340
1, "                            SEND PRINTER CODES HELP"
1, " "     
1, "  This program simply sends printer control codes to a printer. "
1, "  To use it simply type the codes (in decimal) wit a space between each:"
1, " "
1, "                                 c1 c2 c3 ... c9"
1, " "
1, "  As many codes can be sent as needed - up to the DOS command line limit."
1, "  If you need to send more code than can fit on one DOS command line just"
1, "  call this section again and send more codes."
1, " "
1, "     Epson Codes:  27 52 - sets,     27 53 - clears     italics"
1, "                   "
1, "                   15 - set compressed,  18 - clear compressed"
1, "                   14 - set Large print  20 - clear Large print"
1, "                   "
1, "                   27 45(-) - set/clear underline"
1, "                   "
1, "                   27 69(E) - set    27 70(F) - clear  emphasized"
1, "                   27 71(G) - set    27 72(H) - clear  Double - strike"
1, "                   "
2, "                           PRINT A TEXT FILE HELP"
2, " "
2, " This program will print any ASCII text file.  A date, time, & page header"
2, " are also printed on each page, unless specifically turned off."
2, " "
2, " To print an address and return address on an envelope see the /a and /r"
2, " switches."
2, " "
2, " Switches: /af - Prints an Address on an envelope, f - form feed (optional)"
2, "           /b - Begin printing on a page other than page 1."
2, "          /c# - # of lines to print per page."
2, "         /cnt - COUNT the pages and #lines on last page, NO printing!"
2, "       /cpy## - Print ## copies of this file."
2, "           /h - High bit anded out & 0x7F"
2, "           /l - Low codes replaced with SPACE - char(32). (V 5.0)"
2, "      /lr,#,# - up to 20 #'s allowed: print to #, skip to # - pairs."
2, "          /m# - More 132-chars per line, or designate the number (#)."
2, "           /n - Number each line."
2, "         /nff - No last FormFeed sent."
2, "         /nss - No starting spaces."
2, "           /o - Turns the header printing Off. No header printed."
2, "           /p - Numbers the pages on the bottom of the page."
2, "           /r - Prints a Return address on an envelope"
2, " (more  = spacebar)                                        (more  = spacebar)"
2, "                           PRINT A TEXT FILE HELP"
2, " continued..."
2, " "
2, " More switches: "
2, " "
2, "         /scn - Place the title lines on the screen to help positioning."
2, "           /t - Prints tabs as is, not replaced by 3 spaces each."
2, "       /tls## - Keep the ## lines as title lines & print on each page."
2, "           /w - wait - pause after each page, for a key press."
3, "                            ADDRESS LABEL PRINTER"
3, " "
3, "        FORM:  filename.ext [c1 c2 c3] [switches]"
3, "     "
3, "    filename.ext:     the name of the file to print"
3, "    c1 c2 c3 etc:     Printer codes to send to printer"
3, "    switches:         Any or all wanted different from defaults."
3, "     "
3, "                                                             Defaults"
3, "   switches:   /b## - Label number to Begin printing with.       1"
3, "               /c## - Number of Columns/Characters per line.    30"
3, "               /e## - Label number to End printing with.        Last"
3, "               /l#  - Number of lines between label beginnings.  6"
3, "               /W#1.#2.#3.#4.#5 - WIDE printout of labels"
3, " "
3, "    WIDE SWITCH:                                 (Default value)  (MAX)"
3, "        #1 = Number of lines per label                  4           10"
3, "        #2 = Number of lines between labels             2            X"
3, "        #3 = Number of labels across                    2           10"
3, "        #4 = Number of characters per address line     30           50"
3, "        #5 = Number of characters between labels        5            X"
3, "                X = max is 32,727, way beyond any normal useage."
3, " "
3, " (more  = spacebar)               (EXAMPLES)               (more  = spacebar)"
3, "                            ADDRESS LABEL PRINTER"
3, " continued..."
3, " "
3, "                 Example 1:  lst 29"
3, "                 Example 2:  lst 29 /b12 /e34 "
3, "                 Example 3:  lst 15 /b12 /e34 /w5.1.4.30.2
3, " "
3, "       Example 1: will print out the entire 'lst' file on labels on an"
3, "                  OKIDATA 82a printer in its small print mode."
