FOR AUTHORIZED DEALER USE ONLY - Not for use in Pennsylvania
 | Manufacturer: | Siemens Private Comunication Systems Group |
| Model: | Siemens S3 com (also look S4 and Sony CM DX 1000) | |
| Type: | ||
| Batery Type: | 6v 550 mAh NiMh Cadmium free battery | |
| Made in: | GERMANY | |
| Compatibility: | With S4 and Sony CM DX 1000 models |
Length: 157 mm Width: 58 mm Thickness: 22 mm Volume: 180 cc Weight: 260 g Standby time: 20 hours Talk time: 100 minutes Charging time: 1 hour Power Rating: GSM Class 4 (2 watt) LCD graphic display: high-resolution, 97x33 pixels, 4 lines, 16 characters per line Card: Full size SIM card Antenna : Helix 157 mm Test Mode: Yes IMEI: You can look it only with the Keyboard.
The Siemens S3 Com series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.
Note: Now Monitor should appear at the bottom of the Network Options menu.
Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes
Monitor Mode 01 Indicator Explanation Values CH Channel Number xxx RX Signal Strength (dB). dB N NCC (Color Code) 1-7 B BCC (Color Code) 1-7 CI Cell ID (in Hex) xxxx C1+ how long before phone does forced hand over. (C1+ = RXAM - RX) xx LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC xxXXxx xxxx TXPWR Transmit Power (dB) dB RXAM Receive signal strength cut-off point 102
Monitor Mode 01 (call in progress) Indicator Explanation Values TS Time Slot Number TA Timing Advance. Distance from tower in Km X 2 PL Power Level PL RX Signal Strength (dB). dB N NCC (Color Code) 1-7 B BCC (Color Code) 1-7 CI Cell ID (in Hex) xxxx LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC xxXXxx xxxx LF C1 value with continuous transmisson from tower 51 LS C1 Value with discontinuous tranmission from tower 52 QF Bit Error Rate with continuous transmission from tower BER QS Bit Error Rate with discontinuous transmission from tower BER
Monitor Mode 02 list of strongest signals Indicator Explanation Values List Number 1-6 CH Channel Number xxx RL Signal Strength (dB). dB RM Receive signal strength cut-off point(-100) 02 TX Transmit Power (dB) dB N NCC (Color Code) 1-7 B BCC (Color Code) 1-7
Power Table PL/dBs/Watts
PL: 5 6 7 8 9 10 11 12 13 14 15 dB: 33 31 29 27 25 23 21 19 17 15 13 Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02
BER Bit Error Rate table
QF/QS register: 0 1 2 3 4 5 6 7 % of bit sent: 0.2 0.4 0.8 1.6 3.2 6.4 12.8 25.6
Design by: Lucky Luciano
Radiophone Maintainer: Doctor Who
© 1994-1996 Copyright Sinister Networks. All rights reserved. May not be redistributed or modified without permission of Sinister Networks.
Fnord.