*001* MENU BAR
   TO ACCESS THE MENU BAR, LEFT CLICK ON THE
DESIRED MENU ITEM: EITHER FILES, OPTIONS, CONFIG
OR HELP. A MENU WILL APPEAR BELOW THE CHOSEN
ITEM, LISTING FURTHER ITEMS THAT YOU MAY CHOOSE.
*002* STATUS LINE BAR
   THIS BAR ACROSS THE BOTTOM OF THE SCREEN CONT-
AINS THE CURRENTLY LOADED .DEF FILE SHOWN ON THE
LEFT END OF THE BAR. ANY IMPORTANT MESSAGES WILL
BE SHOWN ON THE REST OF THE BAR AS YOU USE POV
COMMANDER.
*003* COMMAND LINE BOX
   THE RIGHT HALF OF THE SCREEN IS DEVOTED TO
COMMAND LINE OPTIONS FOR POV. MOST OF THE OPTIONS
ARE TURNED ON BY LEFT CLICKING THE CHECKBOX
BESIDE THE OPTION, AND THEN (IF NEEDED) CLICKING
IN THE ACCOMPANING BOX TO ENTER DATA. SOME
OPTIONS ARE AVAILABLE ONLY FOR POV VERSION 2.0.
ALL OF THE OPTIONS YOU SELECT ARE THEN SAVED IN
A FILE WITH A .DEF EXTENSION, WHICH POV WILL
USE TO TRACE THE FILE.
*004* FILES BOX
   THE LEFT HALF OF THE SCREEN IS DEVOTED TO AN
ON-LINE FILE COMMANDER. FROM HERE YOU WILL
ASSIGN YOUR INPUT POV FILE, LIBRARY PATHS, ECT.,
BY DRAGGING AND DROPPING THEM WHERE YOU NEED TO.
   THERE IS ALSO A FILE MASK SELECTION BOX THAT
CAN BE ACCESSED BY CLICKING ON THE LINE THAT SHOWS
THE CURRENT PATH AT THE TOP OF THE FILES BOX.
   DIRECTORIES ARE SHOWN WITHIN <> SYMBOLS. TO
CHANGES DIRECTORIES, DOUBLE CLICK ON THE ONE
YOU WANT. <.\> WILL TAKE YOU BACK TO THE ROOT OF
THE CURRENT DRIVE AND <..\> WILL TAKE YOU BACK
ONE DIRECTORY.
*005* DRIVES
   THE BAR AT THE TOP OF THE FILES WINDOW SHOWS
WHICH DRIVES ARE AVAILABLE. TO CHANGE TO A NEW
DRIVE, SIMPLY CLICK ON THE DRIVE LETTER THAT
YOU WANT.
*006* CURRENT PATH
   THE SECOND BAR AT THE TOP OF THE FILES BOX
DISPLAYS THE CURRENT PATH. IF YOU LEFT CLICK
ON THIS BAR, A MENU WILL APPEAR THAT WILL ALLOW
YOU TO SELECT A NEW FILE MASK THAT SCREENS WHICH
FILES ARE SHOWN IN THE FILE BOX.
   FOR EXAMPLE, *.DEF WILL SHOW ONLY FILES WITH
AN EXTENSION OF .DEF.
   TO CHANGE THE CURRENTLY SHOWN PATH, DOUBLE
CLICK ON ONE IN THE FILES BOX. DIRECTORIES ARE
SHOWN WITHIN <> SYMBOLS.  <.\> WILL TAKE YOU
BACK TO THE ROOT OF THE CURRENT DRIVE AND <..\>
WILL TAKE YOU BACK ONE DIRECTORY.
*007* NEW 
   THIS COMMAND WILL RESET ALL OF THE POV OPTIONS
TO THEIR DEFAULT STATE, AND GIVE YOU A FRESH
SLATE TO WORK FROM.
*008* LOAD A .DEF FILE
   THIS COMMAND WILL BRING UP A LIST OF ALL
AVAILABLE .DEF FILES. CLICK THE ONE YOU WANT AND
HIT LOAD.
*009* SAVE A .DEF FILE
  THIS COMMAND WILL SAVE YOUR POV OPTIONS UNDER
THE .DEF FILE NAME SHOWN AT THE BOTTOM LEFT
HAND OF THE STATUS BAR. ALL .DEF FILES ARE
ALWAYS SAVED TO THE DIRECTORY WHERE POV IS AT,
WHICH IS WHERE POV WILL LOOK FOR THEM.
