  Interact:


  Mouse Test:  ( Manual Page 49 )

      The mouse test permits you to check the functionality of the
  buttons (make sure the screen shows "pressed" when the
  appropriate button is pressed and "released" when released. Next
  it will test positioning on the screen in both character mode and
  graphics (if you have graphics video capability).  Make sure you
  have both full detail and full screen movement in each mode
  tested.


  Joystick Test:  ( Manual Page 51 )

      The joystick test will show you the switches and stick
  position readings for up to two joysticks.  As you press the
  buttons and move the stick, make sure the display acknowledges
  these actions.


  Locate Bad Chips:  ( Manual Page 53 )

      This selection permits you to define the layout of memory on
  your computer's motherboard and any additional boards that are
  installed in your computer.  From information generated and
  displayed in the memory tests, you can directly identify which
  memory chip is failing in your computer.


  Speaker Test:  ( Manual Page 59 )

      The speaker test plays a tune to verify operation of the
  speaker.





  Keyboard Test:  ( Manual Page 59 )

      The keyboard test permits you to check the functionality of
  each key of your keyboard, the type-amatic (key repeat) function
  and the lights for Caps Lock, Num Lock and Scroll Lock.  You must
  first specify which type of keyboard you have.  Non-standard
  keyboards may have certain keys in different locations than are
  shown on the keyboard layout.


  COM Debug:  ( Manual Page 61 )

      COM (communications) debug permits you to test your serial
  ports or modem by viewing the effect of sending certain commands
  to the modem as most communications programs do.
