1	Status
2	Options
3	Preferences
4	Identification
5	About
7	Infrared communication has been disabled. 
8	No infrared communication is in progress.
9	No available infrared devices are in range.
10	One available infrared device is in range.
11	Two or more available infrared devices are in range.
12	Infrared communication is in progress.
13	Infrared communication has been interrupted. Reposition your device or clear the obstruction within
14	seconds.
15	Infrared communication has been interrupted. Reposition your device or clear the obstruction within %u seconds.
24	Searching for devices in range every
25	seconds.
28	Software installation for Plug and Play devices in range is enabled.
30	Enable infrared communication
31	Search for devices in range
32	Enable Plug and Play
40	Infrared Monitor
41	(no name provided)
42	(no description provided)
43	Poor
44	Fair
45	Good
48	(Many retransmissions)
49	(Moderate retransmissions)
50	(No or few retransmissions)
52	Infrared disabled
53	No infrared communication
54	No available infrared devices in range
55	Available infrared device in range
56	Available infrared devices in range
57	Infrared communication in progress
58	Infrared communication interrupted
59	Control Panel\Infrared
60	IrEnabled
61	SearchingEnabled
62	SearchingInterval
63	PnpEnabled
64	Control Panel\Infrared4
65	Test
66	System\CurrentControlSet\control\ComputerName\ComputerName
67	System\CurrentControlSet\Services\VxD\VNETSUP
68	ComputerName
69	Comment
70	Control Panel\Infrared\Monitor
71	DisplayTaskbarIcon
72	OpenMonitor
73	UseSound
74	XYPosValid
75	XPos
76	YPos
77	AppEvents\EventLabels\
78	AppEvents\Schemes\Apps\.Default\
79	Infrared: Begin Device(s) In Range
80	Infrared: End Device(s) In Range
81	Infrared: Begin Communication
82	Infrared: End Communication
83	Infrared: Interrupted
84	(Default)
85	\.current
86	\.Default
87	\Media
88	\ir_begin.wav
89	\ir_end.wav
90	\ir_inter.wav
91	Enum\Infrared\Framer
92	PortName
93	InfraredBeginDeviceInRange
94	InfraredEndDeviceInRange
95	InfraredBeginCommunication
96	InfraredEndCommunication
97	InfraredInterrupted
98	infrared.hlp
99	Developed by Hewlett-Packard Company
100	Copyright © 1995 Hewlett-Packard Company\nDeveloped by Hewlett-Packard Company
101	LimitSpeed
102	SpeedLimit
103	Open
104	Your infrared software is not installed properly.
105	Infrared
106	Some programs are using an Infrared device. If you turn off infrared communication now, your programs may become unstable. Close these programs before turning off Infrared communication.\n\nAre you sure you want to disable infrared communication now?
107	Error %d: Your infrared software is not installed properly. Make sure your communications ports are configured properly, and then reinstall your infrared software.
108	Error %d: Your infrared software is out of memory. Close some open programs.
109	Error %d: The infrared port you have chosen (%s) is invalid.\n\nMake sure the port assigned to infrared communication exists and is working properly.
110	Error %d: The infrared port you have chosen (%s) is being used by another program. Close the program, and then try again.
111	Error %d: Your infrared software has encountered an internal error. Restart Windows, and then try again.
112	You must restart your computer before the new identification settings will take effect.\n\nDo you want to restart your computer now?
113	System Settings Change
114	2400 bps
115	9600 bps
116	19.2 kbps
117	38.4 kbps
118	57.6 kbps
119	115.2 kbps
120	576 kbps
121	1.152 Mbps
122	4 Mbps
123	Unknown Baud Rate
124	 at 
125	Cannot search for devices because other infrared devices are operating nearby.
126	Other infrared devices blocking operation
127	Error %d: Your infrared device did not initialize.\n\nMake sure the dongle is connected properly, is the correct type, and is using the correct driver.
128	Providing application support on 
129	Enum\Infrared\VirtualPorts
130	VirtualComPortName
131	VirtualLptPortName
132	 and 
133	The computer name contains invalid characters.\n You may use only letters, numbers, and the following symbols:\n!#$@%%&')(-.^_{}~ Note: The name must not be made up exclusively of periods (.).