3, " "
3, "       Example 2: same as #1 for labels 12 through 34 only."
3, " "
3, "       Example 3: will print out four labels across a page, of up to five"
3, "                  lines per label, one line between labels, 30 characters"
3, "                  per label line, two characters between labels.  Start"
3, "                  with label #12, end with label #34 and use compressed"
3, "                  print on an EPSON printer (15)."
4, "                            MOVE PRINTER PAPER HELP"
4, " "
4, " "
4, " "
4, "     This program will help Clear the Printer.   To use it type either:"
4, " "
4, "             FORM:  (RETURN)     or      ##     (RETURN)"
4, " "
4, "     where ## is any number from 1 to whatever you want."
4, " "
4, " "
4, "      (RETURN):  will send a Form Feed to the printer.  This moves the paper"
4, "                 to the ''top'' of the next page, or form."
4, " "
4, " "
4, "      ## (RETURN):  will send ## lines feeds to the printer.  This moves the"
4, "                    paper up by the ## of lines specified."
4, " "
5, "                               DISPLAY TEXT HELP"
5, " "
5, "  This program will display an ASCII text file.  Enter the text file name & "
5, "  any switches.""
5, " "
5, "      FORM:  drive:\path\file-name [[/c#.#]] [[/switches]]"
5, ""
5, " Switches:"
5, "          /a# -- Protect lines above this line number (lock titles.)"
5, "          /b#.#- Banner (#.# = colors, optional), if /a# used FIRST."
5, "          /c#.#- Color, fore.back-ground colors , or . allowed."
5, "      /f[text] - display file & auto FIND this "text"."
5, "          /l## - Protect columns to the left of the column."
5, "          /nlr - No Left/Right movement"
5, "          /r## - Only active if /l## used: The is the RIGHT column to"
5, "                 START at in the right-hand-left/right movement window."
5, ""
5, "     This program now allows lines up to 256 characters in length, lines"
5, "     longer than 256 characters are wrapped.  80 columns will be shown at"
5, "     one time.  Use of the Left/Right arrows moves the text right or"
5, "     left.  Pressing the SPACE-BAR will activate a second HELP line"
5, "     for left/right movement."
5, " "
5, "                 Search inputs are limited to 70 characters."
6, "                          SMALL EDITOR TYPEWRITER HELP"
6, " "
6, "      FORM:  drive:\path\file-name  [[switches]]"
6, " "
6, "                              STARTING  SWITCHES"
6, " "
6, "  /a    - Use 601 lines by 87 Characters for the AMS.HLP type files."
6, "          NOTE:  The AMS.HLP files are the full screen help files."
6, "  /as   - Auto Save the file AS named.  If Alt-S pressed no opertunuty is given"
6, "          to change the file name."
6, "  /c#.# - Colors for text screen foreground.background,    NOTE: This will"
6, "          ONLY work on IBM color standard type COLOR monitors & driver cards."
6, "  /l    - Use LONG LINES (102 lines by 480 characters), for AMS.LST files."
6, "          AMS.LST files are the Advanced Menu System  MENU files."
6, "  /s    - Short lines for SAM.HLP files,    NOTE:  The SAM.HLP files are"
6, "          the Small help window help files, 11 lines X 48 characters."
6, "  /t#   - Relpace TAB with spaces. Enter the # of spaces wanted for each tab."
6, "  /ty   - Start in the Typewriter mode.  Each line entered with the ÄÙ,"
6, "          ENTER or RETURN key, will be sent to the printer."
6, " "
6, "   F1 - More detailed help for the Editor (typewriter) program when running."
6, "   F2 - changes the bottom two lines of help between the two help lines."
6, "                                    (COLORS)"
6, " (MORE  = spacebar)                                        (MORE  = spacebar)"
6, "                        SMALL EDITOR TYPEWRITER HELP"
6, " continued..."
6, " "
6, " "
6, "      FORM:  drive:\path\file-name  [[switches]]"
6, " "
6, "  /c#.# - Colors for text screen foreground.background,    NOTE: This will"
6, "          ONLY work on IBM color standard type COLOR monitors & driver cards."
