or `expr_list' is printed using these symbolic codes in debugging dumps. The only difference between the expression codes `insn_list' and `expr_list' is that the first operand of an `insn_list' is assumed to be an insn and is printed in debugging dumps as the insn's unique id; the first operand of an `expr_list' is printed in the ordinary way as an expression. File: gcc.info, Node: Calls, Next: Sharing, Prev: Insns, Up: RTL RTL Representation of Function-Call Insns ========================================= Insns that call subroutines have the RTL expression code `call_insn'. These insns must satisfy special rules, and their bodies must use a special RTL expression code, `call'. A `call' expression has two operands, as follows: (call (mem:FM ADDR) NBYTES) Here NBYTES is an operand that represents the number of bytes of argument data being passed to the subroutine, FM is a machine mode (which must equal as the definition of the `FUNCTION_MODE' macro in the machine description) and ADDR represents the address of the subroutine. For a subroutine that returns no value, the `call' expression as shown above is the entire body of the insn, except that the insn might also contain `use' or `clobber' expressions. For a subroutine that returns a value whose mode is not `BLKmode', the value is returned in a hard register. If this register's number is R, then the body of the call insn looks like this: (set (reg:M R) (call (mem:FM ADDR) NBYTES)) This RTL expression makes it clear (to the optimizer passes) that the appropriate register receives a useful value in this insn. When a subroutine returns a `BLKmode' value, it is handled by passing to the subroutine the address of a place to store the value. So the call insn itself does not "return" any value, and it has the same RTL form as a call that returns nothing. On some machines, the call instruction itself clobbers some register, for example to contain the return address. `call_insn' insns on these machines should have a body which is a `parallel' that contains both the `call' expression and `clobber' expressions that indicate which registers are destroyed. Similarly, if the call instruction requires some register other than the stack pointer that is not explicitly mentioned it its RTL, a `use' subexpression should mention that register. Functions that are called are assumed to modify all registers listed in the configuration macro `CALL_USED_REGISTERS' (*note Register Basics::.) and, with the exception of `const' functions and library calls, to modify all of memory. Insns containing just `use' expressions directly precede the `call_insn' insn to indicate which registers contain inputs to the function. Similarly, if registers other than those in `CALL_USED_REGISTERS' are clobbered by the called function, insns containing a single `clobber' follow immediately after the call to indicate which registers. File: gcc.info, Node: Sharing, Next: Reading RTL, Prev: Calls, Up: RTL Structure Sharing Assumptions ============================= The compiler assumes that certain kinds of RTL expressions are unique; there do not exist two distinct objects representing the same value. In other cases, it makes an opposite assumption: that no RTL expression object of a certain kind appears in more than one place in the containing structure. These assumptions refer to a single function; except for the RTL objects that describe global variables and external functions, and a few standard objects such as small integer constants, no RTL objects are common to two functions. * Each pseudo-register has only a single `reg' object to represent it, and therefore only a single machine mode. * For any symbolic label, there is only one `symbol_ref' object referring to it. * There is only one `const_int' expression with value 0, only one with value 1, and only one with value -1. Some other integer values are also stored uniquely. * There is only one `pc' expression. * There is only one `cc0' expression. * There is only one `const_double' expression with value 0 for each floating point mode. Likewise for values 1 and 2. * No `label_ref' or `scratch' appears in more than one place in the RTL structure; in other words, it is safe to do a tree-walk of all the insns in the function and assume that each time a `label_ref' or `scratch' is seen it is distinct from all others that are seen. * Only one `mem' object is normally created for each static variable or stack slot, so these objects are frequently shared in all the places they appear. However, separate but equal objects for these variables are occasionally made. * When a single `asm' statement has multiple output operands, a distinct `asm_operands' expression is made for each output operand. However, these all share the vector which contains the sequence of input operands. This sharing is used later on to test whether two `asm_operands' expressions come from the same statement, so all optimizations must carefully preserve the sharing if they copy the vector at all. * No RTL object appears in more than one place in the RTL structure except as described above. Many passes of the compiler rely on this by assuming that they can modify RTL objects in place without unwanted side-effects on other insns. * During initial RTL generation, shared structure is freely introduced. After all the RTL for a function has been generated, all