I  ▄▄▄ ▄▄ ▄▄▄ ▄▄  ▄  ▄  ▄  ▄  ▄     ▄▄ ▄▄  ▄▄▄ ▄▄▄  ▄  ▄▄▄    ▄▄▄   ▄▄▄   ▌ ▐ █  █ ▐ █  █ █ █▄ █ █ █ █     █  █ █  █   █  █ █ █ ▐      █     █   █▀▀ █▀ ██▀ ▀█ █ █ █▐▌█ █▀█ █     █▀ █ █  █   █  █ █ ██▀    ▀▀█   ▀▀█   █   █▄ █ █ ▄█ ▀▄▀ █ ▀█ █ █ █▄    █▄ █▄▀ ▄█▄  █  ▀▄▀ █ █    ▄▄█ ▄ ▄▄█   ═════════════════════════════════════════════════════════════════════      This is the on-line context sensitive help facility within the editor. To obtain help at any point you need only to press the F1 key which is a standard function within the editor.      Help will only be unavailable under two circumstances, if the editor cannot find the file containing the help information or, if you are using a screen mode such as 40x25 and there is insufficient   space on the screen to display the help page. In either of these cases a suitable message will be displayed explaining the appropriate reason.       Many help messages occupy more than 1 page, in this instance you  will notice that   characters will appear at the top right and  bottom right corners of the help pages. To move between these help screens you can use the up & down cursor keys. To exit help press the ESCape key.                                          Copyright (C) D.Garratt 1991.■╡Help (1 of 7)╞          H  Whilst in normal edit mode you can access a full pull down command   menu by pressing the left and right shift keys simultaneously.   Alternativly you can access the functions directly as shown below :-                   Function Key Command List                 ─────────────────────────      Up Arrow     -  Move Up One Line      Down Arrow   -  Move Cursor Down One Line      Left Arrow   -  Move Cursor Left One Character      Right Arrow  -  Move Cursor Right One Character      CTRL + Right -  Page Right       CTRL + Left  -  Page Left      PgUp         -  Page Up      PgDn         -  Page Down      CTRL + PgUp  -  Top Line of Current Page      CTRL + PgDn  -  Bottom Line of Current Page                                                     <More>.....    ■╡Help (2 of 7)╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         H      TAB          -  Move Cursor Right by 9 Characters      Shift + TAB  -  Move Cursor Left by 9 Characters      CTRL + Home  -  Move to Top of File      CTRL + End   -  Move to End of File      Home         -  Move Cursor to Begining of Line      End          -  Move Cursor to End of Line      Ins          -  Toggle between Insert & Replace Mode            Del          -  Delete Character under Cursor      Esc          -  Quit      ALT + 1      -  Mark Start of Block      ALT + 2      -  Mark End of Block (Write Block to Disk)                 ALT + 3      -  Insert Block (Read Block from Disk)      ALT + 4      -  Record TAB Sequence Positions      ALT + 5      -  Define Find Text      ALT + 6      -  Define Replace Text      ALT + 7      -  Run / Define External Programs      ALT + 8      -  Define Column Block (Write Marked Area to Disk)                                                     <More>.....    ■╡Help (3 of 7)╞                                                                                                                                                                                                                                                                                                                                              H      ALT + 9      -  Insert Column Block (Read Marked Area from Disk)        ALT + B      -  Print Marked Block (ALT + 1 / ALT + 2)      ALT + C      -  Change Directory      ALT + D      -  Delete Current Line      ALT + E      -  Delete from Cursor Position to End of Line      ALT + F      -  Search for Find Text (See ALT + 5)      ALT + G      -  GOTO Specified Line Number      ALT + H      -  Display File Size Information (Sessions)      ALT + I      -  Insert Line (Move Current Line Down)      ALT + J      -  Join Current Line with Next Line      ALT + L      -  Change Logged Drive      ALT + M      -  Select Next Video Mode       ALT + N      -  Print Column Block (ALT + 8)      ALT + O      -  Shell to DOS, type 'EXIT' to return to editor          ALT + P      -  Select User Defined Printer Escape Code     CTRL + R      -  Replace String (See ALT + 5 / ALT + 6)      ALT + S      -  Split Line at Cursor Position                                                     <More>.....    ■╡Help (4 of 7)╞                                                                                                                                                                                                                                                                %   You are now in Draw Mode. With the editor in this mode you can  easily draw lines,boxes or indeed almost any shape you like using the standard IBM character set.   The editor will automatically select the appropriate character depending on the context and  direction in which the cursor is traveling.   