6, " "
6, " "
6, "                                 COLORS"
6, " "
6, "  COLORS:   0 Black             8 Black                  Foreground = 0 - 15"
6, "            1 Blue              9 Bright Blue            Background = 0 -  7"
6, "            2 Green            10 Bright Green"
6, "            3 Light Blue       11 Bright Light Blue"
6, "            4 Red              12 Bright Red"
6, "            5 Magenta          13 Bright Magenta"
6, "            6 Brown            14 Bright Yellow"
6, "            7 Normal White     15 Bright White"
6, ""
6, ""
6, "              For on-line help while in the editor, press the F1-key. "
7, "                CHANGE TEXT FILES LETTERS TO DESIGNATED CASE HELP"
7, ""
7, "   This program changes a files text from either upper case to lower case or a "
7, "   files lower case letters to upper case.  CASE will default to changing "
7, "   everything to lower case.  It will also COUNT the letters of a designated
7, "   case."
7, ""
7, "                     FORM:  drive:\path\file-name [switch]"
7, ""
7, ""
7, "   SWITCHES:  /l   -  Change all upper case letters in file to lower case."
7, "              /u   -  Change all lower case letters in file to UPPER case."
7, "              /c?  -  Count the number of ?-case letters. (?=U/L)."
7, ""
7, "   NOTE:   The default is change from upper case to lower case."
7, ""
7, ""
7, "   EXAMPLE:   test.fl /cu    - will count the upper case letters in 'TEST.FL'."
7, ""
8, ""
8, "                          HP LASER Jet III  font CODES"
8, ""
8, ""
8, " cram:   set it to 75 lines by 200 characters. use PPRINT /c75 /m200 /hp"
8, ""
8, " I028 - very small PC  120 chars"
8, ""
8, " I029 - small PC       90  chars"
8, " I030 - small bold PC"
8, " I031 - small italic PC"
8, ""
8, " I032 - Normal PC      80  chars"
8, " I033 - Normal Bold    80  chars"
8, " I034 - Normal Italic  80  chars"
8, ""
8, " wrap off:  Turns automatic line wrap off."
8, " wrap on:   Turns automatic line wrap on."
8, ""
8, ""
8, " port: &l0O"
8, " rport: &l2O"
8, " portrait: &l0O"
8, " reverse-portrait: &l2O"
8, " cr-lf: &k2G"
8, " wrap-off: &s1C"
8, " wrap-on: &s0C"
8, " (Roman-8)"
8, " i000: (8U(s0p10.00h12.0v0s0b3T"
8, " i001: (8U(s0p16.67h8.5v0s0b0T"
8, " i002: (8U(s0p12.00h10.0v0s0b3T"
8, " i003: (8U(s0p12.00h10.0v0s3b3T"
8, " i004: (8U(s0p12.00h10.0v1s0b3T"
8, " i005: (8U(s0p10.00h12.0v0s3b3T"
8, " i006: (8U(s0p10.00h12.0v1s0b3T"
8, " "
8, " (i007 - i009 are for landscape mode)"
8, " (i010 - i017 are scale-able fonts)"
8, " (use form: (8U(s1p__v0s0b410T, where __ are the size numbers)"
8, " "
8, " (ECMA-94)"
8, " i018: (0N(s0p16.67h8.5v0s0b0T"
