Antel Cellular Phones
THis series of phones was manufactuered by General Electric
ANTEL 100 (Lenex LNX-100)/ NTX-110 / (Lenex LNX-200) / NTX-220 / STR-300 /
330 / 500 / 550 / 700 / 770 / 900 / 950X
Dual NAM
Antel: 516-273-8000
NAM Programing:
1. Enter 04049, FCN, FCN.
2. The phone's ESN (step 01 below) will be displayed.
3. SEND is used to store and increment the step number. If an invalid
entry is made the display will not increment.
4. END is used to complete and exit programing at any time.
5. CLR is used to correct an entry.
PROGRAMING DATA:
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
01 CAN NOT BE CHANGED ESN ESN (Not Displayed on 100, 200?)
02 3 DIGITS AREACD AREA CODE
03 7 DIGITS PHONE MIN (PHONE #)
04 00000 - 32767 SYSID SYSTEM ID
05 0 OR 1 LOCAL LOCAL USE
06 0 OR 1 MINMARK MIN MARK
07 0333 or 0334 IPCH INITIAL PAGING CHANNEL
08 00 TO 15 ACCOLC ACCESS OVERLOAD
09 0 OR 1 PRESYS PREFERRED SYSTEM
10 00 TO 15 GROUP GROUP ID (10 FOR USA)
11 4 DIGITS SEC CODE SECURITY CODE
12 0 OR 1 HANDFREE 1 = YES, 0 = NO
13 0 OR 1 HORNALRT 1 = YES, 0 = NO
14 0 OR 1 AUTONREG SEE NOTE 1
15 0 OR 1 WHERE SEE NOTE 2
16 0 OR 1 BEEP 1 = 60 SEC BEEP (45 Sec. on
200), 0 = NO BEEP
17 0 OR 1 CTONE CONTINUOUS DTMF
18 0 OR 1 DUAL NAM DUAL NAM
If dual nam is set to 1 then step 2 thru 10 will alternate between NAM 1
and NAM 2 each time you scroll through the data.
Notes: 1. A "1" enables the phone to auto register when roaming.
2. A "1" makes the phone alert all non home systems upon entry.
LOCK - Press F * and hold * for two seconds. UNLOCK - CLR then three digit
lock code.
SYSTEM SELECT: F51 = A/B, F52 = B/A, F53 = A ONLY, F54 = B ONLY,