*010*	SAVE AS
   THIS COMMAND FUNCTIONS THE SAME AS THE SAVE
COMMAND, EXCEPT THAT YOU ARE PROMPTED FOR A NEW
NAME TO SAVE THE .DEF FILE AS.
*011* EDIT POV FILE
   THIS COMMAND WILL ALLOW YOU TO VIEW AND EDIT
THE .POV FILE SHOWN CURRENTLY AS THE INPUT FILE
IN THE POV OPTIONS SECTION. WHEN YOU ARE DONE
EDITING THE FILE, YOU ARE AUTOMATICALLY RETURNED
TO POV COMMANDER.
   TO EDIT ANY OTHER FILE, FIND IT IN THE FILE
COMMANDER WINDOW AND DOUBLE CLICK ON IT. ALL
FILES ARE EDITED USING DOS EDIT.
*012* RUN POV
   THIS COMMAND WILL RUN POV USING THE CURRENTLY
LOADED .DEF FILE SHOWN ON-SCREEN.
*013* HELP BUTTON
   WHAT YOU ARE CURRENTLY USING NOW!
*014* EXIT
   THIS COMMAND ALLOWS YOU TO EXIT BACK TO DOS.
YOU WILL BE ASKED TO SAVE ANYTHING THAT HAS NOT
BEEN SAVED, UNLESS YOU HAVE AUTO-SAVE TURNED ON.
*015* .DEF FILE DISPLAY
   THIS AREA DISPLAYS THE CURRENTLY LOADED .DEF
FILE. TO LOAD A NEW .DEF FILE, DRAG IT FROM THE
FILES BOX AND RELEASE IT ON TOP OF THE OLD .DEF
FILE SHOWN HERE. THE NEW FILE WILL BE LOADED.
OR USE THE LOAD COMMAND.
*016* STATUS REPORT LINE
   THIS LINE CONTAINS VALUABLE INFORMATION
CONCERNING WHAT YOU MAY OR MAY NOT DO AT ANY
GIVEN TIME. KEEP YOUR EYE ON IT.
*017* POV VERSION
   THIS AREA DISPLAYS WHICH VERSION OF POV THE
.POV FILE WAS WRITTEN FOR. THIS CAN BE CHANGED
IN THE OPTIONS MENU.
*018* HEIGHT
   THIS IS WHERE YOU ENTER A HEIGHT VALUE FOR
YOUR PICTURE.
*019* WIDTH
   THIS IS WHERE YOU ENTER A WIDTH VALUE FOR
YOUR PICTURE.
*020* DISPLAY TYPE
   CLICK THIS CHECKBOX IF YOU WISH TO VIEW
YOUR PICTURE AS IT IS BEING RENDERED. CLICK
INSIDE THE BOX TO CHOOSE YOUR VIDEO CARD.
*021* STATISTIC DISPLAY
   CLICK THIS CHECKBOX TO SEE THE STATISTICS
AS YOUR PICTURE IS BEING RENDERED.
*022* ABORT WITH KEYPRESS
   THIS OPTION ALLOWS YOU TO ABORT A RENDER
ONCE POV HAS STARTED. THIS OPTION IS RECOMMENDED.
*023* CONTINUE ABORTED IMAGE
   THIS OPTION WILL ALLOW YOU TO CONTINUE A
RENDER THAT WAS PREVIOUSLY ABORTED AS IT WAS
BEING TRACED.
*024* PAUSE AFTER TRACE
   THIS OPTION WILL PAUSE POV AFTER IT HAS
FINISHED RENDERING A PICTURE. NOT RECOMMENDED
IF YOU PLAN ON USING THE BATCH RUNNER.
*025* CLOCK VALUE
   THIS IS WHERE YOU ENTER THE CLOCK VALUE FOR
THIS PICTURE IF YOU ARE DEALING WITH ANIMATION.
*026* INPUT FILE
   THIS AREA SHOWS THE INPUT (.POV) FILE THAT
POV WILL USE TO TRACE YOUR PICTURE. TO ASSIGN
A .POV FILE HERE, FIND ONE IN THE FILES BOX,
AND THEN DRAG AN DROP IT HERE. YOU WILL SEE
THE NEW INPUT FILE NAME APPEAR IN THE BOX.