Cross-Hairs can be toggled On/Off by pressing ALT + =. You can change the character set by pressing ALT +  F2 whilst in normal edit mode.   Press the ESCAPE key to cancel Draw Mode and return to normal editing.                    ■╡Draw Mode╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      1                IBM Character Set ╔═╦═╗ ┌─┬─┐ ╓─╥─╖ ╒═╤═╕ ░░░░░ ▒▒▒▒▒ ▓▓▓▓▓ █████ ║ ║ ║ │ │ │ ║ ║ ║ │ │ │ ░ ░ ░ ▒ ▒ ▒ ▓ ▓ ▓ █ █ █  ╠═╬═╣ ├─┼─┤ ╟─╫─╢ ╞═╪═╡ ░░░░░ ▒▒▒▒▒ ▓▓▓▓▓ █████ ║ ║ ║ │ │ │ ║ ║ ║ │ │ │ ░ ░ ░ ▒ ▒ ▒ ▓ ▓ ▓ █ █ █ ╚═╩═╝ └─┴─┘ ╙─╨─╜ ╘═╧═╛ ░░░░░ ▒▒▒▒▒ ▓▓▓▓▓ █████   1     2     3     4     5     6     7     8   There are sufficient number of characters available to support 8 different types of boxes   You should note that Draw mode will not  function properly if you try a combine box  characters of incompatible types.■╡Draw Characters╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     !   To create a macro you should first position the cursor at the point on the text display where you wish the recording  to start. Only then should you select this Macro Create option.   There are two modes available whilst recording a macro, cursor movement only, or cursor movement & character read. In the first instance, which is the default mode, the macro will only record cursor movements. In this mode valid movement keys  are Up,Down,Left,Right,Tab & BackTab. It is possible to create a macro which only  contains cursor movement codes, however, this mode is normaly■╡Creating a Macro (1 of 3)╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             	  used to move between two areas of a diagram without recording characters which are not wanted or have already been recorded.  The other mode Cursor Movement & Character Read works in a simular way to the  previous mode except that it reads the characters that the cursor moves over and includes them in the macro. It is  possible therefore to create macro's that will start at any point of a diagram and on  completion place the cursor at any offset from the original starting position.    To toggle between modes you■╡Creating a Macro (2 of 3)╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        should press the SPACE BAR. When you have completed the macro definition you should press ENTER and it will be  saved to the disk file you specified at the start. You may call your macro's by any name but it is recommended that they use the extension MAC. If at any time you wish to cancel the macro create function you should press the ESCAPE key and you will be returned to normal edit mode.  Cross-Hairs can be toggled on/off by pressing ALT + =. Valid macro commands include ALT+F5,ALT+F6,ALT+V & CTRL+V■╡Creating a Macro (3 of 3)╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     The editor allows the user to perform all normal directory operations. For all directory functions you can either enter a full path specification or just the last part depending on the context and current directory. For example, if you wish to remove the subdirectory     \MAIN\SUB\TEMP             ^^^^ you can either provide the full path as shown above or just TEMP, but for the later to work you must have \MAIN\SUB as the current directory. Press ESC to cancel.■╡Directory Functions╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              
   This window will only be displayed if you attempt to quit from the editor whilst a background print is in progress. You are now given the opportunity to confirm your intention to quit and abandon the print, or cancel the quit function and  continue printing.■╡Printing╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 
!    This menu allows you to setup and control way that the editor sends data to the printer. The editor will output the data to the selected parallel port when there is no other requests pending. The first option allows you to determine the priority which is allocated to the background printing task. 1 is  the highest priority and  15 the lowest. If you find that the printing process is causing your keystrokes to be delayed to an unacceptable degree then you should select a lower print  priority.■╡Print Configuration (1 of 3)╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      !   Apart from the print priority there are a number of other controls available to you via this control panel.    You may suspend the output temporarily by selecting the Pause Print option (If you need to change the printer ribbon or change the paper). When you are ready to continue printing you should select the Resume Print option. If you decide that you wish to permanently stop the current file from printing then you need to select the Cancel Print function.   The next option will take you■╡Print Configuration (2 of 3)╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          
