Subject: FT-50

You take off the battery pack.. remove the sticker on the radio.. undo
the screws (but not all of the way)-- you push on the screws and the
keypad will come loose on the other side.  Undo the screws all of the way
to get access to underneath the keypad.  There are 3 areas where there can
be colser pads.  Remove the #1 solder pad .  AKA there should bo NO solder
pads connected.  Put the radio back together.. and reset the cpu and
enable the Extended RX mod by using the "knob".
It will now go just about everywhere.

-- Sacramento
   .-.                                                               .-.
  /   \           .-.                                 .-.           /   \
 /     \         /   \       .-.     _     .-.       /   \         /     \
/-ChrisMorgan KB6YBY--------/---\---/-\---/---\-----/-----\dude@calweb.com\
         \     /       \   /     `-'   `-'     \   /       \     /
          \   /         `-'                     `-'         \   /
           `-'                                               `-'