*027* OUTPUT FILE
   IF YOU WANT YOUR PICTURE SAVED TO DISK,
CLICK THE CHECKBOX HERE, AND ENTER A NAME TO
SAVE THE PICTURE AS.
*028* LIBRARY PATHS
   THESE TEN SLOTS HOLD THE PLACES FOR YOUR
LIBRARY PATHS. THESE PATHS LET POV KNOW WHERE
TO FIND THE FILES YOU WANT TO TRACE.
   TO ASSIGN A PATH TO ONE OF THESE SLOTS, FIND
THE DIRECTORY (ONE WITH THE <> SYMBOLS) IN THE
FILES BOX, AND DRAG AND DROP IT TO ONE OF THESE
SLOTS. YOU WILL SEE IT APPEAR HERE.
   TO DELETE A PATH FROM ONE OF THESE SLOTS,
DOUBLE CLICK ON IT.
   YOU CAN LOAD AND SAVE LIBRARY PATH GROUPS WITH
THE COMMANDS IN THE CONFIG MENU.
FOR MORE ON LIBRARY PATHS, SEE YOUR POV
DOCUMENTATION.
*029* RENDER QUALITY
   THIS IS WHERE YOU ENTER THE QUALITY FOR YOUR
PICTURE. 9 IS THE BEST.
*030* ANTI-ALIASING
   ENTER YOUR ANTI-ALIASING VALUE HERE.
*031* NUMBER OF RAYS
   ENTER YOUR NUMBER OF RAYS VALUE HERE.
*032* JITTER
   ENTER YOUR JITTER VALUE HERE.
*033* BOUNDING SLABS
   ENTER THE MINIMUM NUMBER OF OBJECTS THERE
MUST BE IN YOUR PICTURE BEFORE POV WILL USE
BOUNDING SLABS.
*034* START LINE
   TO TRACE ONLY PART OF YOUR PICTURE, ENTER THE
STARTING LINE HERE.
*035* END LINE
   TO TRACE ONLY PART OF YOUR PICTURE, ENTER THE
ENDING LINE HERE.
*036* START ROW
   TO TRACE ONLY PART OF YOUR PICTURE, ENTER THE
STARTING ROW HERE.
*037* END ROW
   TO TRACE ONLY PART OF YOUR PICTURE, ENTER THE
ENDING ROW HERE.
*038* START COLUMN
   TO TRACE ONLY PART OF YOUR PICTURE, ENTER THE
STARTING COLUMN HERE.
*039* END COLUMN
   TO TRACE ONLY PART OF YOUR PICTURE, ENTER THE
ENDING COLUMN HERE.
*040* VIEW INCLUDE CHAIN
   THIS COMMAND WILL BRING UP A WINDOW THAT
DISPLAYS WHICH FILES ARE INCLUDED IN YOUR .POV
FILE. THIS IS VERY USEFUL TO MAKE SURE THAT YOU
HAVE ALL OF THE PROPER LIBRARY PATHS SELECTED.
IF A FILE THAT IS NEEDED CANNOT BE FOUND IN YOUR
LIBRARY PATHS, IT WILL SAY SO.
*041* POV BATCH RUNNER
   THIS COMMAND BRINGS UP A WINDOW THAT ALLOWS
YOU TO TRACE UP TO 50 .DEF FILES IN SUCCESSION.
THIS IS USEFUL FOR ANIMATION TRACING.
   THESE BATCH FILES CAN BE LOADED AND SAVED AS
GROUPS.
*042* USER CONFIGURABLE BUTTONS
   THESE BUTTONS ARE USER DEFINABLE TO RUN ANY
PROGRAM YOU WISH. SIMPLY FIND THE PROGRAM YOU
WANT THE BUTTON TO RUN IN THE FILES BOX, AND
DRAG AND DROP IT TO THE BUTTON YOU WISH. A MENU
WILL APPEAR IN WHICH YOU CAN GIVE THE BUTTON A
TITLE AND ENTER ANY COMMAND LINE PARAMETERS THE
PROGRAM NEEDS. YOU MUST ENTER A TITLE FOR THE
BUTTON TO WORK.
