ÿWPC0 ûÿ2ÿÿBVP¦Courier 10cpiÿÿ–2xxx ¹+Xx Œ ‘@ɇÏX@ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿþÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿCourier 10 Pitchs IIHPLASEII.PRSÛx Œ @ɇÏ,ðt0’„X@#|xûÿ2üÿÿWCÿÿšÿÿI· Z¢Standard PrinterUndefined packet). STANDARD.PRSÛx Œ @ɇÏÌb_#|xStandard PrinterUndefined packet). STANDARD.PRSÛx Œ @ɇÏ3`@ûÿ2.Tech Bulletin:IBM PS/2 Enhanced 80386 Memory Expansion option Áà˜ ìÁNOVELL TECHNICAL BULLETIN ƒ TITLE:Â` ÂNovell NetWare v2.2 and the IBM PS/2 Enhanced 80386 Memory Expansion option 2MB and 4 MB kit Æ(#Æ DOCUMENT ID#:Â` ÂTB.P.289 Æ(#Æ DATE:Â` Â05/09/91 Æ(#Æ PRODUCT:Â` ÂNetWare 286 Æ(#Æ PRODUCT VERSION:Â` Â2.2 Æ(#Æ SUPERSEDES:Â` ÂNA Æ(#Æ Ôh)0*0*0*°°ÔŒ SYMPTOM:Â` ÂNA Æ(#Æ ÂXÂISSUE/PROBLEM Æ(#Æ ÂXÂWhen using the IBM PS/2 Enhanced 80386 Memory Expansion Option in conjunction with Netware v2.2, two issues may arise: Æ(#Æ ÂXÂ1.ÂX` ` ÂThe file server will be unable to boot from the hard drive if NetWare v2.2 is installed before the IBM Memory Expansion Option is installed in the system. The IBM Memory Expansion Option software will overwrite the NetWare cold boot loader stored at track 0 on a file server. This issue also occurred in v2.15c and was resolved by using IBMMEM.ZIP patch on NetWire(NOVA LIB 8). Æ(#` Æ ÂXÂ2.ÂX` ` ÂThe file server will not recognize the IBM Expansion Option if the IBM Memory Expansion Option is installed before NetWare v2.2 is installed in the system. Netware v2.2 will write over the IBM Memory Expansion Option software necessary to recognize the adapter. You may receive "Error Loading User Device" then boot to BASIC. Æ(#` Æ ÂXÂProducts Affected: Æ(#Æ ÂXÂNovell NetWare 286 v2.2 Æ(#Æ ÂXÂIBM PS/2 Enhanced 80386 Memory Expansion option 2MB and 4 MB kit Æ(#Æ ÂXÂoÂX` ` Â2 MB Kit - IBM p/n 34F3077 feature code 3077 Æ(#` Æ ÂXÂoÂX` ` Â4 MB Kit - IBM p/n 34F3011 feature code 3011 Æ(#` Æ ÂXÂoÂX` ` ÂNOTE Both the 2 and 4 Megabyte versions of the memory card can also be identified by the same card sub assembly part number(located on the back of the card near the metal bracket). This IBM card sub assembly part number is as follows: Æ(#` Æ ÂXÂp/n 49F5507 -- on adapters manufactured before July 1, 1990 p/n 87F9819 -- on adapters manufactured on or after July 1, 1990 Æ(#Æ ÂXÂSOLUTION:°¸ ¸ ÂNA Æ(#¸ Æ ÂXÂIt is necessary to boot NetWare from diskette when using the IBM Memory Expansion Option on a file server. This will solve either potential issue. To use the full functionality of the memory adapter, you must complete the following procedures: Æ(#Æ ÂXÂ1)ÂX` ` ÂInstall the IBM Memory Expansion Option again. PleaseÔh)0*0*0*°°Ô refer to the installation instructions provided with the adapter. Æ(#` Æ ÂXÂ2)ÂX` ` ÂCopy the memory adapter's board driver, DOSMEMDD.SYS, from your Option diskette to a DOS bootable floppy diskette. Copy or create a CONFIG.SYS file on this DOS bootable diskette and include on line 1 the statement "DEVICE = DOSMEMDD.SYS". Please refer to the installation instructions provided with the adapter. Æ(#` Æ ÂXÂ3)ÂX` ` ÂIf you are using the Enhanced 80386 Memory as DOS 4.0 expanded memory, please refer to section 2 of your installation instructions provided with your adapter. Æ(#` Æ ÂXÂ4)ÂX` ` ÂPlace the file server's operating system on the same diskette. Please refer to "Using the Network" (Novell NetWare) manual pages 6 and 7 for full instructions on booting the file server from floppy diskette. Æ(#` Æ ÂXÂNovell is currently working on a patch to enable the cold boot loader information on track 0 to work with the IBM Memory Expansion Option in NetWare v2.2. This patch should be available by June 30 1991 on NetWire NOVA LIB 16 or 8 named IBM22M.ZIP. Æ(#Æ