shared structure is copied by `unshare_all_rtl' in `emit-rtl.c', after which the above rules are guaranteed to be followed. * During the combiner pass, shared structure within an insn can exist temporarily. However, the shared structure is copied before the combiner is finished with the insn. This is done by calling `copy_rtx_if_shared', which is a subroutine of `unshare_all_rtl'. File: gcc.info, Node: Reading RTL, Prev: Sharing, Up: RTL Reading RTL =========== To read an RTL object from a file, call `read_rtx'. It takes one argument, a stdio stream, and returns a single RTL object. Reading RTL from a file is very slow. This is no currently not a problem because reading RTL occurs only as part of building the compiler. People frequently have the idea of using RTL stored as text in a file as an interface between a language front end and the bulk of GNU CC. This idea is not feasible. GNU CC was designed to use RTL internally only. Correct RTL for a given program is very dependent on the particular target machine. And the RTL does not contain all the information about the program. The proper way to interface GNU CC to a new language front end is with the "tree" data structure. There is no manual for this data structure, but it is described in the files `tree.h' and `tree.def'. File: gcc.info, Node: Machine Desc, Next: Target Macros, Prev: RTL, Up: Top Machine Descriptions ******************** A machine description has two parts: a file of instruction patterns (`.md' file) and a C header file of macro definitions. The `.md' file for a target machine contains a pattern for each instruction that the target machine supports (or at least each instruction that is worth telling the compiler about). It may also contain comments. A semicolon causes the rest of the line to be a comment, unless the semicolon is inside a quoted string. See the next chapter for information on the C header file. * Menu: * Patterns:: How to write instruction patterns. * Example:: An explained example of a `define_insn' pattern. * RTL Template:: The RTL template defines what insns match a pattern. * Output Template:: The output template says how to make assembler code from such an insn. * Output Statement:: For more generality, write C code to output the assembler code. * Constraints:: When not all operands are general operands. * Standard Names:: Names mark patterns to use for code generation. * Pattern Ordering:: When the order of patterns makes a difference. * Dependent Patterns:: Having one pattern may make you need another. * Jump Patterns:: Special considerations for patterns for jump insns. * Insn Canonicalizations::Canonicalization of Instructions * Peephole Definitions::Defining machine-specific peephole optimizations. * Expander Definitions::Generating a sequence of several RTL insns for a standard operation. * Insn Splitting:: Splitting Instructions into Multiple Instructions * Insn Attributes:: Specifying the value of attributes for generated insns. File: gcc.info, Node: Patterns, Next: Example, Up: Machine Desc Everything about Instruction Patterns ===================================== Each instruction pattern contains an incomplete RTL expression, with pieces to be filled in later, operand constraints that restrict how the pieces can be filled in, and an output pattern or C code to generate the assembler output, all wrapped up in a `define_insn' expression. A `define_insn' is an RTL expression containing four or five operands: 1. An optional name. The presence of a name indicate that this instruction pattern can perform a certain standard job for the RTL-generation pass of the compiler. This pass knows certain names and will use the instruction patterns with those names, if the names are defined in the machine description. The absence of a name is indicated by writing an empty string where the name should go. Nameless instruction patterns are never used for generating RTL code, but they may permit several simpler insns to be combined later on. Names that are not thus known and used in RTL-generation have no effect; they are equivalent to no name at all. 2. The "RTL template" (*note RTL Template::.) is a vector of incomplete RTL expressions which show what the instruction should look like. It is incomplete because it may contain `match_operand', `match_operator', and `match_dup' expressions that stand for operands of the instruction. If the vector has only one element, that element is the template for the instruction pattern. If the vector has multiple elements, then the instruction pattern is a `parallel' expression containing the elements described. 3. A condition. This is a string which contains a C expression that is the final test to decide whether an insn body matches this pattern. For a named pattern, the condition (if present) may not depend on the data in the insn being matched, but only the target-machine-type flags. The compiler needs to test these conditions during initialization in order to learn exactly which named instructions are available in a particular run. For nameless patterns, the condition is applied only when matching an individual insn, and only after the insn has matched the pattern's recognition template. The insn's operands may be found in the vector `operands'. 