   A @POV SYMBOL IN THE COMMAND LINE PARAMETERS
WILL INCLUDE THE CURRENT INPUT FILE NAME (.POV)
WHEN THE BUTTON IS RUN. THIS IS USEFUL FOR
PROGRAMS THAT HELP EDIT .POV FILES.
   A #POV SYMBOL IN THE COMMAND LINE PARAMETERS
WILL INCLUDE THE CURRENT OUTPUT FILE NAME
(USUALLY .TGA) WHEN THE BUTTON IS RUN. THIS IS
USEFUL FOR IMAGE VIEWERS AND THE LIKE.
   TO EDIT THE BUTTON LATER, DOUBLE LEFT CLICK
ON IT.
*043* OUTPUT FILE PATH
   THIS BOX HOLDS THE PATH WHERE YOUR OUTPUT
FILE WILL BE WRITTEN TO. TO ASSIGN A NEW PATH
HERE, DRAG ONE FROM THE FILE WINDOW, OR CLICK
IN THIS BOX TO BRING UP A SELECTION OF DEFAULT
PATHS TO CHOOSE FROM.
*044* LAST USED DEF FILES
   THE LAST FIVE DEF FILES YOU HAVE WORKED ON
APPEAR AT THE BOTTOM OF THE FILES MENU FOR EASY
LOADING. SIMPLY CLICK ON THE ONE YOU WANT TO
AUTOMATICALLY LOAD IT. THE FIRST ONE IS LOADED
EACH TIME POV COMMANDER STARTS, AND IS ALWAYS
THE CURRENTLY OPENED FILE.
*045* DEF FILES...
   DEF FILES (OR DEFINITION FILES) ARE USED TO
STORE ALL OF YOUR POV OPTIONS. POVRAY WILL USE
THIS FILE WHEN YOU TACE YOUR PICTURE TO FIND
OUT WHICH OPTIONS YOU HAVE SELECTED.
*046* PTH FILES...
   PATH FILES ARE USED BY POV COMMANDER TO
STORE VARIOUS PATH GROUPS THAT YOU MAKE. USE
THE SAVE LIBRAY PATHS AND LOAD LIBRARY PATHS
COMMANDS IN THE OPTIONS MENU.
*047* BAT FILES...
   BATCH FILES HOLD THE DEF GROUPS THAT YOU
MAKE IN THE BATCH RUNNER WINDOW.  THESE GROUPS
ARE SET UP SO THAT POV WILL RUN THEM IN
SUCCESSION, ALLOWING YOU TO TRACE UP TO FIFTY
POV FILES IN SUCCESSION.
*048* FILE MASK...
   CLICKING ON THE BAR IN THE FILES WINDOW THAT
DISPLAYS THE CURRENT PATH WILL BRING UP THE
FILE MASK MENU. THIS MENU ALLOWS YOU TO SELECT
A NEW FILE MASK OR ENTER YOUR OWN. THESE MASKS
DETERMINE WHICH FILES ARE DISPLAYED IN THE
FILE COMMANDER. A *.* MASK WILL CAUSE ALL
POSSIBLE FILES TO BE DISPLAYED.
*049* LOAD LIBRARY PATH...
   TO LOAD A LIBRARY PATH GROUP FROM THE FILE
WINDOW, FIND THE DESIRED .PTH FILE AND DRAG
IT ONTO THE LIBRARY PATHS SECTION. THE NEW
LIBRARY PATHS FROM THE .PTH FILE WILL BE
LOADED AND DISPLAYED.
(SEE ALSO: CONFIG MENU - LOAD LIBRARY PATHS)
*050* POV COMMANDER HELP
WHAT ARE...?
HOW TO...
MENUS...
FILES WINDOW...
POV OPTIONS WINDOW...
USER CONFIGURABLE BUTTONS...
BATCH RUNNER...
*051* WHAT ARE...?
DEF FILES...
PTH FILES...
BAT FILES...
*052* HOW TO...
TRACE A POV FILE...
TRACE MULTIPLE POV FILES...
USE CONFIGURABLE BUTTONS...
ENTER REGISTERED PASSWORD...
SET UP POV COMMANDER...
*053* MENUS...
FILES...
OPTIONS...
CONFIG...
HELP...
*054* FILES WINDOW...
CHANGE DRIVE...
CHANGE DIRECTORY...
FILE MASK...
LOAD DEF FILE...
LOAD LIBRARY PATHS...