# to another menu where you can define up to ten user defineable control codes. These control codes can then be sent to the printer by using the ALT + P key combination.   The next option lets you specify how many copies you require.    The Spooler Control Panel gives you the ability to submit and  delete files from the DOS PRINT queue.   Lastly you have the facility to select which printer port you wish to use. This can be any one of four parallel printer ports, especially useful on networks where output is redirected to remote printers.■╡Print Configuration (3 of 3)╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          .    This function is used to manually enter a filename. There is an alternate method of selecting a file, by using ALT in combination with the same function key as you have just used to obtain the manual input  line.  e.g. Load a file -     F3 Manual Input.                    ALT F3 Sorted Directory.      Print a file -    F10 Manual Input.                    ALT F10 Sorted Directory. If you have selected this function by mistake then you can cancel it by pressing the ESCAPE key.■╡Filename Selection╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  -    Whilst in a manual input field you shouldtake note of the following standard keyfunctions :-  ESC - Cancel any changes to contents of        field.  INS - Toggle between insert and overtype        modes.  DEL - Delete character under cursor.  END - Delete all characters on line from        cursor position to end of current        line.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        "  The file you have been editinghas been modified and you have not saved all the changes.  You now have three options available to you. You can quit without saving any of thechanges you have made by selectingAbandon Changes option, or if youwould like to save the changesyou have made then you need toselect the Save Changes option.   Alternatively you may have chosen this option by mistake in which case you can resume editingby selecting the last option,Resume.■╡Quit Editor╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             !	   This is the main configurationmenu. You should select the sub-menu's from this menu to createthe start up configuration thatyou want the editor to use whenyou run the program from DOS.   Don't forget to save yourmodifications when you havefinished.■╡Configuration╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       >   This menu will allow you to customise the colours used bythe editor. To change the colour of an item you need only toselect it from the menu and press enter. You will then be ableto select the colour you require from the following menu. Theoptions that appear on the menu are given fuller explanationsbelow :- FILE TEXT      The colour of the text you are editing. POP-UP HELP      The colour used for all the context sensitive pop-up      help boxes. SELECTION WINDOWS      All Menus like the current one and file selectors that      you use to load a file from a sorted list.■╡Colours (1 of 4)╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   ; SYSTEM MESSAGES (TOP LINE)      Status line at top of screen like the one which you      see when a file is loading or selecting a file. MODE INDICATOR (BOTTOM LINE)      The line used when Drawing or creating a Macro to      indicate the current function mode. WINDOW SELECTION BAR      The reverse video higlighting used to denote which       menu item is selected. FILENAME      Name of filename on as displayed at bottom of screen. INFORMATION      Information messages that appear on screen.      e.g. The number of edit session etc.■╡Colours (2 of 4)╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           ? SYSTEM PROMPT      System Prompt messages that appear when printing has      finished or an unexpected error has occured.      e.g. 'Printing finished'  'Disk Full'.' STATUS LINE TEXT      This is the titles attached to variable information      which is printed at the bottom of the screen.      e.g. 'X=' 'Y=' 'INSERT' 'REPLACE' SHOW WINDOW NUMBERS      The colour used in the ASCII chart show window to display      the ASCII value to the left of each character.      e.g. '000' - '255' SHOW WINDOW CHARACTERS      The colour used to display the actual ASCII characters      that are displayed in the show window.■╡Colours (3 of 4)╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             B SHOW WINDOW SELECTOR      The attribute used to indicate which item in a show          window that will be selected when you press enter. INPUT FIELDS      This colour is used when you are entering information on       the status line for file names and find text etc. CROSS HAIRS      This determines how the horizontal and vertical lines      are displayed. BLOCK HIGHLIGHTING      This colour is used when you define a area of text using the      ALT + 8 key combination. ■╡Colours (4 of 4)╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           )  All character display modes listed hereshould be available to users of ParadiseVGA display adaptors. If you do not havesuch an adaptor then your hardware may berestricted to the first two modes.  