[MainMenu]
            MAIN MENU HELP

Select the desired option using the
cursor keys and press ENTER.  Optionally,
you may "click" the left mouse button on
the desired option.

The first letter of each option works as
a "hot-key".  You may also invoke an
option simple by pressing its correspond-
ing hotkey.
[PackSel]
                     PACKET SELECTION HELP

To select a packet to open for reading, simply use the cursor keys
to highlight the desired packet and then press ENTER.  Optionally,
you may "click" on the desired packet with the left mouse button.

Paging through a large file list is possible by pressing PAGE UP and
PAGE DOWN.  Also, the arrow keys will cause the display to scroll
up/down as necessary.

Pressing ESCAPE will exit MR/2 and return you to the OS/2 command
line.  Use ALT-E to enter message w/o an existing packet.

Also, ALT-C will take you into your editor for modifications of the
MR2.INI file.  ALT-P edits the Packet Path.  Alt-N relists packets.

While any packet is highlighted, you may use ALT-D to delete the
marked packet (after confirmation) or ALT-R to rename it.

ALT-V will toggle through the available video display sizes.
[READFILE]
                FILE DISPLAY HELP

To move about the file currently displayed, use any of
the following keys:

    PAGE DOWN       To move forward one screen.
    PAGE UP         To move backward one screen.
    DOWN ARROW      To scroll down one line.
    UP ARROW        To scroll up one line.
    RIGHT ARROW     To scroll the view right.
    LEFT ARROW      To scroll the view left.
    HOME            To jump to the beginning.
    END             To display the end.
    spacebar        Page forward - exit if at end.
    ESCAPE          Exit the current display.
    E               To view the file w/your editor*
[REPLYHDR]
                   EDIT MESSAGE HEADER HELP

Edit the message header so that the To, Subject, Conference, Privacy
and tagline are as you desire.  When all data is correct, press F10
to "accept" or "save" the information, press ESCAPE to cancel the
message.

For replies, the F2 key can be used to toggle the TO file between
the original message's sender and receiver.  The default is to
address the message to the original sender.  You can see the message
header you are replying to at the top of the screen (if you are
replying).
[READ]
                      MESSAGE READING HELP

 The following keys are available while reading messages:

 ENTER/+ Move forward one message          P - Print to "prn" device
   G/-   Move backward one message         O - Shell a command line
   S     Print the message to a file       Z - Skip to next "unread"
   F     Find text within the conference   Q - Thread Selection menu
   I     Select individual messages by header information
   K     Kill the current reply (reply conference ONLY)
   R     Reply to the current message/modify a reply
   N/L   Find NEXT/PREVIOUS match for current text search
   X     Exit MR/2 fast - without cleanup, on confirmation
   H/B   Move forward/backward inside thread
   T     Steal the current message's tagline

   TAB/BACKSPACE      Jump to NEXT/PREVIOUS thread
   PAGE UP/DOWN       To move forward/backward one screen
   UP/DOWN ARROW      To scroll up/down one line
   RIGHT/LEFT ARROW   To scroll the view right/left
   HOME/END           To jump to the beginning/end of the message
   spacebar           Page forward - next message if at end
   ESCAPE             Exit the current display
[CONFSEL]
          CONFERENCE SELECTION HELP

To select a conference for reading, simply
use the cursor keys to highlight the desired
conference and then press ENTER.  Optionally,
you may "click" on the desired conference with
the left mouse button.

Paging through a large conference list is
possible by pressing PAGE UP and PAGE DOWN.
Also, the arrow keys will cause the display to
scroll up/down as necessary.

You may search for text in ALL conferences from
here.  Press ALT-F for the search form.

Pressing ESCAPE will exit conference selection
and return you to the Packet's main menu.

The number of messages in each conference is
displayed next to the conference name.
[FILLSRCH]
             SEARCH CRITERIA ENTRY

To search for a text string, simply enter the text
to match and press ENTER.

The search is case insensitive; it will find the
specified text ignoring any any differences in the
case of individual characters.

When a message is found that contains the specified
text, it will be displayed with the first matching
line displayed on the second line of the display.
[INDSEL]
          MESSAGE SELECTION HELP

To select a message for reading, simply use
the cursor keys to highlight the desired
message and then press ENTER.  Optionally,
you may "click" on the desired message with
the left mouse button.

Paging through a large message list is
possible by pressing PAGE UP and PAGE DOWN.
Also, the arrow keys will cause the display to
scroll up/down as necessary.

Pressing ESCAPE will exit message selection
and return you to the previously displayed
message.
[FASTEXIT]
           FAST EXIT HELP

If you wish to exit MR/2 at this time.
press ENTER.  This will bypass all
MR/2's cleanup functions and return to
the current packet at a later time.

If you do not wish to exit at this
time, press ESCAPE.  You will be
returned to view the more messages.