8, " i019: (0N(s0p12.00h10.0v0s0b3T"
8, " i020: (0N(s0p12.00h10.0v0s3b3T"
8, " i021: (0N(s0p12.00h10.0v1s0b3T"
8, " i022: (0N(s0p10.00h12.0v0s0b3T"
8, " i023: (0N(s0p10.00h12.0v0s3b3T"
8, " i024: (0N(s0p10.00h12.0v1s0b3T"
8, " "
8, " (i025 - i027 are for landscape mode)"
8, " "
8, " (PC-8)"
8, " PC very small"
8, " i028: (10U(s0p16.67h8.5v0s0b0T"
8, " PC small"
8, " i029: (10U(s0p12.00h10.0v0s0b3T"
8, " PC small bold"
8, " i030: (10U(s0p12.00h10.0v0s3b3T"
8, " PC small italic"
8, " i031: (10U(s0p12.00h10.0v1s0b3T"
8, " PC normal"
8, " i032: (10U(s0p10.00h12.0v0s0b3T"
8, " PC normal bold"
8, " i033: (10U(s0p10.00h12.0v0s3b3T"
8, " PC normal italic"
8, " i034: (10U(s0p10.00h12.0v1s0b3T"
8, " "
8, " (i035 - i037 are for landscape mode)"
8, " "
8, " (PC-8 DN)"
8, " i038: (11U(s0p16.67h8.5v0s0b0T"
8, " i039: (11U(s0p12.00h10.0v0s0b3T"
8, " i040: (11U(s0p12.00h10.0v0s3b3T"
8, " i041: (11U(s0p12.00h10.0v1s0b3T"
8, " i042: (11U(s0p10.00h12.0v0s0b3T"
8, " i043: (11U(s0p10.00h12.0v0s3b3T"
8, " i044: (11U(s0p10.00h12.0v1s0b3T"
8, " "
8, " (i045 - i047 are for landscape mode)"
8, " "
8, " (PC-850)"
8, " i048: (12U(s0p16.67h8.5v0s0b0T"
8, " i049: (12U(s0p12.00h10.0v0s0b3T"
8, " i050: (12U(s0p12.00h10.0v0s3b3T"
8, " i051: (12U(s0p12.00h10.0v1s0b3T"
8, " i052: (12U(s0p10.00h12.0v0s0b3T"
8, " i053: (12U(s0p10.00h12.0v0s3b3T"
8, " i054: (12U(s0p10.00h12.0v1s0b3T"
8, " "
8, " (i055 - i057 are for landscape mode)"
8, " "
8, " (LEGAL)"
8, " i058: (1U(s0p16.67h8.5v0s0b0T"
8, " i059: (1U(s0p12.00h10.0v0s0b3T"
8, " i060: (1U(s0p12.00h10.0v0s3b3T"
8, " i061: (1U(s0p12.00h10.0v1s0b3T"
8, " i062: (1U(s0p10.00h12.0v0s0b3T"
8, " i063: (1U(s0p10.00h12.0v0s3b3T"
8, " i064: (1U(s0p10.00h12.0v1s0b3T"
8, " "
8, " (i065 - i067 are for landscape mode)"
8, " "
8, " "
8, " landscape: &l1O"
8, " reverse-landscape: &l3O"
8, " land: &l1O"
8, " rland: &l3O"
8, " "
8, " (Roman-8)"
8, " i007: (8U(s0p16.67h8.5v0s0b0T"
8, " i008: (8U(s0p10.00h12.0v0s0b3T"
8, " i009: (8U(s0p10.00h12.0v0s3b3T"
8, " "
8, " (ECMA-94)"
8, " i025: (0N(s0p16.67h8.5v0s0b0T"
8, " i026: (0N(s0p10.00h12.0v0s0b3T"
8, " i027: (0N(s0p10.00h12.0v0s3b3T"
8, " "
8, " (PC-8)"
8, " i035: (10U(s0p16.67h8.5v0s0b0T"
8, " i036: (10U(s0p10.00h12.0v0s0b3T"
8, " i037: (10U(s0p10.00h12.0v0s3b3T"
8, " "
8, " (PC-8 DN)"
8, " i045: (11U(s0p16.67h8.5v0s0b0T"
8, " i046: (11U(s0p10.00h12.0v0s0b3T"
8, " i047: (11U(s0p10.00h12.0v0s3b3T"
8, " "
8, " (PC-850)"
8, " i055: (12U(s0p16.67h8.5v0s0b0T"
8, " i056: (12U(s0p10.00h12.0v0s0b3T"
8, " i057: (12U(s0p10.00h12.0v0s3b3T"
8, " "
8, " (LEGAL)"
8, " i065: (1U(s0p16.67h8.5v0s0b0T"
8, " i066: (1U(s0p10.00h12.0v0s0b3T"
8, " i067: (1U(s0p10.00h12.0v0s3b3T"