4. The "output template": a string that says how to output matching insns as assembler code. `%' in this string specifies where to substitute the value of an operand. *Note Output Template::. When simple substitution isn't general enough, you can specify a piece of C code to compute the output. *Note Output Statement::. 5. Optionally, a vector containing the values of attributes for insns matching this pattern. *Note Insn Attributes::. File: gcc.info, Node: Example, Next: RTL Template, Prev: Patterns, Up: Machine Desc Example of `define_insn' ======================== Here is an actual example of an instruction pattern, for the 68000/68020. (define_insn "tstsi" [(set (cc0) (match_operand:SI 0 "general_operand" "rm"))] "" "* { if (TARGET_68020 || ! ADDRESS_REG_P (operands[0])) return \"tstl %0\"; return \"cmpl #0,%0\"; }") This is an instruction that sets the condition codes based on the value of a general operand. It has no condition, so any insn whose RTL description has the form shown may be handled according to this pattern. The name `tstsi' means "test a `SImode' value" and tells the RTL generation pass that, when it is necessary to test such a value, an insn to do so can be constructed using this pattern. The output control string is a piece of C code which chooses which output template to return based on the kind of operand and the specific type of CPU for which code is being generated. `"rm"' is an operand constraint. Its meaning is explained below. File: gcc.info, Node: RTL Template, Next: Output Template, Prev: Example, Up: Machine Desc RTL Template ============ The RTL template is used to define which insns match the particular pattern and how to find their operands. For named patterns, the RTL template also says how to construct an insn from specified operands. Construction involves substituting specified operands into a copy of the template. Matching involves determining the values that serve as the operands in the insn being matched. Both of these activities are controlled by special expression types that direct matching and substitution of the operands. `(match_operand:M N PREDICATE CONSTRAINT)' This expression is a placeholder for operand number N of the insn. When constructing an insn, operand number N will be substituted at this point. When matching an insn, whatever appears at this position in the insn will be taken as operand number N; but it must satisfy PREDICATE or this instruction pattern will not match at all. Operand numbers must be chosen consecutively counting from zero in each instruction pattern. There may be only one `match_operand' expression in the pattern for each operand number. Usually operands are numbered in the order of appearance in `match_operand' expressions. PREDICATE is a string that is the name of a C function that accepts two arguments, an expression and a machine mode. During matching, the function will be called with the putative operand as the expression and M as the mode argument (if M is not specified, `VOIDmode' will be used, which normally causes PREDICATE to accept any mode). If it returns zero, this instruction pattern fails to match. PREDICATE may be an empty string; then it means no test is to be done on the operand, so anything which occurs in this position is valid. Most of the time, PREDICATE will reject modes other than M--but not always. For example, the predicate `address_operand' uses M as the mode of memory ref that the address should be valid for. Many predicates accept `const_int' nodes even though their mode is `VOIDmode'. CONSTRAINT controls reloading and the choice of the best register class to use for a value, as explained later (*note Constraints::.). People are often unclear on the difference between the constraint and the predicate. The predicate helps decide whether a given insn matches the pattern. The constraint plays no role in this decision; instead, it controls various decisions in the case of an insn which does match. On CISC machines, the most common PREDICATE is `"general_operand"'. This function checks that the putative operand is either a constant, a register or a memory reference, and that it is valid for mode M. For an operand that must be a register, PREDICATE should be `"register_operand"'. Using `"general_operand"' would be valid, since the reload pass would copy any non-register operands through registers, but this would make GNU CC do extra work, it would prevent invariant operands (such as constant) from being removed from loops, and it would prevent the register allocator from doing the best possible job. On RISC machines, it is usually most efficient to allow PREDICATE to accept only objects that the constraints allow. For an operand that must be a constant, you must be sure to either use `"immediate_operand"' for PREDICATE, or make the instruction pattern's extra condition require a constant, or both. You cannot expect the constraints to do this work! If the constraints allow only constants, but the predicate allows something else, the compiler will crash when that case arises. `(match_scratch:M N CONSTRAINT)' This expression is also a placeholder for operand number N and indicates that operand must be a `scratch' or `reg' expression. When matching patterns, this is completely equivalent to (match_operand:M N "scratch_operand" PRED) but, when generating RTL, it produces a (`scratch':M) expression. If the last few expressions in a `parallel' are `clobber' expressions