EDIT FILE...
*055* FILES MENU...
NEW...
LOAD...
SAVE...
SAVE AS...
EXIT...
LAST USED DEF FILES (1-5)...
*056* OPTIONS MENU...
RUN POV...
EDIT...
VIEW INCLUDES...
BATCH RUNNER...
HEIGHT & WIDTH...
PALLET TYPE...
BUFFER SIZE...
OUTPUT FILE TYPE...
OUTPUT FILE PATH...
NUMBER OF SYMBOLS...
CHANGE POV VERSION...
VIEW LAST OUTPUT...
*057* CONFIG MENU...
PROGRAM LOCATIONS...
SAVE CONFIGURATION...
POV EXE VERSION...
SAVE LIBRARY PATHS...
LOAD LIBRARY PATHS...
AUTO SAVE ON/OFF...
*058* HELP MENU...
CONTENTS...
SCREEN...
REGISTER...
ABOUT...
*059* USER CONFIGURABLE BUTTONS...
ASSIGNING PROGRAMS TO...
PARAMETERS...
CLEAR...
EDITING...
*060* BATCH RUNNER...
ADDING DEF'S...
MOVING DEF'S...
DELETING DEF'S...
CLEARING...
SAVE GROUP...
LOAD GROUP...
RUNNING A GROUP...
*061* POV OPTIONS...
POV VERSION...
WIDTH...
HEIGHTH...
DISPLAY TYPE...
STATISTIC DISPLAY...
ABORT WITH KEYPRESS...
CONTINUE ABORTED IMAGE...
PAUSE AFTER TRACE...
CLOCK VALUE...
INPUT FILE...
OUTPUT FILE...
OUTPUT FILE PATH...
RENDER QUALITY...
ANTI-ALIASING...
NUMBER OF RAYS...
JITTER...
BOUNDINGS...
START LINE...
END LINE...
START ROW...
END ROW...
START COLUMN...
END COLUMN...
LIBRARY PATHS...
*062*

*063*

*064*

*065*

*066*

*067*

*068*

*069*

*070*

*071* EDIT FILE...
   DOUBLE CLICKING ON ANY FILE IN THE FILES
WINDOW WILL CAUSE IT TO BE OPENED FOR EDITING.
DOS EDIT IS USED FOR THIS PURPOSE.
*072* LOAD DEF FILE...
   TO LOAD A DEF FILE FROM THE FILES WINDOW,
FIND THE DESIRED .DEF FILE AND DRAG IT TO THE
BOTTOM OF THE SCREEN, DROPPING IT ON TOP OF
THE LEFT HAND AREA OF THE STATUS BAR WHERE
THE OLD DEF FILE IS DISPLAYED. THE NEW DEF
FILE WILL PROMPTLY BE LOADED AND DISPLAYED.
*073* ASSIGNING USER BUTTONS
   TO ASSIGN A PROGRAM TO THE A USER CONFIG-
URABLE BUTTON, FIND IT IN THE FILES WINDOW,
AND THEN DRAG-AND-DROP IT ONTO ONE OF THE
FOUR USER CONFIGURABLE BUTTONS. A WINDOW WILL
POP UP IN WHICH YOU CAN ASSIGN A TITLE AND
PARAMETERS TO THE PROGRAM. YOU MUST ASSIGN A
TITLE IN ORDER FOR THE BUTTON TO WORK.
*074* USER BUTTON PARAMETERS
   PARAMETERS ARE USED FOR PROGRAMS THAT
CAN TAKE INPUT WHEN THEY ARE CALLED. THIS
OPTION LETS YOU ENTER ANY NEEDED PARAMETERS.
   A @POV SYMBOL IN THE COMMAND LINE PARAMETERS
WILL INCLUDE THE CURRENT INPUT FILE NAME (.POV)
WHEN THE BUTTON IS RUN. THIS IS USEFUL FOR
PROGRAMS THAT HELP EDIT .POV FILES.
   A $POV SYMBOL IN THE COMMAND LINE PARAMETERS
WILL INCLUDE THE CURRENT INPUT FILE NAME (.POV)
AND ITS PATH WHEN THE BUTTON IS RUN. THIS IS
USEFUL FOR PROGRAMS THAT HELP EDIT .POV FILES.