If you exit now, next time you invoke
MR/2, you will be informed of the
existence of a "previous" package and
asked if you would like to continue
here.  Answer YES (use the ENTER key)
to read the packet, NO (use ESCAPE) to
exit.
[PREVREP]
       PREVIOUS REPLIES EXIST HELP

MR/2 has found that the packet directory
contains replies from a previously session.
These could be legitimate replies from an
unfinished packet, or they may have already
been uploaded.

If you would like to keep the existing
replies - simply press ENTER.

If you would like to remove all previous
replies  -  press ESCAPE and MR/2 will
proceed with a fresh, empty reply file.
[PREVPACK]
      PREVIOUS PACKET EXISTS HELP

MR/2 has found that the work directory
contains remnants of a previously opened
packet.  This could have resulted from
a previous "Fast Exit", or even a system
error.

If you would like to investigate the
existing packet files - simply press
ENTER.

If you would like to remove the previous
packet's messages  -  press ESCAPE and
MR/2  will allow you to select a new
packet for reading.
[BULSEL]
           BULLETIN SELECTION HELP

To select a bulletin for reading, simply use
the cursor keys to highlight the desired
bulletin and then press ENTER.  Optionally,
you may "click" on the desired bulletin with
the left mouse button.

Paging through a large bulletin list is
possible by pressing PAGE UP and PAGE DOWN.
Also, the arrow keys will cause the display to
scroll up/down as necessary.

Pressing ESCAPE will exit bulletin selection
and return you to the packet's main menu.
[KILLREP]
          KILL REPLY

Press ENTER to mark this reply
as KILLED.  This will prevent
it from being sent to the
target mail door.

Press ESCAPE if you wish to
KEEP this reply active.
[ABORTREP]
        ABORT MESSAGE

Press ENTER to cancel the entry
of this message.  Your message
information will be lost.

Press ESCAPE to continue with
the processing of the message.
[RENPACK]
        RENAME PACKET

Enter a new name for the chosen
packet and press ENTER.

Press ESCAPE if you really don't
wish to rename this packet.
[DELPACK]
           DELETE PACKET

Press ENTER to delete the selected
packet.  To cancel the delete request,
simply press ESCAPE.
[PATHEDIT]
              PACKET PATH EDIT

Modify the packet path as desired and press
ENTER to list the packets found in the new path.

Press CANCEL to leave the packet path unchanged
[TAGEDIT]
              TAG STEALING AND EDITING

MR/2 has selected a line from the current message as the
most likely "tagline".  This line is displayed for your
editing before being appended to the tagline file.  Make
any necessary or desired changes and press ENTER to save
the new tag.  Press CANCEL to abort the stealing process.

If the tagline MR/2 has chosen is not the line desired,
you may use the UP/DOWN arrow keys to scroll through
the lines of the message.  Once the desired line is
displayed, make any desired changes and press ENTER to
save it.
[JUMPLAST]
            JUMPING TO YOUR LAST READ MESSAGE

This option takes advantage of the "bookmark" feature of
MR/2.  Your last position in the packet is remembered and
saved as extended attributes when you exit.  You now have
the option of jumping directly to this position.

If you wish not to be "jumped" to this message, press
ESCAPE and the normal main menu will be displayed.

If you do wish for MR/2 to place you at your last known
position, press ENTER.
[ADD]

           Not yet implemented

[DELETE]

           Not yet implemented

[FILLSRCH]
                  SEARCH CRITERIA ENTRY

Fill in a text string to use in the search.  This string may
contain spaces and the search is case-insensitive (e.g., "CAT"
find "cat").

To search for more than one string at a time, separate the
search strings with a backslash "\".

Soundex searching is requested by proceeding a search string
with an apersand "&".  The soundexing algorithm is very "loose",
so soundexing should be used only on longer words (not OS/2, but
Windows will work nicely).

Example:   CTOS\&windows\OS/2

will find all messages containing either the text "CTOS", "OS/2"
or anything that "sounds like" windows (i.e., windoze will match).
[BBSSEL]
          NO PACKET - BBS NAME SELECTION

Select from the displayed BBS names to enter a message
when no packet currently exists.  The BBS's listed are
all those from which MR/2 has been used to read QWK
packets.  When a packet is opened, MR/2 copies the
control data for the source BBS to a BBS.cfg file in
the MR/2 home directory.
[PICKTAG]
                  TAG LINE SELECTION

All currently available taglines are displayed for your
selection.  Use the "page" keys to move through the
file a screen at a time, or the arrow keys to scroll.

Highlight the desired tagline and press ENTER to select
it.  To cancel the tagline selection, simply press ESCAPE.
[FILLSAVE]
                   SAVE FILE NAME

Enter the name of the file to append the currently
displayed message to.  For a list of existing save files,
press F2.
[SAVESEL]
Select the name of the file to append the current message
to.  You may used the "page" keys to page through this list,
or the cursor keys to scroll through it.  Press ENTER to
select any name.

Press CANCEL to exit this screen without selecting a name.
[END]