whose operands are either a hard register or `match_scratch', the combiner can add them when necessary. *Note Side Effects::. `(match_dup N)' This expression is also a placeholder for operand number N. It is used when the operand needs to appear more than once in the insn. In construction, `match_dup' acts just like `match_operand': the operand is substituted into the insn being constructed. But in matching, `match_dup' behaves differently. It assumes that operand number N has already been determined by a `match_operand' appearing earlier in the recognition template, and it matches only an identical-looking expression. `(match_operator:M N PREDICATE [OPERANDS...])' This pattern is a kind of placeholder for a variable RTL expression code. When constructing an insn, it stands for an RTL expression whose expression code is taken from that of operand N, and whose operands are constructed from the patterns OPERANDS. When matching an expression, it matches an expression if the function PREDICATE returns nonzero on that expression *and* the patterns OPERANDS match the operands of the expression. Suppose that the function `commutative_operator' is defined as follows, to match any expression whose operator is one of the commutative arithmetic operators of RTL and whose mode is MODE: int commutative_operator (x, mode) rtx x; enum machine_mode mode; { enum rtx_code code = GET_CODE (x); if (GET_MODE (x) != mode) return 0; return (GET_RTX_CLASS (code) == 'c' || code == EQ || code == NE); } Then the following pattern will match any RTL expression consisting of a commutative operator applied to two general operands: (match_operator:SI 3 "commutative_operator" [(match_operand:SI 1 "general_operand" "g") (match_operand:SI 2 "general_operand" "g")]) Here the vector `[OPERANDS...]' contains two patterns because the expressions to be matched all contain two operands. When this pattern does match, the two operands of the commutative operator are recorded as operands 1 and 2 of the insn. (This is done by the two instances of `match_operand'.) Operand 3 of the insn will be the entire commutative expression: use `GET_CODE (operands[3])' to see which commutative operator was used. The machine mode M of `match_operator' works like that of `match_operand': it is passed as the second argument to the predicate function, and that function is solely responsible for deciding whether the expression to be matched "has" that mode. When constructing an insn, argument 3 of the gen-function will specify the operation (i.e. the expression code) for the expression to be made. It should be an RTL expression, whose expression code is copied into a new expression whose operands are arguments 1 and 2 of the gen-function. The subexpressions of argument 3 are not used; only its expression code matters. When `match_operator' is used in a pattern for matching an insn, it usually best if the operand number of the `match_operator' is higher than that of the actual operands of the insn. This improves register allocation because the register allocator often looks at operands 1 and 2 of insns to see if it can do register tying. There is no way to specify constraints in `match_operator'. The operand of the insn which corresponds to the `match_operator' never has any constraints because it is never reloaded as a whole. However, if parts of its OPERANDS are matched by `match_operand' patterns, those parts may have constraints of their own. `(match_op_dup:M N[OPERANDS...])' Like `match_dup', except that it applies to operators instead of operands. When constructing an insn, operand number N will be substituted at this point. But in matching, `match_op_dup' behaves differently. It assumes that operand number N has already been determined by a `match_operator' appearing earlier in the recognition template, and it matches only an identical-looking expression. `(match_parallel N PREDICATE [SUBPAT...])' This pattern is a placeholder for an insn that consists of a `parallel' expression with a variable number of elements. This expression should only appear at the top level of an insn pattern. When constructing an insn, operand number N will be substituted at this point. When matching an insn, it matches if the body of the insn is a `parallel' expression with at least as many elements as the vector of SUBPAT expressions in the `match_parallel', if each SUBPAT matches the corresponding element of the `parallel', *and* the function PREDICATE returns nonzero on the `parallel' that is the body of the insn. It is the responsibility of the predicate to validate elements of the `parallel' beyond those listed in the `match_parallel'. A typical use of `match_parallel' is to match load and store multiple expressions, which can contains a variable number of elements in a `parallel'. For example, (define_insn "" [(match_parallel 0 "load_multiple_operation" [(set (match_operand:SI 1 "gpc_reg_operand" "=r") (match_operand:SI 2 "memory_operand" "m")) (use (reg:SI 179)) (clobber (reg:SI 179))])] "" "loadm 0,0,%1,%2") This example comes from `a29k.md'. The function `load_multiple_operations' is defined in `a29k.c' and checks that subsequent elements in the `parallel' are the same as the `set' in the pattern, except that they are referencing subsequent registers and memory locations. An insn that matches this pattern might look like: (parallel [(set (reg:SI 20) (mem:SI (reg:SI 100))) (use (reg:SI 179)) (clobber (reg:SI 179)) (set (reg:SI 21) (mem:SI (plus:SI (reg:SI 100) (const_int 4)))) (set (reg:SI 22) (mem:SI (plus:SI (reg:SI 100) (const_int 8))))]) `(match_par_dup N [SUBPAT...])' Like `match_op_dup', but for `match_parallel' instead of `match_operator'. `(address (match_operand:M N "address_operand" ""))' This complex of expressions is a placeholder for an operand number N in a "load address" instruction: an operand which specifies a memory location in the usual way, but for which the actual operand value used is the address of the location, not the contents of the location. `address' expressions never appear in RTL code, only in machine descriptions. And they are used only in machine descriptions that do not use the operand constraint feature. When operand constraints are in use, the letter `p' in the constraint serves this purpose. M is the machine mode of the *memory location being addressed*, not the machine mode of the address itself. That mode is always the same on a given target machine (it is `Pmode', which normally is `SImode'), so there is no point in mentioning it; thus, no machine mode is written in the `address' expression. If some day support is added for machines in which addresses of different kinds of objects appear differently or are used differently (such as the PDP-10), different formats would perhaps need different machine modes and these modes might be written in the `address' expression. File: gcc.info, Node: Output Template, Next: Output Statement, Prev: RTL Template, Up: Machine Desc Output Templates and Operand Substitution ========================================= The "output template" is a string which specifies how to output the assembler code for an instruction pattern. Most of the template is a fixed string which is output literally. The character `%' is used to specify where to substitute an operand; it can also be used to identify places where different variants of the assembler require different syntax. In the simplest case, a `%' followed by a digit N says to output operand N at that point in the string. `%' followed by a letter and a digit says to output an operand in an alternate fashion. Four letters have standard, built-in meanings described below. The machine description macro `PRINT_OPERAND' can define additional letters with nonstandard meanings. `%cDIGIT' can be used to substitute an operand that is a constant value without the syntax that normally indicates an immediate operand. `%nDIGIT' is like `%cDIGIT' except that the value of the constant is negated before printing. `%aDIGIT' can be used to substitute an operand as if it were a memory reference, with the actual operand treated as the address. This may be useful when outputting a "load address" instruction, because often the assembler syntax for such an instruction requires you to write the operand as if it were a memory reference. `%lDIGIT' is used to substitute a `label_ref' into a jump instruction. `%=' outputs a number which is unique to each instruction in the entire compilation. This is useful for making local labels to be referred to more than once in a single template that generates multiple assembler instructions. `%' followed by a punctuation character specifies a substitution that does not use an operand. Only one case is standard: `%%' outputs a `%' into the assembler code. Other nonstandard cases can be defined in the `PRINT_OPERAND' macro. You must also define which punctuation characters are valid with the `PRINT_OPERAND_PUNCT_VALID_P' macro. The template may generate multiple assembler instructions. Write the text for the instructions, with `\;' between them. When the RTL contains two operands which are required by constraint to match each other, the output template must refer only to the lower-numbered operand. Matching operands are not always identical, and the rest of the compiler arranges to put the proper RTL expression for printing into the lower-numbered operand. One use of nonstandard letters or punctuation following `%' is to distinguish between different assembler languages for the same machine; for example, Motorola syntax versus MIT syntax for the 68000. Motorola syntax requires periods in most opcode names, while MIT syntax does not. For example, the opcode `movel' in MIT syntax is `move.l' in Motorola syntax. The same file of patterns is used for both kinds of output syntax, but the character sequence `%.' is used in each place where Motorola syntax wants a period. The `PRINT_OPERAND' macro for Motorola syntax defines the sequence to output a period; the macro for MIT syntax defines it to do nothing. As a special case, a template consisting of the single character `#' instructs the compiler to first split the insn, and then output the resulting instructions separately. This helps eliminate redundancy in the output templates. If you have a `define_insn' that needs to emit multiple assembler instructions, and there is an matching `define_split' already defined, then you can simply use `#' as the output template instead of writing an output template that emits the multiple assembler instructions. If `ASSEMBLER_DIALECT' is defined, you can use `{option0|option1|option2}' constructs in the templates. These describe multiple variants of assembler language syntax. *Note Instruction Output::.