   A #POV SYMBOL IN THE COMMAND LINE PARAMETERS
WILL INCLUDE THE CURRENT OUTPUT FILE NAME
(USUALLY .TGA) WHEN THE BUTTON IS RUN. THIS IS
USEFUL FOR IMAGE VIEWERS AND THE LIKE.
*075* CLEAR USER BUTTON
   TO CLEAR THE USER BUTTON, CLICK THE CLEAR
BUTTON. YOU WILL NOT BE ABLE TO USE THE BUTTON
AGAIN UNTIL YOU RE-ASSIGN IT TO A NEW PROGRAM.
*076* EDIT USER BUTTON
   TO EDIT A USER CONFIGURABLE BUTTON, DOUBLE
CLICK ON IT TO BRING UP THE EDIT WINDOW. THIS
WILL ONLY WORK IF THE BUTTON HAS ALREADY BEEN
ASSIGNED TO A PROGRAM.
*077* ADD DEF'S
   TO ADD DEF FILES TO THE BATCH RUNNER, FIND
THE DESIRED DEF FILE IN THE FILES WINDOW AND
DRAG IT TO THE BATCH RUNNER WINDOW. THE DEF
FILE WILL BE INSERTED WHERE YOU DROP IT.
*078* MOVING A DEF
   TO CHANGE THE ORDER OF THE DEF FILES LISTED
IN THE BATCH RUNNER DEF FILE LIST, DRAG THE
DESIRED FILE TO ITS NEW POSITION. IT WILL BE
INSERTED THERE AND THE LIST WILL BE ADJUSTED.
*079* DELETE A DEF
   TO DELETE A DEF FILE FROM THE BATCH RUNNER
LIST, SIMPLY DOUBLE CLICK ON IT. THE LIST WILL
BE ADJUSTED TO REFLECT THE CHANGE.
*080* CLEAR DEF FILE LIST
   TO CLEAR ALL FILES FROM THE BATCH FILE LIST,
HIT THE CLEAR BUTTON.
*081* SAVE BATCH GROUP
   TO SAVE THE CURRENT DEF GROUP DISPLAYED IN
THE BATCH FILE LIST, HIT THE SAVE BUTTON AND
ENTER A NAME FOR THE FILE.
*082* LOAD BATCH GROUP
   TO LOAD A DEF GROUP INTO THE BATCH RUNNER,
HIT LOAD TO BRING UP THE LOAD WINDOW. CLICK ON
THE DESIRED .BAT FILE AND HIT LOAD.
*083* RUN BATCH RUNNER
   TO BEGIN TRACING ALL OF THE DEF FILES
LISTED IN THE BATCH RUNNER LIST, HIT RUN POV.
*084* Height & Width
   THIS COMMAND BRINGS UP A WINDOW THAT ALLOWS
FOR THE EASY CHOOSING OF HEIGHT AND WIDTH 
VALUES. SIMPLY CLICK ON THE HEIGHT AND WIDTH 
VALUES YOU WISH YOUR PICTURE TO HAVE, OR ENTER
YOUR OWN CUSTOM VALUES. 
*085* PALLET TYPE
   THIS COMMAND BRINGS UP A WINDOW THAT ALLOWS
YOU TO CHOOSE THE APPROPRIATE PALLET TYPE FOR
YOUR VIDEO CARD.
*086* BUFFER
   THIS COMMAND ALLOWS YOU TO ENTER HOW POV
WILL BUFFER ITS OUTPUT. YOU MAY CHOOSE TO 
HAVE IT WRITE TO THE FILE AFTER EVERY LINE, OR
AFTER EVERY 'N' KILOBYTES.
*087* OUTPUT FILE TYPE
   THIS COMMAND ALLOWS YOU TO CHOOSE BETWEEN
EITHER TGA, DUMP, OR RAW OUTPUT FILE TYPE. 
THE OUTPUT FILE NAME IS AUTOMATICALLY ADJUSTED
AFTER YOUR FINAL CHOICE IS MADE.
*088* OUTPUT FILE PATH
   THIS COMMAND ALLOWS YOU TO CHOOSE AN OUT-
PUT PATH FOR YOUR OUTPUT FILE. YOU MAY CHOOSE
FROM ONE OF THE TWO DEFAULT AREAS, OR ENTER
YOUR OWN DEFAULT AREA.