Support for the higher resolution modescannot be guaranteed on other adapterswhich do not offer the same extended VGAfacilities.      40 Cols x 25 Rows CGA/EGA      80 Cols x 25 Rows CGA/EGA      80 Cols x 43 Rows EGA/VGA      80 Cols x 50 Rows VGA     132 Cols x 25 Rows Extended VGA     132 Cols x 43 Rows Extended VGA■╡Display Mode╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       Enter the extension that is reserved for macro files.This extension is used as a standard filter in the samemanner as the DOS DIR funtionworks.  Extensions can be anythingyou like but you must rememberto specify this extension whenyou create the macro files with F7. If you want to have macro files with multiple types of extension then you can use the normal '*' or '???' characters to ensure that they appear in the sorteddirectory listing produced by ALT+F7 & ALT+F8.■╡Macro File Extension╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Enter the extension that is used to select files to edit.This extension is used as a standard filter in the samemanner as the DOS DIR funtionworks.  Extensions can be anythingyou like but you must rememberthat only those files thatsatisfy the filter will appearwhen you load files with     ALT + F3 and save files withALT + F4. You may include thenormal '*' and '???' ASCIIcharacters as wild cards ifyou want to include severalor all file extensions.■╡Edit File Extension╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                #  This facility lets you specifya line number to edit and providingthe line number you enter existsthe editor will automatically jumpto that line. If you specify a linenumber beyond the end of the filethen the cursor will be positionedon the last character in the file.If you do not want to use thisfunction you can press ESCape toreturn to edit mode.■╡GOTO╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          )
  This window will show you the filenamesthat you are currently using in all fiveedit sessions. By using the cursor keysyou can highlight the session that you want to select. Press enter when you havemade your selection or press ESCape ifyou want to cancel this function.  This window will not be available in 40column mode as there is insufficient space to display the filenames.■╡Session Names╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     +  This mode allows you to determine up  to 50 predetermined tab positions. Usethe left and right cursor keys to whereyou wish to define a tab stop to be placedand then press the space bar.  When you have finished defining the tabpositions you should press enter which willreturn you to normal editing mode. Thesetab stops are only active when you are intab sequence mode which is toggled on andoff with ALT + Y. If you want to save setting for you next edit session youshould save them from the configurationmenu - ALT + F1.■╡User Defined Tabs╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             %D      ALT + T      -  Toggle AUTO TAB Mode On/Off      ALT + V      -  Replicate Characters on Line Above     CTRL + V      -  Replicate Characters on Line Below       ALT + W      -  Delete word under cursor      ALT + X      -  Toggle ENTER Mode (Split/Add Line On/Off)      ALT + Y      -  Toggle TAB Sequence Mode On/Off      ALT + Z      -  Toggle ALT+P Mode (Screen/Printer)      ALT + =      -  Display Cross-Hairs      F1           -  Display Context Sensitive HELP                ALT + F1     -  Configuration Menu      F2           -  Draw Mode                ALT - F2     -  Select Draw Mode Character Set      F3           -  Load a File (Enter Filename)                ALT + F3     -  Load a File (Select Filename)      SHIFT + F3   -  Load a File (File Finder)      F4           -  Save File (Use current Filename)                   ALT + F4     -  Save File (Select File to Overwrite)                                                     <More>.....    ■╡Help (5 of 7)╞                                                                                                                                                                                                                                                                                                 *  You can now enter a string which you  will later locate by using the ALT + F keycombination.  When you specify the text that you want to search for you need to delimit it usingany pair of characters you wish as long asthey do not occur in the string you aresearching for. By using a delimiter youcan indicate that you want to locate a string with a specified number of spaces.  By default the string you define willbe used to find an exact match (i.e. CaseSensitive), but you can overide this byadding a trailing * character after thelast delimiter.    /String 1/   <-  Case Sensitive    )String 2)*  <-  No Case Checking■╡Find String Definition╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                

