-------------------------------------------------------------------------------
CLARION 1100 CT
-------------------------------------------------------------------------------
NAM Type: Tri-State
Manufacturer: Clarion
Programmer: Motorola 1801 -- Celnam, Curtis or Bytek
ESN Prefix DEC: 140
HEX: 8C
ESN, S/N Match Required: No
Programmable Handset: No
Available Channels: 832
Phone Number Format: XXX-XXX-XXXX
Lock Code Format: XXX
MIN Option: Enabled
Repertory Option: Enabled
Handsfree Option: Enabled or Disabled
Local Use Option: Enabled
End-to-End Signalling: Enabled
Horn Alert Option: Enabled
System ID Format: XXXXX
Preferred System: A or B
Access Overload Class: XX
Group ID Format: XX
Initial Paging Channel: 333 or 334
Station Class: 08
Horn Alert: L/H + HORN/# (simultaneously)
New Unlock Code: NAM
System Select: FUNC + 2 + 0 + SRCH + SRCH +
SRCH (to scroll)
(one of the following will appear)
Standard (AB or BA)
Invert (BA or AB)
Home
Roam (A only or B only)
Press STO to enter selection
-------------------------------------------------------------------------------
CLARION 3000 CT
-------------------------------------------------------------------------------
NAM Type: EEPROM
Manufacturer: Clarion
Programmer: Handset
ESN Prefix DEC: 166
HEX: A6
ESN, S/N Match Required: Yes
Available Channels: 832
Programming Sequence: Power On (Err 3 may be displayed if
phone has not been programmed)
Press CLR + * + * + 123123 + # + # (within 10
seconds)
0 will be displayed
Select NAM 1 thru 3 by entering 1, 2 or 3
Press RCL + step number + enter new information
+ STO (for each step)
(To enter unlock code 123; RCL + ) + 123 + STO)
Power OFF to exit program mode
Unlock Code: 3or4 XXX or XXXX + STO
System ID Format: 5 XXXXX + STO
Local Use Option: 1 1 + STO
MIN Option: 1 1 + STO
Mobile Number: 10 XXX-XXX-XXXX + STO
Station Class: 2 08 + STO
Initial Paging Channel: 3 333 or 334 + STO
Access Overload Class: 2 XX + STO
Preferred System: 1 1(A) or 0(B) + STO
Group Id Format: 2 XX + STO
Power OFF to exit program mode.
-------------------------------------------------------------------------------
CLARION 5100CT and 5200CT
-------------------------------------------------------------------------------
NAM Type: EEPROM
Manufacturer: Clarion
Programmer: Keypad
ESN Prefix DEC: 166
HEX: A6
ESN, S/N Match Required: Yes
Stamped Model Number: None (handset is labeled 5100CT or 5200CT)
Available Channels: 832
Programming Sequence: Power On (Err 3 may be displayed if
phone has not been programmed)
Press CLR + * + * + 123123 + # + # (within 10
seconds)
0 will be displayed
Select NAM 1 thru 3 by entering 1, 2 or 3
Press RCL + step number + enter new information
+ STO (for each step)
(to enter station class; RCL + 5 + 08 + STO)
Power OFF to exit program mode
Unlock Code: 3or4 XXX or XXXX + STO
System ID Format: 5 XXXXX + STO
Local Use Option: 1 1 + STO
MIN Option: 1 1 + STO
Mobile Number: 10 XXX-XXX-XXXX + STO
Station Class: 2 08 + STO
Initial Paging Channel: 3 333 or 334 + STO
Access Overload Class: 2 XX + STO
Preferred System: 1 1(A) or 0(B) + STO
Group ID Format: 2 XX + STO
Power OFF to exit program mode.
Display ESN: FCN + 6
Horn Alert: FCN + 8 + "+ or -"
New Unlock Code: NAM
System Select: FCN + 4 + "+ or -" (to scroll choices) + STO
© 1994-1996 Copyright Sinister Networks. All rights reserved. May not be redistributed or modified without permission of Sinister Networks. Do not fold, spindle, or mutilate. Fnord.
Other names and marks used in here are the property of their respective owners, until and unless decided otherwise in a valid court of law. The absence of a service mark, trademark symbol or fnordmark in connection with the marks identifying products or services of other vendors does not indicate the absence of registration of those marks or devices. All marks identified herein are used or registered in the United States of America and may or may not be used and/or registered in other countries and planets.