QuickLink Documentation Update


VT100/VT102/VT52 key mappings:

    Use the following table when using the VT terminal emulators.

        VT Key              PC Key (equivalence)
    ================================================
    Function
    --------
    PF1                     Alt F1
    PF2                     Alt F2
    PF3                     Alt F3
    PF4                     Alt F4

    Application Keypad Mode
    -----------------------
    Keypad 0            Alt 0 Keypad or Main Keyboard
    Keypad 1            Alt 1 Keypad or Main Keyboard
    Keypad 2            Alt 2 Keypad or Main Keyboard
    Keypad 3            Alt 3 Keypad or Main Keyboard
    Keypad 4            Alt 4 Keypad or Main Keyboard
    Keypad 5            Alt 5 Keypad or Main Keyboard
    Keypad 6            Alt 6 Keypad or Main Keyboard
    Keypad 7            Alt 7 Keypad or Main Keyboard
    Keypad 8            Alt 8 Keypad or Main Keyboard
    Keypad 9            Alt 9 Keypad or Main Keyboard
    Keypad - (minus)    Alt - Keypad or Main Keyboard
    Keypad , (comma)    Alt + Keypad or Alt , Main Keyboard
    Keypad . (period)   Alt . Keypad or Main Keyboard
    Keypad ENTER        Alt ENTER Keypad or Alt = Main Keyboard

    Cursor Keys
    -----------
    All PC cursor keys are mapped the same as the VT's.

    PC NumLock
    ----------
    If the PC has NumLock on, the keypad will type numbers.
    If NumLock is off, the keypad cursor keys are used.  
    NumLock is ignored when using application keypad mode keys.


Windows For Workgroups 3.11:

    To maximize the efficiency of the com port driver used by 
    WFW 3.11, the following lines can be added to the 386Ehn 
    section of the system.ini file.

    Com4Buffer=4096
    Com4FIFO=2
    Com4TXFIFO=1
    Com4RXTrigger=8
    Com4Protocol=XOFF
    ComBoostTime=30

    If your modem is not attached to port 4, replace "Com4" in
    the previous lines with the number of the port that your
    modem is attached to.  ComBoostTime does not have a port 
    number associated with it.


Caller ID:

    Caller ID is a special service that can be ordered from most
    phone service companies.  This service provides information
    about an incoming phone call.

    If QuickLink II Fax was supplied with caller ID capabilities,
    you will find the "Call Log" located under the "Connect" menu.
    The "Call Log" will display the caller ID information for the
    last 200 calls.  It is important to note that caller ID
    information will not be placed into the "Call Log" unless
    QuickLink's terminal window is open or the FaxManager is
    receiving calls.

    If you would like to log the caller ID for all incoming calls
    but you don't want QuickLink to answer the phone, take the
    following steps:

    1. Start the main QuickLink application and open the terminal
       window.  QuickLink should now have access to your modem.
       You can verify this by typing "AT" in the terminal window
       and pressing Return.  The modem should respond OK.

    2. Select "Modem Setup" from the "Setup" menu and verify that
       "Caller ID Active" is checked. Set the Answer Mode to
       "Ignore Ring" which will prevent QuickLink from answering
       the incoming calls. Close the Modem Setup dialog.

    4. Select "Call Log" from the "Connect" menu in order to view
       the caller ID information.  The "Call Log" may remain active
       even while new calls are being received.

    Please note that the caller ID does not include the name of
    the caller in all cases.  This will cause the "Name" field of
    the "Call Log" to be blank.

    The data displayed in the call log can be found in the file
    "caller.log".  This is a tab delimited text file which may
    be printed or imported into a data base program.


OCR:

    If QuickLink II Fax was supplied with OCR capabilities, 
    a reference card will be included with your manual.

    If OCR capabilities were not included, you may upgrade
    to QuickLink Gold.  QuickLink Gold provides faxing, data
    communications and OCR in one package.  Other features
    include host mode, QuickFaxing and a customizable look 
    and feel.  QuickLink Gold may be ordered by calling our
    bulletin board system, American E-Mail at (714) 362-5822.