   YOU CAN ALSO ENTER AN OUTPUT PATH ON THE 
MAIN SCREEN BY DRAGGING IT FROM THE FILES
WINDOW ONTO THE PLACE WHERE THE OUTPUT PATH IS
SHOWN.
*089* NUMBER OF SYMBOLS
   THIS IS WHERE YOU ENTER THE NUMBER OF 
SYMBOLS FOR POV. IF YOU ARE RECEIVING ERRORS
FROM POV ABOUT NOT ENOUGH SYMBOLS OR ARE 
WORKING WITH HUGE POV FILES, YOU MIGHT TRY
INCREASING THIS NUMBER.
*090* TRACE A POV FILE
   FIRST, FIND THE .POV FILE YOU WANT TO 
TRACE IN THE FILES WINDOW. ONCE FOUND, DRAG
IT TO THE INPUT FILE BOX AND RELEASE IT. IF
YOU WANT THE TRACE SAVED TO AN OUTPUT FILE,
CHECK THE OUTPUT FILE BOX AND ENTER THE NAME
YOU WANT IT SAVED AS. SELECT ALL OF THE
OTHER OPTIONS IN THE OPTIONS WINDOW THAT
YOU WANT FOR THIS TRACE. 
   NOW ENTER ANY LIBRARY PATHS THAT ARE 
NEEDED FOR THIS POV FILE. POV FILES CAN
INCLUDE OTHER FILES IN THEM, SO YOU NEED TO
LET POV KNOW WHERE ALL THESE FILES ARE. FIND
THE DIRECTORIES WHERE THEY RESIDE, AND DRAG
THEM TO THE LIBRARY PATHS AREA.
   A NEAT WAY TO MAKE SURE YOU HAVE ALL THE 
RIGHT LIBRARY PATHS INCLUDED IS TO RUN THE
VIEW INCLUDES CHAIN BUTTON. IF ANY OF THE 
FILES THAT ARE INCLUDED IN YOUR INPUT FILE
CANNOT BE FOUND IN YOUR LIBRARY PATHS, IT WILL 
LET YOU KNOW THE NAME OF THE INCLUDE FILE IT
COULD NOT FIND. IT WILL ALSO LIST ALL OTHER 
INCLUDE FILES FOR YOU TO SEE.
   ONCE EVERYTHING IS SET UP, JUST CHOOSE
RUN POV, AND YOUR OFF! POV COMMANDER WILL
AUTOMATICALLY RETURN AFTER POVRAY IS DONE.
*091* TRACING MULTIPLE FILES
   FIRST, MAKE ALL OF THE DEF FILES YOU WANT
TO TRACE. ONCE THIS IS DONE, CHOOSE THE 
BATCH RUNNER COMMAND. DRAG ALL OF THE DEF
FILES YOU WANT TO TRACE INTO THE BATCH
RUNNER LIST. RE-ARRANGE THEM AS NECESSARY TO
GET THEM IN THE ORDER YOU WANT THEM TO BE
TRACED BY POV. IF YOU WANT TO SAVE THE CURRENT
GROUP, YOU CAN. THIS IS HELPFUL TO GIVE THE 
GROUP A NAME.
   WHEN YOU HAVE ALL THE DEF FILES LISTED 
THAT YOU WANT TO TRACE, HIT RUN POV.
*092* USER CONFIGURABLE BUTTONS
   TO ASSIGN A PROGRAM TO THESE BUTTONS, 
SIMPLY FIND THE PROGRAM YOU WANT TO RUN IN
THE FILES WINDOW, AND THEN DRAG IT ONTO ONE
OF THE FOUR USER CONFIGURABLE BUTTONS. A 
WINDOW WILL APPEAR ALLOWING YOU TO ENTER A
TITLE FOR THE BUTTON. THIS MUST BE DONE IN
ORDER FOR THE BUTTON TO WORK. YOU CAN ALSO
ENTER ANY COMMAND-LINE PARAMETERS THAT THE
PROGRAM MAY NEED. WHEN YOU ARE DONE, HIT OK.
   TO RUN THE NEW BUTTON, CLICK ON IT. TO 
EDIT THE BUTTON AFTER YOU HAVE ASSIGNED A 
PROGRAM TO IT, DOUBLE CLICK ON IT.