+  You can now enter the string which will  be used to replace the find string asdefined with the ALT + 5 key combination.  When you specify the text that you want to use you need to delimit it. You can useany pair of characters you wish as long asthey do not occur in the string itself.■╡Replace String Definition╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          (
  You now have the following options :-  (R)eplace the current string and      continue looking for next occurence     of the find string.  (I)gnore the current string and look     for the next occurence of the find     string.  (A)ll occurences of the find string     are to be replaced without asking     for confirmation.  (C)ancel the replace function and     return to normal edit mode.■╡Replace Mode╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        -   This menu allows you to select/modifyup to 5 external commands which can be anyprogram or batch file. Use the cursor keysto select the desired command and pressenter. You will then be given the opportunityto change the command before you execute it.   To cancel this function you should press the ESCape key.■╡External Commands╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        :
  Enter the name of a program or bacth file which you wishto run. When you press enter the editor will load anothercopy of the command interpreter, COMMAND.COM and thensubmit your command for processing. Providing the filenameis valid and there is sufficient memory left the externalprocedure will be run automatically. If you include %1 inthe command line the editor will always substitute thecurrent filename in the run command. If you wish to editthe command line without actually executing it the youshould press F10 when you have done instead of ENTER.■╡External Commands╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                $8   The editor allows you via the ALT + P key combinationto send a string of control codes to the printer. Thesecodes can be any valid printer escape sequence. You can define 15 strings to obtain such effects as Expanded,Condensed, Double Strike or NLQ Mode or indeed anythingyour printer supports. To define these codes you shouldselect the code you require from the window by pressingENTER. You will then be given the opportunity to changethe description of this printer escape sequence. Whenyou have done this you should press ENTER again at whichpoint you will be prompted to enter the escape sequence. **N.B.** The escape sequence you enter must be delimited by a pair of characters which do not appear inthe string itself.        e.g. /My Escape Sequence/■╡Printer Control Code Definition (1 of 2)╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       #;   Certain characters which are commonly used in printerescape sequences would normally present you with somedifficulties when you try to enter them on the input line. If for example you wish to start your string withcharacter 27 (ESCAPE) you would normally find it impossible because the editor reserves the escape keyto mean 'Cancel all changes on the input line & Exit'.To overcome this handicap and make the selection ofcontrol codes easier it is possible to use the F5 ASCIIShow Window and the F6 Enter ASCII Code keys. These keysare used in the same manner as in normal edit mode. Whenyou have finished defining your code sequence you should   press ENTER which will return you to the selectionWindow. Don't forget that in order to make these codespermanent for future use you must use the Save option onthe Configuration Menu.■╡Printer Control Code Definition (2 of 2)╞                                                                                                                                                                                                                                                                                                                                                                                                               *F      SHIFT + F4   -  Save File (Overwrite via File Finder)      F5           -  Display ASCII Chart       ALT + F5     -  Pick Up ASCII Character      F6           -  Enter Selected ASCII Character       F7           -  Create Macro (Enter Filename)      ALT + F7     -  Create Macro (Select File to Overwrite)      SHIFT + F7   -  Create Macro (Overwrite via File Finder)      CTRL + F7    -  Draw Macro      F8           -  Select Macro (Enter Filename)      ALT + F8     -  Select Macro (Sorted Directory)              SHIFT + F8   -  Select Macro (File Finder)      F9           -  Select Next Edit Session, 5 Maximum      ALT + F9     -  Select Edit Session (Window)      SHIFT + F9   -  Select Previous Edit Session      F10          -  Print a File (Enter Filename)      ALT + F10    -  Print a File (Select Filename)                        SHIFT + F10  -  Print a File (File Finder)                                                     <More>.....    ■╡Help (6 of 7)╞                                                                                                                                                                                                                                                                                                         ?    The File Finder function within the editor is an extremelyuseful facility which allows you to locate and select a fileanywhere on your hard disk. To use this function you shouldtype in the filename you wish to locate on the input line atthe bottom of the screen and press enter. The program will thenscan though all the subdirectories on the default drive andcompile a list of all the files that match the name you havespecified. The program will accept the wildcard * and ?characters in the filename so it is possible to scan for fileswith a certain extension or partial filenames. If you were tospecify a filename of *.* the program would list all the fileson the current disk up to a maximum of 950 files. Once the list has been compiled it will then be displayed in a browsewindow. This window displays the files in the same sequence asthey were originally encountered on the disk. To select one of these files you should highlight the file with the cursor keysand press enter. This function is not available in 40 col mode.■╡Finder╞                                                                                                                                                                                                                                         

0   This function will determine how many copies will be printed when you select a file to print.You must select a number between 1 and 9999. Tocancel this function you must press ESCape orF10.■╡Number of Printed Copies╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           K   You are now in block mode. You should use this mode to define a block oftext. Once you have defined a block of text you can print it, delete it,copy it or fill it. To perform any of these functions you need to mark therequired area of text by using the cursor keys. By default you have alreadyindicated to top left hand corner of the block as soon as you pressed the ALT + 8 key combination. You must now use the right and down cursor keys tomove to the bottom right hand corner of the block. Once you have done thisyou have several options :- ENTER - This will copy the block to disk for later insertion via  ALT + 9          or printing via ALT + N. Del   - This will delete the entire block and copy it to disk. You         will then be able to insert or print it as described above. F5    - Copies block to disk and then displays ASCII chart for you to          select a character to fill the block. F6    - As above only uses previously selected F5 ASCII character. SPACE - Similar to F5 except you manually type the fill character. The current insert mode determines how the block is inserted with ALT + 9■╡Block Functions╞                                                                                                                                            G   You are now in the pull-down menu system. You can use these menus toaccess all of the editors main features. You should use the left andright cursor keys to switch between the different menus and then use the up and down cursor keys to select the required option. When youwish to leave the menu system and return to normal editing you shouldpress the escape key. You will notice that some of the menus containa number of options which are essentially the same with the exceptionof a phrase in brackets. The following explains the difference betweenthese commands :-          (manual) - The filenmame is typed in on the status line.          (select) - You choose the filename from a sorted list of                     files found in the current default directory.          (search) - You provide a filename and the editor scans the                     entire disk for matching files. You then select                     the file you require from a window.■╡Pull-Down Menus╞                                                                                                                                                                                                                                                                                                          %G      CTRL + F10   -  Print Control Menu          ─────User Defined Commands (See ALT + 7)──────                     CTRL + F1    -  User Defined External Command 1      CTRL + F2    -  User Defined External Command 2      CTRL + F3    -  User Defined External Command 3      CTRL + F4    -  User Defined External Command 4                 CTRL + F5    -  User Defined External Command 5■╡Help (7 of 7)╞                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             