[Identification]
    OptionType = NetDriver
[Options]
    NCDETECT
[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
ServiceKeyName  = "NetDetect"
ServiceKeyPath  = "System\CurrentControlSet\Services\NcDetect"
ServiceSysPath  = "%SystemRoot%\System32\Drivers\netdtect.sys"
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        goto returnoptions
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    read-syms FileConstants$(!STF_LANGUAGE)
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        set StartLabel = configureadapter
        Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error: cannot get an error string."
                goto ShellCodeError
            endif
            set Error = $($R0)
            set from = end
            set to = end
            goto Warning
        endif
    else
        set StartLabel = installadapter
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ServiceKeyPath) $(MAXIMUM_ALLOWED) KeyService
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyService)
        Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
            $(ProductVersion)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error: cannot get an error string."
            goto ShellCodeError
        endif
        goto end
    endif
    goto nextstep
configureadapter = +
    set OldVersionExisted = $(TRUE )
    goto nextstep
nextstep = +
    StartWait
    Goto nofilestocopy
    ifstr(i) $(!NTN_InstallMode) == "install"
        Ifstr(i) $(DoCopy) == "YES"
           Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
           Ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Goto fatal
           Else-Ifstr(i) $($R0) == STATUS_FAILED
               Goto fatal
           Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
           Endif
           Set SrcDir = $($R1)
        Endif
        install "Install-Option"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
           goto fatal
        endif
    endif
nofilestocopy =+
    Ifint $(OldVersionExisted) != $(FALSE)
        Goto writeparameters
    Endif
    set OEM_ABANDON_ON = TRUE
createservice =+
   Shell $(UtilityInf), CreateService, $(ServiceKeyName), $(ServiceDisplayName),+
         $(ServiceSysPath), "kernel", "", {}, "", "%SystemRoot%\System32\IoLogMsg.dll"
   Ifint $($ShellCode) != $(!SHELL_CODE_OK)
       Debug-Output "OEMNSVRP.INF: ShellCode error creating NETDTECT service"
       goto ShellCodeError
   endif
   Set RegistryErrorIndex = $($R0)
   CloseRegKey $($R1)
   CloseRegKey $($R2)
   CloseRegKey $($R3)
   Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
      EndWait
      Debug-Output "OEMNSVRD.INF: Registry error: creating NETDTECT service"
      CloseRegKey $($R2)
      Goto fatalregistry
   Endif
    Shell $(UtilityInf) UpdateDetectionDllNames
writeparameters = +
    EndWait
    goto successful
bindingadapter =+
    set Error = "RPC INF file invoked during bindings review."
    goto fatal
removeadapter = +
    Set OEM_ABANDON_OPTIONS = {$(ServiceKeyName)}
    ForListDo $(OEM_ABANDON_OPTIONS)
        debug-output "OEMNSVRP.INF: Remove component: "$($)
        Shell $(UtilityInf), RemoveService, $($), $(UseSvcctrl)
    EndForListDo
    goto end
UpgradeSoftware = +
    set Error = "Upgrade/update not supported for this product yet."
    goto fatal
successful = +
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), STATUS, $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatal = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "NONFATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto removeadapter
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-DLL-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)
   CopyFilesInCopyList
   exit
[Source Media Descriptions]
    1	= "Windows NT Advanced Server Setup Disk #1"   , TAGFILE = disk1
    2	= "Windows NT Advanced Server Setup Disk #2"   , TAGFILE = disk2
    3	= "Windows NT Advanced Server Setup Disk #3"   , TAGFILE = disk3
    4	= "Windows NT Advanced Server Setup Disk #4"   , TAGFILE = disk4
    5	= "Windows NT Advanced Server Setup Disk #5"   , TAGFILE = disk5
    6	= "Windows NT Advanced Server Setup Disk #6"   , TAGFILE = disk6
    7	= "Windows NT Advanced Server Setup Disk #7"   , TAGFILE = disk7
    8	= "Windows NT Advanced Server Setup Disk #8"   , TAGFILE = disk8
    9	= "Windows NT Advanced Server Setup Disk #9"   , TAGFILE = disk9
    10	= "Windows NT Advanced Server Setup Disk #10"  , TAGFILE = disk10
    11	= "Windows NT Advanced Server Setup Disk #11"  , TAGFILE = disk11
    12	= "Windows NT Advanced Server Setup Disk #12"  , TAGFILE = disk12
    13	= "Windows NT Advanced Server Setup Disk #13"  , TAGFILE = disk13
    14	= "Windows NT Advanced Server Setup Disk #14"  , TAGFILE = disk14
    15	= "Windows NT Advanced Server Setup Disk #15"  , TAGFILE = disk15
    16	= "Windows NT Advanced Server Setup Disk #16"  , TAGFILE = disk16
    17	= "Windows NT Advanced Server Setup Disk #17"  , TAGFILE = disk17
    18	= "Windows NT Advanced Server Setup Disk #18"  , TAGFILE = disk18
    19	= "Windows NT Advanced Server Setup Disk #19"  , TAGFILE = disk19
    20	= "Windows NT Advanced Server Setup Disk #20"  , TAGFILE = disk20
    21	= "Windows NT Advanced Server Setup Disk #21"  , TAGFILE = disk21
    22	= "Windows NT Advanced Server Setup Disk #22"  , TAGFILE = disk22
    23	= "Windows NT Advanced Server Setup Disk #23"  , TAGFILE = disk23
    24	= "Windows NT Advanced Server Setup Disk #24"  , TAGFILE = disk24
    25	= "Windows NT Advanced Server Setup Disk #25"  , TAGFILE = disk25
    26	= "Windows NT Advanced Server Setup Disk #26"  , TAGFILE = disk26
    27	= "Windows NT Advanced Server Setup Disk #27"  , TAGFILE = disk27
    28	= "Windows NT Advanced Server Setup Disk #28"  , TAGFILE = disk28
    29	= "Windows NT Advanced Server Setup Disk #29"  , TAGFILE = disk29
[ProductType]
STF_PRODUCT  = LanmanNT
STF_PLATFORM = I386
[Files-Inf]
2,	oemsetup.inf,	 SIZE=1000,	RENAME=$(!UG_Filename)
[Files-DLL-NCDETECT]
7, MSNCDET.DLL, SIZE=84480
8, NETDTECT.DLL, SIZE=12800
[Files-NCDETECT]
8,NETDTECT.SYS , SIZE=16384
[LanguagesSupported]
    ENG
[OptionsTextENG]
    NCDETECT = "Netcard Auto-detection Driver and DLLs"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "Netcard Auto-detection Driver Setup"
ProductSoftwareTitle = "Netcard Auto-detection Driver"
ProductVersion = "1.0"
ServiceDisplayName = "NetDetect"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel"
[FileDependentDlgENG]