*093* ENTER REGISTERED PASSWORD
   CHOOSE REGISTER FROM THE HELP MENU. A
WINDOW WILL APPEAR THAT HAS ENTRY PLACES
FOR YOUR REGISTERED NAME AND PASSWORD. 
ENTER THEM EXACTLY AS SHOWN ON THE FORM
YOU RECEIVED WHEN YOU REGISTERED POV COM-
MANDER.
*094* SETTING UP POV COMMANDER
   THE MOST IMPORTANT THING FOR POV 
COMMANDER IS THE PROGRAM LOCATIONS IN THE 
CONFIG MENU. THIS IS WHERE YOU ENTER THE 
PATHS TO POVRAY.EXE AND POVCOMM.EXE. 
WITHOUT THESE ENTERED CORRECTLY, THINGS
MAY NOT WORK RIGHT.
   IT IS ALSO CONVENIENT TO TURN THE
AUTO-SAVE OPTION ON IN THE CONFIG MENU. IT
CAN GET TIRING WHEN POV COMMANDER ASKS YOU
IF YOU WANT TO SAVE SOMETHING EVERY TIME
THE PROGRAM SHELLS OUT TO DO SOMETHING.
*095* SAVE LIBRARY PATHS
   THIS ALLOWS YOU TO ENTER A NAME TO SAVE
THE CURRENTLY LISTED FILE PATHS AS. THIS
IS USEFUL FOR THOSE TIMES WHEN YOU USE THE 
SAME LIBRARY PATHS IN MANY DIFFERENT FILES.
*096* LOAD LIBRARY PATHS
   THIS ALLOWS YOU TO CHOOSE FROM THE 
AVAILABLE LIBRARY PATHS FILES THAT YOU HAVE
PREVIOUSLY SAVED.
   CLICK ON THE FILE YOU WANT AND HIT LOAD.
*097* AUTO SAVE ON/OFF
   CLICKING THIS OPTION TOGGLES THE STATE
OF THE AUTO SAVE. WHEN IT IS ON, SAVING IS
DONE AUTOMATICALLY EVERY TIME YOU EXIT OR
SHELL OUT OF POV COMMANDER.
*098* CONTENTS
   THE CONTENTS OPTION IN THE HELP MENU 
LISTS THE FIRST IN A SERIES OF LEVELS THAT
YOU CAN BROWSE THROUGH TO GET HELP ON ALL
ASPECTS OF POV COMMANDER.
*099* SCREEN
   THIS HELP MENU OPTION ALLOW YOU TO CHOOSE
WITH THE MOUSE WHAT YOU WANT HELP ON BY
CLICKING THE SCREEN AREA.
*100* REGISTER
   IF YOU HAVE REGISTERED POV COMMANDER,
YOU CAN CLEAR THE SHAREWARE SCREEN BY 
ENTERING YOUR REGISTERED NAME AND PASSWORD 
HERE.
*101* ABOUT
   THIS TELLS WHICH VERSION OF POV 
COMMANDER YOU ARE USING.
*102* CHANGE POV
   IF YOU ARE USING AN OLD POV FILE WRITTEN
FOR POVRAY VERSION 1.0, CLICK THIS OPTION
TO PUT YOU INTO POVRAY 1.0 MODE. CLICKING
IT AGAIN TOGGLES YOU BACK.
*103* VIEW LAST OUTPUT
   THIS OPTION IS USEFUL FOR THOSE TIMES 
WHEN AN ERROR OCCURRED IN POV. IT ALLOWS YOU
TO SEE POVRAY'S LAST OUTPUT.
*104* PROGRAM LOCATIONS
   THIS IS WHERE YOU ENTER THE PATHS FOR
BOTH POVRAY.EXE AND POVCOMM.EXE. THIS IS
VERY IMPORTANT, AS THINGS WILL NOT RUN RIGHT
IF THESE ENTRIES ARE NOT MADE.
*105* SAVE CONFIGURATION
   THIS ALLOWS YOU TO SAVE THE CONFIGURATION
MANUALLY AT ANY TIME. IT WILL NOT, HOWEVER
SAVE THE DEF FILE. ONLY THE WAY POV COM-
MANDER IS SET UP WILL BE SAVED.
*106* POVRAY.EXE VERSION
   THIS IS WHERE YOU ENTER WHICH VERSION OF
POVRAY YOU ARE USING.
*END*